Premiere Pro CS2 - Audio track prevents sequence play in program monitor

My sequence consists of 1 Video Track, and 2 Audio Tracks. The "Video 1" and "Audio 1" tracks in the sequence consists of subclips taken from a master clip avi in the Project Panel captured from my video camera, and "Audio 2" in the sequence are MP3's that have been imported into the Project Panel. The sequence plays fine and I'm able to make edits as long as the "Audio 1" track of the captured avi is disabled, and with "Audio 2" enabled. But when the "Audio 1" track is enabled, the sequence will not play in the program monitor, and the entire program freezes up until I disable the "Audio 1" track, or otherwise the program just crashes.
I've Googled my brains out today and yesterday, and I've reviewed all the program settings to the best of my knowledge. I'm trying to produce a video that allows me to mix between the "Audio 1" track and the "Audio 2" track, but can't figure out why the "Audio 1" track prevents the sequence from playing in the Program Monitor.
My soundcard is Creative SB Audigy 2, on Win XP. Can someone please help me understand what I'm overlooking?

Thanks Hunt, this was some solid information, especially the link. I believe I've figured out the problem though... and it was ME!
I didn't want to do it, but sometimes when you have a stubborn problem, it's best to just start all over from the beginning. It turns out that what I thought was a developing masterpiece, was in reality only a HOT MESS, lol.
The problem seemed to be in the way I created the subclips, in regards to whether the video and/or audio was selected, with respect to the in & out points, and with how those subclips were placed into the Timeline. The problem was definitely in those subclips (...it's like the Timeline didn't know what to do with them). Once I went back, checked the source avi and master clips to verify they were intact, and being more careful in how I added the new clips into the Timeline, the audio from the imported video AND from the MP3's are now playing just fine in harmony, and I'm able to edit the sequence in the Program Monitor and with the Audio Mixer (...just as I suspected I was supposed to be able to do).
Funny how when you think there's a major problem, it just turns out that the program was only doing what you were telling it to do, lol. Thanks so much for stepping up and helping out Hunt. It's so frustrating sitting by the computer, hoping someone will come to the rescue. Your response was exactly the gentle guidance I needed. Much appreciated!

Similar Messages

Premiere pro: multiple audio tracks in a single take. (Workflow for audio mixing outside premiere)

Hi I am an editor from Finland.
I need to sync multiple audio tracks (like 2 stereo and 4 mono) to different takes before i start to edit. You see, after the editing I will create an OMF file for the sound editor who needs all the audio tracks to work with. I have noticed however by just nesting (puttin video and audio clips in a single sequence) the resulting sequence placed on in the main sequence is flattened into stereo (not multichannel). You see my problem here? I am surprised, because i have always taught that this is a very normal workflow and so far i haven't found a single tutorial or a guide for this problem.
Just to make sure we're on the same page: I know how to sync video and audio, just not so that the 6different audio tracks in all my 120 different takes that i edit into a single sequence will have the 6different audio tracks in the audio post production (which is done in protools, maybe...)
Oh yeah, Premiere Pro CS5

Hi!
This is the case when i get a master clip with all the audio tracks in it. I however got separate files, a bunch of different video files (with stereo track), for every take a boom mic audio track, and a few tracks for all the microphones on the actors. Now after i import these into premiere, how will i proceed so that after i have synced all the audioclips to all the video clips (by nesting?) I will still have all the audio clips intact in the OMF file I will create.
Last time i created omf, all the clips had turned into stereo because of nesting. Is the only way to avoid this by joining the video and audio clips into multichannel audio clips with another program before importing into premiere?
I am not very good at explaining... Problem: I get a video and 10 audio tracks. I join them by putting them into a sequence. I repeat this about a hundred times (for every take). Now i start to edit. I create the main sequence in which i clip pieces from all the hundred takes. In the main sequence the clips have only one stereo track. When the movie is finished I create an OMF for the sound guy. The sound guy asks me why are there only 2 tracks per clip? Where are all the 10 separate audio tracks?

Premiere Pro CC Audio Track Titles Missing

Since updating to Premiere Pro CC from CS6, I lost the audio titles at the top of each audio track in the timeline. These were important for me to stay organized and for my workflow. Is there a way to get them back?

Hi Brandon163,
Please check on the right top corner you will notice a magnifying glass icon which is spotlight.
Click on it and type Audio midi setup which will populate in the list click on it to open.
Once you open it you will get Premiere Pro 7.0 or 8.0 whichever version you have.
Please check this link.
http://support.apple.com/kb/PH5176
Regards,
Vinay

Premiere pro 5.5 stops working when playing a sequence, saving a project or closing,any ideas why?

I can open a project, import files or other projects, but when I want to play the sequence the program stops working and closes. When I try to save the project or close the program I get a "software not responding" message.
I hope someone can help me with this as I cannot work on any projects.
thanks.

Hi john,
thanks for taking the time to help me. I have updated the software and rendered the files and now I am able to play them, but still neither the sequence nor the clip play/show on the corresponding screens, I can only hear the audio file. I also continue having problems when saving the project, the software stops working and I get the "non responding" error from microsoft.
As you suggested, and I have to say I am pretty much a dummy with the codecs and alike, I installed the mediainfo and run one of the files.
This is the info that appears on the screen
I am not getting any error messages from Premiere, so I am kind of stock. If you need other info let me know.
Thanks for your help and patience.
Arantza
Date: Mon, 23 Apr 2012 09:12:15 -0600
From: [email protected]
To: [email protected]
Subject: premiere pro 5.5 stops working when playing a sequence, saving a project or closing,any ideas why?
    Re: premiere pro 5.5 stops working when playing a sequence, saving a project or closing,any ideas why?
    created by John T Smith in Premiere Pro CS5, CS5.5, & CS6 - View the full discussion
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037What is a CODEC... a Primer http://forums.adobe.com/thread/546811What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037.Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing.For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/enFor Mac http://mediainspector.massanti.com/.http://blogs.adobe.com/premiereprotraining/2011/02/red -yellow-and-gree n-render-bars.html.If you have a red line over the timeline after importing a video and before adding any effects... your project is wrong for your video... read above about codecs.Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project.H.264 will NOT work inside an AVI http://forums.adobe.com/thread/854115.More information needed for someone to help... click these links and provided the requested information-http://forums.adobe.com/message/4200840-http://forums.adobe.com/thread/416679.For CS5 and later, the easy way to insure that your video and your project matchSee 2nd post for picture of NEW ITEM process http://forums.adobe.com/thread/872666
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4354727#4354727
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4354727#4354727. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Pro CS5, CS5.5, & CS6 by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Does Premiere pro cs2 support: 1920 x 1080 - 60fps - 32-bit @ 48khz?

I'm having a hard time importing footage with the specs above with Premiere pro cs2. The video is choppy. Audio seems to be synced. Help...

That several version old program has a different forum http://forums.adobe.com/community/premiere/premierepro_previous?view=all
When a MOD moves your message, you need to provide more information - Information FAQ http://forums.adobe.com/message/4200840

TS2289 Audio Track Won't Play

I imported an audio clip yesterday and it worked fine. Today when I opened my project, there was a yellow warning triangle in the top left above the first frame of my movie and the audio track won't play. What should I do?
And where the heck is the "clock buttom"? I wasn't able to follow Apple Support's suggestions because I can't find it.
Mike

I've adjusted my project according to Brian'statement, so I made all audio tracks and video track the same length, but it still doesn't work when I create the flash file. It plays only 1 audio track, whatever language you choose. It plays the audio track that is"active" in the project. This happens only with the flash. If I burn a DVD, then everything works fine... Am I doing something wrong ?

I keep getting this message when I launch PP "Premiere Pro cannot find any capable video play modules"

I keep getting this message when I launch PP "Premiere Pro cannot find any capable video play modules". I've read through a few threads and made the recommended changes but still no luck, it crashes everytime. I have a Mac Pro 2010 with a Nivdia Quadro FX 4800.

Hello and thanks for the response. Yes, I've read that post and many others, I still get the same message when trying to open. I've realized there's no way to get tech support for any of the products I'm using. Is there another place hat can help me with this problem? I really wanted to try PP but looks like I won't be able to.
Thanks

My Premiere Pro CS2 is saying it's installed but will not work at all.

Hello, if anyone could possibly help my Premiere Pro CS2 won't work for my computer even though all of my other CS2 products work perfectly fine. Could some one help? Thank you.

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840

Language Pack for Premiere Pro CS2 or CS3

Hei everybody,
i´m looking for a language pack for Premiere Pro CS2 or CS3.
Cant find anything in the net.
Thanks for help.
Best Regrads
Ad

Ok, thanks.
On an other page, some wrote about a language pack.
First he had to copy the files into the C./ Adobe directory and than he had to activate it on HKEY_local_machine..
BG

I have a pc with windows 7 professional. I use adobe cs6 production suite and all of a sudden premiere pro stopped working. I had installed a program recently and created a system restore point prior to it's installation. I installed Zaxwerks proanimat

I have a pc with windows 7 professional. I use adobe cs6 production suite and all of a sudden premiere pro stopped working. I had installed a program recently and created a system restore point prior to it's installation. I installed Zaxwerks proanimator 5.1. Restored computer back and I now get an error when trying to run any cs6 program it is a configuration error and it says to uninstall and reinstall.Won't uninstall says I have an error 1. What should I do?

clean and then reinstall, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

Premiere Pro Crashing on my first start of the Program

So I purchased my subscription to Premiere Pro today and got everything downloaded with CC and the second I start up Premiere pro I select New Project and then the Program Closes down. I've Unistalled and re-installed, restarted my PC and still no luck and I am running on a PC. I have tried numerous things like Run as Administrator, Updating drivers, Restarting, and nothing. My Media Encoder CC works perfectly fine.
PC Specs:
Operating System: Windows 8 64-Bit
Processor: Intel Core i5-3350P 3.10GHz Quad Core
RAM: 6GB
Hard Drive: 4TB
GPU: NVIDIA GeForce GTX 660
Monitor: ASUS 1920x1080
Thank You!!

ok,
go to c:-program files*86-common-Adobe-SLCache, rename the SL Cache to old SL cache
go to c:-Program Data-Adobe-SLStore and rename the Sl store to old SL Store.
Program Data is a hidden folder so have to change the view option in order to find the folder.
After following these steps run the application as admin.
Thank You
Arjun

Using premiere cs6 and cant see video in source or program monitor only can hear audio

using premiere cs6 and cant see video in source or program monitor only can hear audio

More information needed for someone to help... please click below and provide the requested information
-Information FAQ http://forums.adobe.com/message/4200840
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
For Mac http://mediainspector.massanti.com/

Premiere Pro CC audio corruption issues

Hello Adobe community,
I've been editing happily on Adobe for several years now, and I'm not sure if it's CC, Mavericks updating and/or getting a brand new top-of-the-line 16GB/ram MacBook Pro to edit on, but every time I close and re-open premiere pro CC, the majority of my audio simply disappears -- sometimes it does it in the middle of an edit. The clips are still there, but they no longer have waveforms and don't play back. Sometimes it's most audio clips, sometimes it's ALL audio clips. It's inexplicable. I don't have any plugins installed or effects, it seems arbitrary as to which clips drop out.
There is a temporary and EXTREMELY aggravating fix, which is to match-frame each corrupt audio and then manually re-insert every single corrupt audio clip.
However, once a project gets to a certain point (what point, I still have no idea), the audio is BEYOND saving. I can't match frame and hear anything. I also can't re-link the corrupt file to its original -- the audio will never come back. This is so frustrating I can't stand it. Entire projects have simply become corrupt and it's not even possible to open a back-up successfully (once the audio drops out on one version, it seems to exist across the board across prior versions). I never had any issues when I start and work on projects from my hefty iMac -- it seems to have something to do with being on a MacBook Pro. So when a project gets corrupted, I've even tried immediately opening a clean back up on my iMac, but the audio is STILL corrupted.
I have tried so many fixes for this I'm going insane. It seems to happen most when I'm running off of an external harddrive, though I've tested it with so many different brands, capacities and connections (thunderbolt to FW800 to USB3.0) -- it doesn't seem to make a difference. I've lowered my buffersize to the minimum, have tried mimimizing all of my tracks so no waveforms are visible, i've tried rendering everything, moving scratch disks, pre-transcoding all footage to Pro Res 422 with 48khz audio, everything. I've also filled out bug reports to adobe, which I have no idea if they're ever seen or not. I rely on Premiere for my livlihood and I'm so desperate I'm about to go back to FCP.
Does anyone have any clue what this could be or any way you might be able to help?
Any help would be greatly appreciated.
Matt

All my footage is ProRes 4444 shot on the Alexa. Audio was recorded separately on a mixer, I can't tell you the model for sure but it generates poly track wav files. The wav has 6 separate tracks - five of which are being used. I've got another project, same footage/camera, same mixer/audio files and I haven't had any problems. There aren't near as many edits in that project and only four of the six tracks on the wav were used. They're still there, just no audio.
I'm using a 10 TB lacie big disk via thunderbolt in raid 0. I've had no other issues with the device or either port.
When it fails to playback I get the following error on the events screen:
'A low-level exception occurred in; Adobe Player (Player)'
I also used pluraleyes 3 to sync the project. When it output the xml for premiere it gave me a window that said 'this contains 5.1 audio data and pluraleyes may not handle it properly'. I didn't, in the timeline all the audio tracks were the same, it was the master mix on 6 tracks - no iso's. The wav files in the project widow had the proper tracks when I viewed them in the source monitor. Because the duration of the audio tracks were the same - I cut the iso tracks into the sync sequence I got from pluraleyes and deleted the audio tracks that originally appeared in the sequence. I mention this because as I said, I have another project that I used the same workflow for and haven't had these issues - yet. I also didn't receive the 5.1 message when I came out of pluraleyes.
Initially when I was having playback issues (the audio waveforms vanishing has been constant), I converted the 44.1 mp3 music files to 48 wav's to match the audio from the mixer. This solved the problem temporarily but now I can't get the audio from the mixer and the music to play in the same timeline. The only way I get playback is to take out the music, strip all the effects from the mixer audio and not have more than two tracks of audio simultaneously on the timeline.
Thanks in advance for any help/advice.

Premiere Pro CC: audio and video is out of sync after export

Hi folks! I downloaded trial version of Adobe Premiere Pro CC. Captured gameplay with bandicam in Motion Jpeg Format (as advised) 30 fps and made a 40 minutes lenght clip. But there is an issue: in my project audio is synchronized with video, but when i export - it's lost (and i think to further we watch video, the bigger is the synch gape between audio and video, in increases gradually). I tried various formats, tried to use option "delete rendered files" prior to export, tried "match source" option, tried to choose various drives for exporting - nothing helps.
Help, how to solve this problem?

Handbrake is a free-download program that takes variable-frame-rate footage and converts it to constant frame-rate. VFR to CFR, if you will.
Going back to your reply to my first post, you noted there had been some kind of "hardlimit" to 30fps that you hadn't chosen. I'm guessing that would have made this track CFR, and what you've got instead is VFR. So you might try recording another bit after selecting that setting to hardlimit the frame-rate, and see if it works better through PrPro to export.
Next ... so, you've got a 30fps probably VFR video track, and it appears a WAV file is your audio ... was that produced by the Bandicam program while it was recording your program? Or is it from another source and you pasted it into your sequence?
Neil

Premiere Pro CS4 on Mac: Can't play media anymore

Hi experts,
I'm in huge trouble with my Premiere Pro CS4 (latest version, all updates installed) on the Mac platform:
Until I tried to record an audio track with the built-in microphone, everything worked fine. But since then, Premiere Pro is unsuable . It won't play any media file (video or audio) anymore: whenever I try to start the playback (no matter what media and no matter in which monitor) Premiere just does nothing at all.
The problem exists since Premiere Pro crashed when I tried to record audio with the built in mic. I can reproduce the crash when ever I try to capture audio again: the error message points to line 2329 in the module "CoreAudioHost.cpp" (to be precise: /Ironside/4.0/MediaCore/MediaLayer/AudioSupport/Macke/Mac/../../Src/Mac/CoreAudioHost.cpp -2329)
I reinstalled the application but the problem still exists. And I checked all the settings in the preferences panel -- but they seem to be alright.
I really have no idea what to do. Hopefully, anybody of you has?
Any help would be gladly appreciated.
Thanks
illergeek

Hi Bob,
no, it's not a Beta, it's the full version of PPro as it comes bundled within my Master's Collection of CS4. And I'm not using any 3rd party plugins either.
I don't think that the file is present on our machines, Bob. The file extension ".cpp" seems to me like a reference to the source code file (written in the programming language C++, since this is what "cpp" stands for). I have a programming background, and therefore I think, the error message isn't meant to be useful for the end user (like us) but for the engineers while they're developing.
But today, I could narrow down my problem a bit. The playback is working again: the problems were caused by some messed up audio *output* settings. I think, PPro messed them up when it crashed several times. I reset them all and now the playback works fine again.
However, I still can't record: neither with Soundbooth CS4 nor with PPro. The software won't recognize my *input* settings. The error message I gave in my previous post still occurs as soon as I press the little microphone button in PPro's Audio Mixer. And Soundbooth just does *nothing* at all when I try to record. But every other tool (iMovie, Audacity) works fine with my Mac.
As a workaround, I record my audio with Audacity, import the file to PPro and be up and running. But if somebody of you has faced similar problems, I would appreciate your solutions.
Regards and Thank you
illergeek

Premiere Pro CS2 - Audio track prevents sequence play in program monitor

Similar Messages

Maybe you are looking for