Premiere Pro CS 5.5 does not recognise Nvida Quadro 2000d
I build a system with the following specs:
Intel i7
PNY Nvida Quadro 2000d
Windows 7 professional
8 GB Ram
128 SSD
1 TB x 1 TB Raid
I bought the boxed version of Production Premium CS 5.5. As I see in Premiere Project Setup, I have only MPE software only and the optoin is deactivated. However, as I see OpenGL in After effects is Quadro 2000d and it is working well. Did any one have similar experice? Looking desperately for some help.
In the Premiere program folder on your system drive, run the executable labled:
GPUSniffer.exe
If that doesn't make mecury playback available, install the latest NVidia drivers from their website and try again. If that doesn't work, make sure the name of your Video Card listed in the cuda_supported_cards.txt text file in your Premiere program folder. Quadro 2000D was listed in mine.
Also make sure your card is recognized by your system as a "Quadro 2000D"
Similar Messages
-
Satellite Pro A300-1H2 - Windows does not recognise HDD
Hi,
i'm a newbie, this has probably bin asked before so if it has you'l have to excuse me, i have a satellite pro A300-1h2.
I got the blue screen unmountable boot volume, so have tried to fit a new samsung drive. I put in my windows disc it loads all the drivers then says there is no hard disc?
In bios it recognises it ???
Thanks if anyone can helpHi
The problem is that your notebook supports the HDD SATA controller but the OS system does not contain the SATA drivers
You could set in BIOS the SATA mode to compatible.
This will allows you to install the OS without the installation of SATA drivers.
Greets -
Since I've upgraded to Maverick on my Macbook Pro the airpot utility does not recognise that there is a time capsule on the wireless network. I can see the TC using the air port utility on my iPhone5 and on my iPad. What am I doing wrong on my macbook?
I have over 250G backed up and I really don't want to reset everything and start again.
Not sure what you mean here.
A reset will not affect any of the data on the Time Capsule hard drive. You would have to perform a completely separate and very deliberate Erase Disk operation for that to occur.
I'm not recommending that you perform a default reset, but it is an option if there is really nothing else to try.
I don't know if what you are seeing is a Mavericks issue or not, since I refuse to use any new software until at least the first major update with fixes comes along.
Another user may be able to offer more input on Mavericks. -
I have a 16GB iPhone 3GS. Tried synching my phone through iTunes (11.0.1 I think... on a 2009 Macbook Pro). Now when I connect to iTunes, it says it does not recognise the content on my phone. Is this because my phone (and laptop) are too old?
Also, when I tried to Restore the settings, an Error Message pops up that says " The iPhone software update server could not be contacted. The requested resource was not found.
I'm trying to free up space on my phone by removing [literally] thousands of old photos which were originally synched to the phone, because I had forgotten to uncheck the photos button when I synched it ages ago.
I have also tried synching it on my 24" iMac (running OSX Snow Leopard). But again, when I try restoring the phone through itunes, it says the file is corrupted. It sggests unplugging the device, and then plugging it in again. I have done this numerous times with no success.
I'm guessing it must be because my phone (and versions of iTunes, and OSX) are all too old.
Please can anybody help.
Cheers,
Dan_nz.There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
-
I am a windows user that has converted to Mac and loving it but when I updated to Lion my wireless internet dongle would not work anymore and the Macbook Pro does not recognise the device at all so I am unable to reinstall it again. Any ideas would be greatly appreciated.
Go to Finder > Preferences then select the General tab
Make sure External disks is selected. -
My Imac and macbook pro stopped accessing my MP640 via the home wifi set up, so I sent all the canon software to the trash on both computers, thinking I should reinstall the software I got with the printer, but the software does not recognise os 10.7.5. I am using a netgear modem. I also use time machine to back up to time capsule.
Your Canon Pixma MP640 driver:
http://support.apple.com/kb/DL899 -
My Mac Book pro does not recognise the wi-fi net. How to fix it?
My Mac Book Pro does not recognise properly the Wi-Fi net at home. I've tried many ways in "preferences", but it realy does not work. When connected in the Ethernet port, it works perfectly.
Don't have any problems with other computers at home.I don't know what you mean by "doing new concessions on DHCP"!!??? Have you tried using a static IP address to see if it works that way? Have you restricted the range of DHCP addresses available at your router? If you have maybe the other computers have used up the available range. Suggest you try a static IP address first, then we'll take it from there.
-
I have iPhone 6, 8.3. I cannot use bluetooth at all from my device, even to connect my macbook pro. I did all the recommended trouble shooting such as reboot and reset network settings. but it does not recognise any bluetooth device. Pls help.Thank you.
See iPhone BT profile on what can be connected/paired:
iOS: Supported Bluetooth profiles - Apple Support
And BT troubleshooting:
iOS: Troubleshooting Bluetooth connections - Apple Support -
My laptop with macbook pro with maverick was working fine with a dongle AVERTV VOLARGO to capture tv programmes but now with yosmite it does not recognise what options have
I also understand that there is particular software 'TRIM' a software introduced by CINDORI SOFTWARE which will disable KEXT SIGNING a security application of YOSEMITE ,Is it the only option or there are any better options for this
-
I am trying to install a brand new WD 500 gb sata internal hd in my macbook pro. the original install dvd does not recognise the hd. all hardware is ok. any help?
For some reason OS X disks (whatever edition or flavors) that are supplied with Apple products only seem to contain a limited knowledge of available hard drives on the market at the time of thier publishing. This (rather opportunistically) creates a "Best Before" stale-OS X-software-copy situation where upgrading to or replacing a defective internal SATA hard drive with a newer, better or larger one is a largely hit and miss affair.
If you buy the latest and greatest disk drive available for any older Mac you are likely to run into unresolvable problems making a clean re-install of your own, old edition or flavor of OS X onto any newer or larger hard drive since the OEM (gray) "OS X Install Disks" that Apple supply with retail products seem to contain only time-sensitive lists/mapings of then-known target drives that the Drive Management Tool in the then-published old "Installer Software" will support.
Presumably new (colorful "X") retail versions of OS X (10.whatever.whatever) also contain time-limited Installers with limited knowledge of and adaptability to/compatability with a limited number of old hard drives then kicking-around on the market.
This is especially a problem nowadays since the countless "puny old" hard drives that have been on the market are largely obsolete in a few months time, as manufacturers continue to produce larger and cheaper units, discontinuing older puny products... So if your drive fails you need an exact old (or similar familial) replacement drive for your "backup copy of OS X" to do a fresh, clean OS X re-install. Otherwise you need to purchase a new retail version of OS X, since yours is now effectively obsolete. Purchasing an old, puny drive to re-install your version.flavor of OS X to avoid buying a new version of OS X is a rather false economy.
If you still have a working old hard drive with your old polluted 10.version.flavor of OS X still working on it you apparently must clone it with Time Machine or the newest version of Disk Utility (disk image copying) to most newer, larger drives, and a clean reinstall to such new hard drives is not possible. -
Using a Huawei datacard. Didnt have problems with my old Macbook. My new MacBook Pro sometimes does not recognise it and Message flashes "Device disconnected or not available
Hi
Hope you found a solution by now.
I reply because others might encounter the same problem.
Mine was the one described here:
https://discussions.apple.com/thread/2656776?start=0&tstart=0
I also installed the latest version ov Mobile Partner (16.x)
Cheers,
Nick -
Since upgrading my Mac book pro with Yosemite, I have problems with my Xerox Work Centre 3045 printer. The printer works normally but it does not recognise scanner, I can not scan anything. Can you help?
Open Disk Utility and select your hard drive, then Repair Permissions, it will probably return a very large number of errors, primarily printer and library errors, so run it a second time. Then restart the MacBook Pro. If it still will not scan, try using Image Capture from Finder > Applications and see if that will work. If not, contact Xerox about updated drivers.
-
My Imac late 2012 running Yosemite does not recognise my Huawei 3g usb modem. itried to install Java bt still it does not although the same modem works with my MacBook pro . any help please
Hey there mbarikiwa,
If your iMac still has not recognized the usb modem, I would use the troubleshooting for Yosemite USB issues in the following article:
OS X Yosemite: If a USB device isn’t working
If the device is connected to a USB hub:
Make sure the device and the hub are the same speed. Connect USB 3.0 SuperSpeed devices to a USB 3.0 SuperSpeed HUB, USB 2.0 Hi-Speed devices to a USB 2.0 Hi-Speed hub, and so on.
If the device doesn’t have a power cord and is plugged into another USB device that doesn’t have a power cord:
Try plugging the device directly into your computer’s USB port or into a USB device that does have a power cord. You might need to disconnect and reconnect the other device as well, if it has stopped responding.
If you have many devices connected to your Mac:
Disconnect all USB devices except the device you’re testing, an Apple keyboard, and an Apple mouse. Make sure that the device is connected directly to the computer, and that any hubs or extension cables are disconnected. If you can use the device now, the problem may be with one of the other USB devices or hubs you had connected to your computer. Try reconnecting them, one by one, to your computer. When you find the device causing the problem, review its documentation for further troubleshooting steps.
Verify that the device appears in System Information:
Choose Apple menu > About This Mac. In the window that appears, click Overview, then click the System Report button to open System Information.
In the window that appears, see if the USB device is listed below Hardware in the Contents list. If the device appears but does not work, review the device’s documentation for further troubleshooting steps.
Restart apps:
Quit and restart any apps that use the device.
Restart your Mac:
Choose Apple menu > Restart.
Check your device’s USB connection
Thank you for using Apple Support Communities.
All the very best,
Sterling -
Re: Satellite Pro A300 - DVD drawer does not open most of the time
I have a Satellite Pro A300-1NH laptop. The DVD drawer does not open most of the time. Occasionally it does, but most of the time it does not.
Sometimes if I manage to get a DVD/CD into the drawer to burn something to, the burn works.
Most of the time the computer does not recognise that there is a disc there, and then I can't open the drawer again to get it out.
Can anyone tell a novice what I need to do to sort this out please?Have you noticed this when you try to open drawer using eject button in the drawer itself?
Almost every player has integrated eject button. Can the drawer be opened using this eject button? -
Prem 8.0.1 does not recognise DV camera
Adobe Premier Elements 4.0 and 8.0.1
Windows XP SP3, AMD 5600+, 4G RAM, 1394 connection
NVidea GeForce GT 240 video card, latest driver updates
Sony TRV-240 Dig8 Camera
Sony camera is recognised by Windows My Computer, AVS Video Recorder and Windows Media Encoder with capture capability.
Premier only recognises camera as "Microsoft DV Camera and VCR" and does not capture.
How to get Premier to recognise camera and capture video?Re: prem 8.0.1 does not recognise DV camera
created by A.T. Romano in Premiere Elements - View the full discussion
omni60
Premiere Elements 4 or 8.0/8.0.1 on Windows XP 32 bit.....Yes
Are you set up with a FireWire (iLINK) connection for this DV Data capture?
Yes, as indicated by the 1394 connection statement.
From the screenshot, it appears that you only have 77 GB free space at the save location for the DV data capture. Can you point the Captured Video and Captured Audio to another save location with more free hard drive space?
Have moved to 300GB free space. no success.
Is this a "it worked before but not now" or "it never worked before" for Premiere Elements 4 or 8.0/8.0.1?
worked a few years ago marginally probably on Prem Elem 4.0. Have rolled-back NVIDIA drivers to 296.10 dated 14 June 2012 with no success
As background if needed, please review the following Adobe document on Capture
http://help.adobe.com/fr_FR/premiereelements/using/WS5CDA0F91-60F1-4b7 9-ABF6-E9E75F498DB2.html#WS2AF26FB5-4C63-4c46-9DB3-7249558F6528
Although it targets newer versions, the principles should be applicable to Premiere Elements 4 and 8.0/8.0.1.
Have read, no fixes.
Please review and consider and then we can decide what next.
Have removed NVIDIA card and am using on-board DVI port. Prem 8.0 still reports "Microsoft Dv Camera" and not Sony as other programs do. What causes Prem Elem to not report Sony DV camcorder?
Thank you, will keep trying.
Maybe you are looking for
-
I just moved and am setting up a new apartment. Verizon put in internet service yesterday. I got a network going on my airport extreme but it could not connect to the internet because it says it has no DNS servers. help! What do I do now?
-
TradeMark Symbol and Registered Symbol are being replaced by question marks
Hello Everyone, I am using RTF template to generate report in PDF, otherwise "Trademark and Registered" symbols from the field data are being replace by "question marks". Any suggestions please. Regards Charan
-
What is the fundamental difference between trust store and key store ?
-
E-rec Errors in search of candidates in e-Recruiting portal and transactio
Hi, please need help to: 1. In e-Recruiting portal under the tab "recruiter": "Services-Candidates-Search for candidates" running "Search button" and are 3 internal error (no detail of the error). If we ignore the errors and rerun the "Search button"
-
How do I store data on the Time Capsule. I keep getting an error on my macbook air telling me my drive is full and I must delete files. Can I just move them to time capsule to solve the problem? If yes... how do I do that?