Premiere Pro CS4.2.1 and EX1

Hi all, I am trying to edit a project filmed with EX1 Pal 1440 using Premiere Pro CS4.2.1 to edit. I have a brand new fast system, Intel core, i7 920, 2.7gh with Window7 64bit, 12 gig ram, it was working perfectly with SD DV project but as soon I now started a HD project 50i 1440 it freezes, it loads up but as soon as I do any effect or reduce the speed of a clip it freezes. Any ides please?
I even created the project again and again but the same problem!
Thanks
Mitchell

What is the best way t oedit Canon XH-H1 HDV files, Canon 5D MarkII
files and Sony EX1 fimes, do I have to convert them or I can use PP CS4.2.1 as is, do
I realy need a thrid party plug in such as Cineform or another MPE
G plugins?
I am realy getting frustrated with Adobe-PC and regereting why I didn't buy a Mac and Finalcut, is Premiere Pro CS4 capable of editing HD and Full Hd? What is every one else is doing?
Thanks
Mitchell

Similar Messages

  • Premiere Pro CS4 does not import EX1 files longer than 1 hour

    I had to record a long speech and used a Sony XDCAM HD EX1 camera with a 32 Gb and a 16 Gb SXS cards. The speaker paused after 1h 26 min. I stopped the recording and waited until the green light that allows recording the segment came on. Later I recored smaller segments.
    I copied all the recorded files to the PC hard disk ( Intel Quad Core 2.4 Ghz with 3.25 GB RAM with XP Proofessional SP3).
    I used Sony Clip browser to watch the clips and all of them were perfect. Then I opened premiere Pro CS4 4.21 and I wanted to import this 27 GB file. In the media browser appeared only one mp4 file. All the short ones where imported normally but the big one freezed premiere and the only way to close premiere was with the windows task manager.
    I checked again in the Sony XDCAM clip browser version 2.6 and you can see it perfectly. There was a detail, though: in the lower part of the preview window I saw 6 marks. When I checked the file in the disk, I found that the 27 Gb file was separated in 7 parts. Each of them was 3.51 Gb and the last one 2.5 Gb. That means that the file was cut in pieces that were less than 4Gb supposed max file lenght.
    I tried many ways to import and no result. The I used the "export " of the sony clip browser. There is one choice that is "MXF for XDCAM HD". When I chose this item another panel appeared and showed a 1440 X 180 59.94i 25Mbps choice. I took it and after some time it created the 27 Gb file that I could import it normally with 4 audio tracks. But there is a drawback a "media concept" logo appeared to remeber to "buy" the program.
    Anyhow, the question is: How can I import to Premiere CS4 a MP4 file created by a Sony EX1 HD camera whose lenght is more that 1 hour long ?
    Thanks
    Wolfgang

    I think  is the contrary because the clip browser copies all the foleders needed. I got this opinion from another forum that copies into Final Cut:
    "My workflow is to create a hard drive folder for the project, then use Clip Browser to import the clips from the card. I review the clips, labelling them, adding logging notes, setting the status and putting in essence marks as needed (the number of characters available for the essence mark description is fairly limited). I then open FCP, create and save a new project then call up XDCAM Transfer. I select the project folder and it will pull in all the clips. I then filter for OK status, occasionally create subclips then import. The clips come over to the bin, with their names and with the essence marks converted to markers. Obviously there are backups taken - I've not mentioned them."

  • Premiere Pro CS4 Codecs: MOV and MTS

    I am looking for codecs for Mov and MTS file types for Premiere CS4.  Anything I can find on the Adobe site?
    Hendrik
    =========================
    Thread moved by moderator to Premiere Pro CS4 & Earlier

    Also, CS4 has a different forum http://forums.adobe.com/community/premiere/premierepro_previous?view=discussions

  • How to export in avi in premiere pro cs4 on MAC?

    Hi,
    How to export in avi format  in premiere pro cs4 on MAC?
    MAC 10.6.2
    downloaded div x for mac and did not get any option in export settings.
    Regards,
    Vinay

    I have checked the supported file format in premiere pro cs4 for windows and Mac.
    pre pro cs4 does not have that option.
    is there any alternate to this ?
    Regards,
    Vinay

  • Help for adobe premiere pro cs4

    Hi all someone can 'help me with adobe premiere pro cs4? demand and 'the following when I use premiere cs4 after some work I will fill the PC's memory even if the project 'on the external hard drive, how can I free up hard disk principale'qualcuno can' help me when I export with adobe media encoderla encodes part of 80 and although 'the first work I do after riprestinato pC, never starts from scratch. thanks again look your answers Lidia

    Lidia,
    Welcome to the forum.
    I would start by reading this FAQ Entry, on what information to provide, when asking a question in the forum: http://forums.adobe.com/thread/961741?tstart=0
    That information will provide a good starting place for others to begin helping you.
    Good luck, and let us know more please,
    Hunt

  • Premiere pro CS4+media encoder CS4 problem encoding to WMV and MOV

    Hello,
    I am new to CS4. I lurked around the meanders of CS4 help and FAQ. In spite of the large help database I could not find a solution to my issue.
    I edited a little movie from shots I took during holidays. I edited in premiere pro cs4 and it is a bit faster than CS3 <yoohoo>
    However I want to export the movie as NTSC source to high quality download. In the Expot settings,  I wrote a file output of course so it can encode and compile the movie somewhere on my HDD and I did not touch anything in standad NTSC source to high quality download values and tabs. In the end the movie should be around 848 mega.
    I press OK, then Media Encoder pops up on screen. my project comes automatically in Media Encoder which is neat so I just had to click on start Queue but here is my problem...
    I can wait for 4 hours or more, Media Encoder status states Encoding but nothing moves forward. Elapsed time remains at 00:00:00, Estimated Remaining remains blank.
    Although something triggered my attention when I widen Media Encoder Source Name tab. It sounds like my project from Premiere Pro is placed in a temporary folder instead of using the regular save project file folder in ...>adobe>premiere pro>4>sebsofie2010b which strange.
    I try to place a picture of my issue and perhaps it will help everyone.
    This picture was taken about 1 hour and half after I tried to encode the movie for the fifth time.
    The status quotes "Encoding"...
    Thanks in advance for any help

    Hello,
    This is Song to an Illiad. I had to change Email address and password as I am switching provider soon.
    So Ok to bypass the issue at that time, I simply transfered all files to a jumpdrive and re-did the composition at a friend house. Although my problem persist and Thank you for the Wiki link it was helpful. Sherlock free ware discovered several erronous Codec. Do not ask me why, how, when please. I do not toy around with codecs and all I do is update software but I have several software going from Adobe to Autodesk series as well as Nero Light version that came with my Dvd burner.  Should I also mention I play video games when down time permits, as such I updated several time the DirectX software. Beside this, what is it called... Dvix or Xvid, well something like that... prompted me about 2 months ago to update to a newer version which I did. Finally I installed a freeware to export an avi type to another found on Cnet.com a few months ago as the file could be seen in Premiere pro but there were no Audio track seen in premiere while the client gave me his camcorder and I knew there should be an audio track, it was a sort of camcorder that records on a memory sticks which is why the camera was small. It was a canon but nothing more detailed than that. Anyway, I had the camera with no drivers whatsoever and I had a hard time to find the driver for free online which is why I found a freeware or perhaps was it a shareware or a trial (I am not sure), anyway it decoded and re-encoded the movie which it did successfully with lots of image loss quality but it was succesful. I know I deliberatly threw the shareware or trial straight in the garbage once I was done because I do not want this kind of junk on my PC. Perhaps could it be the issue with Media Encoder not able to start?!?!
    Here comes a couple of texts Copy/Past & image to describe what Sherlock found
    Codec Reporting Utility Output Text
    Date and Time: 26-Aug-2010 23:43:54
    System Information
    Operating System  = Unknown Professional (6.00.6002)
    CPU Descriptor    = Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz
    CPU Clock Speed   = 2400 Mhz.
    Total Memory      = 4095 Mb.
    DirectX Version   = 10.0
    WMI Version       = 6002.18005
    ACM Version       = 5.00.0
    Video Codecs
      Adobe DVCPRO 100 Codec
         FileVersion       = 3.0.1095.1
         CompanyName       = Adobe Systems Incorporated
         FileDescription   = Adobe DVCPRO 100 Codec
         InternalName      =
         LegalCopyright    = Copyright (C) 2007
         OriginalFileName  =
         ProductName       = Adobe DVCPRO 100 Codec
         ProductVersion    = 3,0,1095,0
      Adobe DVCPRO 100 Codec
         FileVersion       = 3.0.1095.1
         CompanyName       = Adobe Systems Incorporated
         FileDescription   = Adobe DVCPRO 100 Codec
         InternalName      =
         LegalCopyright    = Copyright (C) 2007
         OriginalFileName  =
         ProductName       = Adobe DVCPRO 100 Codec
         ProductVersion    = 3,0,1095,0
      Adobe DVCPRO 100 Codec
         FileVersion       = 3.0.1095.1
         CompanyName       = Adobe Systems Incorporated
         FileDescription   = Adobe DVCPRO 100 Codec
         InternalName      =
         LegalCopyright    = Copyright (C) 2007
         OriginalFileName  =
         ProductName       = Adobe DVCPRO 100 Codec
         ProductVersion    = 3,0,1095,0
      AVI Decompressor
         FileVersion       = 6.6.6000.16386 (vista_rtm.061101-2205)
         CompanyName       = Microsoft Corporation
         FileDescription   = DirectShow Runtime.
         InternalName      = Quartz.dll
         LegalCopyright    = © Microsoft Corporation. All rights reserved.
         OriginalFileName  = Quartz.dll.mui
         ProductName       = Microsoft® Windows® Operating System
         ProductVersion    = 6.6.6000.16386
      AVI Draw
         FileVersion       = 6.6.6000.16386 (vista_rtm.061101-2205)
         CompanyName       = Microsoft Corporation
         FileDescription   = DirectShow Runtime.
         InternalName      = Quartz.dll
         LegalCopyright    = © Microsoft Corporation. All rights reserved.
         OriginalFileName  = Quartz.dll.mui
         ProductName       = Microsoft® Windows® Operating System
         ProductVersion    = 6.6.6000.16386
      Cinepak Codec by Radius
         FileVersion       = 1.10.0.11
         CompanyName       = Radius Inc.
         FileDescription   = Cinepak® Codec
         InternalName      = iccvid
         LegalCopyright    = Copyright © 1992-1995 Radius Inc., All Rights Reserved
         OriginalFileName  = iccvid.drv.mui
         ProductName       = Cinepak for Windows 32
         ProductVersion    = 1.10.0.0
      DivX 6.9.2 Codec (2 Logical CPUs)
         FileVersion       = 6.9.2.26
         CompanyName       = DivX, Inc.
         FileDescription   = DivX
         InternalName      = DivX
         LegalCopyright    = Copyright © 2000-2009 DivX, Inc. All rights reserved.
         OriginalFileName  = DivX.dll
         ProductName       = DivX®
         ProductVersion    = 6.9.2.26
      DivX 6.9.2 YV12 Decoder
         FileVersion       = 6.9.2.26
         CompanyName       = DivX, Inc.
         FileDescription   = DivX
         InternalName      = DivX
         LegalCopyright    = Copyright © 2000-2009 DivX, Inc. All rights reserved.
         OriginalFileName  = DivX.dll
         ProductName       = DivX®
         ProductVersion    = 6.9.2.26
      DV Splitter
         FileVersion       = 6.6.6000.16386 (vista_rtm.061101-2205)
         CompanyName       = Microsoft Corporation
         FileDescription   = DirectShow Runtime.
         InternalName      = Qdv.dll
         LegalCopyright    = © Microsoft Corporation. All rights reserved.
         OriginalFileName  = Qdv.dll.mui
         ProductName       = Microsoft® Windows® Operating System
         ProductVersion    = 6.6.6000.16386
      DV Video Decoder
         FileVersion       = 6.6.6000.16386 (vista_rtm.061101-2205)
         CompanyName       = Microsoft Corporation
         FileDescription   = DirectShow Runtime.
         InternalName      = Qdv.dll
         LegalCopyright    = © Microsoft Corporation. All rights reserved.
         OriginalFileName  = Qdv.dll.mui
         ProductName       = Microsoft® Windows® Operating System
         ProductVersion    = 6.6.6000.16386
      DV Video Encoder
         FileVersion       = 6.6.6000.16386 (vista_rtm.061101-2205)
         CompanyName       = Microsoft Corporation
         FileDescription   = DirectShow Runtime.
         InternalName      = Qdv.dll
         LegalCopyright    = © Microsoft Corporation. All rights reserved.
         OriginalFileName  = Qdv.dll.mui
         ProductName       = Microsoft® Windows® Operating System
         ProductVersion    = 6.6.6000.16386
      Intel IYUV codec
         FileVersion       = 6.0.6000.16386 (vista_rtm.061101-2205)
         CompanyName       = Microsoft Corporation
         FileDescription   = Intel Indeo(R) Video YUV Codec
         InternalName      = iyuv_32.dll
         LegalCopyright    = Copyright Intel Corporation 1992-1997
         OriginalFileName  = iyuv_32.dll.mui
         ProductName       = Microsoft® Windows® Operating System
         ProductVersion    = 6.0.6000.16386
      Intel IYUV codec
         FileVersion       = 6.0.6000.16386 (vista_rtm.061101-2205)
         CompanyName       = Microsoft Corporation
         FileDescription   = Intel Indeo(R) Video YUV Codec
         InternalName      = iyuv_32.dll
         LegalCopyright    = Copyright Intel Corporation 1992-1997
         OriginalFileName  = iyuv_32.dll.mui
         ProductName       = Microsoft® Windows® Operating System
         ProductVersion    = 6.0.6000.16386
      MainConcept MPEG Video Decoder
         FileVersion       = 1, 0, 0, 65
         CompanyName       = MainConcept AG
         FileDescription   = MPEG Video and Audio Decoder
         InternalName      = MCDSMPEG.AX
         LegalCopyright    = Copyright (C) 2001-2004 MainConcept AG
         OriginalFileName  = MCDSMPEG.AX
         ProductName       = MPEG Decoder
         ProductVersion    = 1, 0, 0, 65
      Microsoft RLE
         FileVersion       = 6.0.6000.16386 (vista_rtm.061101-2205)
         CompanyName       = Microsoft Corporation
         FileDescription   = Microsoft RLE Compressor
         InternalName      = msrle32.dll
         LegalCopyright    = © Microsoft Corporation. All rights reserved.
         OriginalFileName  = msrle32.dll.mui
         ProductName       = Microsoft® Windows® Operating System
         ProductVersion    = 6.0.6000.16386
      Microsoft Video 1
         FileVersion       = 6.0.6000.16386 (vista_rtm.061101-2205)
         CompanyName       = Microsoft Corporation
         FileDescription   = Microsoft Video 1 Compressor
         InternalName      = msvidc32.dll
         LegalCopyright    = © Microsoft Corporation. All rights reserved.
         OriginalFileName  = msvidc32.dll.mui
         ProductName       = Microsoft® Windows® Operating System
         ProductVersion    = 6.0.6000.16386
      MJPEG Compressor
         FileVersion       = 6.6.6000.16386 (vista_rtm.061101-2205)
         CompanyName       = Microsoft Corporation
         FileDescription   = DirectShow Runtime.
         InternalName      = Quartz.dll
         LegalCopyright    = © Microsoft Corporation. All rights reserved.
         OriginalFileName  = Quartz.dll.mui
         ProductName       = Microsoft® Windows® Operating System
         ProductVersion    = 6.6.6000.16386
      MJPEG Decompressor
         FileVersion       = 6.6.6000.16386 (vista_rtm.061101-2205)
         CompanyName       = Microsoft Corporation
         FileDescription   = DirectShow Runtime.
         InternalName      = Quartz.dll
         LegalCopyright    = © Microsoft Corporation. All rights reserved.
         OriginalFileName  = Quartz.dll.mui
         ProductName       = Microsoft® Windows® Operating System
         ProductVersion    = 6.6.6000.16386
      MPEG Video Decoder
         FileVersion       = 6.6.6000.16386 (vista_rtm.061101-2205)
         CompanyName       = Microsoft Corporation
         FileDescription   = DirectShow Runtime.
         InternalName      = Quartz.dll
         LegalCopyright    = © Microsoft Corporation. All rights reserved.
         OriginalFileName  = Quartz.dll.mui
         ProductName       = Microsoft® Windows® Operating System
         ProductVersion    = 6.6.6000.16386
      Mpeg4 Decoder DMO
         FileVersion       = 11.0.6001.7000 (longhorn_rtm.080118-1840)
         CompanyName       = Microsoft Corporation
         FileDescription   = Windows Media MPEG-4 Video Decoder
         InternalName      = mpg4dmod.dll
         LegalCopyright    = © Microsoft Corporation. All rights reserved.
         OriginalFileName  = mpg4dmod.dll
         ProductName       = Microsoft® Windows® Operating System
         ProductVersion    = 11.0.6001.7000
      Mpeg43 Decoder DMO
         FileVersion       = 11.0.6001.7000 (longhorn_rtm.080118-1840)
         CompanyName       = Microsoft Corporation
         FileDescription   = Windows Media MPEG-4 Video Decoder
         InternalName      = mpg4dmod.dll
         LegalCopyright    = © Microsoft Corporation. All rights reserved.
         OriginalFileName  = mpg4dmod.dll
         ProductName       = Microsoft® Windows® Operating System
         ProductVersion    = 11.0.6001.7000
      Mpeg4s Decoder DMO
         FileVersion       = 11.0.6001.7000 (longhorn_rtm.080118-1840)
         CompanyName       = Microsoft Corporation
         FileDescription   = Windows Media MPEG-4 S Video Decoder
         InternalName      = mp4sdmod.dll
         LegalCopyright    = © Microsoft Corporation. All rights reserved.
         OriginalFileName  = mp4sdmod.dll
         ProductName       = Microsoft® Windows® Operating System
         ProductVersion    = 11.0.6001.7000
      MSScreen 9 encoder DMO
         FileVersion       = 11.0.6001.7000 (longhorn_rtm.080118-1840)
         CompanyName       = Microsoft Corporation
         FileDescription   = Windows Media Screen Encoder
         InternalName      = wmvsencd.dll
         LegalCopyright    = © Microsoft Corporation. All rights reserved.
         OriginalFileName  = wmvsencd.dll
         ProductName       = Microsoft® Windows® Operating System
         ProductVersion    = 11.0.6001.7000
      Nero DVD Decoder
         FileVersion       = 4,11,3,7
         CompanyName       = Nero AG
         FileDescription   = MPEG-1/2/4 & AVC video decoder w/ DxVA
    What should I do? Can I just reinstall the codec from my Adobe CS4 Production Suite (Without) creating more issues and problems? It seemed the Wiki hints were helpful to pin point a problem but not always at giving solution.
    Thanks in advance,
    Seb
    P.S: Could Adobe throw a little software to download to ensure all codecs are what they should be like and prompt user to reinstall straight from our Dvds? It would be soo much easier that way.
    Seb

  • I need a definitive answer for using Premiere Pro CS4 to work with .m2ts and .mts files

    I have a Canon Vixia HF20 and a Sony HDR-XR350V.  The Canon gives me .MTS files and the Sony produces .M2TS files.  What do I need to do to be able to work with these files in Premiere Pro?  I've searched and gotten that I'll need to purchase a codec.  But are both file types going to be good with one codec?
    Also, what are the steps to getting started?  Purchase the codec, load the codec...Will there be any other steps to working with the files in Premiere?
    I'm sorry for the basic questions, I'm a photographer!  I've never worked with video before, and this is HARD!
    Thank you for your help,
    Michelle

    Hi, Michelle.
    I'm nowhere near the authority on this stuff that many of the others are here, but I have Premiere Pro CS4 and I work directly with AVCHD .mts files from my Panasonic camera. I simply browse to the directory where the .mts files are located and drag them into the project. I didn't need to purchase any additional codec, this is natively supported in Premiere CS4.
    I can't speak to m2ts files as I don't have any gear that generates them.
    One thing you do need to know, however, and this is important. Whether you're running a Mac or a PC, if you're going to work with high def footage such as AVCHD, you're going to need a fairly high performance computer with sufficient RAM, good performing hard drives and a fast CPU.
    I tried this on a PC that was fine for my recording studio (audio), fine for professional software development, but choked and stuttered working with HD material. That's not a problem with the Adobe software, it's just the nature of the beast. HD is extremely demanding stuff, so you need top flight gear to work with it. I bought a higher performance PC and now it runs just fine.
    Hope this helps,
    Chris

  • Bug list and wish list premiere pro cs4

    Iam realy interesting someone, sometime work with Premiere pro cs4 from Adobe team ? I gues not!! Some bug might not seen only people who not work on premiere !!! 2 russian video editing forum named premiere cs4 most worst of version premiere. Old bugs not fixed on premiere cs3 adobe make premiere cs4 with new most worst bugs and some options was remove(Fast export to frame\movie) What for ????!!!!! Cuting the clip i must press 2 button - what for ? Cut it most usful operation and adobe make 2 button press to cut. And domenation effects then adding to clip, please try add some effect to clip then add someone again. Why new effects adds not to last posotion ?
    And time warp, posterize time work only with neast sequence!!! What for !!!Its make work with premiere faster ????
    ADOBE PLEASE WORK YOUR SELF ON PREMIERE PRO CS4 SOMETIME !!!

    FAQ:How/Where do I report a bug?
    Cheers
    Eddie
    PremiereProPedia   (
    RSS feed)
    - Over 300 frequently answered questions
    - Over 250 free tutorials
    - Maintained by editors like
    you
    Forum FAQ

  • Differences between adobe premiere elements 8 and adobe premiere pro cs4

    I'm planning to download either adobe premiere elements 8 or adobe premiere pro cs4, but first would like to know their differences in regards to features that best suits me.

    I'd recommend posting to the PrE forum, per John's suggestion. The reason for that is you will get more background on PrE there, and few users in the PrPro forum know much about PrE.
    In very general terms, here are my observations:
    1.) PrPro handles everything by hand, while PrE is a "big-button" program, and much is done automatically, or semi-automatically.
    2.) With that hand-work comes great power and PrPro offers so very much more, than does PrE.
    3.) Export options are much broader in PrPro.
    4.) PrE offers a semi-automatic, limited DVD/BD authoring function, while PrPro comes with Encore, a very versatile full-featured authoring program. Little in Encore is done automatically, but one has so much more control over the Project.
    5.) PrPro allows one to edit with Sequences, which can have different types of source footage, one for each Sequence. In PrE, one can only use one type of source footage, or they have to manipulate one, and have the Project set to the other.
    If one wants things simple and easy, PrE is the choice, as it has a lot of Presets and does a lot of work behind the scenes, and is a complete package. If one wants control, and does not mind doing things by hand, and using Encore for authoring, then PrPro will allow that control and provide much more power.
    Good luck,
    Hunt

  • After Effects & Premiere Pro CS4 users: Turn off "Make text and other items larger or smaller" (Win)

    I just made a brief blog post recommending that After Effects CS4 and Premiere Pro CS4 users turn off the "Make text and other items larger or smaller" setting in Windows 7, since it causes some problems.
    Please use this thread to let us know whether this solved a problem for you or whether there are any problems with this solution.

    There isn't really an option to "turn off" the feature. Do you mean to say that it should be set to "Smaller - 100% (default)"?

  • Importing Illustrator and Photoshop files to Premiere Pro CS4 (without rastering)

    Hello,
    I've made some economics graphs in illustrator that i'm importing into premiere.
    Premiere pro cs4 doesn't import illustrator files as layers, just a single image.
    I exported from illustrator to save as a .psd to maintain the layers.
    I then imported the .psd into premiere which created a folder with all the .psd layers.
    I dragged the .psd layers onto the timeline so I could animate them with dissolves, but noticed they became pixelated.
    I rendered the layers and they still looked pixelated, even after export they were pixelated.
    From what I understand, illustrator files become rasterised when you export as .psd.
    Is there any way of maintaining the crisp vector graphics created in illustrator when importing into premiere?
    Can I avoid rastering the files?
    Thank for your help in advance
    Kind Regards
    Ant

    Thanks for your reply and welcome to the forum.
    I wondered why premiere was doing such a bad job of anti-aliasing...it turns out that all the .psd files were imported as square pixels instead of rectangular so I right clicked and selected interpret footage, then selected conform to DV PAL1.45.
    I assumed that as I set up the original Illustrator document as a video document (720x576) it would maintain the aspect ratio.
    Somewhere between exporting to .psd then to premiere the aspect ration somehow changed?
    I've found a great tutorial that appears to have a better workflow than the method I was using, by first creating a template in premiere, which can be exported directly to photoshop, maintaing  the correct aspect ratio. It means i'll have to draw up the graphs in Photoshop now instead of Illustrator.
    http://www.youtube.com/watch?v=s8HUOAJomao&playnext=2&playnext_from=PL

  • Premiere Pro CS4 and Adobe Media Encoder Problems

    I am using Adobe Premiere Pro CS4 on a Mac running 10.6, and I consistently encounter this problem when trying to export a Premiere project using Adobe Media Encoder.
    What does this mean? And has anyone else encountered this problem as well? I really need a fix if there is one, because I really need to be using Premiere. I have reinstalled several times, but to no avail. Help me please!

    Jim, thanks for testing.
    My concerns are about a)distribution and general b)compatibility.
    a) When videos are distributed most of the users will probably try to open the files with Windows Media Player. So it is not a good start to have fresh exported h.264 videos which won't run fine with the 'main' player on windows
    b) I am wondering if the Problems with Windows Media Player may also be a sign of a general compatibility issue of the h.264 video itself
    At least in case b) Adobe would have to look into this.
    Here is another test video:
    http://www.tsxn.com/storage/transfer/Serenity.zip
    Thank you
    Chris

  • Premiere Pro CS4 and Canon 600d problems

    Hello,
    Recently I've been having a few recourring problems when trying to edit footage I captured on my Canon 600D on Adobe Premiere Pro CS4.
    The footage shot on the Canon is 1920x1080 at 24fps, when I create a setup preset for these settings in Premiere the clips appear to import absolutely fine. The setup Ive created is shown in the screenshot below.
    The problems start when I place the clip on the sequence and render it, once the clip renders the playback in the program/timeline preview window goes all weird and doesn't play the clip properly. Shown in the screenshot below.
    First of all I thought this might just be a playback error but when I try to export it as a video file it says error and closes down. This is extremely irratating so i wondered if anyone would be able to offer me a soloution. I have a feeling it may be my setup preset but if so would someone be able to tell me the correct way to set it up for a canon 600d camera because whenever I try a preset found within premiere it exports the video at 720 resolution and very low quality.
    Thanks very much for whoever replies, I appreciate it very much
    Mike

    Ahhh okay that sucks, is there anyway to convert the footage that I already have without drastically reducing the quality as I want my film to be the best quality that is possible?

  • Premiere Pro CS4 users: Turn off "Make text and other items larger or smaller" in Windows 7

    I just made a brief blog post recommending that After Effects CS4 and Premiere Pro CS4 users turn off  the "Make text and other items larger or smaller" setting in Windows 7,  since it causes some problems.

    There isn't really an option to "turn off" the feature. Do you mean to say that it should be set to "Smaller - 100% (default)"?

  • Where can I download and install Adobe Premiere Pro CS4

    Hi
    I would like to know where can I download and install Adobe Premiere Pro CS4. Would you send me the link install imm please??
    Thanks

    Check this link , it may help
    http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html
    Please do read the instruction properly , do avoid the error "Access Denied"

Maybe you are looking for

  • Best way to automatically archive IMAP email locally?

    This has probably been asked a million times, but the solution eludes me... I've recently switched one of my email accounts from POP to IMAP. Unfortunately, the email provider is VERY stingy with it's mailbox quotas, limiting me to something like 25M

  • How to authorize my iMac for those purchased apps?

    When I try to sync my iPad apps to my new iMac, it prompted me to authorise my computer before it allows syncing... nevertheless, i'm unable to find that function / option at the app store as per its instruction. Anyone able to help? Thanks!

  • Help ! My iTunes library has deletet 3/4 of my songs !!!

    It just suddenly happend. I heard on a CD (thatwas copy controlled) and I had the iTunes opend. Suddenly iTunes shuts down and when I click on the desktop icon, it starts "looking for files". When iTunes finally apairs on the screen 2/3 of the songs

  • Viewing photo in iPhoto and it jumps to another photo

    I am unable to select and view a specific photo. When selecting a photo to view in "Library", the selected photo briefly appears and then another random photo replaces it.

  • Upgrading Soalris8 release 02/02 to Solaris 8 02/04

    Transition of Solaris 8 02/02 from Sunfire V480 to V490. The server is currently on Hardware : V480 Operating system : Solaris 8 Release 02/02 Kernel version: SunOS 5.8 Generic_117350-24 The minimum requirement for V490 is Solaris 8 02/04. The Upgrad