Premiere Pro CC - Multicam going black when exiting/switching workspace

Hello everyone,
New poster here. I'm editing footage of a live CD recording and experience trouble with multicam editing.
First, I synced all my cameras (9) to audio in a first sequence. I then exported each video track of that sequence to low-res, 720p proxies. My hard drives sadly can't cope uo with 9 AVCHD flux playing simultaneously in multicam mode. I then create a second sequence, in wich each track is a different camera angle. I don't use the "Create a source sequence for multicam" feature, beacause I plan to replace the tracks with the HD files once Im done with the multicam cuting, wich I think You can't do with that option. Plus, . Finally, I do the multicam editing in a third sequence.
The problem: each time I switch workspaces or exit Premiere, some parts of the third sequence show up black, while some stay alright. The cuts are not gone, nor is the camera choice, but for some chunks of the sequence, all the cameras show up black. The tracks in the multicam source sequence are fine, as are the video files. See the 2 screenshots below for more clarity.
Here, everything wotks just fine (camera 8 is black, was offline at this time)...
and here, all my clips show up as black, event though the source sequence is fine.
Needless to say, it's incredibly frustrating. I can't understand why some parts of the edit show up perfectly fine and others don't. Has anyone ever encountered this problem? Found a solution?
Thaks in advance for the help!

HI everyone
I noticed one mote thing for this orblem: the part of my tracks that appear "black" all hve the little triangle markers that indicate the beginning and end of my clips. So, it seems that Premiere believes this part of the timeline to be individual clips and do not see them as cuts of a longer clip. Strange...

Similar Messages

Macbook Pro 15" 2010 display goes black when opening PPT

My Macbook Pro 15" 2010 main and secondary display goes black when opening some PPT documents when connected to an external monitor. Has anyone else experienced this issue and if so, what was the solution?
What I have:
2010 Macbook Pro with Snow Leopard (all latest updates)
Office 2011 - with all latest updates
Acer 24" monitor (all attached monitors go black)
Thanks for the help in advance and let me know if I can provide any additional information.

My Macbook Pro 15" 2010 main and secondary display goes black when opening some PPT documents when connected to an external monitor. Has anyone else experienced this issue and if so, what was the solution?
What I have:
2010 Macbook Pro with Snow Leopard (all latest updates)
Office 2011 - with all latest updates
Acer 24" monitor (all attached monitors go black)
Thanks for the help in advance and let me know if I can provide any additional information.

Premiere Pro CC Multicam - 2 camera angles being split into multiple tracks

I love CC's multicam feature, but keep having this problem:
In Pluraleyes, I would lay all my Cam 1 material on video track 1 (multiple clips), then Cam 2 on video track 2 (multiple clips), add my audio, and create a multicam track that kept all Cam 1 clips on track 1 and all Cam 2 clips on track 2.
in Premiere Pro CC, multicam creation can only be exectued via the browser, not the timeline. So Premiere syncs everything up and throws each clip onto the next video track up, leaving you with a mountain of timeline media that reads out tiny and jumps all over the place when viewed in the multicam monitor (see picture).
What I'm after:
- the ability to create multicam sequences based on the timeline (lay out all clips from each cam on whichever video track I want, select all, then choose "create multicam sequence") so that the end result isn't 20 video tracks I have to manually collapse into 2 (time waster).
Help Adobe?
thanks
jesse

I know this is a rather old post, but have been having a play with multi cam for a while and watching a few videos so help this helps.
What I do to get rid of extra cameras that are generated with each new multicam process.
The process im mentioning is very briefly mentioned in this clip : Adobe Premiere Pro CC Tutorial | Performing Multi-Camera Editing - YouTube
Once I have made my multicam source file.
Drag to new sequence icon (similar to what is done with a clip and want to make a quick sequence from clips properties.)
You will have the green nested footage (this will have multicam enabled by default.
Ctrl + Double Left click the green bar. This reveals all the clips and audio.
Arrange the clips onto which ever video layer you want (each representing a Camera)
Double click the the sequence created to reset the sequence to have the green bar for editing but with only 2-3 cameras as desired and not the 12 you dread.
First time poster, sorry if not overly clear.

My 13 in MacBook Pro screen randomly goes black. It was purchased in 2010. It's a 10.6.8.

My 13 in MacBook Pro screen randomly goes black. It was purchased in 2010. It's a 10.6.8. It started just recently. The only thing I can think of is is that my 7 year old son played an online game with the computer. I did check the "hot corners" settings and that is not the issue. When the screen goes black, I generally end of foce shutting it down with the power button.

My 13 in MacBook Pro screen randomly goes black. It was purchased in 2010. It's a 10.6.8. It started just recently. The only thing I can think of is is that my 7 year old son played an online game with the computer. I did check the "hot corners" settings and that is not the issue. When the screen goes black, I generally end of foce shutting it down with the power button.

Premiere pro cs6 multicam editing

hI all!
How can I do a Premiere Pro cs6 multicam editing when there is a "audio only" clip too? for exemple when there is an external service audio recording?
Selecting the clips and right clic the create source multi-camera menù command is deactivated, and this option is not available; why doesn't it work?
thank you all.
Luigi

You can always do things the original (and often better) way.
Manually.

N95 screen goes black when in between open and clo...

Just noticed today that the screen goes black when sliding open or closed. Screen comes back on when slider reaches open or closed. Is this like the blank screen fault that affected so many N80s ? I'm very disgusted that I have to pay to fix my 16month old (expensive) N95 for an ongoing issue with Nokia sliders that they HAVE NOT fixed in their design. Very poor support Nokia.
Nokia 808
Nokia CK-200

Scott your grieviences are justified... but there is always a solution to a problem...even if this is a strange problem to be handled in an off the routine way, be it so... once again best of luck! not blame nokia for anything...nokia rules as always and nokia's productions have become very slow now :-( i wish they could make trendy phones like sony, sleek and stylish with new features.in some ways, nokia gets a little boring with no new features.. i dont feel any differnce between the nokia n95 8gb, n96 and n85(which i currently own)!
Scott lets hope for the best :-)
What's Worth Doing, Is Worth Doing Well!
All "N-series" are incredible!

Screen goes black when coming out of screen saver. HP Pavilion,p7-1414 desktop, windows 8

the monitor shows the windows 8 screen with the apps, then the screen saver will come on. Then when I try to bring it out of the screen saver mode the screen goes black and nothing I do will get it to go back to the windows 8 screen. Then the mouse pointer will disappear. So I end up having to shut down the computer using the power button. If I have the screen set up for the old style windows 7 and it goes into the screen saver and I bring it back there's no problem.
fleamarketlady

Hello fleamarketlady,
Your computer goes black when it comes out of sleep mode some times.
Make sure that you are only using one cable to connect the monitor to the computer.
Open up command prompt and run the following command SFC /scannow.
This will scan the system files and correct any errors that it can.
Here is a link to command prompt.
When you go to open command prompt, right click and run as administrator.
If you are still having the problem you can perform a system refresh.
This will uninstall windows 8 and reinstall it without affecting your personal information.
Here is a link that will walk you through the steps for a refresh.
Let me know how everything goes.
Have a good day.

Premiere Pro CC 2014.2 crashes when "locating media"

The problem;
Premiere Pro CC 2014.2 crashes when "locating media". I am working on a project that has not given me any problems for the last 200 hours. About a week ago I notice that the .proj file size was 276mb and found this odd because my largest project to date was never larger than 80mbs. I thought that the premiere was running slow because of the project size. As luck would have, when my client made their their final changes 2 days ago, I opened the project and premiere would hang on the locating media window and then would crash. I called Adobe and spent an hour on the phone with them to no avail.
Project workflow
- 700gb of 5d footage
- 20 sequences under 5 minutes
- Dynamically linked files with AE
- Warp Stabilized about a dozen clips of under 5 sec
- On every sequence color correction adjustment layer with RGB Curves, Three way color corrector and sharpen filter
- I kept old versions of the sequences (I was in version 5 before the crash)
What I have tried;
- Unsuccessfully tried to open auto-save files for this project.
- Successfully opened other older non relevant project
- Removed Mercury playback engine in the project settings
- Cleaned out media cache database through pp in media Preferences
- Manually deleted cache files in /Common/Media Cache Files and /Common/Media Cache
- Tried importing sequences into new .proj file; it would crash as a result.
What "worked".
I was able to open it on another computer. save it under another file name. bring it back to my original computer and open it without problem. I lost about 3 days working through this problem, I missed my deadline. and angered the client. I was able to use a friends IMAC to "fix" the problem, however I can't always count on him being there if it happens again.
Questions.
- What the hell happened? Why could I open it on one computer and not on the other?
- Is there a way to fix a corrupted .proj files on a PC?
- What should the average file size be, before it becomes unstable? (I'm pretty that my file size was bloated by all the previous versions of the sequences)
Windows 8.1 64bit
Premiere 2014.2
Intel Quadcore i7-4770 3.40GHz
16gb Ram

Hi,
I would suggest the following steps:
http://blogs.adobe.com/kevinmonahan/2014/09/10/premiere-pro-cc-freezing-on-startup-or-cras hing-while-working-mac-os-x-10-9-and-later/
Run a disk permission repair on your boot drive, and
Reset Home Folder permissions and ACLs Error | Apple Support Communities
Thanks,
Rameez

After watching a youtube video in fullscreen on my Macbook pro, the display goes black and my laptop get stuck...

After watching a youtube video in fullscreen on my Macbook pro, the display goes black and my laptop get stuck...
And I need to reboot everything from the power button...
It's just the second time it happens. What it depends from?

Hello DarlinDodson,
I'd recommend taking a look through the following article that can help get your MacBook working with your TV again.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Cheers,
Allen

I'm using CS6 created a new document. trying to use my layers and my work keeps going black. when I

I'm using Photoshop CS6, created a new document. trying to use my layers and my work keeps going black. when I click on the workspace i am able to see my work but when I move my mouse any little bit it goes black again.

Good day!
Does turning off »Use Graphics Processor« in the Performance Preferences and restarting Photoshop have any bearing on the issue?
Regards,
Pfaffenbichler

IPhoto going black when using the contract tool

my picture goes black when im trying to edit using the contrast tool!
what the heck.. any advise?

Do the other tools work correctly in the edit mode? Try the following: delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your User/Library/Preferences folder. If that doesn't help launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select the first three options.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

Premiere pro 5.5 stops working when playing a sequence, saving a project or closing,any ideas why?

I can open a project, import files or other projects, but when I want to play the sequence the program stops working and closes. When I try to save the project or close the program I get a "software not responding" message.
I hope someone can help me with this as I cannot work on any projects.
thanks.

Hi john,
thanks for taking the time to help me. I have updated the software and rendered the files and now I am able to play them, but still neither the sequence nor the clip play/show on the corresponding screens, I can only hear the audio file. I also continue having problems when saving the project, the software stops working and I get the "non responding" error from microsoft.
As you suggested, and I have to say I am pretty much a dummy with the codecs and alike, I installed the mediainfo and run one of the files.
This is the info that appears on the screen
I am not getting any error messages from Premiere, so I am kind of stock. If you need other info let me know.
Thanks for your help and patience.
Arantza
Date: Mon, 23 Apr 2012 09:12:15 -0600
From: [email protected]
To: [email protected]
Subject: premiere pro 5.5 stops working when playing a sequence, saving a project or closing,any ideas why?
    Re: premiere pro 5.5 stops working when playing a sequence, saving a project or closing,any ideas why?
    created by John T Smith in Premiere Pro CS5, CS5.5, & CS6 - View the full discussion
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037What is a CODEC... a Primer http://forums.adobe.com/thread/546811What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037.Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing.For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/enFor Mac http://mediainspector.massanti.com/.http://blogs.adobe.com/premiereprotraining/2011/02/red -yellow-and-gree n-render-bars.html.If you have a red line over the timeline after importing a video and before adding any effects... your project is wrong for your video... read above about codecs.Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project.H.264 will NOT work inside an AVI http://forums.adobe.com/thread/854115.More information needed for someone to help... click these links and provided the requested information-http://forums.adobe.com/message/4200840-http://forums.adobe.com/thread/416679.For CS5 and later, the easy way to insure that your video and your project matchSee 2nd post for picture of NEW ITEM process http://forums.adobe.com/thread/872666
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4354727#4354727
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4354727#4354727. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Pro CS5, CS5.5, & CS6 by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

My iPod touch goes black when I try to face time. Can anyone help with a fix.x

My iPod touch goes black when I try to use FaceTime. Can anyone help.x

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>FaceTime and sign out and then sign back in
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Display goes black when in a call

I have noticed an annoying feature with my Nokia N8: The display goes black when in a call (holding the phone to my ear). When the call is finished I have a difficulty to close the call. Is this a Nokia special feature for saving battery that can be turned off or is it an error?
Solved!
Go to Solution.

Hey Is1987Is! Sorry you are having this problem.
It is normal behaviour for your screen to go black when held near your ear.
Is your screen just not coming back on once you finish your call or take it away from your ear?
Incase it is a bit more of a serious case of your phone having a black screen after hanging up a call. You can try this troubleshoot.
To make sure your proximity sensor is not over sensitive causing your phone to have a black screen, during incoming and outgoing calls aswell as alarms.
First thing is try to verify sunlight/IR oversensitivity with a typical desk lamp.
This could be done by making a phone call (or setting alarm) and putting the phone under the desk lamp when the phone is ringing (or alarm activated).
If phone is oversensitive to IR, display should go blank caused by IR radiation from desk lamp.
If this is the case you should take your phone to your Local Nokia Care Point, and they will be able to fix it for you!
I hope this helps, let me know if your phone goes black screen during an incoming calls when you test it under the lamp!
Sheldrick
Press the 'Accept As Solution' icon if I have solved your problem, Kudos my post if my advice has helped you!

Have a 3 yr old iMac the screen goes black when using it it will come back on when you move the mouse thanks for your help Dave

Have a 3 yr old iMac the screen goes black when using it it will come back on when you move the mouse thanks for your help Dave

It's possible you've got a 'hot corner' set up. If you have and move the mouse to a certain corner of the screen it'll do as you describe. Have a look in System Preferences>Mission Control, bottom left of the window click on the 'Hot Corners' button and see if there is anything in there.

Premiere Pro CC - Multicam going black when exiting/switching workspace

Similar Messages

Maybe you are looking for