Premiere Pro CC QuickTime DNxHD showing red video since last update

I had to re-export some media at a lower bitrate and opened a project file I started back in November to find two of my clips show a red screen where the video used to play fine. Both .mov clips have the same properties:
Type: QuickTime Movie
Image Size: 1920 x 1080
Frame Rate: 23.976
Source Audio Format: 48000 Hz - 16 bit - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00:01:32:11
Pixel Aspect Ratio: 1.0
Video track 1 contains 2 type(s) of video data:
Video data block #1:
Frame Size = 1920 x 1080
Compressor = 1080p/23.976 DNxHD 115 8-bit
Quality = High (4.00)
Video data block #2:
Frame Size = 1920 x 1080
Compressor = 1080p/23.976 DNxHD 115 8-bit
Quality = High (4.00)
Any idea why this would have stopped displaying correctly in the past couple months? This is happening on both of my Windows 7 64-bit workstations, running the most recent versions of the cloud apps.

Not that this will help, but I'm having the same issue with a batch of Avid DNxHD Quicktimes I just received for use in After Effects. I'm having a problem with bright areas of the video turning magenta when used in 16 bit color space in AE CS6 and AE CC. So I thought I'd bring the clips into Premiere CC to see what they looked like. The clips start and end with a frame of white, with video in between. The white frames show up, but all of the video is 100% red.
The clips look fine in Quicktime player and Final Cut Pro 7.0.3
This is on a Mac (OS 10.7.5) running Premiere Pro CC 7.2.1.
Here are my specs:
Type: QuickTime Movie
File Size: 121.9 MB
Image Size: 1920 x 1080
Frame Rate: 29.97
Total Duration: 00:00:04:20
Pixel Aspect Ratio: 1.0
QuickTime Details:
Movie contains 1 video track(s), 0 audio track(s), 0 closed caption track(s), and 1 timecode track(s).
Video:
There are 140 frames with a duration of 25/749ths.
Video track 1:
Duration is 0:00:04:20
Average frame rate is 29.98 fps
Video track 1 contains 2 type(s) of video data:
Video data block #1:
Frame Size = 1920 x 1080
Compressor = 1080p/29.97 DNxHD 145 8-bit
Quality = Most (5.00)
Video data block #2:
Frame Size = 1920 x 1080
Compressor = 1080p/29.97 DNxHD 145 8-bit
Quality = Most (5.00)
Timecode:
Timecode track 1 contains 1 type(s) of data:
Timecode data block #1:
Start Time = 01:00:28:10
Reel name =
A bug maybe? As a test I ran the clip through After Effects, outputting one Quicktime with DNxHD 220, 10-bit and one with DNxHD 145, 8-bit. Both play fine in Premiere Pro.
If I make a snippet of the clip in Quicktime player the resulting clip plays as red in PP, and exhibits the artifacts in AE.
Shawn Marshall
Marshall Arts Motion Graphics

Similar Messages

Premiere Pro CS5.5 Not Showing Correct Video in Sequence - URGENT

I have been working on a film that I need out by next Wednesday and for some reason Premiere is showing the WRONG videos in the timeline/viewer. I have done numerous edits in After Effects via Adobe Dynamic Link. It replaces other video with random clips I've done edits to in After Effects via Adobe Dynamic Link instead of the correct video file, either edited in After Effects via Dynamic Link or just a plain video clip without editing in After Effects. This is extremly frustrating in that I have to have the film out by next week and this has never happened before! Any response is welcome!!

when I try to open a changed name comp in After Effects, it automatically directs me to another project and I didn't even click open
Do you have multiple AE projects that contain comps with the same name? For example: Project01 contains comp01, and Project02 also contains comp01? If so, you'll have to sort that out as well. Give the projects and the comps in them unique names if they will all be used in the same Premiere Pro project.
Consider using a single AE project that contains all your linked comps -- it will make the Replace With After Effects Composition command in Pr less useful, but it may help simplify and organize things overall.
Once all of your AE projects and comps are re-named, you may have to go through your Pr project and manually re-link all of the AE comps. Maybe I shouldn't have said "everything will sort itself nicely".
Jeff

Problem with switching from taking a photo to going to video since last update.

Since my last update My IPad will not switch from camera to video is anyone else having this problem and what can I do to fix it?

Odd...I was going to respond to this thread but when I tapped on the question I saw that 3 people had already responded so I laid off. Yours was the only answer that I was convinced was wrong and yet you solved the OP's question.
No matter how many times I swipe my finger from the middle of the screen to the right, the options do not change for me. Landscape or portrait - doesn't matter. I have to swipe up or down - not to the right. If I swipe up and down, then the options change.
You are really seeing this behavior by swiping to the right in the camera app in iOS 7?

Adobe Premiere Pro to Quicktime - iPod Video

I have a question about going from a video editing system such as Adobe Premiere Pro - to Quicktime. I have been exporting my Premiere Pro videos to AVI files and then opening them in
Quicktime and exporting them to iPod compatible video. Is there a way to go right from Premiere Pro to Quicktime? Cause right now, I have to do an extra step - export the AVI and then export that AVI to Quicktime MP4 iPod compatible video.
This method takes an awful long time - even for a 20 minute clip of video. Any suggestions? If I can't go directly from Adobe Premiere to MP4 - is there a smaller file I can export to first so that when I export that file to MP4 it will render quicker then an uncompressed AVI file?
Thanks!
Foochuck

It depends on how connected Premiere is with QuickTime. In most apps that can export QuickTime, when you install QuickTime 7, a new QuickTime option (export to ipod essentially) becomes available. However, there ARE apps that use QuickTime directly and would have to be altered to allow access to new modes.
After you get your uncompressed .AVI, if you're using QuickTime Pro's iPod export, it's creating an H.264 file of high quality and that WILL take a VERY long time. I would like to see a comparison chart of encoding times so anyone could tell how long an encode is likely to take, but I don't think one exists.
There ARE tools out there that use the older H.263 codec, and as such are much faster (and there are some that may even be faster at H.264 compression) but they're not as easy to use. You can do a search in the iPod forums here to find one that's right for you.

Error "Premiere Pro could not find any capable video play modules" on Mac Book Pro with Intel Iris Pro 1536 MB Graphics

Hola: Después de haber estado leyendo bastante acerca del error
Adobe Premiere Pro no pudo encontrar ningún módulo capaz de reproducir vídeo. Actualice los controladores de visualización de vídeo y vuelva a empezar.
No he encontrado ayuda sobre cómo solucionar este problema en un ordenador Mac Book Pro dotado de tarjeta gráfica Intel Iris Pro 1536 MB.
¿Podría alguien ayudarme a solucionarlo?
Muchas gracias.
Hello: After having reading a lot about this error:
Premiere Pro could not find any capable video play modules
I haven't found any help about how to solve this problem on a Mac Book Pro computer with an Intel Iris Pro 1536 MB graphic card.
Can anybody help me to solve it?
Thank you very much.

Dual video problems - Do you have dual graphics adapters?
IF YES, read below
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-link to why http://forums.adobe.com/message/4685328
-http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2
-Mac Utility for dual adapters http://forums.adobe.com/thread/1017891?tstart=0

Premiere cc 2014 crash with message "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again."

I updated to Premiere Pro CC 2014, all the other Adobe CC 2014 software works great, but Premiere doesnt even load. The starting page (frame) comes up - my whole computer slows down and after a minute or two it crashes completely and comes up with the message : "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again."
I'm running a macbook Pro 15" (2014) with 16GB RAM and 760GB SSD.
PLEASE HELP!

Hi Delarey,
Please go to the following location and rename the folder to old_folder name
User/user library/Application Support and rename Adobe folder
User/user library/Preferences and rename the Adobe folder
Then go to Documents folder and Go to Adobe/Premiere pro/8.0 and rename 8.0 folder
Make sure that you are in user library if you are not sure check the link below.
Access hidden user library files | Mac OS 10.7 and later
Regards,
Vinay

Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again.

I have administrator rights to the computer. The drivers are up to date. But I am still getting the error message "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again" when opening Premier Pro CS5.5. This appears to have happed after I upgraded to Mac OS 10.10.2.
Anyone?
Thanks

Hi Stan.
I had the same problem as you did though I am using Adobe CC. I saw nobody replied to you so perhaps my eventual success on my later version may have applications to the error on your version.
Anyhow, I did all the suggestions found here (Error "Premiere Pro could not find any capable video play modules" | Startup ) first and updated my NVidea card to no avail. Eventually what did the trick was this...
After mucking about with the video card, I said "OK lets just have a go at Premiere itself." So I uninstalled Premiere CC and reinstalled it. Now for some reason it didn't give me the latest patch but a slightly earlier version than the current one but lo and behold it was fine with the video card again. I was able to get my friend's video imported and quickly edited but then was having some issues with exporting where it would hang up but I went into Adobe Media Encoder and exported it there without a care. That task out of the way, I then went and made the update to the latest patch and it works perfectly fine - no video driver issues.
So short of it is this - if you've updated your drivers, perhaps what you could try uninstalling and reinstalling Premiere.
Let me know if this works.
Cheers and good luck

Premiere Pro CC could not find capable Video Module

Hello, I have looked all over for the answers to this problem and nothing I have found all over the forums is working. Here is what my system is:
CPU: Intel i7 960
24GB RAM
GPU: Quadro 4000
I have the latest drivers for the Quadro which I updated after I suddenly got this error I think after I did the latest CC Update.
The error is: Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again.
I have only seen people that have AMD/ATI cards get this error or people that have the switching technology in laptops.
I have done the following:
Updated Video Card Drivers
Run As Administrator
Checked to Make Sure My Card Was In The Supported Cards List (I already knew it was because everything worked before.)
I don't know what my next options are. I have a lot of work to get done too so I need to get this working. Any help will be much appreciated. Thanks!

Hello, I had the same problem. Even after a new installation.
Solution: Media Player update as well as VLC Media Player from the original website installed. (Http://www.videolan.org/) then reboot. Now everything works. The problem was probably missing video codecs

Premiere Pro could not find any capable video...

And yes:
I tried everything what was suggested at this Page:
Error "Premiere Pro could not find any capable video play modules" | Startup
So...
Yesterday everything was fine, today nothing works...
I can't start Premiere Pro CC, After Effect CC and the Media Encoder CC as well Audition CC starts after feeling hours of time...
Can anybody help me?
System Information:
OS: Win 7 64-bit Pro
CPU: Intel Core i7-4790K Box, LGA1150
Mainboard: ASRock Fatal1ty Z87 Killer, Sockel 1150, ATX
GPU: ASUS GTX770-DC2OC-2GD5 DirectCU II OC, GeForce GTX 770, 2GB GDDR6
SSD: Samsung SSD 840 Pro 128GB
HDD: WD Black 1TB

Hi ml-learningby,
Have you tried updating your GPU drivers?
Thanks,
Kevin

Premiere Pro and Soundbooth won't play video/audio for more than a second.

Ok, so my issue is that Soundbooth won't play audio for more than a second. It plays a quick bit then stops. Premiere Pro also does the same with video, it plays a quick bit then stops. I don't know if it is connected or not but when I try to change the audio output in Soundbooth to System Default I get this error:
I set the permissions to premiere and soundbooth to full but it didn't work. I've tried UnInstalling and ReInstalling but that didn't fix the issues either. All of the other programs seem to work. Any help would be much appreciated!!

Here is the fix.
1. Open Finder and navigate to /YOUR_HD/Library/Preferences
2. Rename or move to the Trash the file: com.apple.audio.AggregateDevices.plist
3. Relaunch The Program

Since last update, Pro Cam broken

Hi there,
a few days ago there was an update for the Nokia Pro Cam on my Lumia 920. Since this update I've had some issue with the App.
When I tap the App-Icon, the app starts and the App loads up. When I now take a picutre (every option is on auto) I beeing dropped back to the homescreen. When I tap the Icon again, again the App loads up and when I tap the pictures-bubble to see the pictures I've taken I also get back to the Homescreen.
When I use the Nokia Smart Cam App, everthing works great.
I'm using Windows Phone 8 GDR3 (developer preview) on my Lumia 920. My Provider is O2-Germany.
DerSia
Solved!
Go to Solution.

Pro Cam app is now Nokia Camera, does it still show as Pro Cam on your phone? If you have not installed Nokia Camera yet, then you can update/install through this link -> Nokia Camera
The silence will fall

Getting a permission error clicking "Show new posts since last visit".

If I click "Show new posts since last visit" after I have read a thread, I will get a "You do not have permission to access this page.". This is starting to get a bit annoying. Please look into it.
Birger

http://bbs.archlinux.org/viewtopic.php?id=83076

Since last update I do not have a "delete" button showing on a toolbar. Therefore, I cannot delete emails without opening them. Please help.

Since last update I do not have a "delete" button showing on a toolbar. Therefore, I cannot delete emails without opening them. Please help.

Ask Apple to re-enable it. I had an unauthorized purchase last October. They disabled my account until the problem was solved. However, I asked them to reopen it, and they just asked me to provide some security information (billing address, a recent purchase you made, etc.), and then they re-enabled it.

Premiere Pro CS5 Quicktime Import Problem

Hi Everyone,
I am having a problem importing Quicktime .MOV files into Premiere Pro CS5. When I import .mov files (I've tried several; some I've created myself from AE5, others are purchased from third party libraries) the file shows up in the PPro CS5 project bin, but can't be previewed by dragging into the Source Monitor (system spins for 1-2 minutes, then PPro Source Monitor just shows a gray backround, no video present). If I drag the file to the timeline, the system will again spin for 1-2 minutes and then the Program Monitor will just display a black video frame. If I try to play the timeline, the audio will play (if present), but the Program Monitor will show black with occasional "flashes" of a frame from the .mov file. If I try to render the timeline nothing really happens except the estimate time to finish increases with no end in sight (3 minute clip was showing 20+ hours remaining before I killed it).
On the same machine, I can view the .mov files just fine using Quicktime 7.6.8, AE 5, and even PPro CS4.
I am running Windows 7 x64, 9GB memory, Core i7 Processor, Multiple HDD's (per Adobe recommendations), and a nVidia GFX740 card. I've updated PPro CS5, Quicktime, and nVidia drivers all to the latest version this week.
Does this sound familiar to anyone? Any ideas of how to fix this problem?
/BILLW

Although you speak sooth, it is I believe rather impulsive to think that the simple answer was meant to be an evangelistic approach for using .mov in final production.
I only edit final productions in native formats or professional intermediates.
But, how about doing rough storyboard edits where you are burning the many endless midnight hours (hmm, like now maybe, and I just ran out of coffee and smokes?!) fleshing out a story or script, or knocking out an animatic or honing in on the details out of a cinematic script - and while that creative candle burns, you are rapidly pulling together whatever material in whatever format you can find to rough together your ideas before you lose that thought - often over the weekend for a presentation to investors or some such on a Monday. Sometimes, my friend, all you have is what you get. And when I am creatively doing a pitch or preparing for an on-set walkthrough or a meeting with pre-production, and all I have are .mov's from whereever thay came or a crappy home office scan or a repro of an old 16mm film of a POW camp that someone copied onto VHS by projecting it off a painted concrete block wall and then shot that with an old VHS camera, and whatever 20 generations later you are handed a .mov of that to put together a final script concept while the originals get dug up.....My Friend, you have to be able to rapidly put your thougths and concepts together without limitations to your equipment and you don't have time to mess around with codecs you don't have when you are in a pinch. And some of us aren't mathematical codec wizards either -- we just need to see something and see it now.
After all, this is Planet Earth we are living on isn't it? And rare is the idyllic, calm, cool, breezy day absent from the pounding heartbeat of production!
And in those desperate moments, there have been a few times I will confess I needed to pop a .mov file (from wherever its birth may have been I will never know) into premiere and it wouldn't go. And in a rush like that with no sleep, I don't care. I ran it though QT Pro. I guess that makes me a sinner from Arcturus.
From a professional point of view, there are many ways to use premiere. Like I said, often preparing for a final edit in a production house with an editing team on an Avid or whatever system. And on the creative side, I use it often to develop my scripts or my projects before I walk on set to direct or produce or have a meeting with the pre-production crew. And there are many others including of course, the beloved, finished, polished edits that go straight to broadcast -- which premiere does a great job.
For a final production, .mov, nope. (Although I have had animation houses swear by the .mov animation.)
Feel a little better now?
Cheers!

Premiere Pro CC crashes when browsing/importing video files.

I've got a trial version of Premiere Pro CC installed today, running on a late 2012 iMac.
No problems during splash screen or project startup, but when I try browsing for a video file in the import box or attempt to drag and drop files from my local disk, a Premiere prompt says a fatal error has occured and shuts down. I haven't experienced this problem on other PCs/Macs.
The files I've tried all run smoothly when opened by VLC or QuickTime. Extensions tried so far: .avi, .mkv, .3ggp.
NVIDIA GeForce GTX 680MX 2048 MB
3,2 GHz Intel Core i5
8 GB 1600 MHz DDR3
OS X 10.8.5 (12F45)
If there are codec issues, trial version limitations or these types of files are not supported I would hope PP would say so instead of crashing abruptly?
Any help appreciated, I'm not an editing guru.

Premiere does not have trial limitations.
If vlc plays the files is no garantee Premiere will.
Premiere does not support mkv.
Premiere only supports dv-avi and 3gp.

Premiere Pro CC QuickTime DNxHD showing red video since last update

Similar Messages

Maybe you are looking for