Premiere Pro CC shortcut keys not working

I have downloaded the trial version of premiere pro and I found that all the keyboard shortcuts do not work at all. Basic things like delete, copy,cut and undo don't work, as well as ever other shortcut. Does this have to do with the trial version, or is there something I can do to fix this.
Thanks

jcellini, heilirqxx, andrewsamson and everyone else this forum
thanks for the kudos. feels good to help. i actually joined the forum hoping to find an answer to this specific problem never thinking i'd be the one to hit on the solution. no genius just a lot of luck and perserverance.
my knowledge of CS4 is rudimentary and my work is rather pedestrian, so its good to know there is a "community" where one can find help and support. maybe it will help me take my work up a notch or two
happy thanksgiving everybody and again thanks

Similar Messages

PP CS6 PageUp & PageDn shortcut keys not working

Heads up... This may look like a simple topic that's been covered before, but read on and you'll see it's different.
I've been using Premiere since v5.5 (Windows 95, not CS 5.5!). I use lots of shortcut keys for all my apps. Premiere has always used PageUp and PageDn to move the cursor to the next edit point (any cut video or audio clip). In PP CS6, I went into change the shortcut keys for those two commands to the same ones I've been using for years. PP CS6 has two sets of options for cursor movements: Selected Track(s) or Any Track. The Any Track is the way it's worked before in earlier versions of PP. I set the Any Tracks Next/Previous to PageDown and PageUp respectively. The actual keystrokes appear in the hot-key window when I press them so I know PP sees the keys and knows what they are.
When I saved the shortcuts and went to the timeline... nada. PgUp and PgDn do nothing. This has nothing to do with selected video tracks as I'm using the Any Tracks option. To do a further test, I changed the shortcut keys to Ctrl+PgUp and Ctr+PgDn for Any Track. When I tested that out, it worked perfectly. So this appears to be a bug of some kind. I've been using PgUp and PgDn for many years. I certainly don't want to have to hold the Ctrl key down while Paging Up and Down to move around the project from clip to clip!
Does anyone have a solution to this one?
Thanks for your help...

"But you can set any shortcut key to suit whatever keys you have available."
Yeah, I know, but every now and then I have to reinstall and then there's the agony of changing again from the defaults :-( In the end, like 'em or hate 'em, sticking with the defaults usually makes for an easier life. I say that as someone who has been commercially programming since 1967 and forced to use practically every crazy language and stupid machine ever invented ;-)

Adobe Premiere Pro CS5 Dynamic Link not working as part of Production Premium CS5

I ran into a situation whereby I recently reinstalled my Production Premium CS 5 onto a new computer and when trying to run the Dynamic Link out of Premiere PRO CS 5 to create a new After Effects composition, After Effects tried to start up but then crashed with the error that Production Premium was needed.
Yet, I had Production Premium CS5.
(Note: The crash didn't occur when I simply tried to use Dynamic Link without anything selected in my project or timeline - but the moment I had a clip in my timeline selected to work on it, the dynamic link would not work as covered above.)
In checking around the forums I found various answers to this problem such as rebooting the computer, reformatting hard drives and/or whatever. This all may be correct.
However, as I just went through that nightmare, I was not anxious to do that again. So, I called Adobe and the following solution solved the matter in 5 minutes:
1. Close all your other Adobe applications such as After Effects.
2. Open up Premiere Pro CS5 and then deactivate it by going to HELP>DEACTIVATE and then Permanently Deactivate.
3.Close the application and restart Premiere Pro CS5.
4.Then do the same to Activate it.
5. Have your serial number handy and plug it in when prompted.
Solved it right away and worked beautifully.
Not to say there couldn't be more complicated situations, but the above worked and the simpler the better is good for me. And I thought I would post this in case anyone else ran into this problem.

Thanks for posting your solution.

Shortcut keys NOT working when publish to PDF full screen

We have a series of modules that are published to pdf and the animations run inside the pdf file. We use the Tab shortcut key quite a bit as it simulates the natural progression between form items.
This works fine when viewing the pdf in standard mode. But when you right click on the PDF and go full screen, the Tab key fails to work. It wants to place emphasis on the playback controller.
Has anyone experienced this issue, and do you know the workaround?

If the PDF's page content is not renderable text (e.g., the scanned image/picuture of characters or outlined fonts (which are graphics (a "picuture")) then there is nothing for the Highlight Comment tool to work with.
So - two trials.
Acrobat's Preferences set to permit "U" to make use of the Underline tool.
Each trial done in Full screen.
#1 = a PDF with scanned stuff. Press "U". Tool is available but unable to highlight anything.
#2 = a PDF with renderable stuff. Press "U". Tool is available & can place highlight over selected characters.
Be well...

Staroffice 8 Zoom Shortcut keys not working

(Solaris 10, Staroffice 8 U3 rev 2, Sunray)
The shortcut keys for zoom in Drawing and Presents used to be the "+", "-", "/" and "*" keys (with num lock ON).
The issue:
The + and - keys still zoom in and out, but the / and * keys no longer zoom anything
What I am expecting:
The "/" should zoom to the "selection" and the * key should zoom to the page
Notes:
- the "zoom" button is enabled in a toolbar, and it changes to the appropriate "icon" when I hit the / and * keys, but nothing happens to the view
- I have tried this with different keyboards.
- I have tried this on openoffice on a mac, with similar results
Could this be a bug, or is it something i'm missing?
Cheers,
- jd

Also the toolbar icons are not working as expected.
When I'm pressing zoom-in or zoom-out the position of the worksheet is shifting to another coordinate.
Zooming in to a specific point is not possible, so I have to zoom-in first and then reposition the worksheet next.
Zooming out also ends up with an extra repositioning of the worksheet.
DM is 3.1.1.703, OS is windows 7.
Any feedback if this is reproduceable on other installations.
Walter

Certain action shortcut keys not working

In my Captivate 5.5 training simulation, I want users to click Ctrl+C and Ctrl+V. I've tried inserting a transparent click box and setting the shortcut to Ctrl+C. On success is set to go to the next slide.
When I preview the training and I press Ctrl+C on my keyboard, nothing happens. I don't get the fail message and the slide doesn't advance.
If I set the shortcut to something else, like Ctrl+L, it works fine. I'm guessing that certain Windows keyboard combinations are not allowed as shortcuts? Is there a way around this?
Thanks!

Hi,
Like you said, it is not working when you keep a shortcut, which is same as a Windwos Default shortcut for certain action, even the Cp User Guide does not recommend to have a conflicting Shortcut --
"Note: If your Adobe Captivate project is displayed in a browser, set keyboard shortcuts that do not conflict with common browser shortcuts. For example, F1 is frequently used as a keyboard shortc"ut to display Help. The Control, Alt, and Shift keys map to the Control, Option, and Shift keys on Macintosh® computers, respectively."
When such a conflict arises in project shortcut to System Shortcut, the System shortcut takes precendence and it overrides the project shortcut.
Thanks!
Anjaneai

Adobe Premiere pro CS6 effects presets not working

Presets in my Adobe Premiere pro CS6 is not working. What can I do? I need Work with Effect Presets
Message was edited by: Kevin Monahan

What do you mean "not working" What's not working? What are you wanting to do?
More information please.

Premiere Pro CS6 Dynamic Link not working

Hi,
Just wondered if anyone has seen issues with the Dynamic link options in Premiere Pro CS6, all the options to work with After Effects are greyed out although this product is installed.
However I only have CS5 for after effects, is this a compatibility issue or am I doing something wrong here?
Thanks in advance for any assistance.
Kind Regards
Steve

Dynamic Link only works within one version, so you can't use it between CS6 and CS5 or CS5.5 and with older versions you had to have a complete suite, not individual products.

Satellite Pro A10 - some keys not working with new keyboard

Hi all
I hope some1 can help with this
i have a Satellite Pro A10. The prob i have is a.b.n.and enter keys are not working and its a new keyboard
i fitted into my other A10 and all keys work so keyboard is fine.
All works ok with usb keyboard. Had motherboard out all seems ok.
Any help plz
chris....
Message was edited by: widgy

Hi
Why do you think that the motherboard is ok?
Maybe its a keyboard controller issue
Did you check if the cable was connected properly?
In my opinion if you are 100% sure that the keyboard is ok then the issue must be related to the motherboard because there is no other part which is placed between the keyboard and mobo.
Bye

Message ShortCut Key not working properly

Hellow every one, guys i am encountrying a problem regarding my nokia e5 , i've just bought it recently and still left with 8 months warranty. The problem i am facing is, the message shortcut key which is on the keypad of this Phone, is not working properly. When i do long press to open new text msg, it sometimes doesnt opens any thing and sometimes even open messaging and then close it. At a certain angle i have to apply a little more force in order to operate it properly. Please help me wheather its a hardware problem or any sort of dust particles have emerged inside the keypad resulting in loose contact of the button and the motherboard.
REPLY ASAP.

Hi Shanam,
Welcome to the forum
Thanks for joining the community, if you believe there is an issue with your device that is preventing you from optimizing all the options available to you.
I would advise for you to bring/ or send it for repair. Keep sending us your replies and comments on the forum.
Kind regards.
Carl
If this post answers your question, you can help others by clicking the green accepted solution' button.
Please ask your questions to the main board and not to my mailbox. Thank you.

Captivate 7 Button Shortcut Keys Not Working

In captivate 7 I have several button interactions that worked in 5.5, but do not work in 7. I am using shortcut key combinations (i.e. CtrlC and CtrlV) to have the user navigate to the next slide. I have replaced the interactions and they still do not work. Any ideas?

I will provide more information. The files I am working with were created in Captivate 4. We moved up to Captivate 7 and these files had to be processed through Captivate 5.5 so I could open them in Captivate 7. The tasks being trained involve Systems Training where the user enters keystrokes, like the Enter key, and several key combinations, like Ctrl + C, Ctrl + V. In Captivate 4, to simulate these functions, I used the Transparent Button with No Mouse Click and the Shortcut Key or combinations. I had no problems, everything worked fine. When I was cleaning up the new Captivate 7 file, is when I noticed the key combinations (i.e. CtrlC, CtrlV) no longer allowed the project to navigate to the next slide. It does not produce a failure or show the Failure caption. It is like it is accepting the key combination as valid, but not performing the action to navigate to the next slide. The only way I found to get around this issue was to uncheck the Visible in output check box.
I was also recreating some of these files from scratch in Captivate 7 and did notice unchecking the Visible in Output box would cause the button to be ignored and the project would just continue. I did notice the keystroke combination setting in the Shortcut on the button does not work. Even in a clean Captivate 7 file. Further testing showed this is somewhat erratic. For instance if I assign CtrlA or CtrlN as keystroke combinations, the project navigates as expected. If I use CtrlX the same problem occurs as with CtrlC and Ctrl+V. Also, the Failure caption does not display when using a wrong keystroke combination. It only works with single keys, not to include Ctrl or Alt. In Captivate 4, the Failure caption displayed correctly with the keystroke combinations.
I am using Captivate 7 (32 bit) with Windows XP SP3 on a Pentium 4 with 4 Gb of RAM. I know…extremely slow, but this is the best the state would provide. I hope this information has made things a little clearer.
Steven J. Dey
Curriculum Developer, OU-CPM
Oklahoma Child Support Services/OKDHS

Brightness shortcut keys not working in Windows 8 or 8.1

I'm no longer able to use the brightness shortcut keys after I've installed the Lenovo power management tool in Windows 8 on a Ideapad U300s.
When the Lenovo power management tool is NOT installed on the system, pressing the shortcut keys brings up the Windows UI in the upper left hand corner of the screen and the display bridghness is adjusted accordingly.
However, as soon as the Lenov PM software is installed, the Windows brightness indicator shows up ONCE and I can no longer adjust the brightness with the shortcut buttons.

Welcome to the Apple Support Communities
At the moment, there aren't any Boot Camp drivers ready for Windows 8, so it's normal that you have problems. Wait until Apple updates Boot Camp drivers, normally with a OS X update

Shortcut keys not working

On my Mac (OSX 10.9.5), the 'step backwards' shortcut key (cmd-alt-z) isn't working; nothing happens.
On my Windows (Windows 7) pc, the 'step forwards' shortcut key (ctrl-shift-z) isn't working.
If I go into the shortcut menu and change the shortcut key, it doesn't let me change it back to the original shortcut (cmd-alt-z) and I have to reset the keybindings.
I have tried resetting preferences. All of the keys on both keyboards work, and I can use those keys as shortcuts in other software. I'm using photoshop CC (2014).
Any suggestions to get the shortcut keys working again?
Thanks,
Ben

If you have Photoshop CC or older, install the WhiteWindowWorkaround plugin.
And install the MacOS 10.10.1 update.
if you have any other queries please reply
Thanks
pre launch apartments

Shortcut keys not working on my iMac (Lion) keyboard?

this happened late last week. my shortcut keys worked fine, but now nothing is working ( ©c, © a, © , etc.). tried restoring back to default in system prefences and repaired the HD in disc utility, but no luck. is this just a bug that apple need to fix? thanks

Which shortcuts?
F3, F4, F11?

Shortcut keys not working in CS6

Since upgrading to CS6, any single-key shortcuts aren't working.
For instance, pressing "M" to change to the marquee tool does nothing, but "Command-T" (for Transform) works fine.
This little bug keeps me from changing any of the main tools, which hurts workflow pretty badly.

Ah! Looks like there's a preference for it under General > Use Shift Key for Tool Switch.
All is well in the world now.
Thanks!

Premiere Pro CC shortcut keys not working

Similar Messages

Maybe you are looking for