Premiere Pro CC won't load and I can't uninstall it.

Hi, I was using Premiere Pro yesterday and it worked fine. I haven't done any updates or anything. Today I tried to use the software and it doesn't even load the logo. As soon as I open Premiere, Adobe's App Manager pops up on the dock and then goes away. Premier Pro stops loading soon after that.
I'm trying to uninstall the program and it's not even responding. I don't know what else to do......
I'm using a 2011 IMac with OSX Version 10.9.4.

Maybe this will help, see post 6.
Premiere CC 2014 won't open at all! Help

Similar Messages

Problems with current version of AIR. Won't load and also can't uninstall

I have recently purchased a new Mac and loaded the most recent version of AIR but now when I try to run it I keep getting the following message
This application requires a version of Adobe AIR which cannot be found.
Please download the latest version of the runtime from
http://www.adobe.com/go/getair,
or contact the application author for an updated version.
I am also getting this message when I try and run the uninstaller so I can I can try and re-install.
Does anyone have any suggestions?
Thanks.

I had AIR 3 on my MacBook Pro before I updated it to Lion. I use AIR 3 to run McMillan Study guides Master your CDCs. when I updated my mac to lion and tried to run the application the application couldn't find AIR 3 on my mac. So I uninstalled it and tried to install it again. when I tried to install it the installer program doesn't open. please help me this program is crucial for my upgrade training.
From: lisachao <[email protected]>
To: A1C PD <[email protected]>
Sent: Monday, October 24, 2011 12:35 PM
Subject: Problems with current version of AIR. Won't load and also can't uninstall
Re: Problems with current version of AIR. Won't load and also can't uninstall created by lisachao in Installation Issues - View the full discussion
Is this the error you are getting when you are installing AIR 3.0? Or is this the error you are getting after you've already installed AIR 3.0 and attempting to run AIR applications? If it's the latter, which applications are you trying to run? Can you please send us your logs so that we can investigate further? Thanks!
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3987820#3987820
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3987820#3987820. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Installation Issues by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Premiere Pro trial won't download and it isn't listed in my creative cloud

Premiere Pro trial won't download and it isn't listed in my creative cloud. It is frustrating... it says it is downloading but it makes creative cloud pop up and I then can't find it listed . I just want the trial. I have done trouble shooting on cchromeand on my computer.

See if your machine meets the system requirements for the software. CC will not list applications that will not work with the system.
Premiere Pro - http://helpx.adobe.com/premiere-pro/system-requirements.html

Since upgrading to Yosemite on my iMac, My Mail app refuses to open, Safari won't load, and I can't upload pictures from my iPad... Please help, any ideas very welcome. I've had my iMac since 2011, and have never had any issues to deal with before..

Since upgrading to Yosemite on my iMac: My Mail app refuses to open, Safari won't load, and I can't upload pictures from my iPad...
Please help, any ideas very welcome. I've had my iMac since 2011, and have never had any issues to deal with before..
Thanks

29/11/2014 20:17:01.315 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 11 seconds. Pushing respawn out by 49 seconds.
29/11/2014 20:17:37.013 com.apple.backupd[616]: Finished scan
29/11/2014 20:17:43.108 com.apple.backupd[616]: Saved event cache at
/Volumes/Time Machine Backups/Backups.backupdb/Geoff Lambrechts’s iMac
(2)/2014-11-29-200648.inProgress/9B453663-603F-40B8-AC21-24F05C724E15/.6162AD34- 38F8-30AB-98E0-4A22FB9D311F.eventdb
29/11/2014 20:17:43.207 com.apple.backupd[616]: Not using file event
preflight for Macintosh HD
29/11/2014 20:18:01.561 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 11 seconds. Pushing respawn out by 49 seconds.
29/11/2014 20:18:16.288 com.apple.xpc.launchd[1]:
(com.apple.quicklook[715]) Endpoint has been activated through legacy
launch(3) APIs. Please switch to XPC or bootstrap_check_in():
com.apple.quicklook
29/11/2014 20:18:23.705 com.apple.SecurityServer[56]: Session 100013 created
29/11/2014 20:18:32.046 mdworker[718]: code validation failed in the
process of getting signing information: Error Domain=NSOSStatusErrorDomain
Code=-67062 "The operation couldn’t be completed. (OSStatus error -67062.)"
29/11/2014 20:19:01.662 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 11 seconds. Pushing respawn out by 49 seconds.
29/11/2014 20:19:45.458 com.apple.xpc.launchd[1]:
(com.apple.imfoundation.IMRemoteURLConnectionAgent) The
_DirtyJetsamMemoryLimit key is not available on this platform.
29/11/2014 20:19:59.123 com.apple.xpc.launchd[1]:
(com.apple.PubSub.Agent[725]) Endpoint has been activated through legacy
launch(3) APIs. Please switch to XPC or bootstrap_check_in():
com.apple.pubsub.ipc
29/11/2014 20:19:59.123 com.apple.xpc.launchd[1]:
(com.apple.PubSub.Agent[725]) Endpoint has been activated through legacy
launch(3) APIs. Please switch to XPC or bootstrap_check_in():
com.apple.pubsub.notification
29/11/2014 20:20:01.138 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:21:01.484 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:21:13.430 com.apple.backupd[616]: Found 4529 files (1.1 GB)
needing backup
29/11/2014 20:21:18.786 com.apple.backupd[616]: 2.82 GB required (including
padding), 1.24 TB available
29/11/2014 20:21:31.775 Console[734]: Failed to connect (_consoleX) outlet
from (NSApplication) to (ConsoleX): missing setter or instance variable
29/11/2014 20:21:34.230 WindowServer[162]: disable_update_timeout: UI
updates were forcibly disabled by application "Console" for over 1.00
seconds. Server has re-enabled them.
29/11/2014 20:21:36.898 WindowServer[162]: common_reenable_update: UI
updates were finally reenabled by application "Console" after 3.67 seconds
(server forcibly re-enabled them after 1.00 seconds)
29/11/2014 20:21:36.971 coreservicesd[83]: SFLEntryBase::ListHasChanged
mach_msg returned 10000004d
29/11/2014 20:22:01.817 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:23:02.170 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:24:02.547 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:25:02.168 CalendarAgent[218]:
[Refusing to parse response
to PROPPATCH because of content-type: .]
29/11/2014 20:25:02.233 CalendarAgent[218]:
[Refusing to parse response
to PROPPATCH because of content-type: .]
29/11/2014 20:25:02.236 CalendarAgent[218]:
[Refusing to parse response
to PROPPATCH because of content-type: .]
29/11/2014 20:25:02.284 CalendarAgent[218]:
[Refusing to parse response
to PROPPATCH because of content-type: .]
29/11/2014 20:25:03.059 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:25:12.674 com.apple.xpc.launchd[1]:
(com.apple.imfoundation.IMRemoteURLConnectionAgent) The
_DirtyJetsamMemoryLimit key is not available on this platform.
29/11/2014 20:26:03.464 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:27:03.841 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
On 29 November 2014 at 19:29, Apple Support Communities Updates <

Safari won't load and I can't update my software, ie., I get an error message. What can I do to fix this?

Safari won't load and I can't update my software, ie., I get an error message. What can I do to fix this?

You can't install Safari 3 on your 10.3.9 OS.
You must use the DVD installer to re-install the older version of Safari found on it.
You can update your operating system buy purchasing Tiger (10.4) and get a more modern version of Safari.

ITunes, app store, iBooks store, etc won't load and I can't figure out why. I tried rebooting and it didn't help. Everything else works fine. Help please?

iTunes, app store , iBooks store, etc won't load and I don't know why. Everything else works fine, and I've rebooted it. The problem is still there and I know I have a good Internet connection. Help please?

Have you tried disconnecting and re-connecting to your network ?. And when you say rebooted do you mean a reset ? If not then try that : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
You could also try closing those apps completely. From the home screen (i.e. not with any of those apps 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the iTunes, App Store and iBooks apps to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.

Premiere Pro CC won't load my project

However I am able to load the project on another computer running Premiere Pro CC. At my home computer the program launches, and I select the project I want, but the assets and sequences don't load into the Premiere windows. However if I open another project (that I have only worked on using my home computer) I have no problems loading the project.

Hi, I am having this exact issue. In my case, both versions of PPro are exactly the same, base version installed from Creative Cloud client with no plugins used.
Project opens with no issues on one pc and wont open on the pc it was originally created on. It does not crash or say 'not responding' but assets and sequences wont load
as Kristine describes. I have tried creating a new project and importing the old one; the assets appear but the program seems to freeze up as I cant interact with anything and
hear the windows ping noise with every click. The project is very simple; a low bitrate .mp4 video with .mp3 and .wav sound effects added.

Premiere pro cs6 won't load AVCHD video files

why won't premiere pro cs6 load video files?
Premiere pro application loads but won't load HD video files.

What codec packs do you have loaded? With a straight installation I have had any problems loading my Sony AVCHD 1920 x 1080 files in any version of Premiere. What is your source of your media?

Premiere Pro CS6 won't load audio volume.

When I open my project I get this:
Then, none of the volume adjustments work on the timeline.
Everything you need to know:
Mac OSX Snow Leopard
Premiere Pro CS6 (Production Premium)
Project imported from FCP7 XML, although I have removed all effects etc from that import. All filters and adjustements have been made in premiere.
I've copied all the clips into a new timeline, restarted premiere, rebooted, don't know what else to do.
Please help?

For the record I'm having this same problem. Scary, since I made a bunch of audio edits and lost that work.
Definitely smells like a bug. I'm using Xto7 to convert a sequence from FCP X to an XML file CS6 can read; I'm having to run both FCP X and Premiere simultaneously, since Xto7 didn't really do a good job. The problem occured when I switched back and forth between the two, and tried to relink an offline file in my Premiere project (where I am reassembling the sequence). Suddenly the sound would not play. I quit and restarted, and got the error above. Ugh.

I downloaded movies that won't load and I can't re download help

I downloaded 3 movies for a flight. Downloaded them the night before. Paid for wifi logged on to iTunes. The movies moved from downloads to video folder. Videos won't load to play and I can't re download. Any suggestions?

If you want help with downloading the application you'll need to provide information regarding what application and what problems you ran into trying to download it.
If you want to return your purchase and it was purchased thru Adobe... Please see
Return, cancel, or exchange an Adobe order -
http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html

Premiere Pro CC won't render and Encoder freezes at 50%

I'm trying to render a multicam project. Up until 2 days ago, I could render projects out fine. Now, if attempting to render with Premiere, the project stays at 0% indefinitely. If I queue the project in Encoder, it gets to 50%, then just stops any progress in the render but continues to count the time elapsed. I recently added a Samsung printer to my computer, so I uninstalled all of those pieces of software but still the same results. The project was created on the previous version of Premiere before the latest update to CC. It created a new save file and the project opens up fine, with all other functions still available.
I'm running on a Intel Zeon 3.47GHz processor, 14GB ram, gpu acceleration card, 2 gig video card.
Any ideas would be appreciated. Thanks in advance.

The benefit's of two pass are dubious, at best. I recommend bypassing that second pass and just go with one pass encoding. It's faster and chances are no one would be able to tell any difference. (Plus, it'll probably work.)

Can't load all email accounts - HTTP server won't load and I can get a conn

Unable to get a connection and to load the last of three accounts an HTTP its msn.com

What model iPad do you have ? The iPad 2 onwards (inlcuding the Mini) have a built-in gyroscope, if you have a first gen iPad then it won't have gyroscope.

Spotify won't open and I can't uninstall or reinstall

When I try to open Spotify nothing happens. Not even an error message or something.
The same when I try to uninstall it. Just nothing happens..
When I try to reinstall it, it says 'installing spotify'. And again boom, nothing happens afterwards.
Can someone help me?!

Hey! Welcome to the community :)
Do you have Internet Connection Sharing enabled on any of your network cards?
Spotify doesn't seem to like that setting for some reason!
If you are having issues, can you try an uninstall and reinstall whilst in Windows safe mode with networking and see if it then works?
Instructions to boot into safe mode with networking are here:
http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode
Peter

Frame 10 won't open, and I can't uninstall

Suddenly, FrameMaker 10 will not open. When I try to open it, it generates a log file which says there's a stack trace error. I decided to uninstall and then reinstall.
When I start the uninstaller, a message says that I must close javaw.exe to continue. But when I look in Task Manager, javaw.exe is not listed on any tab. I've tried searching the internet, but couldn't find anything about a "phantom" javaw.exe.
What can I do to get the uninstaller to work? Please help! I can't use Frame at all right now, and I've got so much work to do.

Good suggestion. That's something that worked when I had a similar issue with RoboHelp 9, but unfortunately not this time. :-)
But I resolved the problem. I had forgottonen to click the "Show processes from all users" button at the bottom of the Task Manager. When I did that, I could find javaw.exe and shut it down, and was able to reinstall.

After download and installation, InDesign, Flash, Dreamweaver and Premiere Pro all won't fully launch.

After download and installation, InDesign, Flash, Dreamweaver and Premiere Pro all won't fully launch. From the Windows icon pane, I click on the program, it opens the Sign In Required pane, I sign in, it opens the Thank You pane and reverts back to Sign In pane or never opens the program.
Acrobat also keeps giving me a popup to sign in, each time I look at a .pdf file.
I have tried uninstalling Acrobat and then redownloading. It didn't work.
Anyone else find a fix?

Sign Out When Sign In http://forums.adobe.com/thread/1450581?tstart=0 may help
-and http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html

Premiere Pro CC won't load and I can't uninstall it.

Similar Messages

Maybe you are looking for