Premiere Pro CC won't render single frame cuts.

I'm cutting a corporate video with a glitchy treatment, so there are tons of shots that are only held for a single (or two) frames. When I want to render, the render sometimes only goes up to the single frame cut and then stops. No error messages. It doesn't crash (If I press cancel, it immediately puts me back into editing mode, with everything up to the single frame rendered). It just stops rendering.
What gives? Help! D:
Pieter

OK.
Let's see a bit of the sequence where the issue lies.

Similar Messages

Premiere Pro CS4 won't render my sequences

Everytime I send a sequence to Media Encoder, it just sits there. And sits and sits, etc. At the bottom it just says "Loading "Gleaner_Shoot.prproj".
I'm using a 2008 Mac with 8 cores with 16 gigs of ram.
My footage came from the Canon HV20. I have clips at both 24p and 1080i.
I'm setting up my sequences to match the clips I'm placing in them.
One thing of note is I'm really only using 3 looong clips. Since CS4 doesn't do scene detection well. I opted to instead make subclips from the long clips and use those. 2 of them are about 30 minutes long and one is nearly an hour. Could this be the problem?
Thing is, this happens even when I do a 1-minute sequence test.
It even happens when I try to use a test sequence which contains only audio.
I've tried outputting to quicktime and MPEG 2. I was careful to set the export settings to match the sources.
After a long wait, Media Encoder gives up and I get a warning icon in the status column. It says this:
" - Source File: /Users/johnstanowski/Library/Caches/TemporaryItems/FixThrive_1.prproj
- Output File: /Volumes/Data HD/WEBSITES/BREVITY/3d stuff/Fixthrive_1.mov
- Preset Used: Custom
- Video: 720x480, 30 [fps], Progressive, Quality 100
- Audio:
- Bitrate: None
- Encoding Time: 00:01:19
Wed Dec 3 10:46:04 2008 : Encoding Failed
The Operation was interrupted by user
- Source File: /Users/johnstanowski/Library/Caches/TemporaryItems/Thrive2.mov.prproj
- Output File: /Volumes/Data HD/WEBSITES/BREVITY/3d stuff/Thrive2.mov
- Preset Used: Custom
- Video: 720x480, 29.97 [fps], Progressive, Quality 100
- Audio:
- Bitrate: DV/DVCPRO - NTSC
- Encoding Time: 00:00:15
Wed Dec 3 10:50:39 2008 : Encoding Failed
The Operation was interrupted by user
- Source File: /Volumes/Data HD/WEBSITES/BREVITY/3d stuff/_Front Flash/FLASH/SOURCES/BREVITY RENDER READY.mov
- Output File: /Volumes/Data HD/WEBSITES/BREVITY/3d stuff/_Front Flash/FLASH/FLASH FILES/brevity_render_ready.flv
- Preset Used: Custom
- Video: 903x250, Same as source [fps]
- Audio: MPEG Layer III (MP3), 128 [kbps], Stereo
- Bitrate: VBR, 1000.00 [kbps]
- Encoding Time: 00:01:38
Tue Dec 16 16:44:27 2008 : Encoding Failed
The Operation was interrupted by user
- Source File: /Users/johnstanowski/Library/Caches/TemporaryItems/Gleaner_Shoot.prproj
- Output File: /Users/johnstanowski/Desktop/THURDAY.mov
- Preset Used: Custom
- Video:
- Audio:
- Bitrate:
- Encoding Time: 00:11:07
Tue Aug 4 13:19:39 2009 : Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.
I usually use After Effects so I'm not really up on Premiere that much, but I've used it a good bit in the past and never came across this problem.
Any ideas?

Thanks. I hope I've provided enough information below.
Premiere Pro CS4 (just recently upgraded from CS3 where this session was orignally created)
Dell Precision t5400
Intel Xeon E5400 2.33 Ghz
3.25G RAM
XP Pro
Virtual Memory is tweaked per the optimization article on Adobe site:
sytem RAM + 12MB
2 x system RAM
Hardware Acceleration - disabled in display properties
project is 6 min 30 sec
no fancy edits....standard audio/video transitions only:
cross dissolve
additive dissoolve
band wipe
darn door wipe
audio x fade
audio fade out
audio fade in
VT1:
AVI video clips
BMP stills
1 JPG still
VT2:
credits roll at the end over still shot bmp
AT1:
voice over in WAV
using sidekick 4.1 to trigger the compression on AT2
EQ
de-clicker
AT2:
music backing track in MP3
using sidekick 4.1 triggered compression (ducking) from AT1
Using the default PPR4 workspace layout
Very basic edits in a 6 min training video
Using Export>Media>AVI output (compressed) and stereo. My sytem hangs in Media Encoder. I let it sit for 20 minutes before I manually stopped.
Thanks,
Kyle

Premiere Pro CS5 won't Render. Freezes for 1-2 minutes when I try to edit the timeline.. Help!

Hi Guys
I'm new to this, but in desperate need of help. Thought i'd give it a shot and let you know what my problem is!
Basically i'm editing a dance concert which is approx 2 hours long. I'm running a late 2011 model iMac w/ i7 Quadcore and 16GB of RAM.
Using Sony XDCAM EX 1080p footage (2 cameras). Everything was going so well until I rendered (not export) the footage overnight. It only rendered less than half of the footage and won't allow me to render anymore. Doesn't even show the details of the amount of frames.. estimated time etc.
Heres a screen shot -
I checked my hard drive space and there's 150 GB left so there's more than enough for it render.
Another problem is that any editing i do to the timeline whether it's trimming, moving, copying etc. It just lags / freezes for about 1-2 minutes (has the loading Icon) then goes back to normal.
Before I did the rendering last night, everything was fine. I was able to edit very smoothly without any lag or freezing. First time i've encountered this. I did the same production last year using the same cameras, file format and software version and it was fine.
Any help would be greatly appreciated!
Kind regards,
Jeremy

Remove the gaps in your timeline or fill the gaps with black clips and try again.

Premiere Pro CC won't render and Encoder freezes at 50%

I'm trying to render a multicam project. Up until 2 days ago, I could render projects out fine. Now, if attempting to render with Premiere, the project stays at 0% indefinitely. If I queue the project in Encoder, it gets to 50%, then just stops any progress in the render but continues to count the time elapsed. I recently added a Samsung printer to my computer, so I uninstalled all of those pieces of software but still the same results. The project was created on the previous version of Premiere before the latest update to CC. It created a new save file and the project opens up fine, with all other functions still available.
I'm running on a Intel Zeon 3.47GHz processor, 14GB ram, gpu acceleration card, 2 gig video card.
Any ideas would be appreciated. Thanks in advance.

The benefit's of two pass are dubious, at best. I recommend bypassing that second pass and just go with one pass encoding. It's faster and chances are no one would be able to tell any difference. (Plus, it'll probably work.)

Premiere Pro CC refuses to render sequences

I have a project in Premiere Pro where I have a lot of footage that needs to be rendered for editing. Lots of red here! However, any time I try to render by hitting Enter or even selecting a few bits to render in pieces, the rendering window comes up and sits at 0.01% and won't render any frames at all. If I try to cancel it gives a "not responding" message and I have to force close the app. I have tried clearing the media cache and even uninstalled and reinstalled but it still won't render. This isn't a problem with this one project either, but some of them get about 70-75% done before they stop. By the way, these projects were started in CS6 (which I don't have any more) and converted by Premiere Pro into a CC project. I'm running on a Windows 7 Professional 64-bit machine with the Intel i5 2.67GHz and 8 MB of RAM.
Please help! I can't edit if I can't see it!

I have the ATI Radeon HD 5700 video card which I just updated to the latest drivers 14.10.1006-140417a-171099C (which helped a little, as went from stopping at 0.01% to getting almost half way). I do not have GPU acceleration enabled, and the sequence has the "Composite in linear color" unchecked.
All footage was shot on the Canon 7D (MOV files). The project was created originally in CS6 with the HDV option, and the sequences used the DSLR 1080p24 preset with no modifications (although the "Composite in linear color" was unchecked recently). When I replaced CS6 with CC, I opened the project and let Premiere Pro convert it to a CC project.
As for the sequence itself, it has two video layers and five audio layers. I use Red Giant Color Suite II, and all of the clips have Denoiser II and Magic Bullet Looks filters applied. Some of the audio just has fades and blends applied.
I have been loathe to start from scratch considering the time I've already invested. However, if I do would it make a difference if I simply imported the old project or would I need to just import the footage only and start over?

Premiere Pro trial won't download and it isn't listed in my creative cloud

Premiere Pro trial won't download and it isn't listed in my creative cloud. It is frustrating... it says it is downloading but it makes creative cloud pop up and I then can't find it listed . I just want the trial. I have done trouble shooting on cchromeand on my computer.

See if your machine meets the system requirements for the software. CC will not list applications that will not work with the system.
Premiere Pro - http://helpx.adobe.com/premiere-pro/system-requirements.html

Premiere pro cs4 is adding an extra frame to my sequences

Premiere Pro CS4 is adding an extra frame to my sequences so that when I import them into Encore an extra, black frame plays at the end. In the program monitor my sequences stop at the frame I have set the sequence to end at but the counter on the bottom right of the program monitor shows that an extra frame has been added. This duration, not the duration I have set for my sequence, is what Premiere Pro is importing into Encore. I have spoken to Adobe technical help and the representative was having the same issue but she could not resove it. Help! Thank you!

Hello Wil.
For various reasons, I always add Black Video to the end of my Sequences, to allow for any extra Audio Units. As I also Export DD 5.1 SS, I allow 02 sec. of Black Video at the beginning, to allow set-top players time to "lock onto" the DD 5.1 SS Audio Track. Many high-end units require this extra time at the beginning, too.
Good luck to the OP,
Hunt

After download and installation, InDesign, Flash, Dreamweaver and Premiere Pro all won't fully launch.

After download and installation, InDesign, Flash, Dreamweaver and Premiere Pro all won't fully launch. From the Windows icon pane, I click on the program, it opens the Sign In Required pane, I sign in, it opens the Thank You pane and reverts back to Sign In pane or never opens the program.
Acrobat also keeps giving me a popup to sign in, each time I look at a .pdf file.
I have tried uninstalling Acrobat and then redownloading. It didn't work.
Anyone else find a fix?

Sign Out When Sign In http://forums.adobe.com/thread/1450581?tstart=0 may help
-and http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html

Why is Premiere Pro CS6 crashing during render at 50% completion?

I am running Premiere Pro CS6 on MacBook Pro, flash drives. The Mac is brand new. Nothing else is running. No other non-factory programs are installed.
Regardless of what I do, during export to any output type, Premiere crashes when it's rendered to 50%. I take the same project and only render part; crash at 50%. I try another new project, with nothing but a single video file, crash at 50%.
<frustration>I am about to run to Final Cut, and I really don't want to. I am losing money and time that I don't have.</frustration>
Any feedback would be majorly appreciated.
Thanks,
Aaron

...MacBook Pro, flash drives....I take the same project and only render part; crash at 50%. I try another new project, with nothing but a single video file, crash at 50%.
Make sure you are not running out of available space
on your target drive for the export.

Premiere Pro CS6 won't play imported files even after changing format, etc?

Camera: Canon Legria HFM41
Video file format: MTS (1920 x 1080)
For the past few days I've been trying to understand why my video files won't play in Premiere, I'll import them, and when I press play the audio will work, but the video will play smoothly for only a few seconds then stop, skipping frames/slowing the speed of the video - I've read a lot of these forums on similar issues, then I tried converting the format to avi/mp4 and they still won't play smoothly when importing to Premiere Pro.. Does anyone know what I may be doing wrong/how to solve this.. Thank you!
Shanna

More information needed for someone to help... click these links and provide the
requested information
-http://forums.adobe.com/message/4200840
-http://forums.adobe.com/thread/416679
-http://forums.adobe.com/thread/419406

Premiere Pro CS6 Crashes on Render Timeline and also Export

Hi, The Last few days Premiere Pro has been crashing during either export of a sequence or during render of timeline.
This also happens if I import the timeline into AME and try to render from there.
The Files on the timeline are 720x576 progessive @25fps Avi Type 2's
I've tried outputting to a number of file types with the same crash. Also I have Premiere Elements on the same machine and this does the same!
This had been working fine the past few weeks, can't understand why its stopped now.
I've also tried uninstalling CS6 and reinstalling it. and also keep all updated..
Also reading some other posts, i also uninstalled Itunes in case the latest update has caused problems. Unfortunately i don't have restore point from before the problem started happening
although i do have a backup on another drive.
I should also mention that i've done a number of virus scans as well with a couple of products just in case of that.
Machine is Win 7 64 bit. I7 Quad 2600 (3.4gig), 10gb Ram, Blackmagic extreme input card, and Duo input card. The Video Card is internal to the board (Intel HD Graphics...which performs ok for what i need it for )
any help would be appreciated to get up and running again.
cheers
john

Well, I think i finally have got to the root of it...These files were recorded using Blackmagics Mjpeg Compressor, and that seems to be the problem.
Rather than recoding the files (difficult as AME would fall over as well!) I ran them through my digital desk again (Vmix) playing them back and re recording them using AVi and the normal dv option...this time the files produced would render and output...hoorah now see if i can finish it..will report back, but this seems to have sorted me out.

Premiere Pro CC won't load and I can't uninstall it.

Hi, I was using Premiere Pro yesterday and it worked fine. I haven't done any updates or anything. Today I tried to use the software and it doesn't even load the logo. As soon as I open Premiere, Adobe's App Manager pops up on the dock and then goes away. Premier Pro stops loading soon after that.
I'm trying to uninstall the program and it's not even responding. I don't know what else to do......
I'm using a 2011 IMac with OSX Version 10.9.4.

Maybe this will help, see post 6.
Premiere CC 2014 won't open at all! Help

Premiere Pro CC2014 Playback issues, Render issues, Serious Error issues

Here's my problem. Premiere Pro CC worked amazing. Never had any issues with playback, rendering - nothing. However, CC 2014 appears to be quite different. Yesterday I literally had to restart Premiere every 20 minutes! Out of no where video playback would stop. The playhead would continue and I could still here audio, but I either saw a still frame of video or it would go completely black. The only way to get out of Premiere was to force quit. I also was not able to save the process I had made over the last 20 minute session. You can imagine my frustration as I have clients in with me on this edit. I need to know a fix and I need to know it quick. If Adobe wants to be in the professional game, they need to fix it ASAP.
Here's what I'm running.
Late 2013 Mac Pro
OS X 10.9.5
Processor: 3.5GHz 6-Core Intel Xeon E5
Memory: 12gb 1867 MHz DDR3 ECC
Graphics: AMD FirePro D300 2048 MB
Who can help? I'm looking at you Adobe.

I am having the same exact issue. Adobe, please help us!!!

Premiere Pro CS6 for Broadcast ProRes HQ Frame rate issues

I switched from Avid to work on a quick project with DSLR footage shot on the 5D Mark III at 29.97 psf which is not to be confused with 29.97i, a standard frame rate necessary for broadcast. So the commercial spot was cut together, I punched in the proper settings (the very same settings that work with Avid 6.0+ and Final Cut Pro 7), and hit export. When exporting either a Quicktime Animation or Pro Res file from Premiere Pro CS6, premiere creates a file with a faulty framerate, it comes out as 28.4 instead of 29.97. I thought I was going crazy, but no, there are tons of documented experiences with 23.94 being 20-something, and on an on. It seems as if Adobe did not do a good enough job with integrating the Pro Res codec into their software. The only way I could get around it was to export to something else (Blu-ray H.264 at 29.97), and then re-encode that file to Pro Res HQ with either compressor or adobe media encoder. The problem lies in exporting progressive footage as interlaced, it just completely screws up the frame rate. The worst bit is that, I need Pro Res HQ for the distribution house for the commercial spots, they require the ProRes HQ MOV at 29.97i and if anything is off, I get charged for it.
Does anyone else have problems with Adobe Premiere lacking on the professional end? Or similar experience with this problem?
Just do a search for pro res frame rate issue premiere and you will see a lot of other users with the same issue.
Thanks,
C
System Config:
Mac OSX 10.8.2
2.7GHz Intel Core i7 MacBook Pro 15" Mid 2012
NVIDIA GeForce GT 650M 1024MB
16GB 1600 MHZ DDR3
256GB SSD + 750GB SATA (no CD/DVD)
Premiere Pro CS6 (latest)

Read the Warning here: http://ppbm7.com/index.php/tweakers-page/85-raid-or-not-to-raid

My premiere pro cc won't open

Hello,
I have the creative cloud suite and am trying to open premiere pro but it won't open. I've used it in the past on this same computer. What gives?

Hi Alex,
I'll Show you that there are some sources of error:
1. Maybe you have to activate/deactivate, so please have a look there:
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
2, Sometimes, we know in the meantime, the "opm.db file" is the culprit. In this case you should delete it.
3. Did you already try "uninstalling and re-installing"? Be careful with (de)installing aso. by (de)installing by your own resources. As much as I regret it and as strange as it may seem I fear it's a challenge for Adobe's Creative Cloud Cleaner Tool.
Sometimes - for whatever reasons - CC doesn't "want" to work. In this case you should CC completely delete and reinstall by help of Adobe Creative Cloud Cleaner Tool. (A try to uninstall by own resources is not enough!)
I quote: ... helps resolve installation problems for Adobe Creative Cloud and Adobe Creative Suite (CS3-CS6) applications. The tool removes installation records for prerelease installations of Creative Cloud or Creative Suite applications. It does not affect existing installations of previous versions of Creative Cloud or Creative Suite applications.
Please use: http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html and follow the prescribed sequence of operations
4.If necessary and for further questions click through http://helpx.adobe.com/contact.html and if "open" please use chat, I had the best experiences.
Good luck!
Hans-Günter

Premiere Pro CC won't render single frame cuts.

Similar Messages

Maybe you are looking for