Premiere Pro CC Won't playback with an audio interface (Scarlett 2i2)

Pretty much when i want to playback my videos they won't, when i change the audio hardware to my computer speakers it works but with my external audio interface it won't playback.

Hi,
Premier Pro CC v7.0
Macbook Pro Retina
Mid 2012
Processor 2.3 GHz Intel Core i7
Memory 8 GB 1600 MHz DDR3
Graphics NVIDIA GeForce GT 650M 1024 MB
Software OS X 10.9.4

Similar Messages

Can Premiere Pro CC handle AVI files with multiple audio streams?

I have an AVI file with two audio streams and I am wondering if there's any way to access the second stream in PP? So far I can only get the first stream to play. I know I can extract the second stream in for instance VirtualDub, but it would be nice to not have to do that in the interest of an effective workflow.

Hello again Jim! Thank you for your reply, you seem to be working hard here on the forums! The info I have found from 2011 suggested that it wasn't possible then, but I was hoping maybe they added this feature.

Can't hear playback with USB audio interface plugged in

I start Logic Pro 8 and then plug in Lexicon Lambda for a USB interface between guitar and macbook pro. With the Lambda plugged in I hear nothing from mac or headphone input on Lambda. If I unplug Lambda I can hear playback from mac just fine thru speakers or headphones.
Very appreciative of any advice on how to solve this.
Thanks.

berkleyrob wrote:
I start Logic Pro 8 and then plug in Lexicon Lambda for a USB interface between guitar and macbook pro. With the Lambda plugged in I hear nothing from mac or headphone input on Lambda.
Unplug your audio interface, reboot the Mac, plug the USB interface in, let it be recognized. Open Audio/MIDI Setup (in utilities) see if the Lambda shows up as an input and output device.
Yes/No?
If yes, you don't have to select if for any of the Input/Outputs, Logic's audio interface selection operates independently from the system.
Open Logic go to "Preferences/Audio) select the Lexicon or Lambda interface as the default unit, set audio buffers to 256.
Anything yet.
All audio I/O will be coming from the lexicon the Mac's audio system is now out of the equation.
pancenter-

Constant clicking/popping with USB audio interface (scarlett 2i1)

Hi, I'm having a very frustrating issue with my audio. for the time being I have just decided not to use any audio (which is absurd). I have had this problem with Arch, Mint, Ubuntu, Fedora, etc...
My audio interface is a Focusrite Scarlett 2i2, and I cannot get it to stop making popping noises. Initially, it would only do it when I would open an application (regardless of whether that application relies on audio), move back and forward in my browser, etc. Anything that makes the computer work. Right now, it is popping every 1/2 second, probably because dd is cloning a hd right now. Possibly related, qjackctl has started saying it can't connect to JACK server, I'm pretty sure it worked when I first installed it (it tells me "ALSA: cannot open PCM device alsa_pcm for playback.
I have tried the following:
-ediitng asound.conf with various suggestions online for others that have had this issue - changing sample rates etc... unfortunately none of them are using the same interface so I don't think they apply to me. I don't really know what most of the things in these files mean, otherwise I would probably be able to configure it properly.
-blacklisting every other sound card in my computer
-adding a .asoundrc file as suggested here:
-tried to view information on my sound card with lsusb -v, but I don't know how to pinpoint the sound card so the list is too long for me to scroll all the way to the top (I typically have 12 to 14 usb devices plugged into this computer)
I mainly use OS X, but I would like to use Linux for music production as well; obviously this has made it impossible. Again, this has happened with every distro I have tried.
Please help, this has basically made Linux unusable for anything other than very basic internet browsing. I'm using gnome-shell and linux-rt kernel.
Last edited by jamiethemorris (2012-08-26 12:58:24)

I have precisely the same problem.
Did you find a solution or, at least, somenthing usefull?

Adobe Premiere Pro CC Won't Playback / Freezes

I was using it just 2 days ago and all was well, everything worked perfectly. I then tried to open the same project today and it will not play back. I started a NEW project today and imported media. While auditioning media when I hit space bar to start the footage it plays (sometimes) for less than a second then stops / freezes. What am I doing wrong? This is kind of URGENT as I have to deliver a project by end of day... I am guessing BACK to final cut is the best option? I was trying hard to make the swap to Premiere, it just does not seem to work on my machine consistantly.
iMac 27"
1 TB HD
3.4 GHz Intel Core i7
24 GB 1600 MHz DDR3 RAM
Is my computer not good enough to use Premiere?
Thanks!
Gene

When I directed you here from the Cloud forum http://forums.adobe.com/thread/1451211 I posted several links for you to provide more information for people in this forum to be able to help... I will repeat below, so you may provide more information
Please provide more information, including details of what you are editing
-PPro Information FAQ http://forums.adobe.com/message/4200840
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download
Also, What is your exact brand/model graphics adapter (ATI or nVidia or ???)
What is your exact graphics adapter driver version?
Have you gone to the vendor web site to check for a newer driver?

Focusrite USB 2.0 Audio Driver Scarlett 2i2 in Premiere CC2014 not working

Hi everybody.
I just recently upgraded to CC and cannot use my Audio Interface with it.
Info:
i7
Windows 7 Ultimate
Focusrite Scarlett 2i2, drivers up to date
Premiere Pro CC 2014 up do date
GeForce GTX Titan
In CS6 i have set the audio hardware to Focusrite USB 2.0 Audio Driver.
ASIO Settings:
Buffer length 10
In Latency is 19,6
Out latency is 28,9
Sample Rate 48000
...and it works like a charm.
In CC 2014 however, i can only use Premiere WDM sound.
If i choose the Focusrite, my sequence won't play. I can still scrub but with no audio.
Also recording does not work.
I often have to punch in layout-voiceovers for timing and need this to work, so any help would be greatly appreciated!
thank you all!

JSS1138 schrieb:
Premiere Pro is not the best with USB audio. Sometime it works, often it doesn't. My recommendation is to skip any type of USB audio and only use real audio connections.
Thank you for your input.
I am using this setup in CS6 and it works great but could not get it to work with CC. So i can't just settle with "skip any type of USB audio".
Anyway, i figured it out:
I chose Premiere Pro WDM sound instead of the scarlett and in the ASIO settings chose the Scralett as input. works just how it's supposed to now.

Premiere Pro trial won't download and it isn't listed in my creative cloud

Premiere Pro trial won't download and it isn't listed in my creative cloud. It is frustrating... it says it is downloading but it makes creative cloud pop up and I then can't find it listed . I just want the trial. I have done trouble shooting on cchromeand on my computer.

See if your machine meets the system requirements for the software. CC will not list applications that will not work with the system.
Premiere Pro - http://helpx.adobe.com/premiere-pro/system-requirements.html

Premiere Pro CS5.5 mercury playback engine will be supported on GTX 680

Could someone please confirm if Premiere Pro CS5.5 mercury playback engine will be supported on GTX 680.
thanks

Jim,
Your comment was based upon results from the 560 Ti 448 card and that is € 240 or more. The 680 is € 440. That is 45% difference: € 440 - (0.45x440) = € 440 - € 198 = € 242
Your comparison is based on a € 200 GTX 560 model, which only achieves a score of around 120 seconds, which is 55% less expensive (€ 440 - (0.55x440) = € 440 - € 242 = € 198) and more than 225% slower (120 / 53 = 2.26)
So for 55% less expenditure, you lose more than 225% performance. That is very disappointing and would rank in the 'penny-wise-pound-foolish' savings. (But that is how your system can be ranked, at least in the past). There is another major flaw in your reasoning, you are only considering number of CUDA cores, nothing else. You are disregarding all the other aspects of the new architecture and that makes your argument very weak and flawed. You have to consider the number of cores AND the memory bus in combination. Something you obviously overlooked, but although the number of cores tripled in comparison to the 580, the memory bus was reduced to 256 bits width, a 50% reduction. That means that at best the expected performance gain could be 0.5 (memory bus) x 3 (number of cores) = 1.5 and not your 300%.
To summarize:
Now if you want to go the other way, with the 680 as the baseline, you'd say that for 60% less money, you still get 80% of the performance.
For 55% less money, you get 44% of the performance on this test.

CC Premiere Pro crashes on start up with "Not Responding"

CC Premiere Pro crashes on start up with "Not Responding".
Tried:
1. Reboot
2. Updating Graphics Drivers.
3. Removing Red Giant Plug-Ins from my current Adobe Common Folder.
4. Running in compatibility mode for Windows 7
5. Running as Admin
All Failed.
Got a film deadline in 24 hours, really need this fixed like 5 hours ago. Any help would be amazing.

Type Crash on Launch into the forum search. You'll get all the known fixes.

Premiere Pro/Prelude CS6 not working with AVCHD from Canon HF G10

I just tried switching from Final Cut Pro 7/X to Adobe Premiere Pro CS6 and have not been able to get Premiere Pro or Prelude to work with AVCHD footage from my Canon HF G10. The system runs Mac OS X 10.7.4 on a 3.4 GHz quad-core iMac with 16GB of RAM and 10Gbit/s Thunderbolt RAID for video storage. Adobe Updater ran yesterday and installed CSXS infrastructure updates which did not fix the problems.
After importing several short (less than 5 minutes each) 1080p30 clips into Premiere Pro, I can scrub over the first few seconds of a clip but afterwards it stalls or mixes in frames from the beginning of the clip. Rendering 30 seconds of video does not complete in reasonable time, i.e. takes more than 5 minutes. I figured I would try ingest the footage with Prelude and am running into the same problems. Scrubbing does not work, only the first few seconds from a clip are available. When configuring Prelude to transcode on ingest, I am getting "Import XMP failed" errors. I already spent several hours trying to figure this out. In the meantime, I finished the project using Final Cut Pro X :-\
Any help would be appreciated.
Thank you,
Niels.

Any chance this gets fixed soon? I'm shooting with an AF-100, and at this point I'm still using Final Cut to transcode my footage so I can have audio. I've also noticed the video jumps around even when it does have audio. Prelude has been extremely problematic for me, and it doesn't have a way to bring in clips that returned errors upon importing, I have to write down the clip numbers and bring them in individually. I've also tried just dropping the file structure from the card straight to the hard drive. It's a huge problem, and is keeping me from making the switch fully from FCP 7.

After download and installation, InDesign, Flash, Dreamweaver and Premiere Pro all won't fully launch.

After download and installation, InDesign, Flash, Dreamweaver and Premiere Pro all won't fully launch. From the Windows icon pane, I click on the program, it opens the Sign In Required pane, I sign in, it opens the Thank You pane and reverts back to Sign In pane or never opens the program.
Acrobat also keeps giving me a popup to sign in, each time I look at a .pdf file.
I have tried uninstalling Acrobat and then redownloading. It didn't work.
Anyone else find a fix?

Sign Out When Sign In http://forums.adobe.com/thread/1450581?tstart=0 may help
-and http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html

Premiere pro cc 8.2.0 (65) build "audio dropout Detected at {timecode} in "Adobe Player"

premiere pro cc 8.2.0 (65) build "audio dropout Detected at {timecode} in "Adobe Player"
This is new to since upgrading from CS6 to CC.
The audio pitch plays slightly at a slower pitch during timeline playback and the play head jumps back a few frames constantly at the same time while the video on the playback window skips backwards during playback constantly making it very painful to work with. I've tried to find a solution on the forum and google without any luck event found that problem to be common for many Premiere pro user. I only have one layer of video on my timeline at the moment and this is constant with all my projects since I've upgraded to Premiere Pro CC last November and no solution as come forth yet. Should I stay or should I GO? subscription is due for renewal soon? I've sent a request for help last week and still no reply?
Some help would be very much appreciated
OS X Yosemite Version 10.10.1
MacBook Pro (17-inch, Late 2011)
2.4 GHz Intel Core i7
16 GB 1600 MHz DDR3
AMD Radeon HD 6770M 1024 MB
Email: [email protected]

I too have problems with audio on CS6.05, I wanted to route my audio thru my digi003 interface, but no avail., tried it on my Presonus light pipe, nada. I have a matrox mojito max and tried to download using it;s vetura capture software, still dropouts. I then went to cineform.com and downloaded the free Cineform Decoder Codec under the downloads file and used it, No more dropouts as of date when using this codec. Its listed as Gopro Cineform 4k/3D/HD codec.
http://cineform.com/gopro-cineform-decoder

When i try to upload a .mts file from my Sony camera to Premiere Pro CC it refuses to play the audio! Ofcourse i could convert every single clip but it takes tons of time. How can i make Pr play audio track properly?

When i try to upload a .mts file from my Sony camera to Premiere Pro CC it refuses to play the audio! Ofcourse i could convert every single clip but it takes tons of time. How can i make Pr play audio track properly?

Does it not play at all or cannot you get the audio in the timeline?
Did you copy the entire card to the hdd and then imported the file via the Media Browser?
Did you source patch the audio tracks?

ITunes won't play songs w/Audio Interface connected

I am using iTunes with a Tascam US-122L audio interface. It worked perfectly fine until yesterday evening, and now iTunes absolutely refuses to play any music when the Tascam is connected. I click a song title and the diamond slider does not move, the song stays at 0:00, and the "play" button doesn't change to the "pause" button. It seemed to have started doing this after I exported a song into iTunes from an app called Audio Hijack, which I downloaded to capture some audio from Logic Pro.
iTunes works perfectly fine when the audio interface isn't connected.
I've tried everything, from restarting my computer, to reinstalling the Tascam drivers to reinstalling iTunes, but to no avail. Anyone got any ideas?

Does anyone have a possible solution to this? I'm getting the exact same issue with the US-122L after upgrading its firmware (believe it or not... it worked with the previous firmware.. silly me, if it ain't broke, don't fix it).
Really considering returning the thing now, even though I really like it. I'd appreciate any leads, even a way to get debugging info out of it - I'm a programmer and I can tinker if needed. Thanks in advance.

Stage Performance with 2408 audio interface

Stage Performance with 2408 audio interface
a)I need to set a playlist with my 80 projects in front of me, ready to play and with a minimum loading time every time I select a new song to perform.
Each of my logic project has about 30 audio instrument tracks and 10 audio instrument tracks with many plug in.
I consider buying On Stage but the software only takes 20 projects at the time.
Is it possible to program more than one on stage software in the same computer and to program my 80 Logic projects?
I don't want to learn how to use Ablaton live, now I am finally comfortable with Logic.
b)About the loading time and the computer CPU:
1) what would be the best deal to avoid the loading time between the songs: I can bounce my 50 tracks to a 4 stereo audio tracks, create a new project with these 4 audio instrument track to make faster or
2) I can just leave the project with the original tracks but even with my Mac book Pro 2.4 GHZ, the computer crashes sometime because too many effects and tracks. (2 GB ram)
Please if you have an idea, I would appreciate a lot!!
Thank you in advance.
John

An external audio interface will not make a significant difference to the CPU strain. All it might do is improve the quality of your output signal. It will also not improve (or alter) the intrinsic audio quality of a bounce, unless there are external hardware synths/modules involved.
In the best case scenario (high end interfaces) the latency might drop a few milliseconds.
If you do not record audio, you can turn off software monitoring.
I also have the Lush, it's a lovely synth, but also a CPU-hog that can pretty easily overload the one CPU-core it is processed on.
What often helps with these synths is to turn off any FX (delay, chorus reverb, etc) that are built into the synth, and use Logics plugins as inserts on the channel strip. Also, turning off FX on synths reveals the actual ("virgin") honest sound of the synth itself.

Premiere Pro CC Won't playback with an audio interface (Scarlett 2i2)

Similar Messages

Maybe you are looking for