Premiere Pro CS3 exporting issues

Hey everyone,
Been racking my brain lately trying to figure this one out but i've yet to fix the problem.
I'm getting various errors when trying to export a video. These range from and include; the traditional failure to render (with the error coming at various points), video rendering losing a frame, unkonw errors and the infamous "\Src\PPixHandleUtilities.cpp-114" error.
I have been browsing the forums and encountered a suggestion to optimize the speed of rendering based on my memory by going through the edit>preferences>general option.
Specs of my computer: I run a Windows 7 ultimate 32-bit OS, 4GB ram, with an intel core 2 duo processor @ 2.80 GHZ. For a video card i run a Radeon 5830. All drivers for everything are fully updated and current. I am currently using one 500 gb HDD and a 2TB external. In addition to the computers spec i feel it is important to note that i run a dual monitor display with one 26 inch @ 16:9 and one 19 inch @ a 4:3.
As adivised by Hunt in anothe rpost i have taken the liberty of looking into the size of the paging file for all drivers. It is 3327 MB.
Should anybody require more details let me know.
Problems and errors: The errors which i am having are not restricted to certain intervals of the video, they range and can occur at any point throughout the exporting and rendering process. This most commonly will occur within the first 30%.
The video itself is a little more than 12 minutes long and contains footage from two different cameras, each one had provided a different file type (the primary being .MOV and the secondary being .AVI) At first i had believed that the secondary cameras footage could have been the problem (we had never used this camera for filming prior to this) so i ran a conversion on the file types through AVS and transfered them to a .MOV file as well. However, this seems to have not resolved any isseus with errors. Prior to this video i had never had any issues with Premiere Pro and exporting, that being said, i am still fairly new to premiere pro.
I have tried exporting this file in may different ways. The main one, . AVI had no luck and was mainly plagued with the "\Src\PPixHandleUtilities.cpp-114" error with a few unknown errors present just to mix it up a bit. I began trying to export through encoder to find an extension/any settings that could possibly work. The main one which i've been trying is the .MOV extension with the intent of uploading to youtube. settings i use for exporting on that are as follows:
quallity - 100
width - 1280
height - 720
bitrate - 4000
Every piece of video within the footage runs at 29.97 fps (what we try to export at) with the exception of the three clips from the secondary camera which were previously AVI. They run at 30.00. All file types are shot in 1280x720. The one image which is present as a title overlay within the video is also a 1280x720 size.
If anybody has insight towards this issue please let me know, i would be very happy.
Should anybody require any further information give me a shout, i'll do my best to provide it.
-Monkey Business

If anyone has found a solution for this problem, please let me know in this thread:
http://forums.adobe.com/thread/862623

Similar Messages

Premiere Pro CS3 Importing Issues

Hi all,
I'm new to Premiere, and I've been having issues with a project that I am trying to start. I am running Adobe Premiere Pro CS3 on Windows Vista. I want to import a file that was originally a .mkv file. Because Premiere does not use .mkv files, I simply changed the file extension to .avi. The file is about 1.42 GB. But whenever I try to import the file as a .avi, my program freezes and I get a (Not Responding) error on the dialog box at the top of the program. When this happens I am always forced to close the program. Am I experiencing this simply because the files I am attempting to import are too big? Or is it something else?
Also, if it is indeed because the files are too big, how can I get around this problem? I have tried using software such as VirtualDub and SolveigMM Video Splitter to cut the AVI files into smaller parts, but they do not seem to be working. Any help would be greatly appreciated! Thanks a lot!
(By the way, I attached a JPEG file of a snapshot of what happens when I try to import into Premiere.)

This is because you cannot simply rename a file's extension to "look like" a different format. An .mkv is as similar to an .avi as a goat is to an iguana. First, you may want to try something like this.
You can also try opening your MKV in VirtualDub (without renaming it ".avi"), which may work. I have read that recent releases of VirtualDub can handle (more or less) MKV files, but I have no experience with this myself. If this works, you can save it as an AVI from VirtualDub.
As for the AVI format, it is really just a "container." What matters more is the codec with which the AVI is compressed. A good choice is often DV (and here is a good free DV codec if you need one). However, DV only works with videos of certain resolution and framerate, so you may want to convert to an uncompressed AVI or use a codec like Lagarith.
Assuming you are able to find a decent MKV -> AVI converter, could you please post more details on your video, such as its resolution. It would also be helpful to know what format you plan to output your edited video as.

Adobe Premiere Pro CS4 - Export issue.

Hello to the Adobe Community!
Maybe someone here can help me out with some Premiere issues.
I am using Premiere Pro CS4 4.2.1.
I'm on Windows 7 64 (Ultimate N).
My system is:
Intel Core i5CPU [email protected]
3GB RAM
I have updated all Adobe software, and my drivers.
I've had a good look over the forums and I found this article. It's very useful, and hoping it would be my saviour, I went through all the advice given.
Still no luck!
I'm trying to export the media from Premiere to Media Encoder.
My sequence settings are:
1280 x 720
Square pixel aspect ratio
25fps
48000HZ - Stereo
My render settings are:
MPEG2 - DVD
PAL HIGH QUALITY
Everything else is left to the default setting.
When I try to encode via the Media Encoder, it gets to about 1/3rd of the way through and I get a message:
'Encoding Failed
Error compiling movie.
Unknown error.
I have also tried, as per previous posts, to use the Adobe Dynamic Link, both from Premiere out to Encore, and importing in from Premiere when I'm in Encore.
Still no luck! I get an 'encode failed' message when I try to transcode it. I'm pulling out my hair with this one.
Can anyone shed any light on this?
NB: This is my first post on this forum, so apologies if I have missed anything out.
Thanks in advance for any advice,
Em.

Thanks everyone for your help and suggestions - Evan I think you might be right on the memory issue.
I tried one last thing - running Premiere in compatibility mode as an administrator.
Again, it failed after about 7 minutes. It's quite a complicated project, but it's only 14 minutes long.
The strange thing is that although it doesn't seem to render on my work pc, it renders on my home pc, which has similar specs:
CPU: Intel Core i5 760 2.8GHZ 8MB
MEMORY: 4GB (2x2GB) PC12800 DDR3/1600mhz Dual Channel Memory
MOTHERBOARD: Asus P7P55-M Intel P55 Chipset
NVIDIA GeForce GTS 450 1GB
I forgot to say that my work pc, listed above uses an NVIDIA GeForce 8800 GT card.
Do you think that 1GB can really make all the difference?
Sorry if that's a stupid question, I don't have a massive amount of technical knowledge.
Cheers!
Em.

Premiere Pro CS3 - exporting uncompressed AVI renderes black vid - help

I'm putting together a small demo reel (just under 6 minutes) where the image quality is important above all things. I was trying to export an Uncompressed AVI movie, 1920x1080 with 16bit 48Hz audio in Pro CS3 (I don't have access to a later version), which seems to work except the video is being rendered black (the final file is 32 gigs). I tried testing this with a 5 second clip to see if the length or size of the file was causing the problem but it was the same. The reason I am doing this is that I want to do my codec and burn to DVD in another program (AVS) and need to export the video as pristine as possible, It didn't seem to make a difference if I chose "uncompressed AVI" or the "Microsoft AVI" and then made sure the video setting were set to uncompressed. I am sure that the video is alright as I was able to create a "Microsoft AVI" as long as I chose some sort of video compression but then that file is being doubly compressed.
I had heard mention that Premiere Pro (I am new to this package) should be able to export an uncompressed QT file as well but this option seems unavailable to me in the export options.
I tried using the Premiere Encoder to go straight to DVD from Premiere (this is not for Blue Ray by the way - I just wanted to master at HD so taht, in the future, when I do re-edit for Blue Ray I'll already have this material worked out for that resolution) but it generates a single Mpeg2 files that my DVD burner doesn't want to use (it seems to want things to be in the VIDEO_TS/AUDIO_TS directory structure).
Sorry for this layman stuff but any help is much appreciated.
-Michael

Thanks Jim,
I tried None but the images (video) still comes up black. I've tried
looking at the final AVI through Premiere itself and also AVS Media
Player, Editor and a few other programs. The uncompressed audio is
there but the video is rendered black (uncompressed black so the files
are still huge). All I have to do is change the codec to Cinepak or
one of the others that are available and suddenly the images are there
as expected but, unfortunately, the image degradation once this file
has been converted to High Quality DVD is not acceptable for my
purposes.
I'm not sure what other alternatives there are -- is there a way to
load additional codecs into Premiere (such as QT uncompressed) so that
I can give those a shot?
Thanks for your help on this.
-Michael

Premiere Pro CS3 - Scaling Issue 720p

Hello,
I'm working with HDV1080p footage in an HDV720p project. I'm experiencing a flashing edge in my Program window when playing back footage in a sequence. The 1080p footage has been placed in the sequence without any scaling, or "Scale To Frame Size" applied. There is a flashing, jittering edge that appears on the right-hand side of the frame during playback.
The same flashing, jittering block of video on the right edge of the frame also appears in exported video.
Any help fixing this will be greatly appreciated,
Thank-you,
Andrew

hi,
I'm new at using premier pro cs3 ( 3 weeks about )... so I'm no expert.
I'm curious if you know about a program called GSpot, which lets you get information about a source file or exported file...gives a lot of information about the specific nature of the video and audio. If you do a "screen capture" of the GSpot program with your source file, you can upload that screenshot here (should be 450 pixels or less in width to upload here ) and people would know what kind of file you are dealing with.
I have a sample 1080p file that was already converted to a MOV from RAW original, which I loaded into Premiere project of HD 720x480, and it looked good, previewed well (though cropped a lot, it was centered in the project monitor). Then I exported as a Quicktime (using H 264) and although the clip lost a lot of quality it exported OK and looks fair.
You might upload more specifics about what your source is and what you want to export as, and I'm sure people here can help.
Rod

Premiere Pro CC Export issue on still images

Premiere CC latest version 2014.
Hey guys. So I've recently had some serious problems on a couple of projects where I have exported videos with stills (jpegs) in the timeline, and they flicker or have dark lines running through when exported to h264 files - but only on the still images. It is not interlace issues. The exports have odd dark lines flickering over that portion of the export file. The video elements in the timeline seem to export fine though. It has happened on both my main desktop PC on a large complicated edit and on my VAIO laptop on another separate projects that was a very simple talking head with JPEG overlays. So I don't think its an isolated issue in a particular project or on a particular graphics card. Is this a bug in Premiere?
This is a serious problem that got me into trouble this evening on a quick turn around job and I couldn't export a decent version of my timeline.
Any suggestions?

Hi James,
This is a serious problem that got me into trouble this evening on a quick turn around job and I couldn't export a decent version of my timeline.
Any suggestions?
Sorry about that. Did you apply any effects? If so, what were they and with which combinations? Did you apply effects to clips or to adjustment layers?
Thanks,
Kevin

Premiere Pro CS3 - export to Avi

I have been using Topaz enhance to upsize my SD footage to 1280 x 720 HD with some good results, I have to encode the footage to H264 (MPG4)
The process is very time consuming.
Is it poss to render the 1280 x 720 file to an Avi of the same output size? - Premiere changes it back to 720 x 576 when I export to Avi
The other question - How many times can you encode an Mp4 file as I have to bring the Topaz HD files back into the project?
The Mp4 files do not play well on my system 3.4ghz 3gb ram when using various players but play ok when exported into a new Premiere Cs3 project.
An Avi would speed up the render process.
Hope someone can help

Where would I find Avi uncompressed or Lagarith within premiere? I have plenty of Hard drive space for large files
I can,t afford to keep waiting while the project re -encodes to an Mp4 10secs takes about an hour
Will an uncompressed Avi still keep the quality Topaz has produced, Encoding to H264 seems to retain it but takes ages.

Premiere Pro CS3 export to FLV Youtube settings

I want to export from Premiere to FLV for Youtube. My understanding is that this is the best way to get high quality outcomes for Youtube. I have used Premiere a little but need help with the settings eg. Which preset do I use when starting a new file? (DV-2p, DV NTSC, DV PAL, etc) I also need settings for exporting the file with the media encoder. I know this is a lot to ask. I would be grateful for any help.
Rich Gilman

Hi,
presets for starting a new file
You mean a new project in Premiere ? If so, match what the source material is....whatever your source is ( video characteristics ) is the settings for new project....make them the same....
Use the GSpot program or something like that to determine the source video characteristics
YouTube converts stuff to MP4 .....it will convert anything you upload to YouTube to MP4....and handles a lot of different formats that are uploaded OK.
It doesn't have to be FLV ( which is a Flash format ) It can be MP4 that you upload.
Once you figure out what your source video is and start a new project, that may determine the best format ( codec ) to use for exporting....
So, once you have that info and have got that far in your work flow....it would then be easier to help you with export settings..
Rod

Premiere Pro CS6 Export issues

We are using CS6.1 on Dell platforms and Mac's in the studio and we produce long form commercials. We are missing all of our deadlines becasue we cannot export these 29 minute films. We also have issues with exporting to SpeedGrade and simply gave up. I have four TV shows that I cannot get off these computers. Further the dynamic linking literally sucks. sometimes you can open a JPEG in Photoshop and save it with the changes appearing in CS6 and sometimes not. We cannot export through Project Manger or export as an AVI, or any other codec for that matter. We never had any problems with CS5.
Right now I am having to transfer to a deck to get the files ready for broadcast check. It seems that when you only have few seconds of video it works fine, but it goes to hell in a hand basket after that.
Does anyone have a workaround or can you tell us what we are doing wrong?
Right now I am putting all the new shows on AVID for editing, at least that works.
Bob Killen
BKFA Productions

Hi Bob,
How are you exporting the sequence? Give us some details so we can help you out.
Here are the guidelines for getting your details.

Premiere Pro CS3 Export problem. help please.

is it normal when i try to export in H.264 Blu-Ray format, there's 3 files created when finished?
Sequence 01.m4v
Sequence 01.m4v.xmpses
and Sequence 01.wav.
and when i try to open m4v there's no sound?
maybe its really for Blu-Ray.
there's really no way to export it with good image quality for youtube and ESPECIALLY, best sound quality ( at least PCM 16-bit 48-Khz or higher )
im REALLY surprise it can't export in AVI.

Welcome to the forum.
In your Export setting, go to Multiplex Settings, and chose anything except "None." Then, you will get a multiplexed file, with both the Audio & Video Streams in one file. See this article for more detail: http://forums.adobe.com/message/3557964#3557964
Good luck,
Hunt

Premiere Pro CS3-CONSTANT Memory issues when editing/rendering/exporting

Alright, as said in the title I am currently using Adobe Premiere Pro CS3, and my issues are horrendous
No matter what, within 10 minutes of editing, Premiere will warn and then crash because of memory issues, starting with the message:
"Adobe Premiere Pro is running very low on system memory; please save your project and proceed with caution"
Also, whenever I try to export this project, within 800 frames of a 7000 frame project (currently), it displays the message:
"Error Compiling Movie", and then the previous message above if that hasn't already happened before
And eventually, the program will crash out of nowhere, with random windows errors
Here's my specs:
Intel i7 920 Processor
6 GB DDR3 RAM
Nvidia 480 GTX
750 watt power supply
24" Dell Ultrasharp Monitor
Now, I've noticed that whenever Premiere is getting close to crashing, my RAM gets up to around 4.7 GB being used, and then it crashes.
I have already gone into Edit-Preferences and tried switching from Performance to Memory; that hasn't fixed anything
I noticed that when I was just running my video over and over again, it stayed stable at 4 GB or so, so maybe its a rendering issue?
I have already tried lowering my number of processes running at any given time, including my antivirus program (Kaspersky) and even explorer, but it still crashes no matter what.
========================================================================================== ========
This is a SERIOUS issue for me, as even with all the normal crashes I could finish the video; but now I cannot even export my video at ALL without it crashing, and I have a plenty strong-enough computer to handle this, so what gives?
Please help

Ok, well this has been getting me nowhere
I tried importing (both my CTRL-X method, and literally importing the project), and now the program won't even RENDER the footage, it just errors out at 800 frames (just like exporting)
What is going on???
I used to use Premiere Pro 2.0 all the time, on a separate computer, but I have 6 GB of RAM, is this really impossible???
EDIT:
And now, even after finally getting it to render (by saving after rendering before what crashed, and then starting it up and rendering again), all my footage looks like crap XP

Big problems exporting from Premiere Pro CS3

Hey all.
Would be massively grateful if anyone here could help me out. I'm in the process of trying to export a 23 and a half minute project from Premiere Pro CS3. I've tried exporting to different formats, (Quicktime, MPEG2, etc..) but keep arriving at the same conclusion. The process will freeze midway through, and I'm greeted by the following error messages:
"premiere pro debug event
premiere pro has encountered an error
[..\..\Src\PPixHandleUtilities.cpp-114]"
When I close that, another window pops up saying;
"export error
application failed to return a video frame.
cancelling the operation."
I'm not really sure where to go from here. Previously during the process of editing this project, I would occasionally get a message telling me that premiere pro was "running low on system memory". Fearing this to be the problem I was having while exporting, I attempted to export an extremely low quality version of the project, but arrived at the same conclusion. I also wondered if there was a corrupt frame or clip somewhere that was causing the issue, so I overlayed one whole transparent clip over the whole sequence and tried to export, but again, the same result.
I now have to put all my faith in you Adobe Wizards! Please ask me any questions that might help you to arrive at what may be causing the problem, I'll answer them the best I can
Many thanks!
Andy

>13.4GB free
FAR too small !!!
The program itself uses more than that for temporary working files
Also, unless you already have a 2nd hard drive or eSata external, you are below specification
Trying to use only ONE Hard Drive for Video Editing
You are a music conductor, with a baton that you use to point to various parts of the orchestra... this is like Windows pointing to various parts of the hard drive to do Windows housekeeping or to load program segments for various functions
Now, at the same time and with the same hand... while still using the baton to conduct the orchestra... pick up a bow and play a fiddle... this would be doing something with your video file at the same time as all the other work
You as a person cannot do both at the same time with the same hand
A computer is a LITTLE better, in that it can switch from one kind of task to another very quickly... but not quickly enough for EASY video editing
You need AT LEAST two hard drives (separate drives, never a partition http://forums.adobe.com/thread/650708 for more) with Windows (or Mac OS) and software on your boot drive, and video files on a 2nd drive so the boot drive is not slowed down by trying to do everything
Partition = Crash http://forums.adobe.com/thread/957286
I find that the three drives I use work very well for me, for editing AVCHD video... some people use a 4th drive, so video INPUT files are on drive three and all OUTPUT files are on drive four... I only bought a mid-tower case instead of a full tower case (my bad... but had to fit in the space available on my office desk!) so I use the three drives that will fit
Depending on your exact hardware (motherboard brand & model AND USB2 enclosure brand & model AND external hard drive brand & model) AND the type of video file, you may... or may NOT... be able to use an external USB2 hard drive for SD (Standard Definition) video editing
Steve Grisetti in the Premiere Elements forum http://forums.adobe.com/thread/856208 and Jim Simon in the Premiere Pro forum http://forums.adobe.com/thread/856433 use USB externals for editing
A USB3 hard drive connected to a motherboard with USB3 is supposed to be fast enough for video editing (I don't have such, so don't know) but eSata DOES have a fast enough data transfer for video editing... I have not used the eSata Dock below... for reference only, YMMV and all the usual disclaimers
http://www.amazon.com/Thermaltake-BlacX-eSATA-Docking-Station/dp/B001A4HAFS/ref=cm_cmu_pg_ t

Adobe Premiere Pro CS3 is exporting in the wrong size

I want to export my clip I've made in Adobe Premiere Pro CS3 while choosing the option "HDV 720p24" (I've also tried 25, 30 and a few others).
It says in Video Settings before I even start to work on my clip:
"Frame Size: 1280h 720v"
Which is EXACTLY what I want.
However, whenever I choose to export my clip, it ends up being 720 x 480. That's not even 16:9/Widescreen.
I've tried entering the settings when choosing the export options, but the preset 720 x 480 can't be change.
Why is this? Is it impossible to expert a clip to be in 1280 x 720 or any other custom pixelsize I want?
Best regards, Izzy.

Hi everyone,
I apologize for digging up an old thread, but I figured that I'm experiencing this exact problem and have no idea how to work around it I might as well post in an already started topic.
I'm trying to export 1280 x 720 video to that same resolution, but Premiere Pro will not let me choose anything other than 720 x 480 for the size when I try to export through File > Export > Media. I have attempted to use multiple media formats but have had no results for what I need. If it really help, I've posted a couple of screenshots showing my current project settings, but this is just one of a few different formatting attempts which have all turned out the same:
http://www.derektoigo.com/assets/screenshots/premiereexport1.png
http://www.derektoigo.com/assets/screenshots/premiereexport2.png
Hopefully those will be enough to give you a detailed view of exactly what the problem is.
Any help with how to work around this would be greatly appreciated. Thanks to all.

Premiere Pro CS3 crashing on export

I have been using Premiere Pro CS3 for a while and I assure you I have NEVER touched any export settings, but now it is suddenly crashing on export.
There is no error message or anything, the program just turns off.
A friend suggested I change the settings to uncompressed.
The program was set to "Microsoft AVI" by default, so I changed it to "Uncompressed Microsoft AVI". Now it exports without crashing, but if I play the video in Quicktime, there is no video or sound, and if I play it in media player, there is sound, but no video.
What's going on here?

A link with many ideas about computer setup http://forums.adobe.com/thread/436215?tstart=0
Read Harm on drive setup http://forums.adobe.com/thread/662972?tstart=0
Read Hunt on Partitions http://forums.adobe.com/thread/650708?tstart=0
Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link

Premiere Pro CS3: bad video quality when exporting for YouTube

Hi!
I'm a newbie to this forum and yes, I've looked for an answer before posting. I'm also pretty new to Premiere Pro and I hope that the problem I'm having is more my fault than Premiere's (it most likely is.)
I have project, a little YouTube-Video. But whenever I export it, the quality is really poor. I've also tried rendering it with Windows Movie maker and, strangely enough, the quality is much better and closer to the original file. My big question is: what am I doing wrong?
Here are some additional info:
Adobe Premiere Pro CS3
Windows 7 Professional, 32 Bit (PC)
The movie file was shot with a Sony DSC-W170 and is an .mpg file
Video:
640x480
10418kBit/s (total: 10483 kBit/s)
30fps
Audio:
64kBit/s
Mono
32kHZ
Project settings: DV-Pal
Standard-PAL-Video (4:3 Interlaced).
48 kHz (16 Bit) Audio
I used the Adobe Media Encoder for the export, H.264/YouTube. I've also tried several other settings, but I never get as good a result as with the Windows Movie maker. Can anyone please tell me how I can fix this? (Maybe the quality of the video already suffers when I import the files into Premiere Pro? The video in the source and the cutting window is very blurry.)
Here you can see for yourself what it looks like:
File rendered with Adobe Premiere CS3: http://www.youtube.com/watch?v=LTAyx6O27Dg
File rendered with Windows Movie Maker: http://www.youtube.com/watch?v=AVeoUOfM_uo&feature=youtu.be
I hope somebody can help me. If you need additional info which I haven't provided, ask away. Thank you so much in advance for your replies!

YT is set to privet.
Keep project settings and export settings same as camera.
Try H.264 (mp4) for export instead.

Premiere Pro CS3 exporting issues

Similar Messages

Maybe you are looking for