Premiere Pro CC Media Browser doesn't display a RAID

I'm running PP CC 7.2.0 on a Mac (10.8.5).
I've added an additional RAID (OWC Mercury Elite Pro Qx2 - 16TB) to my Mac Book Pro Retina attached via USB 3.0. However, it does not show in the Media Browser.
Above shows view of my Local Drives.
Above shows view of mouse selected local drives. The OWC drive is "seen" by the Media Browser, yet I can't get it to "mount" as a Local Drive.
I have reset PP CC's prefs with a restart with SHIFT held down. I have unmounted other dirves, guessing that I had too many devices on the USB bus (a silly idea, really - but worth a test) to no avail.
Thoughts?

Hi Alex
I ended up reformatting the OWC drive using File Utility and now it works fine. All I can think is that there's something Premiere doesn't like about how OWC's formatting utility works. The good news is that the drive works great when you finally get it running.
Sean

Similar Messages

  • Premiere pro cc media-browser springt immer auf ersten clip zurück wenn ich einen anderen clip im Vorschaufenster oeffne

    premiere pro cc media-browser springt immer auf ersten clip zurück wenn ich einen anderen clip im Vorschaufenster oeffne war frueher nicht

  • Media wont load or freezes when viewing in Premiere Pro CS6 Media Browser

    Adobe support contacted me on the phone and said that its a known issue if you have multiple formats or codecs when you try to view media in browser in Premiere Pro CS6 & Prelude it wont load or it will freeze. The Adobe support Tech said he would call back, but had  to further research the issue. Its been over 3 weeks and I  never heard back?
    Premiere Pro CS6 & Prelude when trying to view media in browser wont load or it freezes during viewing in media browser. I downloaded CC version and it works fine in both app. I reinstalled both Premiere Pro CS6 & Prelude app to rule that out, deleted pref as well.
    27-inch iMac, 3.5 GHz Intel Core i7, 32 GB 1600 MHz DDR3, OS X 10.9.5 running Premiere Pro CS6 & Prelude
    I have been a long time customer of Adobe products and I hope this issue gets resolved asp!!!
    Message was edited by: Kevin Monahan
    Reason: shortened the title

    Hi Zencuts,
    When you try to view media in browser in Premiere Pro CS6 & Prelude it wont load or it will freeze.
    I'm not seeing that behavior with various kinds of media. If it's a known issue, it's the first I've heard of that.
    Do you have the latest update of Premiere Pro CS6 and Prelude CS6? You can try Help > Updates to make sure. I see you have an iMac on OS X 10.9. What kind of media are you using? Which GPU is in the iMac? Have you updated the drivers recently?
    Your issues may well have to do with your installation of OS X, as well. Certain ways of updating to OS X 10.9 can reset permissions in your Adobe folders so that can cause problems. See this doc: Premiere Pro CC, CC 2014, or 2014.1 freezing on startup or crashing while working (Mac OS X 10.9, and later)
    The Adobe support Tech said he would call back, but had  to further research the issue. Its been over 3 weeks and I  never heard back?
    I'm not sure how you got through to support with a CS6 issue, as phone and chat support is no longer available for CS6 users (except installation issues in the first 90 days and activation issues thereafter). Forums are the only option for support for CS6 users, sorry. That said, the agent should not have promised you a call back and not followed up in some form or fashion. I will see if I can look up the case and let the agent know their error.
    Thanks,
    Kevin

  • Premiere Pro and Media Encoder crash while rendering H.264

    Very recently, a problem's popped up where Premiere Pro and Media Encoder (CC) will crash while rendering H.264.
    It's only while rendering H.264 - other formats seem to work fine.
    And I don't mean that it returns an error, I mean it hard crashes with a Windows "Adobe Premiere Pro CC has stopped working" popup.
    It doesn't crash at a consistent time during the render, even on the same project. Occasionally, it won't crash at all, but this is usually not the case.
    I've tried disabling CUDA and my overclock to no avail. Please help!

    On the topic of opening a project on the exact same version of Premiere Pro CC 2014 (yes it is definitely up to date, and the 2014 version), to overcome this export crash problem that ZachHinchy has brought up - you can't. Technically speaking, one should easily be able to open a Premiere Pro CC 2014 project from one system on another system running the exact same up to date, legitimate version of Premiere Pro CC 2014 without any kind of error. But for some reason, this has been disallowed(?) by Adobe. It has facepalm written all over it. Does anyone agree that this is at least a little bit silly?
    I have tried exporting a Final Cut Pro XML from my project to try and open the sequence at uni on a Mac, so I can render my project when I finish my edit. It half works - the clips are there, but the sequence is gone - i.e. 12 hours of painstaking sequencing and micro-edits that had me at several points in time wanting to insert my hand through my monitor with enough force to make a large hole. I really cannot afford redo this sequence, as my assignment is due tomorrow, and I have to work at 6 oclock in the morning, so I also cannot afford to stay up till the early hours of tomorrow morning. Wish me luck that some miraculous event has taken place overnight that will somehow allow me to just open my project, on the same version of Premiere, on a Mac, without hassle. (Apple OS is not friendly to anything but its own selfish nature, so I am having doubts).
    Adobe please, if you can do anything at all to help, you will save my assignment, and my faith will be restored. Otherwise, I'll just get my money back and buy Final Cut instead.
    I cant even
    If I find a way to fix either of these problems, I will post straight away.

  • Premiere pro and media encoder CC problem

    Hi guys,
    I hope some of you can help me, I installed new version of premiere pro and media encoder CC and now none of them works, I can edit in premiere but as soon as I press export message apears ''sorry a serious error has occurred that requires adobe premiere to shut down'' when I try to open encoder it shut down on startup.
    I'm using old IMac 2.4ghz intel core duo, 2gb 667 mhz ddr2 sdram, ATI Radeon HD 2600 Pro 256 MB, OS X 10.8.5.
    This is the error report, please help:
    Process:    
    Adobe Media Encoder CC [946]
    Path:       
    /Applications/Adobe Media Encoder CC/Adobe Media Encoder CC.app/Contents/MacOS/Adobe Media Encoder CC
    Identifier: 
    com.adobe.ame.application
    Version:    
    7.2.0.43 (7.2.0)
    Code Type:  
    X86-64 (Native)
    Parent Process:  launchd [136]
    User ID:    
    501
    Date/Time:  
    2014-02-10 08:44:28.001 +0100
    OS Version: 
    Mac OS X 10.8.5 (12F45)
    Report Version:  10
    Interval Since Last Report:     
    1264 sec
    Crashes Since Last Report:      
    1
    Per-App Interval Since Last Report:  24 sec
    Per-App Crashes Since Last Report:   1
    Anonymous UUID:                 
    7E711766-8C55-00D3-811F-852F73421407
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Exception Type:  EXC_CRASH (SIGABRT)
    Exception Codes: 0x0000000000000000, 0x0000000000000000
    Application Specific Information:
    terminate called throwing an exception
    abort() called
    Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
    0   libsystem_kernel.dylib   
    0x00007fff9483c212 __pthread_kill + 10
    1   libsystem_c.dylib        
    0x00007fff8d74ab24 pthread_kill + 90
    2   libsystem_c.dylib        
    0x00007fff8d78ef61 abort + 143
    3   libc++abi.dylib          
    0x00007fff96ff79eb abort_message + 257
    4   libc++abi.dylib          
    0x00007fff96ff539a default_terminate() + 28
    5   libobjc.A.dylib          
    0x00007fff8f49d887 _objc_terminate() + 111
    6   libc++abi.dylib          
    0x00007fff96ff53c9 safe_handler_caller(void (*)()) + 8
    7   libc++abi.dylib          
    0x00007fff96ff5424 std::terminate() + 16
    8   libc++abi.dylib          
    0x00007fff96ff658b __cxa_throw + 111
    9   com.adobe.dvacore.framework  
    0x000000010022814d dvacore::filesupport::DirHelper::Create() + 813
    10  com.adobe.AMEAppFoundation.framework
    0x0000000104f285e9 AME::foundation::AppUtils::GetUserPresetDir(bool) + 425
    11  com.adobe.Batch.framework
    0x0000000105c0a842 AMEBatch::Initialize() + 2194
    12  com.adobe.ame.application
    0x00000001000273cb AME::app::AMEAppInitializer::AMEAppInitializer(exo::app::AppInitArgs&, std::basic_string<unsigned short, std::char_traits<unsigned short>, dvacore::utility::SmallBlockAllocator::STLAllocator<unsigned short> >&) + 811
    13  com.adobe.ame.application
    0x000000010000ad6a AME::app::AMEApp::InitApplication(exo::app::AppInitArgs&) + 2426
    14  com.adobe.exo.framework  
    0x000000010513e77a exo::app::AppBase::Initialize(exo::app::AppInitArgs&) + 1066
    15  com.adobe.ame.application
    0x00000001000141a8 AME::RunTheApp(exo::app::AppInitArgs&, std::vector<std::basic_string<unsigned short, std::char_traits<unsigned short>, dvacore::utility::SmallBlockAllocator::STLAllocator<unsigned short> >, std::allocator<std::basic_string<unsigned short, std::char_traits<unsigned short>, dvacore::utility::SmallBlockAllocator::STLAllocator<unsigned short> > > >&) + 1576
    16  com.adobe.ame.application
    0x0000000100056a38 main + 424
    17  com.adobe.ame.application
    0x0000000100003f74 start + 52
    ==========================
    Edited by moderator to trim the crash report down to the essentials. Since these forums do not support attaching file (due to legal and security issues), we recommend uploading files using Acrobat.com’s Sendnow (https://sendnow.acrobat.com) or similar services (YouSendit.com, etc.)

    Hi mawe81,
    Thanks for posting on Adobe forums,
    Please follow this document  http://adobe.ly/1f2EHCg
    and let us know if this fix your issue or not.
    Regards,
    Sandeep

  • .wmv's getting cut in half horizontally inside Premiere Pro, AE, Media Encoder...

    Hello everyone! I'm having an issue using .WMV's within Premiere Pro, AE, and the Media Encoder. Whenever I open the image in a sequence or the source window, the image is cut in half horizontally (see pic below). I brought in an MP4 and had no issues so at the moment I think I have narrowed down to strictly a .WMV problem. The file plays perfectly fine in realtime; audio sounds great, picture (of what I can see) looks good; I am just missing the top half of any WMV file hehe. I have tried the WMV inside AE as well but have the same issue. I also tried to export the WMV with Media Encoder but it exports the WMV cut in half no matter what format I tell it to conver the file to..
    My Premiere Pro, AE, and Media Encoder are fully up to date; my Nvidia 660 Ti is up to date; I just installed latest Windows 7 codec package; Just installed newest Windows 7 x64 updates.
    Also, this is a big one to note...This is the first time I have used Premiere Pro/AE/Media Encoder on this system. I just built this PC about 1 month ago and have had 0 problems with it across other programs (Photoshop, 3ds max, etc..) I just recently installed Premiere, AE, Media Encoder on it and am running into this problem upon my first bootup of Premiere/AE/Media Encoder.
    My system specs are posted below the picture and file specs.
    The pic below shows my setup and the issue I am having. The video of Finding Nemo on the left is the .MP4 (specs on file are below) and the video on the right is the .WMV in question (specs also below.)
    I have tried multiple WMV's of different bit rates, etc, and all of them do this "cut in half thing.." No issues with other file types though!
    The .WMV's specs are.....
    Type: Windows Media
    File Size: 8.5 MB
    Image Size: 1920 x 1080
    Frame Rate: 29.97
    Source Audio Format: 44100 Hz - 16 bit - Stereo
    Project Audio Format: 44100 Hz - 32 bit floating point - Stereo
    Total Duration: 00;00;14;00
    Pixel Aspect Ratio: 1.0
    The .MP4's specs are....
    Type: MPEG Movie
    File Size: 1.4 GB
    Image Size: 1920 x 1080
    Frame Rate: 23.976
    Source Audio Format: 48000 Hz - compressed - Stereo
    Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
    Total Duration: 01:40:47:21
    Pixel Aspect Ratio: 1.0
    Created with: Adobe After Effects CS6 (Windows)
    My system specs are below.
    System Information
       Operating System: Windows 7 Ultimate 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.130318-1533)
               Language: English (Regional Setting: English)
    System Manufacturer: ASUS
           System Model: All Series
                   BIOS: BIOS Date: 04/19/13 17:27:15 Ver: 08.01
              Processor: Intel(R) Core(TM) i7-4770K CPU @ 3.50GHz (8 CPUs), ~3.5GHz
                 Memory: 32768MB RAM
    Available OS Memory: 32706MB RAM
              Page File: 8393MB used, 57018MB available
            Windows Dir: C:\Windows
        DirectX Version: DirectX 11
    DX Setup Parameters: Not found
       User DPI Setting: Using System DPI
    System DPI Setting: 96 DPI (100 percent)
        DWM DPI Scaling: Disabled
         DxDiag Version: 6.01.7601.17514 64bit Unicode
    If I think of any more information which may help narrow this issue down, I will surely post it! Thank you for your help everyone.
    -Mitch

    It appears that Microsoft has issued the fixed update:
    https://technet.microsoft.com/en-us/security/bulletin/ms13-057
    See the "Update FAQ" section:
    "Why was this bulletin revised on August 13, 2013?
    Microsoft revised this bulletin to rerelease the 2803821 update for Windows 7 and Windows Server 2008 R2.
    The rereleased update addresses an application compatibility issue in which WMV encoded video could fail to properly render during playback. Windows 7 and Windows Server 2008 R2 customers should install the rereleased update."

  • E61i internet browser doesn't display properly

    Hello,
    I never had any problems browsing the internet on my E61i. My Nokia is always switched on, but today I had to switch it off for a while. After switching in on again, I wanted to use the internet on it. The strange thing was that it wouldn't display any web page properly any more. Pages look messy, like the web browser doesn't how to handle HTML etc. and display it properly.
    I often visit web pages not specially made for PDA's, so when visiting these I had to scroll horizontally. That was ok. But now when visiting these pages I cannot scroll horizontally any more; the browser puts all web page contents beneath each other, if you know what I mean. Now I can only scroll vertically.
    The conclusion is that many web pages I used to visit have now become useless since the E61i web browser doesn't display them any more as they used to be displayed, the pages used to look like as if you visited them from a PC, but not any more.
    Does anybody have a clue?

    It sounds like a cache issue. When you view the page, that
    page is loaded into your (or your client's) browser's cache memory.
    This is done so that when you return to that page it will load
    faster (since it is already loaded into memory).
    This will only happen if a person has been to the page
    recently. There is a limit on the amount of information your
    browser will store in cache memory. The more you surf, the more
    likely it is that the page will be replaced in the cache memory
    with some other information.
    You (and your client) can, depending on what browser you are
    using, set your preferences so that all web pages will be
    completely reloaded every time you visit them. In IE 6 for Win:
    Tools>Internet Options>Settings> Select 'Every visit to
    the page'. You can also set your cache to be the minimum amount of
    space alotted. Note: This doesn't really work very well in IE 6 for
    WIN. I use firefox for reviewing changes because I have found IE 6
    is completely unreliable for viewing the latest.
    Most other browsers will allow you to hold down Shift and hit
    'refresh' to throw out the cache for that page and view the latest.
    As far as I know this is standard operating procedure for proofing
    new pages.
    If there is a coding technique to force a browser to use only
    the latest information, I don't know what it is.
    Good luck.

  • Every time I try to access the ASPX pages, the browser doesn't display the pages. Instead, a popup box asks if I want to open or save

    every time I try to access the ASPX pages, the browser doesn't display the pages. Instead, a popup box asks if I want to open or save

    What site is doing this? 99% of the time it is a problem with the headers sent from the web server.

  • My safari browser doesn't display as it normally should

    my safari browser doesn't display as it normally should with all the colors/animations/pictures.  I've tried the 32 bit mode, I've tried restarting safari, I've tried and even after the update in safari and the OS, it still looks like this.  What can I do to fix it?

    Hi adidas --
    Double check your Safari preferences.
    Make sure in "Appearance" that "Display images when the page opens" is checked.

  • Some browser doesn't display the MW page correctly

    after installing Maintenance Wizard 2.17, some browser doesn't display the MW page correctly, some menu function is missing. The display problem is not for everyone, some user's browser have no problem. Some user's IE are displaying it correctly. i.e. one user has both IE and firefox working, however, after she clear her java cache, both browser refuses to display the MW page correctly.
    The resolution of PCs is set to the same value. however, the size of the text isn't. after changing the size of the text, some of our pc start to work. The display web page for MW doesn't show the right most menu item. After resize the screen, we find it is because of the blue frame for the MW page that stop to dynamical stretch up to 20 inches.
    The menu item is been streched out of the blue frame, they are no longer displayable
    any ideas?

    We have the same problem.
    And find it is caused by a combination of your screen resolution, font size and browser window size.
    The blue frame that displays the Oracle Mainentance Wizard banner doesnt dynamical strech to the full window size.
    After experiment with it, MW can display much better in our case.

  • Premiere Pro CS6: Media Manager Issue

    I can´t use Premiere Pro CS6 media manager. It begin analyze project but then come couple error messages. All my graphics files are .psd, all my video files are 4K .r3d and all audio is .wav files. Does Adobe team trying to solve this problem already? Below are links to the screen capture images about issue.
    https://www.dropbox.com/s/qbnj7ctnzir21hn/premire_CS6_error.png
    Dropbox - premire_CS6_error#.png

    I would recommend doing all your file work with a proper file manager, like Finder.

  • Premiere Pro CS3 Media Encoder question...

    Hi,
    I got a question regarding the Premiere Pro CS3 Media Encoder.
    I am converting a sequence in Premiere Pro CS3 which contains footage from a '.vob' file which is NTSC, 720x480, 16:9 to a '.flv' file.
    Now I'm doing this via Premiere Pro CS3 Media Encoder and it let's me choose the Width & Height but there is no checkbox to keep the proportions - which I find is very, very inconvenient...
    So if I wanna convert this to a .flv file which is 400 high, the width should be 600, right ?
    Also, there is no way to specify to keep the 16:9 aspect ratio.
    Is that done automatically or how/where can I specify it ?
    Thanx for your help in advance !
    Mike

    If you want 16:9. you need to consider that the lower number should probably be divisible by 72. So, if you want something about 600 wide, I would use 360 for the lower number which gives you a frame size of 640X360
    When divisible by 72, it is evenly divisible by both 8, which is great for encoders, and 9, which is the frame ratio you want.
    Just choose square pixels and you will be fine.

  • How do I download the trial of premiere pro cc? It doesn't have it on creative cloud

    How do I download the trial of premiere pro cc? It doesn't have it on creative cloud

    https://creative.adobe.com/products/premiere

  • Premiere Pro and Media Encoder CC Crash when exporting to h.264...

    Anybody have any idea why something like this might happen?
    Also, our adobe creative cloud download center that is linked to our desktop doesn't show up anymore. The frame for it initializes but there are no options in it and the settings panel won't even let us log in.
    Very confused.

    Can't help with the Cloud questions... but Premiere Pro has a dedicated forum http://forums.adobe.com/community/premiere?view=discussions
    When you ask your PPro questions there, the information you need to provide when you ask a question... PPro Information FAQ http://forums.adobe.com/message/4200840

  • Adobe Premiere Pro CC / Media Encoder CC Crashing On Export

    Hi,
    I have a 1 hour project consisting of
    - iPhone 5 Video clips recorded at 1080p/30fps using app FilmicPro
    - Various Image files, imported as PSD's
    - WAV Sound files
    My Sequence Settings are:
    Export Settings are:
    As you can tell by the file name, i already installed ALL updates.
    I just installed a new graphics card (GTX 770) a few days ago, but these crashes were happening before i installed the card, and now after I've installed it, so it's not related at all (before i was just using my CPU (Intel HD 4600). (At the moment I have CUDA enabled).
    Full Specs
    - Windows 8.1 Pro
    - Adobe Premiere Pro 7.2.2
    - Adobe Media Encoder 7.2.2
    - Intel i7 4770k
    - 8GB RAM
    - NVidia GTX 770
    The crashes always happen at the exact same place on both Premiere Export and Media Encoder, no idea what's causing it, I've played around with the settings and managed to export it a few times but not at the quality I want. If i render my entire sequence preview's first, and then export using preview files then it exports fine using MPEG Preview. Not exactly the format/quality I want though, if there is anything i have missed out then please ask, I do intend to check the boxes for Maximum Bit Depth and Maximum Render Quality
    P.S. I have already tried
    A) Clear Media Cache
    B) Reinstall Premiere/Media Encoder
    C) Change Location of Project Files
    Thanks,
    Jay

    Hi Jay Singh,
    Thanks for posting on Adobe forums.
    Please try to check the resolution on the PSDs in the Project. and Make sure that the resolution should not exceed more than 1920*1080. This is could be the issue on crash on export.
    Let us know if this will help.
    Happy Editing,
    Sandeep

Maybe you are looking for

  • How can I remove updates from my I-pad

    How can I remove updates from my I pad

  • FileNotFoundException while deploying ear-file

    Hello I just tried to deploy my ear-file with the DeployTool DeployTool->Load Ear->Connect to Server->Deploy The deploying process always stops at 50-60% with the following Error: Message ERROR: NOT deployed. The Deploy Service returned the following

  • Help making a treepage in htmldb- Carl/Scott please have a look

    How do I make a tree page of this data? create table Flatfile (Pgroup varchar2(30), Pclass varchar2(30), Manufacturer varchar2(30), Article varchar2(30), Price Number(6,2)); Insert into Flatfile Values ('Application Software','Database Software','Ora

  • SGA Cnfiguration?

    Anyone, I am just curious if there are rules of thumb to the ratio of DB Buffers to Shared Pool for best DB performance. I use DBArtisan which gives me a graphical representation of the SGA for ea db when I connect and I have one of my DB showing a p

  • The import weblogic.utils.collections.MultiMap cannot be resolved

    Hi, I imported a project from weblogic to eclipse. I'm getting the below mentioned error "The import weblogic.utils.collections.MultiMap cannot be resolved " Added the necessary weblogic jar files to the project in eclipse. Kindly help me. Thanks in