Premiere Pro CS3 Major Problem

Alright, before I give you my problem, let me supply you with my pc specs:
Windows XP Home Edition Service Pack 3
Intel(R) Core(TM)2 CPU
6420 @ 2.13GHz
2.0 GB RAM
49/140 GB Hard Drive
Ok now to my problem. Today I finished a 4 minute long video. I used the Adobe Media Encoder to render my files and when it was at about 74% complete, my entire system/computer shut down. This has never happened to me before and I have rendered files of even larger length and size and there has never been any problem. I tried multiple times with multiple different file types and still, it shuts down. There are no special effects, no titles, no anything. Just pure video. The third time I rebooted my system and tried rendering my video, I opened up the task manager and noticed that before the rendering, my CPU Usage was at an average of about 5%. I started the rendering process and that 5% shot all the way up to 100% and stayed that way until my computer shut off. By this point I was out of my mind. I installed spyware removers, installed registry cleaners, defragmented, cleaned up my disc, turned off my virus software, etc etc etc. Still, nothing. Keep in mind, this is NOT an overheating issue. My computer is doing just fine with heat. Finally after about the 10th time I gave up and came here. Any help?

This ARTICLE in the PE Tips & Tricks sub-forum might help you gather some clues.
when it was at about 74% complete, my entire system/computer shut down
This is often a sign of:
1.) System heat issue. SpeedFan can help you monitor this
2.) Power supply issue
3.) MoBo issues
4.) Physical RAM issues
I'd also check the free, defragmented space on your HDD. Rendering/Export creates a lot more files, than what you end up with, as the process is happening.
Good luck,
Hunt

Similar Messages

Premiere Pro CS3 Capture Problem with Audio

Setup:
Premiere Pro 3.2.0
Video Capture Device: Blackmagic Design Intensity Pro capture card
Audio Capture Device: HT Omega Claro Plus XP
OS: Windows 7 Ultimate 64-Bit
I am able to capture video with Premiere with no issues. However, the audio does not get captured even though it is set to capture both audio and video. I am configured for ASIO capture and playback. Strange thing is that I can load Adobe Soundbooth and it will capture the audio just fine (from the same input stream as I'm trying to do with Premiere). What gives? I'm almost out of options.
From what I can see, when I hit F5 and go into capture mode, Premiere seems to insist that it must capture audio from the blackmagic design audio ports, and even though I have the audio explicitly setup for the Claro in audio hardware, if I go into the capture settings, it still is set on "Blackmagic Capture" as the capture format, and when I go to settings, I can pick the audio channels to capture, however.... I don't want to capture with the blackmagic for audio. The capture format MUST be "Blackmagic Capture" or else I can't capture the video. It still doesn't make sense though, since I have the audio hardware set for input from the claro ASIO. It shouldn't force Blackmagic audio.
Any ideas? Please help

Some additional information:
Sound card is a Claro Plus XT not XP. Used to typing XP heh
Also, the video capture works with the included blackmagic capture software, as well as freeware solutions like VirtualDub and a Japanese freeware program I use. I'm able to capture video and audio without issue on those. Just don't know why Premiere doesn't do it...

Premiere Pro CS3: Many Problems Fixed By Upgrading to Windows 7 Pro 64-bit

I recently installed an SSD drive and Windows 7 Pro 64-bit.
Installing the Adobe Master Collection CS3 went smoothly and only took a few minutes instead of an hour, as in the past.
Premiere, for the first time in the years I've used it, runs STABLE. Not only that, but I can have AfterEffects open at the same time. And Maya 2008. And everything chugs along smoothly.
Case in point tonight: Multicam Editor: Under XP, it worked, but the quality of the video displays would be badly pixellated when video was playing. Under Windows 7, all the four viewports plus the 'online' viewport are sharp and clear and I can see if a camera is slightly out of focus, which was impossible to detect in the past until I watched the finished result.
The audio dropouts everyone complained about for years are a thing of the past.
And here's the biggie: I can render, render, render and keep rendering h.264 files and Premiere keeps ticking. Under XP, 2 to 3 files and that's it. Unknown Error would be the next render result. Under W7-64, I rendered all night and day without shutting or restarting Premiere, and I even had Maya and AE going and was working in them at the same time, something I could never do in XP because it would run out of RAM. And I can do this in 4GB ram! With 8GB, AE renders 3.5X faster, but most other programs remain about the same. I figure in the case of AE, it has EXCLUSIVE use of 4GB ram all to itself on an 8GB system. At any rate, die-hard CS3 users, don't be afraid to upgrade to Windows 7 64-bit.
The only thing you need to do differently is put the Postscript fonts in Adobe's fonts folder, as it won't see the Windows\Fonts-located PS fonts.
My 2008-vintage editing workstation breaths new life, like a major hardware upgrade was done. The "$139 system performance upgrade" I call it. (Sure, adding the Intel 320 SSD helps, but mainly with launching programs--once they're running, the main improvement comes from Windows 7 64-bit.)

Actually, Win8 is really not a tablet OS... it is "essentially" Win7 with a different front end http://forums.adobe.com/thread/1101032
Anything other than a new Win8 "app" runs on the same kind of desktop you see with Win7

Adobe premiere pro cs3 render problem

I have a couple projects just finished one
came too the next one hit render it didint do a thing ?
nothing came up on the screen my computer didint move at all ........very weird
So I opened the project I was going to be working on next.... hit render and it worked fine
Went back to the problem project removed almost everything from the time line except the bare minimum hit render
still nothing at all , didint even attempt it .
yes the red line is full right he way accross
I have P3 dual core 2 GHZ
2 gig ram and windows XP
Any help appreciated !

Create a new project and import the faulty one into it.
PS. Maybe it is time to get a new PC. I didn't know there were still P3's in working order.

Premiere pro cs3 render problems

I'm trying to edit footage that i shot on a sony cybershot digital camera, everything's cool until it renders, rendering messes it up everytime and makes it play all crazy, like i'm re-shooting the exorcist. Is it my project settings? or what can i change in the rendering? or just what am i doing wrong in general? Please help!

Tools to Convert to DV-AVI http://forums.adobe.com/thread/415317?tstart=0
Convert http://premierepro.wikia.com/wiki/FAQ:How_do_I_convert_my_files%3F
Convert your files to DV-AVI Type II with 48KHz 16-bit Audio
To edit a divx file, start at http://www.divx.com/
To edit WMV http://www.microsoft.com/windowsxp/using/moviemaker/getstarted/default.mspx
and http://www.microsoft.com/expression/products/Encoder4_Overview.aspx
I have NOT used the products below, I only forward due to other mentions
$99 http://www.corel.com/servlet/Satellite/us/en/Product/1175714228541#tabview=tab0
$99 http://www.womble.com/products/mvw.html
$90 http://www.magix.com/us/movie-edit-pro/ plus $5 Ship
$80 http://www.nchsoftware.com/prism/index.html
$75 http://www.videoredo.com/en/index.htm
$70 http://www.nchsoftware.com/prism/index.html Converter
$40 http://www.daniusoft.com/dvd-ripper.html#135
$40 http://www.deskshare.com/dmc.aspx Digital Media Converter
$20 http://www.topsoftwareol.com/product/Video/Video_Converter_Standard.html
$00 http://www.dvddecrypter.org.uk/ or http://www.mrbass.org/dvdrip/
$00 http://www.squared5.com/ MPEG Streamclip Converter
$00 http://www.erightsoft.com/SUPER.html Multi-Converter <-- supposed to be very good
$00 http://www.virtualdub.org/ Mpeg to AVI Converter
Convert your files to DV-AVI Type II with 48KHz 16-bit Audio

Premiere Pro CS3 Export problem. help please.

is it normal when i try to export in H.264 Blu-Ray format, there's 3 files created when finished?
Sequence 01.m4v
Sequence 01.m4v.xmpses
and Sequence 01.wav.
and when i try to open m4v there's no sound?
maybe its really for Blu-Ray.
there's really no way to export it with good image quality for youtube and ESPECIALLY, best sound quality ( at least PCM 16-bit 48-Khz or higher )
im REALLY surprise it can't export in AVI.

Welcome to the forum.
In your Export setting, go to Multiplex Settings, and chose anything except "None." Then, you will get a multiplexed file, with both the Audio & Video Streams in one file. See this article for more detail: http://forums.adobe.com/message/3557964#3557964
Good luck,
Hunt

Big problems exporting from Premiere Pro CS3

Hey all.
Would be massively grateful if anyone here could help me out. I'm in the process of trying to export a 23 and a half minute project from Premiere Pro CS3. I've tried exporting to different formats, (Quicktime, MPEG2, etc..) but keep arriving at the same conclusion. The process will freeze midway through, and I'm greeted by the following error messages:
"premiere pro debug event
premiere pro has encountered an error
[..\..\Src\PPixHandleUtilities.cpp-114]"
When I close that, another window pops up saying;
"export error
application failed to return a video frame.
cancelling the operation."
I'm not really sure where to go from here. Previously during the process of editing this project, I would occasionally get a message telling me that premiere pro was "running low on system memory". Fearing this to be the problem I was having while exporting, I attempted to export an extremely low quality version of the project, but arrived at the same conclusion. I also wondered if there was a corrupt frame or clip somewhere that was causing the issue, so I overlayed one whole transparent clip over the whole sequence and tried to export, but again, the same result.
I now have to put all my faith in you Adobe Wizards! Please ask me any questions that might help you to arrive at what may be causing the problem, I'll answer them the best I can
Many thanks!
Andy

>13.4GB free
FAR too small !!!
The program itself uses more than that for temporary working files
Also, unless you already have a 2nd hard drive or eSata external, you are below specification
Trying to use only ONE Hard Drive for Video Editing
You are a music conductor, with a baton that you use to point to various parts of the orchestra... this is like Windows pointing to various parts of the hard drive to do Windows housekeeping or to load program segments for various functions
Now, at the same time and with the same hand... while still using the baton to conduct the orchestra... pick up a bow and play a fiddle... this would be doing something with your video file at the same time as all the other work
You as a person cannot do both at the same time with the same hand
A computer is a LITTLE better, in that it can switch from one kind of task to another very quickly... but not quickly enough for EASY video editing
You need AT LEAST two hard drives (separate drives, never a partition http://forums.adobe.com/thread/650708 for more) with Windows (or Mac OS) and software on your boot drive, and video files on a 2nd drive so the boot drive is not slowed down by trying to do everything
Partition = Crash http://forums.adobe.com/thread/957286
I find that the three drives I use work very well for me, for editing AVCHD video... some people use a 4th drive, so video INPUT files are on drive three and all OUTPUT files are on drive four... I only bought a mid-tower case instead of a full tower case (my bad... but had to fit in the space available on my office desk!) so I use the three drives that will fit
Depending on your exact hardware (motherboard brand & model AND USB2 enclosure brand & model AND external hard drive brand & model) AND the type of video file, you may... or may NOT... be able to use an external USB2 hard drive for SD (Standard Definition) video editing
Steve Grisetti in the Premiere Elements forum http://forums.adobe.com/thread/856208 and Jim Simon in the Premiere Pro forum http://forums.adobe.com/thread/856433 use USB externals for editing
A USB3 hard drive connected to a motherboard with USB3 is supposed to be fast enough for video editing (I don't have such, so don't know) but eSata DOES have a fast enough data transfer for video editing... I have not used the eSata Dock below... for reference only, YMMV and all the usual disclaimers
http://www.amazon.com/Thermaltake-BlacX-eSATA-Docking-Station/dp/B001A4HAFS/ref=cm_cmu_pg_ t

Problemas premiere PRO CS3

en adobe premiere PRO CS3 vamos a editar un video. ruta:
1.- en el cuadro proyecto inicio una secuencia, y con raton derecho importar. fotos, videos... ya tenemos el material escogido en el cuadro de proyecto.
2.- doble clic sobre una de las fotos y aparece en el panel central, donde hay 3 pestañas de ORIGEN (cortar), CONTROL DE EFECTOS (muy bueno) y MEZCLADOR DE AUDIO.
3.- boton derecho sobre la foto..etc = INSERTAR. y directamente va a la barra de LINEA DE TIEMPO O SECUENCIA. es donde montaremos el video.
hasta aqui bien.
el insertar en esta barra, o lo hacemos con boton derecho INSERTAR o lo arrastramos desde el panel central hasta la pista que queremos utilizar.
por defecto hay 3 pistas de video y 3 de audio + una original.
es en estas pistas donde moveremos, juntaremos, aplicaremos transiciones..etc de los fotogramas, tramos de video, archivos de musica. desde esta barra saldra nuestra edicion.
MI PROBLEMA DE AHORA, antes no. al añadir un segundo fotograma desde origen (panel central) a la barra de tiempo. hay un fallo de (software.. hardware..configuracion)???? que hace se duplique la LINEA DE TIEMPO. es horrible.
si quiero mover fotogramas entre las pistas de video, igual!! se vuelve a duplicar la barra de LINEA DE TIEMPO. y lo hace en cascada. no vertical.
es imposible editar, perdon editar si por hacerlo en el panel central. es imposible montar un video, hacer la composicion, ya que muevo los fotogramas y cada vez se añade otra linea de tiempo. que deriva en que aquella barra vertical de "comodin" que nos indica donde insertar el fotograma en cualquiera de las pistas de video. esa barra se corrompe y no es real. es imposible hacer un montaje.
00:00:000 LINEA DE TIEMPO original
00:00:000 LINEA DE TIEMPO duplicada al mover cualquier archivo.
00:00:000 y vuelve a duplicar...
esto deriva en que las pistas de video y audio quedan solapadas en cascada y no hay manera de trabajar.
este problema es de ahora. hace unas semanas he formateado y lo tengo ahora. antes con el premiere PRO CS3 no lo tenia.
he bajado una version de prueba de CREATIVE SUITE 4. el adobe premiere CS4, el mas nuevo. CON EL MISMO ERROR.
edito videos por hobby. de eventos deportivos, familia.. tengo pendiente uno, y me esta cogiendo el toro...
he actualizado la tarjeta grafica, 2 x NVIDIA QUADRO FX 570 actualizada con drivers del 21-10.
quizas al tener 2 podria estar aqui el problema. desde el formateo no se ha conectado ni desconectado ningun cable. la misma pantalla. no he tocado nada de hardware...
puede alguien indicarme como puedo solucionar esto? que puedo hacer? donde esta el fallo?
muchas gracias
saludos
j ferrer

Donde puedo encontrar una buena guía en formato pdf para practicar film look utilizando premiere cs3.
Gracias
Alain Tarbes
Venezuela
MAIL: [email protected] y [email protected]

Problema iniciar Premiere Pro CS3

El problema que tengo es al iniciar Premiere Pro CS3, lo que hace es cargar todo lo necesario y cuando esta por aparecer la pantalla principal del programa, se cierra el programa y no me da ni un error. Vengo trabajando hace rato con el programa y es la primera vez que me sucede esto. Espero ayuda, gracias.

Hola a todos, creo tener la solución a la pantalla azul al iniciar Premiere Pro, el problema parece estar en los drivers de audio de Realtek, los anteriores a la versión 5.10.0.5299 no son compatibles con el nuevo Premiere, yo tengo un portatil Acer Aspire 5670 con un driver versión 5.10.0.5191 que es el original que figura actualmente en la página de Acer y tenía el famoso problema de pantalla azul, descargue de la página de Realtek (www.realtek.com.tw) la última versión de drivers que es la R1.72 en el siguiente enlace:
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=24&Level=4&Co nn=3&DownTypeID=3&GetDown=false
y el problema se soluciono, la versión de driver que tienen en su máquina la pueden ver haciendo click en: inicio/panel de control/sistema/administrador de dispositivos/Dispositivos de sonido, video y juegos/Realtek High Definition Audio/controlador, después de instalar el nuevo driver debería quedar con la versión 5.10.0.5449 o superior y el problema de la pantalla azul solucionado. Espero que tengan suerte.

Premiere Pro CS3 DSLR footage problems

Hi guys, hoping to get some help regarding adobe premiere pro CS3. I am trying to import and compress some DSLR footage which I have captured on a Canon 5D mark 2 camera. However if i drag more than 3 or sometimes 5 minutes of footage on to the timeline the program crashes. Also sometimes my compressed footage has red screens in the playback some lasting a 3 to 4 seconds at start of clip and some a split second. Any ideas and help would be greatly appreciated.

CS3 is not capable of handling dslr footage.
You need to convert.
Might want to look at Neoscene or mpegstreamclip.
http://cineform.com/products/neoscene
http://www.squared5.com/svideo/mpeg-streamclip-win.html

Is Premiere Pro CS3 the right program for me?

Is Premiere Pro CS3 the right program for me?
I am looking for a program that I can:
Import files that were recorded on a DVR (mp4 format)
Take two files placed next to each other on one screen and record a DVD
| | | |
| | | |
| image one | | image two |
| | | |
|______________| |_______________|
Also export the files to other file formats, AVi, MOV

Dave,
Premiere can do a PiP, Picture in Picture (basically, your PiP is one half of the frame), BUT your MP4 source is not the best to edit, especially with PP. If you had DV-AVI files, Captured in PP from a miniDV (tape) vid-cam, it would do a great job, but so would its little brother Premiere Elements, which wants the same source files as PP.
I have not used Womble, that Jeff recommends, but think that it has PiP. Ideally, you want to keep any re-compression down to a minimum, as you are already working with compressed MPEG files, and every additional re-compression WILL cause image degredation. Depending on the CODEC used to create your MP4 files, you have probably lost a lot of info already, and when you go to MPEG-2 (DV CODEC), for DVD, you'll loose even more. About the only way that I see you keeping any quality is if your MP4's are coded for Blu-Ray, and you can find a program with Smart Render, leaving them just as they are, allowing you to edit, then burning to a BD. Lot of "if's" in that.
I'd check out Womble and see if it can do PiP and if it works with MP4. If Jeff recommended it, it's very likely to do that. Juat expect a major quality hit, because you're already compressed the heck out of the image data once, and will have to do it again.
You could convert your MP4's to DV-AVI with a 3rd party program, Import them into PP, or PE, edit and then burn to DVD - with Encore in PP, or directly from PE. See above for comments on quality hit. It's those source files that are the problem. That format is meant for distribution/viewing and not for editing. The effect, however, is easy as can be. There are many tutorials on how to do it with variations, on the Web, but nearly all NLE programs want better source material to start, if any quality is to be maintained.
I'd also post on the Premiere Elements forum, as a lot of people there work with less than ideal source files, and might know of good free, or cheap, conversion programs to use. If you have the CODEC on your machine, DigitalMedia Converter can handle the conversion for you, and do it in batch. It's cheap at ~ US$45, and can batch process, but it cannot improve the quality, or get back the data lost in the first compression - nothing can.
If this is all you want to do, with the above comments on conversion first taken seriously, Premiere Elements will cost about US$100 and do it easily.
Sorry for the bad news,
Hunt

Premiere Pro CS3 Encoding Error

I'm supporting an end user who has been using Premiere Pro CS3 for years to develop and encode videos on their computer.
Recently, they have been experiencing an issue with one particular project they're been attempting to encode. The project is nothing out of the ordinary, various video and audio files, a little bit of text. They're trying to encode the project down to an MPEG2 format for burning to a DVD.
The problem occurs about 20%-30% through the second pass of rendering. Premiere Pro will give an application error, stating that memory referenced cannot be "written". The program then shuts down and the attached Event Viewer log is written. I've done research, but haven't found any items relating to these errors.
The only major change that I know of on his computer was that Adobe After Effects was installed recently. I don't know the version level of After Effects installed.
Premiere is up-to-date. The user demonstrated the ability to encode other projects, both larger and smaller, without issue. All of the files been used as part of the problem project have been used in the past without issue. I'm having the user deconstruct their project to try to identify any layers or files that may be causing the problem. Rather than go through that tedious tasks, I'm hoping someone has an idea of what's going on.

If the project have captured video, this problem can be caused by defective capture. Frames of captured video can have compression problems even not having any apparent defect when they are showed. Since some compressions are inter frames, the compression can have defects during the capture. the funny is, the appearance of those frames can look like normal (since human eye cant see and scan those thousands/millions of pixels one-by-one and detect which one is defective).When you are about to encoding it, or "trancode" it, the change from a defective compressions to a mpg2 DVD for example make the program crash.
If thats the case, u can check in which frame Prem crashes, get the clip to AE and re-export it to a completely diferent format and compression, them replace the Premiere clip by the new one.
o/

Audio in Premiere Pro CS3 appears on one PC, not the other

Hi everyone,
I'm the Network Administrator for a high school and we have a digital media lab here using Adobe Creative Suite 3: Master Collection. All systems here are running Windows XP Professional and are on a Windows domain. All users are standard users, with no administrative rights for obvious security reasons. When I originally did the deployment of the lab by running sysprep on a reference computer and using ghost to deploy the rest of the computers, I noticed a problem with Premiere Pro CS3 after the deployment. In that lab, none of the computers would capture video via firewire and the built in capture function in Adobe Premiere CS3. I believe I have a post about this on these forums that was never resolved. To get around this, I'd capture the footage for students in my office and then transfer it over to their network drives so they could import it into Premiere Pro CS3 and edit the footage.
Recently, the school purchased some HD cameras that record to a built in hard drive or an SDHC card. The idea here was that the .MTS files could be copied from the camera to the computer running Premiere Pro CS3, the media files in .MTS format [at 1280x720] could be converted using KoyoteSoft's Free HD Converter using the settings MPEG2 [a preset], MPG2 as the format, 1280x720 // 16/9, 29.97 FPS, 9000 video bitrate, and 224 audio bitrate, and then the new media files could be imported into Premiere Pro CS3 and edited using the HDV 720p30 preset within Premiere Pro CS3.
This works great...on my office computer.
The problem is that if any student tries to import their footage on a computer in the digital media lab, the converted media files, the exact same ones that just imported into my Premiere Pro CS3 installation on a computer in my office with identical hardware as the computers in the digital media lab, fail to import the audio. I can see the video with no problems in the lab, but no audio layer appears. If I right click the video file and choose Open With> VLC or another media player, the media plays fine with audio. All audio/video codecs that are installed on my machine are also installed on the digital media machines. If I right click Adobe Premiere Pro CS3 from within a student account on those computers and choose Run As and use the local administrator account, Premiere Pro CS3 does the exact same thing, it still can't see the audio. Adobe CS3 is fully up to date on both my office computer and all digital media computers.
Any help fixing this would be greatly appreciated, spring break is coming up here this coming week and I'll be here all week. Hoping to get this resolved during that time so students can edit their own movies. Again, video imports, audio doesn't. No audio layer appears.
Thanks!

See if this helps... To work with AC3 sound files in Premiere CS3, copy the ad2ac3dec.dll file from the Encore CS3 directory into the Premiere directory

Unable to play Cineform avi files in Premiere Pro CS3

I am using Cineform NeoHD version 5.3.2 to convert the MXF files from my Canon XF300 into Cineform AVI.
Then I import these AVI files into Premiere Pro CS3 and here is where the problem begins.
Premiere is unable to play these Cineform files. All I get is about a second of audio, and a still frame of the video. This happens both in the source window, and also on the timeline.
The Cineform AVI files play perfectly fine when using Virtualdub for playback, but Windows media player behave just like Premiere.
Everything worked fine a week ago. Premiere appeared to use something called "ffdshow" to play the Cineform files, and I could edit without any trouble.
A few days ago, when I tried the same, that's when the problems came. Whenever I hit Play button in Premiere, a popup window came up, saying Premiere wanted to use ffdshow, and the options was "never", "no once", "yes once", "yes always".
When everything worked a week ago, I had to use the "yes always" option.
Now, it does not matter which option I use, Premiere will not play the Cineform files.
I did not make any changes to my computer between the day everything was okay, and when the problem appeared.
A Cineform representative suggested "ffdshow" is the troublemaker, so I uninstalled ffdshow and removed any traces of it I could find, but the same problem still exist.
Then I uninstalled Cineform NeoHD
Uninstalled and reinstalled Production Premium CS3 suite
Reinstalled Cineform NeoHD
Still same problem, nothing has changed.
It does not matter if I use 50i or 25p source files.
My system: (Laptop)
Windows Vista ultimate 64-bit
Intel 2,66GHz quad core CPU
4GB ram
Nvidia Geforce 8800M GTX
3x internal 7200rpm harddrives set up with raid-0
Anyone else experiencing this?
Any ideas what might be wrong?

dont know , but this stuff might fix your prob.. overwrite whatever ffdshow screwed up...
cfrepair utility:
http://www.siliconimaging.com/DigitalCinema/SiliconImaging_support.html
cineform codec (neo player)
http://estore.cineform.com/NeoPlayer.aspx
never used the cfrepair thing..but did install neoplayer which gave me the codec to use cs3 with cf raw files ( sample of cf raw at the si 2k site -- avi ext )
ps.... to keep overhead down on my computer I took the resulting cineform "player" out of my startup directory....as it wants to run in background when you install it...no need for that for my purpose of just getting the codec

Error in Premiere Pro CS3.

Whenever I had a problem and i posted it here, i always got helped by you guys, so first of all, i want to thank those who helped me out there, and wanted you to know that i really appreciate that help.
Here is probably my last issue with Premiere Pro CS3.
The problem:
From time to time, i get an error. A message saying: " sorry a serious error has occurred that requires adobe premiere pro to shut down"
It saves the current project, and when i start premiere over, it loads it from there. It usually happens when:
I ' activate ' an effect, example: I change the opacity to 0 ( typing it with the keyboard as a percentage ) and press enter. Right when i press enter, it pops up. ( it happens with any kind of effect, just from time to time, when i ' activate ' it)
When i minimize an audio file by dragging it to the left or the right, it happens when i release the right mouse button. These are just examples. The issue is that when i make a change, this error repeats.
I'd love to hear what the issue may be.
Appreciate any kind of help.

Can you give us the specs. of one of the typical Projects, and their Assets, where you see this happening?
Next, can you give us the specs. of your computer, in as much detail, as is possible?
Can you also list the programs/processes, that load at boot up? A screen-cap, or report from Process Explorer will tell us a lot.
Also, before beginning an editing session, you might want to look into this ARTICLE. If you have Win7, be sure to look down-thread for the link to Black Viper's Web site for tuning that OS.
This ARTICLE might be useful for telling you what is happening with your system and your programs, when you get the error and crash.
Good luck,
Hunt

Premiere Pro CS3 Major Problem

Similar Messages

Maybe you are looking for