Premiere Pro CC's sequence lost. Is there a way to "search" for it from outside the project?

I seem to have lost a sequence created in Premiere Pro CC. I can't find it anywhere inside the Project bin.
We have so many same-name, older projects (between Auto-Save, different drives and so on) that looking inside each of them would take forever.
But we do know the name of the sequence. I am wondering if there is a way to "search" for a sequence name from outside the project?
Thanks

there is a way to "search" for a sequence name outside of the project,
but it would be a pointless waste of time.
sequences are only saved within the project file itself!!
We have so many same-name, older projects (between Auto-Save, different drives and so on) that looking inside each of them would take forever.
better get at it then!
hahahahahahahaha!!!

Similar Messages

Is there any way to search for a term using the Firefox search field, and have the results automatically open in a new tab?

Is there any way to search for a term using the Firefox search field, and have the results automatically open in a new tab? When there was support for Google Toolbar, I was able to do this; now, whenever I want to search for something, I have to open a new tab to do it, and cut-and-paste my search into the search field in the new tab. I used to be able to highlight, drag, and drop something into the search field and have it automatically open in a new tab. This is enough for me to switch to Chrome . . .

Set a preference to have searches from the Search Bar (upper right) automatically open all searches in a new tab
#type '''about:config''' in the URL/Location/Address bar and press the Enter key
#if you see a warning, accept it (promise to be careful)
#Filter = '''browser.search.openintab'''
#in the lower panel, double click the item (or right-click and choose "Toggle") to change the value to "true"
#close the about:config tab and test
#See:
#*For help with opening/using about:config, also see: http://kb.mozillazine.org/About:config
#*Also see: http://kb.mozillazine.org/About:config_entries (click on "Browser", scroll down to browser.search.openintab)
'''Search Bar''': http://support.mozilla.com/en-US/kb/Search+bar
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
About Google toolbar............
Google decided that they will no longer produce the Google Toolbar for Firefox 5 and newer version. It is best to move on to other alternatives than to try any "hacks" to the toolbar that may or may not perform in the future. Future versions of Google toolbar will only work with IE7-9. Google Toolbar is not available on any other browser, even Google's own browser.
*http://googletoolbarhelp.blogspot.com/2011/07/update-on-google-toolbar-for-firefox.html
*https://support.mozilla.com/en-US/kb/google-toolbar-not-compatible-firefox?s=google+toolbar&r=0&as=s
*http://www.google.com/support/toolbar/bin/answer.py?answer=1342452&topic=15356%29
*Google Toolbar 8 FAQ (IE only): https://www.google.com/support/toolbar/bin/answer.py?hl=en&answer=1111588
'''''To access your Google Bookmarks visit''''' www.google.com/bookmarks.
Alternatives:
*http://kb.mozillazine.org/Using_Google_Toolbar_features_without_toolbars
*https://addons.mozilla.org/en-US/firefox/addon/googlebar-lite/
*https://addons.mozilla.org/en-US/firefox/addon/gbookmarks-google-bookmarks-fo/

HT201285 Is there a way to search for deleted texts on the iphone 5c?

Can I recover texts I have deleted?

Yeah, but 1Password charges for both the iPhone client AND the Mac/Windows client, and it ain't cheap! Plus, it only syncs via Dropbox, and where I work Dropbox is banned due to security concerns.
Sure, there is Secure Notes, a free form entry part of 1Password, but a bug in the program will not let you view all the text you can put in the field!! You have to EDIT the text to see the whole list! What if you accidentally delete or change an entry while scrolling through your entries??
Plus NONE of the programs I have tried, and I have tried a lot, can find text IN the file - do a search and it will tell you what file/folder the text is in, but YOU have to scroll down through 400 entries one at a time looking for the entry.
I use a program called Secure Text - I have many admin passwords, and DO not need a field based program. Secure Text is totally freeform entry. However, it suffers from the same search issue.
If someone knows of a secure text program that uses a file/folder type of layout, free form entry, AND can actually tell you where in the file/folder the text you searched for is, PLEASE let me know! Plus sycing via some method other than Dropbox would be a plus.
Before I got my iPhone, I used a program called Tombo for my WinCE based system AND my Windows workstation, and the synced up fine without iTunes, internet, DropBox type functionality or any of that horsecoller stuff Apple likes to throw on your neck.

Is there a way to search for and install all uninstalled fonts? I'm getting bored of opening all the files up.

I've got a file of about 100 typefaces, which is 1000s of fonts. I want to install them all but I dont want to have to open each file and install them all individually (or in small groups).
So is there a way to search for and install ALL uninstalled fonts in one hit?
Cheers.

The best solution I've come across so far is to dump all movies into a shareware app called iVI. It'll show whether each movie has subtitles or not.

Is there a way to search for audiobooks or books in different languages?

Hi well my question is very simple. My native language is Spanish but I am a German citizen and I would like to read one or the other book in Spanish or listen to audiobooks in Spanish. But if I want to search for these products in my German iTunes-Store I will only get the newest German books or German audiobooks.Is there a way to search for an audio book or a book in Spanish or other languages? Thank you very much!!!

Exactly that -- the procedure is described in the online Help: InDesign Help | Text variables
Now every time you insert the variable named "# of potatoes", you'll see the text "50" appear (with a minimal rectangular marker to indicate it's a variable), and when you want another number of potatoes, all you have to do is adjust the text in the Variables dialog.

HT1657 Is there a way to search for movie rentals only? I don't want to buy movies and I'm tired of clicking on a movie only to find out its for purchase only

Is there a way to search for movie rentals only? I don't want to buy movies and I'm tired of clicking on a movie only to find out its for purchase only?

The best solution I've come across so far is to dump all movies into a shareware app called iVI. It'll show whether each movie has subtitles or not.

Is there a way to search for movies on iTunes that have subtitles?

Is there a way to search for movies on iTunes that have subtitles?
I know if you look at any individual movie, it will say CC and below that, it will tell you if closed captioning is available in English or another language. I'm just wondering if there is some way to search for all the movies that have this available since many of them don't.

The best solution I've come across so far is to dump all movies into a shareware app called iVI. It'll show whether each movie has subtitles or not.

Is there any way to search for bad blocks in my Macintoshi HD without formating it? I'm experiencing too much I/O problems...

Is there any way to search for bad blocks in my Macintoshi HD without formating it? I'm experiencing too much I/O problems...

Check the drive health with the free demo of SMART Utility.
http://www.volitans-software.com/smart_utility.php
Reformatting and zeroing out might keep a drive going a bit longer, but once bad blocks become noticeable, it's not a drive you should trust any longer.

Is there a way to search for skipped songs in my iTunes library?

I'd like to know whether there's a quicker way to find songs that are being skipped in my iTunes library, than simply manually checking each one. I've been rearranging and deleting music files in Windows Explorer recently, so I know that there is a chance that I have demolished the link iTunes had to some of the files, but there's no way I can remember what all the modified albums are. I know how to reestablish the links when I do find a song that is being skipped, but I'd love to go through the whole library and be able to find them all at once.
The last time I did this, manually - and it seemed to take hours - I did find quite a lot of songs that were being skipped, and was able to reestablish the links or in some cases just delete the song from iTunes since i hadn't wanted it anyway. But even then it was a little hard, since after manually checking in the quickest way I could - going through the song list and briefly playing each one for a second or fraction of a second - there was no way of sorting the songs by whether they were skipped or not. I just had to be very careful as I scrolled, to catch each one that had the symbol indicating non-playability.
All that to say - is there some better, automatic way of searching for non-playable, skipped songs, and is there some way of sorting them out from the rest so one can address them, and not miss any?

Same question. Used to have an iPod. Lost it (best digital player ever), now I use other portable device. The mp3 files have their id3tag edited in the original file, but the .m4a don't!.
Want to know someway to write the info from the library to the original .m4a files.

Is there a way to search for photographs that are missing?

I have discovered that some shots that I thought had been imported from iphoto are in fact missing (when I go to open them there is a badge with the yield sign and an exclamation point in it)
I don't think this is the end of the world as I have the original files in various places and can import them (I guess)
but is there a way to search to find all the shots that are missing?
right now I'm having to scroll through the whole database in the list format and I have a lot of shots. can't seem to figure out how to do a search for missing shots…
m

1. Create a smart album and in the drop down in the top right corner select file status
2. Check mark the file status box and select 'Offline'
Now you should have all your 'Offline' (Yellow Exclamation and/or Red Slash) files.
To reconnect..
1. Select the missing files.
2. Go to File and scroll to Manage Referenced Files
The dialog box will have one of the photos selected
3. Select the drive and folder that contains the referenced file and select it
4. Click 'Reconnect All'
This might not reconnect all of them, but the dialog box will still be open and you can reconnect the ones left.
Narvon
Message was edited by: Narvon

Is there a way to search for games in the app store based on genre

how do you search for games based on genre for example i want to search for all games under the role playing game genre?

There does not appear to be. In Settings/General/Accessibility you can reverse the type of some things from black on white to white on black. You can also set up your iPhone to read text selections to you.

Is there a way to search for damaged/corrupt files in itunes?

Hi all,
I have several itunes-purchased files that became damaged when a hard drive of mine went on the fritz a few months ago. I managed to get most of my files transferred to a new hard drive, but I keep running across songs that are corrupt. The way I know they are corrupt is they just won't play, even though the file shows up in my library no problem.
My library is several thousand songs. Is there any way to test for corrupt songs without going song-by-song manually?

Sorry, but I don't know what it is you are trying to accomplish and how a spreadsheet program would be related to an iTunes issue. Can you please explain in more detail what it is you're trying to do? If your command of the English language is a barrier for you, try posting in your native language and someone who is fluent in that language may be able to help.
Regards.

Is there a way to search for a file within a site defined in Dreamweaver?

I know you can search for phrases within a file's code, but
what if I have defined an extremely large site in Dreamweaver with
thousands of files in it and then I search for a file with the
phrase "contact" in it? Is there a way to do this in Dreamweaver or
is there an extension that would add this functionality?

On Thu, 24 Jan 2008 01:50:58 +0000 (UTC), "MartinUCSD"
<[email protected]> wrote:
>I know you can search for phrases within a file's code,
but what if I have
>defined an extremely large site in Dreamweaver with
thousands of files in it
>and then I search for a file with the phrase "contact" in
it? Is there a way
>to do this in Dreamweaver or is there an extension that
would add this
>functionality?
Of course
Edit | Find and replace
put in the "content" in the Find box - select Find in Entire
site and
click Find all
~Malcolm N....
~

Project Web App (PWA)/Sharepoint 2013: is there any way to display two different views of the Project Center PWA web part to the same user in a site collection?

i want some of my users to see all the projects in the Project Center at my top-level site, and those same users to see only the projects they own at a subsite level in Project Center. that way they could see an 'all project' view on the homepage and only
their projects on their dashboard pages (which also have an instance of Project Center web part on them). i have searched and searched but cannot find a solution to this. is there any way to acheive this functionality? thanks in advance for your assistance!

I have tried this in the past, but was not successful, as far as I can recall. Once you access the project center webpart in one page, the view will be retained regardless where you see it again. (until you apply a different view or clear your browser cache).
May be an easier solution is to display a 'report' on the home page with ALL projects (much easier to do), and use the Project Center webpart for the My projects view as it is easier to achieve via Project Server Security, than a report.
Cheers,
Prasanna Adavi, Project MVP
Blog:
Podcast:
Twitter:
LinkedIn:

Is there a way to prevent AD users from accessing the VPN?

I have ASA 5510's that authenticate users to the Active Directory. Is there a way to prevent users, that even though they are validated through the AD from being to establish a VPN connection?

Haven't tested this lately, but with the ipsec client, you used to be able to go to an AD user's "dial-in" tab, and there was a check box there for "allow remote access" or something that. If this was checked, they could authenticate via IAS, if not, they couldn't. This allowed only selected users within AD to use the VPN. Not sure if this is still the case, but it's a start...

Premiere Pro CC's sequence lost. Is there a way to "search" for it from outside the project?

Similar Messages

Maybe you are looking for