Premiere Pro CC Speichert Fehlerhaft!!

Sehr geehrte community!
Ich habe seit dem 10.04.2015 Kostenpflichtig ein Adobe CC Abo bestellt.
Meine Arbeit verrichte ich mit einem Windows 8.1 64-Bit Laptop mit 8Gb RAM, Intel Core i5-3317U CPU und 750GB speicher, davon ca. 50% frei.
Fehlerbeschreibung:
Ich habe gestern ein Projekt angefangen und habe mehrere stunden damit verbracht mehrere videos in einklang mit einem musik titel zu bringen. Nach ein paar Stunden Arbeit, habe ich beschlossen ein wenig frische Luft schnappen zu gehen. Ich habe also das Projekt abgespeichert und geschlossen. Nach meiner Pause wollte ich weiter machen... Ich öffnete also das Projekt und habe meinen Augen nicht trauen können.... ÜBER 80% DER ARBEIT WAREN VERSCHWUNDEN!!! Ich ging den Auto-Save Ordner durch und fand das Projekt zwar, aber im selben zustand wie das bereits geöffnete Projekt. WUTENTBRANNT versuchte ich der ursache des Problemes nach zu gehen und fand nichts im WWW. Ich habe mal testweise ein neues projekt geöffnet, ein video in die sequenz eingefügt, das Projekt auf dem Desktop gespeichert und geschlossen. Anschließend habe ich das Projekt nochmal geöffnet, 3 weitere Videos eingefügt, jedem video einen cut verpasst, auf eine andere leiste verschoben, erneut gespeichert und geschlossen.
BEIM ÖFFNEN DES PROJEKTS BEFAND SICH NUR EIN VIDEO IN DER TIMELINE
wie kann sowas passieren..... vielleicht hängt das ja mit einer Creative Cloud Synchronisations geschichte zusammen, wäre meine vermutung.
Ich bitte panisch, schnellstmöglich um hilfe!

Hi,
Sorry to hear about your experience.
Do you have multiple sequences in the project?
The only other instance I have seen this happen is Premiere would not open the sequence I was working on. It opened up a different sequence. I found the sequence in the project bin and opened it. All my work was there. I suspect something like that might have happened unfortunately.
Check If the sequence is the right one.
Thanks,
Rameez

Similar Messages

Premiere Pro zeigt After Effects Komposition fehlerhaft an

Hallo,
Ich habe ein Problem mit der Dynamic Link Verbindung zwischen After Effects CC, Premiere Pro CC und dem Media Encoder. Wenn ich eine After Effects Komposition in Premiere Pro importiere, zeigt mir der Vorschau Bildschirm eine fehlerhafte Vorschau an. Probleme treten vor allem bei Kompositionen mit Ray Traced 3D Elementen auf, wie 3D Schriften und Lichtebenen.

Hi Patricia,
Can you please post this in the appropriate forum? This is the Premiere Pro forum. Here is the link to the Downloading, Installing and Setting Up forum: Downloading, Installing, Setting Up
You can also contact support: Contact Customer Care
Thanks,
Kevin

Premiere Pro CC 2014 / Projektmanager fehlerhaft?

Hallo,
mir gelingt es derzeit nicht meine aktuellen Filmprojekte, die zur Bearbeitung auf einem Raidsystem lagern mittels Projektmanager auf eine externe Archivplatte zu kopieren.
Ich erhalte permanent, nachdem die Datenübertragung schon 2/3 gelaufen ist eine Fehlermeldung. " Schwerwiegender Fehler - Projekt bitte speichern und erneut versuchen"
Bis vor kurzem lief dieser Befehl aber fehlerfrei. Wie kann ich nun meine Projekte sicher archivieren und mein Radialstem wieder freimachen?
Warum funktioniert das denn nicht, selbst von Projekten die am MacBook unterwegs erstellt wurden, also andere Hardware, geht es auch nicht.
Mir scheint dass sich mit dem letzten Update hier ein Bug eingeschlichen hat.
Oder gibt es eine andere Erklärung??
Danke für ein Feedback.

投稿ありがとうございます。
Premiere Pro CC 2014 (Adobe Media Encoder CC 2014)では、FLV及びF4Vでの書き出しはサポートされなくなりました。
（英文になります。近日翻訳予定）
removal of FLV and F4V export features from Adobe Media Encoder, After Effects, and Premiere Pro | After Effects regio…
FLV及びF4Vでの書き出しは、Premiere Pro CC( Adobe Media Encoder CC)の7.2.2までとなります。
Premiere Pro CC　7.0 は以下の方法でインストールでき、利用可能です。
【お知らせ】最新のCCではなく、CS6をインストールする方法
※Premiere Pro CC 2014のプロジェクトファイルは、下位バージョンのPremiere Pro CC 7.xで直接開くことはできません。（下位互換がございません）
FLVやF4Vで書き出したい場合は、お手数ですが、いったんファイル書き出しし、再度Premiere Pro CC 7.x (Adobe Media Encoder CC 7.x) やCS6にファイル読み込みし、FLVやF4V書き出しを行います。

Wiederhergestellte Clips - Premiere Pro

Seit einiger Zeit habe ich in Premiere Pro mit wiederhergestellten Clips zu kämpfen.
Öffne ich ein bestehendes Projekt, befindet sich des öfteren plötzlich ein neuer Ordner namens "Wiederhergestellte Clips" in der Projektstruktur.
Darin befinden sich in der Regel Titel, welche aber nicht irgendwann gelöscht wurden, sondern ganz normal im Projekt vorhanden sind.
Bei diesen Titeln wird angezeigt, dass sie in einer Timeline verwendet werden. Ein klick auf das kleine Dreieck bringt aber keinen Eintrag hervor.
Lösche ich dieses Ordner erhalte ich die Meldung, dass die Clips eben in einer Sequenz vorhanden sind.
Dies stimmt aber nicht, da die Originale der Clips ja noch existieren und in den Sequenzen eingebaut sind.
Lösche ich diesen Ordner dennoch, enstehen keinerlei Konsequenzen.
Leider erscheint dieser Ordner aber nach jedem Öffnen des Projekts erneut. Auch wenn man ihn löscht, das Projekt speichert, schliesst und wieder öffnet.
Da Premiere Pro fälschlicherweise glaubt, dass die Clips in verwendung sind, aber nicht anzeigen kann wo, gehe ich von einem Softwarefehler in Premiere aus.
Leider ist im Internet dazu nichts zu finden.
Hat jemand bereits ähnliche Erfahrungen gemacht?
Gruss

Einfach mal den Projektcache bereinigen. Das klingt einfach nach übriggeblieben, ungültigen Hashwerten nach einem Crash oder was auch immer udn das programm denkt eben anhand dieser Sicherheitswerte, dass da noch was ist.
Mylenium

AVI und Mjpg Datein werden nicht angezeigt/Premiere Pro cs4

Hi Leute,
Ich habe ein record Programm mit dem ich videos aufnehme (ingame) zumbeispiel,diese Programm speichert die Videos als .AVI und codec MJPG.
wenn ich diese videos jetzt bei adobe Premiere Pro cs4 einfügen will läd er immer nur ein frame also wie ein screenshot.Auch bei anderen .AVI datein von meiner cam funktiert es nicht.Die tonspur funktioniert aber.
Auf meinem Rechner sind diese Codecs vorhanden hab auch schon alle möglichen codec packs ausprobiert alo müssten die beiden vorhanden sein,im Mediaplayer oder Moviemaker funktionieren die videos auch.
Nun meine Frage ist,wie kann ich jetzt den codec für premiere pro cs4 installieren oder wie bekomme ich das hin das das endlich geht ich verzweifle schon.
wäre schön wenn einer von euch eine antwort auf dieses Problem hat,es gibt viele Leute die dieses Problem haben aber bei google recherchen hab ich auch keine Lösung gefunden die das Problem aufhob.
Danke schonmal..
MFG B@SIx

an der Leistung kann es sicherlich nicht liegen.
Was für'ne Grafikkarte? Könnte alles entscheiden. Generell deuten solche starken Probleme auch oft auf Hardwaredefekte hin, also gleich mal in die Kiste reinguggen, ob die Karte überhaupt fest im Slot sitzt oder irgendwelche sonstigen verdächtigen Anzeichen zeigt.
Mylenium

Media Encoder CC conflicting with Premiere Pro CC

Why does Adobe Media Encoder pause while exporting a video when I try to edit another video in Premiere Pro?
On the older version I was using before I upgraded, they would both run simultaneously.
Also, is there a phone number that I can call to get direct support from Adobe?
Computer Specs:
Mac OS X ver 10.9.5
2.7 GHz Intel Core i5
16 GB 1600 MHz DDR3
Intel Iris Pro 1536 MB
Software:
Adobe Premiere Pro CC
Ver 7.2.2 (33)

Ask in the Premiere forum.
Mylenium

New (8/14) Macbook Pro Retina - Premiere Pro CC 2014 spinning beach ball

Help! Seems my shiny new wiz-bang 4-core Macbook Pro with 16 GB of Ram and a 512 solid state drive works just fine with Adobe Premiere Pro CC 2014 until my project reaches a certain size, then it won't open the project and immediately gives me the deadly spinning beach ball. The only way to exit is to force quit whereupon I get the "Sorry, a serious error has occurred...". Aggravating beyond words.
Saw one forum comment where it was recommended to update to the 6.0 CUDA driver, but not even sure I have a CUDA driver. Plenty of space left on hard drive. In Premiere Pro preferences under the "Memory Tab" it doesn't seem to matter if it's set to "Optimize rendering for.... Memory or Performance." I've reinstalled the Premiere Pro App twice. Doesn't help.
Some specs:
Processor 2.5 GHz Intel Core i7
Memory 16 GB 1600 MHz DDR3
Graphics Intel Iris Pro
NVIDIA GeForce GT 750M GPU PCie
Intel Iris Pro GPU Built-in
8 GB DDR# 1600 MHz (x2) = 16 GB RAM
350 GB of 499 GB left on drive
Of the 16 GB of RAM I have 11 available for Premiere Pro and the other 5 GB allocated for other apps.
Any suggestions would be greatly appreciated.

>NVIDIA GeForce GT 750M GPU PCie
>Intel Iris Pro GPU Built-in
Dual graphics adapters are a bane on civilization!!!
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-link to why http://forums.adobe.com/message/4685328
-http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2
-Mac Utility for dual adapters http://forums.adobe.com/thread/1017891?tstart=0

Adobe Premiere Pro CC 2014 Crashing very often! Please Help!

Hello,
I am currently editing my first feature on Adobe Premiere Pro CC 2014 and it is currently up to date.
I am editing on a iMac 27in, late 2013 brand new computer.
Processor: 3.5 GHz Intel Core i7
Memory 32GB 1600 MHz DDR3
Graphics: NVIDIA GeForce GTX 780M 4096MB
System: OSX Yosemite V 10.10.1
The project is located on a 8TB G Drive
7200 RPM
High Performance ThunderBolt drive.
Details of the project:
I am currently working on a fine cut of 5K Red Footage that is being cut in the RAW.
I work at 1/2 quality settings and have no lag.
The timeline includes limited stacked video files and various mp3 audio files.
The Problem:
Lately, the program will randomly quit or freeze up 4-5 times during an 5-6 hour edit session.
Many times it is random, however, it seems to happen often if I accidentally click on the end of a clip on the timeline and it goes to switch into trimming mode.
Also, it will randomly go into the "pinwheel of death" out of nowhere followed by "Adobe CC is not responding."
My project file is just about 15MB now.
What is causing this reoccurring problem?
How can I make it happen less? I have scoured the forums and found similar articles but no helpful solutions.
I have recently turned auto save on to save every 2 minutes because there have been more than one occasion where I lost A LOT of work because of this issue.
I am about two weeks out from picture lock delivery and this issue is driving me crazy and loosing me a ton of time.
Please help or let me know if any more additional information can help solve the issue.
I have sent in well over 25 error reports already.
Thanks,
Thomas.

I think I may have found the solution...
I completely removed the Premiere Pro folder under User > Documents > Adobe and so far it seems to have solved the problem.
I of course backed up my projects and than deleted this folder. So far it seems it worked.
I'll know for sure in a day or two, but after constantly crashing, Premiere hasn't crashed for the last 4-5 hours of work.
Goran

Error installing Adobe Premiere Pro 2.0 on winows 7

Installing Adobe Premiere Pro 2.0 on my new Winows 7 computer and get an error 1311.source file not found. The last file shown on the addy is Data1.cab. Does anybody have an idea why that program will not install? Thanks........

Adobe sent me the download link after I told them I have a Windows 7 system and the 2.0 was suppose to be an upgrade from the 1.5, thanks a ton and I'll call Adobe again....

PREMIERE PRO CS4 CRASHES every time I try to export to media....

Import a file in whatever format (MPEG 2, MPEG 4, AVI, etc.), I add effects (or leave the file untouched) and then try to export it to MEDIA...Then Premiere Pro CS4 crashes giving me this error:
Premiere Pro has encountered an error.
[..\..\Scr\Component\ComponentFactory.cpp-119]
After pressing "continue" it brings another message:
Sorry, a serious error has ocurred that requires Adobe Premiere Pro to shut down. We wil attempt to save your current project.
I press OK and the Crash Report dialog box appears....
I installed Premiere Suite 3 weeks ago and I have never used this software before....Premiere has never allowed me to export any file...
My Lap Top has Windows 7 Ultimate - 64 with NVidia GT 130 1 GB video card, 8 GB of RAM, 1 TB of HD and 1920 x 1080 P display...
Any advice? or somebody who has had the same problem?
Thanking you for your time and courtesies in assisting me, please receive my best regards.
AZUARO

Have you just installed the software or applied
updates also?
Updates are needed for premiere as well as Media and other.......
Ciao
Giorgio

Adobe Media Encoder pausing rendering while working in Premiere Pro

Hello everyone,
So I am redering a video in Adobe Media Encoder and at the same time I am editing a new one in Premiere Pro.
I noticed that AME is constantly pausing the rendering and did not know why. It turns out that while I'm editing a video in Premiere Pro, I am constantly pressing the space bar to start/pause the video I'm editing. While I do that, AME keeps pausing/unpausing the rendering. Somehow, pressing the space bar in PP has an effect in AME.
I have no clue why it does that because the Premiere Pro window has the focus, not the AME one.
Has anyone ever seen that?
I use Windows 8 and Adobe CC.

Hi Rallymax,
Yes I do queue footage by having an Autowatch set up on the directories where the video is written to. I rarely do a direct export unless testing new settings.
Don't take this as gospel but I too had a feeling that GPU acceleration didn't happen with AME, only direct export. Not sure where that came from, I did watch some of the recent Adobe TV Web Seminar's about new features of CC products etc, so maybe on one of those?
I found this while trying to find out where I had seen it but it is from AMD site not Adobe so whether it's fully 100% correct I dunno:
Adobe Media Encoder
The Adobe Media Encoder (AME), with support for OpenCL™ and GPU acceleration, automates the production of multiple encoded versions of source files, sequences, and compositions in Premiere Pro CC. With the GPU-accelerated AME and AMD graphics technology, editors can quickly encode projects and output files for virtually any destination. AMD GPUs handle the heavy lifting, freeing the system’s CPU to perform other functions.
I will try the same test as Jason, if I can find any AVHCD video and see what the results are. Will be interesting.

Audio in Premiere Pro CS3 appears on one PC, not the other

Hi everyone,
I'm the Network Administrator for a high school and we have a digital media lab here using Adobe Creative Suite 3: Master Collection. All systems here are running Windows XP Professional and are on a Windows domain. All users are standard users, with no administrative rights for obvious security reasons. When I originally did the deployment of the lab by running sysprep on a reference computer and using ghost to deploy the rest of the computers, I noticed a problem with Premiere Pro CS3 after the deployment. In that lab, none of the computers would capture video via firewire and the built in capture function in Adobe Premiere CS3. I believe I have a post about this on these forums that was never resolved. To get around this, I'd capture the footage for students in my office and then transfer it over to their network drives so they could import it into Premiere Pro CS3 and edit the footage.
Recently, the school purchased some HD cameras that record to a built in hard drive or an SDHC card. The idea here was that the .MTS files could be copied from the camera to the computer running Premiere Pro CS3, the media files in .MTS format [at 1280x720] could be converted using KoyoteSoft's Free HD Converter using the settings MPEG2 [a preset], MPG2 as the format, 1280x720 // 16/9, 29.97 FPS, 9000 video bitrate, and 224 audio bitrate, and then the new media files could be imported into Premiere Pro CS3 and edited using the HDV 720p30 preset within Premiere Pro CS3.
This works great...on my office computer.
The problem is that if any student tries to import their footage on a computer in the digital media lab, the converted media files, the exact same ones that just imported into my Premiere Pro CS3 installation on a computer in my office with identical hardware as the computers in the digital media lab, fail to import the audio. I can see the video with no problems in the lab, but no audio layer appears. If I right click the video file and choose Open With> VLC or another media player, the media plays fine with audio. All audio/video codecs that are installed on my machine are also installed on the digital media machines. If I right click Adobe Premiere Pro CS3 from within a student account on those computers and choose Run As and use the local administrator account, Premiere Pro CS3 does the exact same thing, it still can't see the audio. Adobe CS3 is fully up to date on both my office computer and all digital media computers.
Any help fixing this would be greatly appreciated, spring break is coming up here this coming week and I'll be here all week. Hoping to get this resolved during that time so students can edit their own movies. Again, video imports, audio doesn't. No audio layer appears.
Thanks!

See if this helps... To work with AC3 sound files in Premiere CS3, copy the ad2ac3dec.dll file from the Encore CS3 directory into the Premiere directory

Unable to batch capture with Premiere Pro CC via Kona LHi

AJA's web site claims Premiere Pro CC is compatible with the Kona LHi card, but I can't get the two to work together properly. After repeated tries, I uninstalled and reinstalled everything AJA, but still no luck.
I need to batch capture DV clips from some mini-DV tapes on my Sony MVR035U tape deck. But I also need to upconvert them from 480i to 720p60 using my Kona Lhi card. I should be able to do this with Premiere Pro CC. But the PPCC Capture window won't give me any audio feedback when I select "AJA Movie Capture" in the Capture Settings pull down menu. I only get audio feedback when I enable "DV capture" but then I'm no longer able to upconvert.
Looking forward to any feedback on this issue. Been tying all day to trouble shoot this problem.
[Text formatting removed. Please type your posts here, rather than pasting.]
Message was edited by: Jim Simon

And now with CC June 2014 you can't even capture from HDV, I need to go back to Premiere CC 2013 for that....Adobe might think tape capture is over... but it isn't totally yet...

Unable to play Cineform avi files in Premiere Pro CS3

I am using Cineform NeoHD version 5.3.2 to convert the MXF files from my Canon XF300 into Cineform AVI.
Then I import these AVI files into Premiere Pro CS3 and here is where the problem begins.
Premiere is unable to play these Cineform files. All I get is about a second of audio, and a still frame of the video. This happens both in the source window, and also on the timeline.
The Cineform AVI files play perfectly fine when using Virtualdub for playback, but Windows media player behave just like Premiere.
Everything worked fine a week ago. Premiere appeared to use something called "ffdshow" to play the Cineform files, and I could edit without any trouble.
A few days ago, when I tried the same, that's when the problems came. Whenever I hit Play button in Premiere, a popup window came up, saying Premiere wanted to use ffdshow, and the options was "never", "no once", "yes once", "yes always".
When everything worked a week ago, I had to use the "yes always" option.
Now, it does not matter which option I use, Premiere will not play the Cineform files.
I did not make any changes to my computer between the day everything was okay, and when the problem appeared.
A Cineform representative suggested "ffdshow" is the troublemaker, so I uninstalled ffdshow and removed any traces of it I could find, but the same problem still exist.
Then I uninstalled Cineform NeoHD
Uninstalled and reinstalled Production Premium CS3 suite
Reinstalled Cineform NeoHD
Still same problem, nothing has changed.
It does not matter if I use 50i or 25p source files.
My system: (Laptop)
Windows Vista ultimate 64-bit
Intel 2,66GHz quad core CPU
4GB ram
Nvidia Geforce 8800M GTX
3x internal 7200rpm harddrives set up with raid-0
Anyone else experiencing this?
Any ideas what might be wrong?

dont know , but this stuff might fix your prob.. overwrite whatever ffdshow screwed up...
cfrepair utility:
http://www.siliconimaging.com/DigitalCinema/SiliconImaging_support.html
cineform codec (neo player)
http://estore.cineform.com/NeoPlayer.aspx
never used the cfrepair thing..but did install neoplayer which gave me the codec to use cs3 with cf raw files ( sample of cf raw at the si 2k site -- avi ext )
ps.... to keep overhead down on my computer I took the resulting cineform "player" out of my startup directory....as it wants to run in background when you install it...no need for that for my purpose of just getting the codec

Premiere Pro is not interpreting transparency correctly with the Adobe Creative Cloud 1.8.0.447 update

Yesterday, I updated to Adobe Creative Cloud 1.8.0.447. I found that after the update, both Premiere Pro CC (2014) and Premiere Pro CC are not ready transparency layers and alpha layers correctly. I have some lower third logos that I use on multiple projects and they are showing up more opaque than they should. Additionally, I have an export preset that uses a watermark. This watermark is showing up more opaque than it should too. I have checked both graphics in After Effects with the new Creative Cloud update and all graphics look fine. It seems to be an issue that is isolated in Premiere. The issue only happens when there is a video layer underneath the graphics. When the graphics are viewed with no video layer underneath, the transparency looks as it should. I have attached a few images showing the problems. They show graphics with and without video layers beneath.

I was able to resolve the issue by going into File>Project Settings>General and changing the Render from GPU Acceleration (OpenCL) to Software Only. It appears there is an issue with the AMD FirePro D500 graphics card. I was told by a call tech at Adobe that there are issues with the D300, D500, and D700 Graphics cards. However, I have an Intel Iris graphics card on my MacBook Pro and was having the same transparency issue. So, I'm skeptical that the issue is just with the graphics card. The transparency issue did not start on BOTH computers until the latest CC upgrade. For now, the Software Only renderer option fixes the issue. I hope to see a fix in the next CC update. FYI: The Renderer needs to be changed to Software Only in both Premiere Pro Project Settings and Media Encoder Preferences.

Premiere Pro CC Speichert Fehlerhaft!!

Similar Messages

Maybe you are looking for