Premiere PRO Crashes when exporting to H264

I'm running Premiere Pro 6 on a Windows machine. I find if I export a sequence of over 30 mins length to H264, HD 1080i 25, it regularly crashes - I have the box marked 'Maximum Render Quality' ticked. Would appreciate any advice on how to prevent this!

It would be very helpful to know the full details of your computer, your Source Files, and your Sequence Settings. See this FAQ Entry for what info you should post: http://forums.adobe.com/thread/961741?tstart=0
Good luck,
Hunt

Similar Messages

Premiere Pro crashes when i start it up. Help please :-)

Premiere Pro crashes when i start it up. Help please :-)

Go to Adobe Premiere Pro CC error on start and answer all the questions I posted in reply #1

Premiere Pro crashes when I open my project because the cursor is stuck on a time-lapse sequence

I have a Time-lapse sequence which I have just built and saved the project of, but my cursor has stopped on the time-lapse sequence. Premiere Pro does crashes when I open my project because the cursor is stuck on the time-lapse sequence.
My project was saved in Premiere Pro with the cursor stuck on my new time-lapse sequence. Now, Premiere Pro crashes when I try to open the project....Please help URGENTLY?

>It may be a corrupt font, but I have thousands installed. Is there any way to test for that?
Reply #8 was specifically to address this question.
>I basically wanted to know if this is a 3.2.0 issue or not.
That's not what you asked. Perhaps asking a specific question will get you closer to a specific answer?
The titler does not crash for me at any stage of the Adobe updates for Premiere Pro, including 3.2.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Using Premiere Pro CS3 When exporting as flash file poor picture quality

I'm using Premiere Pro CS3. I shoot green screen in HDV and work in 1440 x 1080. I have been capturing files in Premiere and sending them to Serious Magic Ulta 2. I use this program for keying and adding virtual backgrounds. I save these files as avi. with a resolution of 1440 X 1080. I then bring them back into Premiere Pro for final edit. When I export these video's encoded as mpeg2 theyplay very clear. I am now trying to export as flv. with alpha channel background and the resolution is poor. I working on the transparent background with walk on spokespersons that overlay the HTML page. When In try to play them on my computer the adobe media player is what comes up. I have downloaded flash player but it doesn't select it to play the video. I'm running windows Vista Business platform. What am I doing wrong.

Thanks for the reply.
The capture and editing have already been done in 1440 X 1080. Should I use this resolution rather than trying to bump it up to 1920 X 1080.
Thanks
Bill Bennett
Date: Fri, 2 Sep 2011 07:33:04 -0600
From: [email protected]
To: [email protected]
Subject: Using Premiere Pro CS3 When exporting as flash file poor picture quality
Computer playback generally prefers square pixels. Make sure to set your output resolution to 1920 x 1080 using a Pixel Aspect Ratio (PAR) of 1.0 or Square.
See if that helps.
>

Premiere Pro crashes when writing marker notes

I'm on the trial version of Premiere Pro and when I place a marker on a clip in the source window, then write a note for it in the marker tab of the browser window, it quits repeatedly. What's up with this? I thought I could use markers in this way.
Thanks.

Welcome to the forum, Sharon.
What exactly do you mean by "the marker tab of the browser window"? Are you referring to the Markers panel in Premiere Pro? What happens if you double-click the marker icon, which opensthe Marker dialog, and type there?
What kind of content? Please check whether the files are write-protected, locked, etc., and whether you have the necessary user privileges to modify the files. (This could be important because clip markers are written into the files on disk, though I've never heard of PPro crashing on account of files being locked or something in that vein.)
Do you get an error message or a crash log?
Exactly which version of PPRO?
What operating system?

Premiere Pro crashes when opening the program. what to do

Premiere Pro crashes every time when opening the program. Other creative cloud programs are functioning well. What to do?

You may get more specific help in that forum http://forums.adobe.com/community/premiere
When you go there, you need to provide a LOT more information for anyone to help
-PPro Information FAQ http://forums.adobe.com/message/4200840
Also, Go to http://forums.adobe.com/community/premiere and, in the area just under Ask a Question, type in
crash on launch
You may now read previous discussions on this subject... be sure to click the See More Results at the bottom of the initial, short list if the initial list does not answer your question

Somebody know how to fix that? Premiere Pro crash when i try to load some project

Hi!
I work with Premiere Pro CC
When i try to open a project ( only that project) i have this error message:
[/sirreact64/releases/2013.03/shared/adobe/MediaCore/Backend/Make/Mac/../../Src/Content/Vi deoMediaContent.cpp-175]
How can i fix that?
thanks!

Hi 0dbVideo,
Thanks for choosing adobe forums,
please provide following information :
What is the OS and version ?
What is the Graphics Card installed on the system ?
How much Ram do you have ?
Do you use any external Hard Drive ?
Are you using security software e.g. Norton, etc
and
if windows, Please check if you have windows defender turned on ?
Regards,
Sandeep

Premiere CS5 Crashes when exporting

Yeah, sounds familiar. I hate to add yet another discussion on this, but I have a specific question. . .   s
I have an Intel i7 965 with 6G of Ram; lots of disk space and running Win 7 64 Bit.
I have been running the CS4 version of Premiere Pro for sometime, and just downloaded, installed CS5. This new project is the first one, and was built new, not 'converted' from a previous version.
The sequence (there's only one) has a number of clips in video track 1 and about 10 titles in video track 2. The entire length of the sequence is 1 hour and 15 minutes.
When I export to an AVI file, it begins to 'render' but crashes at about 74 percent completion. That is about 56 minutes into the sequence. I assumed I would find the offending title or effect (there are not many effects in use) at that point in time, but, of course, at that point, it is about 7 minutes into a clip that is about 25 minutes long. Nothing else is at that point. Just the video clip.
So, I removed the video clip and it exported just fine.
So, I created a new project and imported the offending video file - which, btw, is the same as the others, an MPG file.   It gets to about 8 percent complete and crashes.   No titles, no effects, just add the asset and export. Crash. I shortened the clip until it finally rendered - about 6 minutes long.
Any ideas?
The original project - with the offending clip - rendered once. I don't recall what settings I had, but it did make it through the entire sequence. I've not been able to do it again.

The source file was created by playing a (VHS) tape player into a Hauppauger video interface and Beyond TV software. I simply recorded the tape (which I can do again if I have to), and Beyond TV was configured to create a MPEG2 files.
So, once created, I import the file into PP. The 'dimensions' of the MPEG file is 720x480 and 29 fps. Same as the sequence I loaded the clip into.
I can only assume there is something wrong with that one place in the clip. The actual clip is about an hour and a half long - I was only using the first 20+ minutes. I have rendered the rest of the clip (that AFTER the problem area) with no issue.
I can do back and re-record that part of the VHS tape where the problem is, and maybe that MPEG file will be OK. . .
It's taken all day, but what seemed to be a Premiere Pro issue (it just happen to be the FIRST project I created with the new CS5 version), now seems to be data.

Premiere pro crashes when opening project

Premiere pro project crashes when opening. I have an imac running OS 10.7.3 (8GB Ram, AMD Radeon HD 6970 2048mb) and have Premiere Pro 5.5.2. I have had 2 projects that I have worked on for hours and saved numerous times and then when I closed pp and tried to reopen the file the screen goes white and then crashes. Please help.

Ann, THANKS for replying!
If I open a brand new project, which I could do before, and then IMPORT a previous project, it works and I can edit and export the project. However, it did crash upon trying to save it and I still can not just open a previously created project. When I do I get an error message that Says: "Premiere has encountered an error and needs to close down. We will attempt to save your project."
Do you or anyone else have any ideas?

HELP!!! Quicktime Pro crashes when exporting

I've had no problems until today. All of a sudden, when I export a movie from quicktime, it crashes when I click on "settings" of the codec. So I basically open the file, go to "File>Export" and click on "Options". I then click on "Settings" and boom...quicktime disappears with your usual windows error sound. Like I said, I've had no problems up till today so I don't know what I could of done to cause this. I'm running Quicktime Pro 7.2 on Windows XP Pro 64bit. I've tried uninstalling it and tried older versions...nothing seems to work. My Sorenson Squeeze software also will not load quicktimes which I believe is related to this problem. Any ideas?

Sorry to hear you are having the same problem but I'm glad its just not me. I seriously don't know what I could have done to cause this. Some sort of bug or virus going around? I've heard of quicktime being hacked in the past by a worm which causes it to crash so I'm wondering if that's what's happening. It does suck you can't really call Apple about it.
Its becoming increasingly difficult these days to talk to a human about technical issues. If you do get one on the phone, its some support person getting paid min. wage who just puts you on hold forever as they look up your problem in a generic list of "help" files. I don't want knowledge base support...I want one on one support with a trained programmer who knows how to fix your problems!

Premiere Pro Crashes when I open the titler

I just formatted my computer and reinstalled the CS3 suite on XP Pro with SP3.
When I open the titler and click on a font, Premiere crashes.
I think it may be the 3.2.0 update.
Is there any way to uninstall it?
Or to get it not to crash with 3.2.0?

>It may be a corrupt font, but I have thousands installed. Is there any way to test for that?
Reply #8 was specifically to address this question.
>I basically wanted to know if this is a 3.2.0 issue or not.
That's not what you asked. Perhaps asking a specific question will get you closer to a specific answer?
The titler does not crash for me at any stage of the Adobe updates for Premiere Pro, including 3.2.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Premiere Pro crashes when importing audio

I am using Premiere Pro CC, 2014.0.1 Release, 8.0.1 (21) Build
This is updated
Operating System: Windows 8.1 64-bit (6.3, Build 9600)
Using AVI and WMV videos. The audio file I am trying to import is MP3 Format Sound (.mp3)
The error message is Adobe Premiere Pro CC 2014.0 has stopped worked, below that it indicates that Windows is looking for a solution.
Trying to put an audio in with my assets, so I can add it to the sequence.
This is the first time I've tried to do this one my Windows 8 laptop.
Google Chrome is running, Articy Draft 2 is also open. All other programs are background programs.
No 3rd party effects or codecs are installed.
System Manufacturer: ASUSTeK COMPUTER INC., Processor: Intel(R) Core(TM) i7-4700HQ CPU @ 2.40GHz (8 CPUs), ~2.4GHz, Memory: 16384MB RAM, DirectX Version: DirectX 11,
I have a Nvidia so I don't believe I am using Mercury Playback Engine GPU Acceleration
It also happens when I go into the Media browser in my music folder.crash

We're going to need more information: http://forums.adobe.com/message/4200840#4200840
Do you get any error message or crash report?

Premiere Pro crashes when scrolling in Icon View

Dear Adobe Community,
My Premiere Pro CC crashes EVERY TIME when I switch to Icon View from List View, almost as soon as I start scrolling through the Icons/thumbnails.
I have all the latest updates for my Mac, Premiere Pro CC and my nVidia CUDA drivers. Also, my Renderer is set at the CUDA setting.
I would greatly appreciate someone's help. Thank you in advance.
Regards,
Dave

What is the pixel size of the photos?
Try updating or rolling back your video driver.
Try disabling GPU acceleration.

Adobe Premiere Pro crashing when doing nearly anything?

Usually, the program crashes when I import a file. If it doesn't crash by then, it will crash when I move a file to the timeline or create a new sequence with the file. I have reinstalled the program four times, and the errors persist. I've had the creative cloud on my computer for about a month, and I've always had this problem. Never had time to deal with it until now. I'm running a Windows 7 64 bit desktop. Can anyone help me fix this?

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
•What is your exact brand/model graphics adapter (ATI or nVidia or ???)
•What is your exact graphics adapter driver version?
•Have you gone to the vendor web site to check for a newer driver?
•For Windows, do NOT rely on Windows Update to have current driver information
•-you need to go direct to the vendor web site and check updates for yourself
•nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
•ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
-and a fix for at least "some" ATI crashes https://forums.adobe.com/thread/1553342

Premiere Pro crashing on export (windows)

Hi all
I have looked into the solution to this problem on the forums and it seems to be a mac only problem. However I am using windows 7 64bit.
I go to export>media it thinks about it for a few seconds and then premiere freezes, 'stops working' and crashes to desktop.
The project is less than 2 minutes long with some minor color correction, contrast and a bit of text. It has repeatedly done it with this project while others export fine.
Tech specs are:
Premiere Pro CC
Windows 7 64 bit
Intel(R) Xeon(R) CPU E5-2620 0 @ 2.GHz
32 GB RAM
AMD Firepro v5900
Any help or ideas would be greatly appreciated

Hi john
I have found what was causing the problem, an errent large .psd file had found its way into the project and was causing the crash.
Its now been resized and all is well.
Thank you for your time

Premiere PRO Crashes when exporting to H264

Similar Messages

Maybe you are looking for