Premiere Pro CS4 4.2.1 Halts rendering whatever I ask!

Hi there.
Finally I decided to post this.
I have been tracking in internet this situation for months... since PPro CS4 got out, I have been testing and working with it. However, I cannot say I prefer CS4 to other opponents (even one  or two Linux apps oddly).  The thing is when an app makes us spectate, we should have results! I cannot go back to previous releases of PPro because I need that queue in AME. So, let me beggin to explain the error:
The application (Premiere Pro CS4 or Adobe Media Encoder [AME]) halts forever when rendering video (a code loop? while "something"="some thing" then do "render frame again"?). So, happening the error in two aplications that use a bunch of files, I must say it is something used by booth like, my guess, PProHeadless. Moreover, the video it might have a filter or not, an opacity key, might be in a diferent format and created within adobe realm, or even outside like Fusion or Combustion, it can stop. And I say can because I am making tests these holy days to reach a conclusion: it's random. It might ocour in frame 150, or in 20 000, with some kind of format video or a filter or everything "as nature as" a PPro captured avi.
Graphics? Updated as today means. Windows? Up to date also! Adobe Premiere Pro? same thing as you already noticed.
This halt is documented by a png file atached to this post. With taskmanager also. That halt is typical. I am in windows 7 64bits, but also have winxp 64bits that produces the same error. The program can only be terminated by process kill and that sort of things.
As I have searched thoughout the internet, I have only seen a post in creative cows that appears similar to this. No luke for a solution yet. When update 4.2.0 came and I had an enormouse reliefe, thiinking it would "heal" the program... no good. I have not been able to respect some deadlines with clients. I will shift if necessary! At least the minimum would be an error ex spit by the program... nothing never came out. I'm blind and adobe might be also. All programs I've try to develop had error mannagement. CS4 release was something apparatuouse but could had wait for a 4.1.0 update in Premiere for instance...  I am really tempted for a mac! At least I know what should I buy to make a program run in there... just a mac!
As I see, no software seems to be the problem. It's a fresh install of windows 7 and PPro CS4. Nothing else installed in the system but flash, vlc, acrobat reader MSN live, calim av, proDVD mercalli
Hardware bug or incopatability?
So... my specs if this helps:
Processor:     AMD Athlon(tm) 64 Processor 3500+ 2.21 GHz
Ram:             5,00 GB 667Mhz
OS:               Windows 7 Ultimate 64-bit Operating System
Graphic board: NVIDIA GeForce 7300 LE
MB:               Asus M2N-E with Serial 3Gb/s RAID
Disks:            1 SATA for OS.     SATA Disks for footage and project storage 7000 rotations all I think
I believe everything is Adobe PPro supported... so... where the hell is the problem?
Thanks in advance!

OK
I have been these days arround this issue. Done many troubleshooting... trying to understand problems. Here is what I got:
Getting the hauppauge board off the PC seems to have stopped the "halt" of the encoders and renderings in Premiere and AME. Hope it won't happen again, but, It's kind an exclusion game... What was diferent from the setups I have seen in many forums and posts was this ancient board. Adobe shoulde analyse this one against Premiere CS4 and AME: Hauppauge WinTV-Go bt848 conexant board (or it's a lost of time... as it's not supported anymore in Windows, but is in Linux :] ).
As for the playback... a fine tune for performance options of my graphic board was able to reduce the jerkiness of video... so I had the idea to also overclock both processor and graphics. The result is this:
Before: Processing of video with the timeline in view (default workspace) was allways 100%, skipping so many frames that even entire clips coundln't send a sigle frame. Where only the output frame (ç shortcut) playback was almost aceptable, with processing at 100% and some times going leaving a tiny space for other things to process.... The fine tune of graphics board, was able to get in default workspace the insertion of may more frames in there, and with ç shortcut - output full mode, it was 95-100 spiking frequently between them.
Now: Default workspace: 80% processing... Output frame: 60-70% My pc is now in test to seach for the optimal (aceptable) overclock parameters. And it seems I can overclock even more (not in graphics but the processor).
This is good and aceptable for the computer setup...
However, to everyone reading this, please be very carfull at how you overclock. Be shure you read everything you can find (from reliable sources - your hardware suppliers, as for the processor, the mother board, the graphic board... etc..). If you mess something, better you have the money to replace :].
Thanks for everyting

Similar Messages

  • Premiere Pro CS4 over remote desktop does not play sequence

    Hi all,
    I have been researching this issue over the internet but I have found absolutely no references to it:
    I am running Premiere Pro CS4 on my high-resource PC but would like to work from a different room so I am remoting form my laptop to my "good" PC.
    The system lets me do everything I could normally do when working directly on the main PC with the exception of playing back my edited files (before rendering). This is an obvious handicap since I can not watch my edited sequence and am, therefore, working in the blind. I am able to step through it frame by frame, but when I click the play button, it changes to a pause symbol (as usual) but nothing is shown in the video window. This does not just happen when previewing my edited sequence but also when previewing any imported resource.
    Essentially, Premiere Pro CS4 is not playing any video content over a Remote Desktop.
    Other normal playback software (such as VLC, Windows Media Player etc...) works though, so it is not an issue of no video playback at all. This just happens when I'm using Premiere Pro.
    Any suggestions as to what this may be? Any help will be greatly appreciated!

    I was able to edit a full 1080p HD video in Premiere Pro CS5 remotely using HPs RGS (Remote Graphics Software).  I had a Workstation at work with Premiere Pro installed on it and all the source footage on it.  I was then able to log on remotely from home with my old weak-sauce desktop and successfully edit and play back the HD footage remotely.  You just do a google search for HP RGS or go to this link. http://h20331.www2.hp.com/hpsub/cache/286504-0-0-225-121.html
    There is a free trial available too. I don't know why there is not more information about RGS on the web, but it seems to me to be the only solution to work on Premiere or After Effects remotely.
    I hope this helps

  • Adobe Premiere Pro CS4 4.0.1

    An update to Adobe Premiere Pro CS4 will be available via Adobe Update Manager shortly. The file will also be available for download tomorrow (November 20) on Adobe.com, as will the readme (at http://www.adobe.com/support/documentation/en/premierepro/releasenotes.html). In the meantime, here is the text of the readme.
    We're really excited about this update, especially considering we released CS4 just one month ago. To force an update, choose help --> find updates from any Adobe application. The AME update that releases with this update is required as well.
    Important note: if you are using the Elemental Technologies RapiHD plug-in, you must update to the latest version in order to use Adobe Premiere Pro CS4 4.0.1. You can update the plug-in by visiting the Elemental Technologies web page: http://www.rapihd.com/?q=node/129
    New in this release
    - OMF export
    - Final Cut Pro import
    - Edit in Audition (Windows only)
    - Surcode support
    - AAF import and export
    - High quality motion
    - Third-party support
    Notable fixes
    - Attempting to trim locked tracks results in a crash (#1888355)
    - Crash on Win and error on Mac when using Numpad-Asterisk keys to generate marker when
    playing in Program Pane when Effect Controls pane is closed (#1890626)
    - Crash when the Metadata panel is brought into focus when a DVCPro HD clip is selected
    (#1884633)
    - When a filter/search is applied in the Metadata Panel and then a different asset is selected, the
    filter does not update (#1876954)
    - Custom schema causes Adobe Premiere Pro to crash performing many basic operations,
    starting with New Project (#1888938)
    - Render of transition in imported EDL-based sequence fails; on Mac, causes application to hang
    indefinitely, user must be force-quit application (#1873434)
    - After ASND is saved, an effect is always ON if it turns OFF while playing (#1864978)
    - Crash when attempting to load a project that contains a composition if headless Adobe
    Premiere Pro is serving Adobe After Effects (#1871578)
    - Exporting video as MPEG 4 will create a video file that imports at the incorrect length
    (#1851063)
    - Trimming both ends of a clip, then moving the clip will cause looped playback to be silent, or
    only playback portions of the clip (#1868409)
    - When exporting a timeline containing cuepoints, deleting a cue point via AME Batch-> Export
    Settings, the cue point is still present in the output file (#1866690)
    - Playing an audio-only file in the source monitor will cause the application to lock up (#1887330)
    - Exporting any MT session as 24bit WAV leads to garbled audio Mac only (#1881684)
    - Adobe Premiere Pro allocates too much memory and reads too much data from disk when
    loading project files on the Mac (#1890579)
    - With camera connected, opening clip from Timeline into Source and selecting File  Debug
    results in a serious error (#1889197)
    - Export to tape is active from DVCPRO HD sequences (#1863718)
    - Application intermittently crashes when exporting a movie (#1868405)
    - Render and Replace of offline clips takes over 20 minutes (#1885273)
    - Application crashes when cancelling Normalize Audio Track dialog (#1887615)
    - When an AVCHD clip is inserted into a DV timeline with Scale to Frame Size applied, rendered
    previews of the clip show artifacts during Timeline playback (#1863988)
    - Using scale to frame size in a timeline lowers output quality and softens detail and sharpness;
    typing in scale attributes manually or using Adobe After Effects produces much better results
    (#1527669)
    - Multiplexed MPEG files exported to HD size and then imported back in to Adobe Premiere Pro
    show up as 601 color space instead of 709 color space and hence the colors of the imported
    files are off (#1852977)

    Other users have reported having trouble with VOB files from DVD recorders.  Properly authored DVDs work.
    Where did you get the VOB files that won't work for you?
    -Jeff

  • Premiere Pro CS4 (Windows 7) will not (Capture or Record) connect with DV Cass Recorder

    For 12 yrs I've Never had a problem w Adobe Prem Pro seeing my Panasonic  AG-DV2000, DV cassette Recorder. Premiere Pro CS4 (with Windows 7 Ultimate) will not connect (Capture or Record)with my DV Cassette Recorder - Panasonic  AG-DV2000. I upgraded my computer to below components & added Windows 7 at same time.  Have had Adobe Prem Pro CS4 since fall with no problems.  I usually have 2 - 5 videos, with 2 - 4 audios, going at same time on my timeline. (These digital videos & audios I shot myself professionally with mini DV cassettes.) Most projects are between 10 to 50 mins on timeline, w transitions or crossfades between video & audios. Firewire attached from computer to Panasonic. No Capture card in new system, not needed, use to watch over an external TV, now watch over a second monitor or in program  monitor.    [Am I just missing a simple setting??]           Computer below & settings:   very up to date.
    motherboard                        ASUS P6T
    CPU                                         i 7    2.67 GHz
    RAM                                       6 GB
    video                                      ATI Radion HD 5700  1 gig Memory  OpenGL 3.2
    Main Drive                            500g  SATA 7200 rpm
    Raid Drive                              1.2 TB  7200 SATA
    Windows 7                            64 Bit Ultimate
    DVD/CD                                  writable Disc Drive
    AVG                                        Antivirus 9.0
    Playback Settings
                    Realtime Playback
    yes                                          Desktop Video Display
    External Device                    DV 25 720X 576i
    Aspect Ratio Conv              Hardware
    yes                                          External Device Audio
                    Export                     External Device                    DV 25 720X 576i
    yes                                          Disable Video output when in background.
    24p Conversion Method      -  Interlaced frame 2:3:3:2
    Preferences          (only things not set at default)
    Audio Output Mapping       --   Premiere Pro WDM Sound (have also tried Audio Out)
    Device Control     DV/HDV Device Cont Options:  NTSC,  Panasonic,  AG-DV2000P,  Auto Detect
                                    (Check Status) Says it is ONLINE
    Media                     Cache files saved to My Raid drive not C drive  (so they will run faster)
                                    Indeterminate Media Timebase:   29.97 fps Non Drop Frame
    Project Settings   Video --  Timecode             Audio -- Audio Samples
    Capture Format  (tried both)  DV & HDV   (all settings checked for during preview & capture)
                    Under DV               says Panasonic is Online, export to tape/it renders/Premiere controls the Panasonic recorder -looks like it's recording, but see no video -                                                 hear the sound. On Playback nothing was recorded? ( And Can't capture from tape to computer)
                    Under HDV            Says Panasonic is Offline, but computer able to control the Panasonic start/stop, but doesn't record or capture tape to computer? 
    [ I think this DV/HDV part is correct......  it's getting very confusing at this point??!! Your help is appreciated Thank YOU ]

    http://www.studio1productions.com/Articles/Firewire-1.htm
    Above article HELPED me -- and is working fine!!
    Was an Easy fix, took less than 2 mins. 
    After a 2 1/2 month ordeal.
    Info from the "forum help group" through adobe.  jk

  • Adobe Media Encoder for Premiere Pro CS4 stops working on the same frame every time...

    I currently have Adobe Premiere Pro CS4 and have never had these issues exporting before. My timeline is less than 3 minutes long, but it does deal with multiple big files. It rendered perfectly and it plays perfectly in the timeline. When I try to export it using Media Encoder, however, it freezes at the same frame every time (which is actually only a few seconds in!) and then crashes, so that I have to force quit. I have tried exporting it as many different codecs and the problem persists... same frame. I tried creating a new project entirely and whipping together a few titles and exporting that to see if it just won't export anything at all. The new project exported just fine, however, which I suppose is good news. But yeah, my work on that other project is very important to me and I reallllly want to export it. Please help!

    Hi Jim! Thank you for your reply. I think you are right -- and that it lies in the audio somehow!
    It turns out that if I choose to only export the video, and uncheck audio, it will export very well and smoothly. That's great news for me!
    However, now I am trying to work out how to get the audio exported without issues. I actually had the idea of just playing the audio in the timeline and recording it via Stereo Mix, but my Windows 7 driver has Stereo Mix disabled, so it's back to square one. Any ideas of what I can do about the corrupted audio not exporting, which works fine when played in the timeline?

  • Vob Import Question in Premiere Pro CS4 4.1

    Hello,
      Prior to posting, I read numerous posts related to importing vob files in Premiere.  None of them seemed to address the particular problem I am experiencing, and I was hoping to find an answer here in the forums.  Here's what I am attempting to accomplish:
    1)  Export the vob files (there are 4 of them) from a commercial movie DVD to hard disk
    2)  Import the vob files into a Premiere Pro CS4 4.1 project
    3)  Build a sequence out of the 4 vob files
    4)  Replace the sound in two very short segments to eliminate profane language so that my children may watch the movie
    5)  Import the sequence into Encore CS4 and burn a standard DVD
    I was successful in all of the above steps 1-5.  So what's the problem?  I noticed, when viewing the output DVD, that at a certain point (only a single point) in the movie, the sound was garbled and the frames got 'wonky' (a technical term I picked up from Deke McClelland).  My first assumption, was that I had messed something up somewhere in my editing process.  When I navigated to the problematic time in my Premiere project, I saw that there was a problem in that at a certain point, the video would flicker, after which the audio would be out of sync with the video and would remain so until the end of the sequence.  If instead, I simply navigated within the sequence to a few seconds past where the problematic frames seemed to be, all would be well (audio and video in sync).  So, this means to me, that at the point where the problematic frames seem to be, Premiere has trouble interpreting them, and from that point on, the sequence is affected.  If the seemingly problematic frames are skipped, then Premiere does not enter its bad state.
    The next troubleshooting step was to start afresh, and see if the problem existed prior to making any edits to the sequence (i.e. steps 1-3 above).  The problem still existed.
    The next troubleshooting step was to see if a media player exhibited the same behavior as Premiere.  So I took the same vobs and viewed them with Windows Media Player 11.  There was no problem viewing the exact same vob in Media Player 11 that essentially is not viewable in Premiere Pro CS4 4.1.  Hmm.
    The next troubleshooting step was to see if an encoding program would exhibit the same behavior as Premiere.  I imported the same vobs into TmpEnc, and when viewing them, no problems were exhibited.
    Although not conclusive, it appears that there is a bug in Premiere Pro CS4 4.1.
    Another problem that I noticed with vobs, is that sometimes, Premiere Pro CS4 4.1 does not recognize the proper frame rate of a standard DVD vob file, e.g. given 5 vobs that comprise a single movie, the first vob is shown as simply a video file (i.e. no audio at all) @ 29.97 fps in the Project panel, but the subsequent 4 vobs are recognized correctly as having both audio and video @ 23.976 fps.  As before, I validated that the apparently problematic vob (from the Premiere Pro CS4 4.1 point of view) renders/plays perfectly fine in other applications (i.e. no audio or video problems).  I attempted to use 'Interpret Footage' to rectify the problem with the vob, and when I type in 23.976 fps, it takes it, but then displays in the Project panel as 23.98 fps.  It didn't fix the problem, but I was wondering if diplaying 23.976 as 23.98 (as opposed to 23.976 which is shown for the non-problematic vobs) is another problem.
    Thanks much for any and all help,
    Matt
    My system specs, if needed:
    OS -   Vista Ultimate SP2, x64, fully updated
    CPU - Xeon e5440 x 2
    RAM - 16 Gb
    Master Collection CS4 with all updates installed

    Welcome to the forum.
    Now, you have several problems, but most are with your choice of equipment and your workflow, not your choice of an NLE.
    I took a wedding video from 1990 on a VCR tape and turned it to digital via a Dazzle hardware unit that plugs into the computer. It gives me vob files with no menus or anything like that
    Few people have ever been able to get a Dazzle to work. This is true, even with the Pinnacle software, that often comes with it. It is an AVID product now, as they bought Pinnacle, and if you can get it to work at all, you are ahead of 99% of all owners. Stop by the Pinnacle fora and type in Dazzle. You will get the idea quickly.
    A far better workflow would be to use a VHS player, hooked to an A-D device, like the Canopus/Grass Valley 110, or their 300. Use the Edius software that comes with it, to Capture DV-AVI Type II files w/ 48KHz 16-bit Audio. There will be zero OOS issues.
    Most other equipment and workflows are kludges and seldom work at any level.
    A good workman does not blame his tools. He might blame his choice of tools, but not the tools. Unfortunately, you chose a piece of hardware that doesn't usually work with the included software, and are blaming a great NLE program, because you are trying to work with horribly bad footage.
    Please do yourself a favor. Donate the Dazzle to Goodwill, and look at the Canopus/Grass Valley 110. The price differential is not that great, and you will keep all of your hair.
    Good luck,
    Hunt
    PS just did 34 VHS tapes via the above suggestions (some LP and some EP), and got many hours of usable footage. Not one glitch. No OOS. Every file edited perfectly in PrPro and I delivered 15 DVD-5's, that the client loved. I paid for a Canopus 300 with just my time on one project.
    PPS, please see my post #5 for a link to an article on VOB files.
    Message was edited by: the_wine_snob Added PPS

  • Premiere Pro CS4 added contrast H.264 preview files

    Hi,
    Any help I can get with this problem would be amazing.
    I recently updated my OS to 10.6 as there were programs I wanted to run not available on 10.5, however this caused other issues with Premiere that I couldn't fix so I just decided to go back to 10.5. With both installs I reformatted the hard-drive then installed the OS. Now that I've reinstalled OSX 10.5 and updated to the most current version, and then installed Premiere Pro CS4 and updated that to the most current version (4.2.1) and also updated the codecs for Premiere, I'm having an issue with my preview/render files in my timeline that I never had before. It appears that now when I render my original H.264 files the preview/render files have added contrast/crushed blacks and blown out highlights.
    Basically I'm editing H.264 footage from a DSLR, and when I open up a project that I was working on before I began this upgrade mess it opens correctly, but if I extend a clip in my timeline to include part of the original clip that was not previously rendered, Premiere renders this clip with what appears to be increased gain and pedestal/increased contrast. I've also tried this in a new project and it still renders with much more contrast than it used to. Whether in a new project or previous project, Premiere seems to decrease pedestal so my blacks are around/below 7.5 IRE and my whites are at/above 100 IRE. it looks really messed up when this occurs in the middle of a clip that was half rendered before and half after the install. Also I'll bet it's not going to help when it comes to color correcting and it looks like I could be losing image data.
    I don't know what has caused this as it was working properly before my attempted upgrade, and I installed Premiere the exact same way as I did the last time I installed it and I'm using the same version. The only hiccup was after the install and upgrade it said media offline on my old project until it asked me to update codecs, once codecs were updated it displayed all footage in my timeline correctly and then I noticed that I could no longer render preview files to the same standard.
    Here are screen shot comparisons of a video from my timeline. These are back to back frames, the top one was rendered before the most recent install, the other rendered after. I have put a YC Waveform chart beside the image. Sorry I think the best way to see it is just to follow the link otherwise it's gonna be too small.
    http://www.flickr.com/photos/86776146@N03/8101475154/sizes/l/in/photostream/
    Also here is a screenshot of the settings I'll describe below.
    http://www.flickr.com/photos/86776146@N03/8101463115/sizes/l/in/photostream/
    Computer:
    Mac OSX 10.5.8
    Intel Core Duo
    Premiere Pro CS4 (4.2.1)
    Project Settings:
    HDV 720p
    29.97 fps
    1280 x 720
    square pixels
    30fps drop-code
    I-Frame Only MPEG  (video codec)
    I've already searched for a solution to this but come up with nothing. I read a bunch of stuff on the increase in gamma that can happen with .mov files but I don't think this applies to my situation as I would have been having that same issue with my previously rendered footage.
    Anything would be really helpful...Thanks
    Message was edited by: Mike542

    Okay so I've been looking into this in depth over the past few days and I haven't come up with a lot. I have noticed that it's not just the render files but also the inspection window where the clip displays in this manner. It looks like the luma range (as seen in YCbCr scope) is being limited between 7.5 and 92 IRE and I think this is maybe a good indicator of the problem. Why this is happening I don't understand. On my clips that were previously rendered in this timeline there is full range from 0 to 100 in the luma from the YCbCr scope. These files were rendered to an external drive from before I reinstalled Premiere, so it's any h.264 files that I am using after reinstall that are having this issue. I have attached another screen capture illustrating this (look at line to right of scope showing full luma range). Also I have some .mts files from another camera and they import with full luma range as well.
    http://www.flickr.com/photos/86776146@N03/8114886495/sizes/l/in/photostream/
    When playing my h.264 files in Quicktime or VLC they look about the same in terms of blown out whites and crushed blacks. Does Premiere rely on Quicktime for its h.264 codec or does it have it's own? Is there a way to force premiere to update its codecs/manually download and replace the h.264 codec?
    I really can't understand what's happening here and I can't do any work when imported clips are this messed up. Can someone please help out on this!!! Super frustrating and seems to constantly happen with Premiere...

  • What is the best way to handle .mod files in premiere pro cs4?

    I recently got a JVC Everio GZ-MG130u and as I'm sure many of you are aware, it saves footage in the .mod format.
    I have googled this and found quite a few different solutions, but I'm just wondering if anything has changed since some of these solutions were posted, or in other words, what is the best way at this current point in time to handle .mod files in premiere pro cs4?
    As far as I know, the best thing to do is convert the .mod to .avi and then import it into premiere so it can be edited.. Is there a better way to do it than this? Also, by doing it this way, will I have separate audio and video tracks?
    Thanks.

    I have just done a bit of reading, here. All of the quotes that follow are from users who have posted in that thread.
    It seems that there isn't one solid answer on this subject. The thread that I linked to was started 2 years ago, and replied to just 4 ago, so it's relatively current.
    I noticed a couple different interesting statements:
    posted by mmontgomery:
    In the case of .MOD, you are actually getting a MPEG-2 file. The way
    video files work is that there is a codec (COmpressor/DECompressor)
    algorithm and a file wrapper (or extension). A JVC .MOD file is a
    MPEG-2 encoded file, with a .MOD extension.
    You're faced with two
    challenges, first the .MOD file type is only recognized and support by a
    few applications. I think we covered some of those already. The
    interesting thing about wrappers and extensions is that they can be
    dealt with in a variety of ways. Sometimes all you need to do to convert
    the video file to a compatible video file is to change the extension.
    In the case of .MOD files that's not enough. The .MOD wrapper apparently
    does a few more things than just bare a unique extension name. It
    requires a slightly more complicated method to convert that file. That
    is why there is supplied software and that certain third party
    applications have .MOD support.
    (posted 2 years ago)
    This seems to indicate that Ann's solution of simply re-naming the extension is not good enough, unless I am mis-interpreting what she meant.
    However, another user said:
    posted by futball8:
    I edit with Adobe Premiere Pro CS3. All I have to do is simply rename
    the .MOD files as .MPG and then import into PP CS3. It takes a small
    amount of time to conform the audio, but no file conversion is
    necessary. It's a pretty slick workflow and I've never encountered any
    problems editing them this way.
    (posted 5 months ago)
    One can only assume that simply re-naming the extension from .mod to .mpg works in some circumstances, and doesn't work in others. I assume it depends largely on the editing software being used. Perhaps there are still issues that futball8 was simply unaware of or never encountered.
    That said, there seems to be a couple of different real solutions to this problem that I have found:
    1. Simply use an editing program that supports .mod file format. While pe7 and pe8 supposedly support the .mod format, the following should be noted:
    posted by macksgarage:
    While Elements 'supports' these files, it is markedly unstable and  frequently crashes while using the files, though the application is otherwise reliable.  The solution I have arrived at is to repair the  container using ffmpeg. (see #3)
    (posted 5 months ago)
    2. Use a file conversion utility of your choice that will covert .mod to .avi, or another desired format. Import the resulting .avi file into premiere pro cs4.
    3. Use FFmpeg. This seems to be the best solution as it does not convert any audio or video:
    posted by macksgarae:
    If you are not familiar with ffmpeg, it may be a bit of a bear to
    learn, but it's not only useful for this, but functions as a video swiss
    army knife useful for splicing, muxing/demuxing, and rendering just
    about any format into just about any other format.
    ffmpeg is an open source project from the linux world, but it has
    been ported and is supported on windows.  Fetch it here and place it somewhere handy
    on your system.
    To rewrite the container into a nice, standards compliant .mpg file
    that doesn't make applications die, WITHOUT rerendering video or audio
    itself, I use this command.
    ffmpeg -i INFILE.MOD  -acodec copy - vcodec copy OUTFILE.mpg
    This not only renames the file, but actually rebuilds the container
    around unmodified video and audio data, yielding a file which works much
    more stably with Adobe applications, and presumably others as well, as
    ffmpeg's open source development goals result in very standards
    compliant files.
    (posted 5 months ago)
    Now, this seems to properly address the issues that can arise from simply renaming .mod to .mpg, as suggested by Ann. So from this point, I assume you can simply import the .mpg into Premiere Pro cs4 (or any other .mpg compliant program) and edit without issue, but it seems like I remember hearing something about Premiere not liking mpegs or something like that, so in that case, maybe it'd be better to skip this and go with option #2. But, it's been awhile since I've touched any NLE, much less premiere pro cs4, so I could be completely wrong and it may have no problems handling mpegs.
    All of the things that I've quoted here came from the same thread, so I don't know how accurate any of this is, but the people that have posted these things seem fairly knowledgeable. If someone reads all of this and can confirm or deny any of it, it would be much appreciated.
    Option 1 is not really an option for me, because I am sticking with premiere pro cs4 -- I'm not going to get another editor just because it has .mod support. That leaves me with options 2 and 3: Convert to avi, or change the file wrapper/extension properly with FFmpeg and then simply import the resulting .mpg file... Which is better? Or is there yet another solution that I am unaware of that would be even better?

  • Adobe Premiere Pro CS4 - Export issue.

    Hello to the Adobe Community!
    Maybe someone here can help me out with some Premiere issues.
    I am using Premiere Pro CS4 4.2.1.
    I'm on Windows 7 64 (Ultimate N).
    My system is:
    Intel Core i5CPU [email protected]
    3GB RAM
    I have updated all Adobe software, and my drivers.
    I've had a good look over the forums and I found this article. It's very useful, and hoping it would be my saviour, I went through all the advice given.
    Still no luck!
    I'm trying to export the media from Premiere to Media Encoder.
    My sequence settings are:
    1280 x 720
    Square pixel aspect ratio
    25fps
    48000HZ - Stereo
    My render settings are:
    MPEG2 - DVD
    PAL HIGH QUALITY
    Everything else is left to the default setting.
    When I try to encode via the Media Encoder, it gets to about 1/3rd of the way through and I get a message:
    'Encoding Failed
    Error compiling movie.
    Unknown error.
    I have also tried, as per previous posts, to use the Adobe Dynamic Link, both from Premiere out to Encore, and importing in from Premiere when I'm in Encore.
    Still no luck! I get an 'encode failed' message when I try to transcode it. I'm pulling out my hair with this one.
    Can anyone shed any light on this?
    NB: This is my first post on this forum, so apologies if I have missed anything out.
    Thanks in advance for any advice,
    Em.

    Thanks everyone for your help and suggestions - Evan I think you might be right on the memory issue.
    I tried one last thing - running Premiere in compatibility mode as an administrator.
    Again, it failed after about 7 minutes. It's quite a complicated project, but it's only 14 minutes long.
    The strange thing is that although it doesn't seem to render on my work pc, it renders on my home pc, which has similar specs:
    CPU: Intel Core i5 760 2.8GHZ 8MB
    MEMORY: 4GB (2x2GB) PC12800 DDR3/1600mhz Dual Channel Memory
    MOTHERBOARD: Asus P7P55-M Intel P55 Chipset
    NVIDIA GeForce GTS 450 1GB
    I forgot to say that my work pc, listed above uses an NVIDIA GeForce 8800 GT card.
    Do you think that 1GB can really make all the difference?
    Sorry if that's a stupid question, I don't have a massive amount of technical knowledge.
    Cheers!
    Em.

  • H.264 playback stutter in Premiere Pro CS4

    Details:
    Adobe Premiere Pro CS4
    Intel Core 2 Quad Q6600
    3GB RAM
    32 bit Windows Vista SP2
    I'm having problems with the playback of H.264 video files in Premiere Pro CS4. The files are 1280x720 60FPS clips, ranging in size from 8MB to 40MB, and they were shot with a Kodak Zi8 handheld HD camera.
    The clips play fine with the following players on my computer -- VLC, Windows Media Player, and Media Player Classic. However, when importing the clips into Premiere and viewing them either in the preview pane or the timeline, the video is stuttering heavily. This is impeding my editing work as the only way to smoothly view the clips in Premiere is to drop them in the timeline and render the project, but I obviously can't work like this because I cannot render the entire project every time I drop in a new clip, or add an effect, or rearrange a clip, etc.
    I'm at a loss as to a solution here, any help would be appreciated.

    O.K
    Here is what I did.
    I just dumped your clip into a timeline I was working on at that particular time - which just happened to be a P2 720p seq.. You dont need DVCPRO CODECS. Use what the demo says. HDV
    I only did this to see exactly how compliant your clip was.   It turned out to be compliant and editable in an un matched timeline ( Good start).
    I throw all sorts of extra stuff at this timeline ( its my base setting for what I shoot and export from)  but  I usually have to render the extra stuff  so as I can play them  back smoothly.  Thats the way it works. One day ( god forbid) there maybe a preset for a camera like you are using.
    I have been doing it for years and rendering is a fact of life.  I am dealing with Professional footage including Prores and H264 from D5's etc as well as
    my own HD footage and footage from 35mm film cameras.
    Your clips are kind of hybrid so you need to expect this.  Forget about the demo.  Deal with what you have ,convert them or use a different camera.

  • Premiere Pro CS4 - Problem with the monitor program.

    Hi. I'm not able solving problems with the monitor using PremiereProCS4. When I drag a photo (also only one photo) in the timeline and play it in the monitor program, vision in the monitor program doesn't run:black monitor or a little part of the photo appear... sometimes distort colours. Asus P5QPRO, Intel 9550 and Sparkle Nvidia GeForce 9800 GTX+ 1024 DDR3; last gpu driver and directX are installed. Different configuration of stratch disks were tested. Where am I wrong?

    Dear Bill,
    thanks for your answer and your article. I tried with your NTSC 4:3 720x480 PAR 0.9 and, "magically", no more problem!!! I used the script pocedure in Photoshop CS4 to resize my images. Now, before starting my workflow and hoping not to overuse your patience, I would like to indicate you my equipment and my target: I use a Canon Eos 7D (generally for still images, 90% are vertical, and just some videos) and I use Premiere Pro CS4 to burn a dvd (normal, 4.7 Gb or double side, more than 8 Gb) with a 16.9 lcd tv (I'm Italian); my camera save as .jpg and .raw (but why use heavy .raw files if I've to redute to 720x480?!??).
    So, according to your "everyone wants the highest quality that they can obtain when doing theri videos..." and "your video project may vary, so you will need to plug in the dimensions for YOUR video project in that case", I've a question: which is the best for me?
    And then:
    1 - Premiere Pro CS4 havn't a batch or a script procedure for still image like PS (only for videos)!?!
    2 - Premiere does'nt allow you to import images like 4.181 Kb (a too large dimension file error appears)!
    3 - In the timeline of Premiere, after you dragged images, you can select them and right click to perform "resize to frame size": it seems to run good without problem, but what appen to the photo? Which is it's pixel?
    4 - In the general preferences of Premiere you can to optimize rendering for "memory" or not: which is the best for you?
    5 - I attached file with a screen of something strange in Premiere: dragging an image (the first of the project) in the timeline, the timeline appears distort (you can see the part in the yellow square): then, when I render the project and play in the monitor program, it becames normal.
    Thanks!

  • Importing Illustrator and Photoshop files to Premiere Pro CS4 (without rastering)

    Hello,
    I've made some economics graphs in illustrator that i'm importing into premiere.
    Premiere pro cs4 doesn't import illustrator files as layers, just a single image.
    I exported from illustrator to save as a .psd to maintain the layers.
    I then imported the .psd into premiere which created a folder with all the .psd layers.
    I dragged the .psd layers onto the timeline so I could animate them with dissolves, but noticed they became pixelated.
    I rendered the layers and they still looked pixelated, even after export they were pixelated.
    From what I understand, illustrator files become rasterised when you export as .psd.
    Is there any way of maintaining the crisp vector graphics created in illustrator when importing into premiere?
    Can I avoid rastering the files?
    Thank for your help in advance
    Kind Regards
    Ant

    Thanks for your reply and welcome to the forum.
    I wondered why premiere was doing such a bad job of anti-aliasing...it turns out that all the .psd files were imported as square pixels instead of rectangular so I right clicked and selected interpret footage, then selected conform to DV PAL1.45.
    I assumed that as I set up the original Illustrator document as a video document (720x576) it would maintain the aspect ratio.
    Somewhere between exporting to .psd then to premiere the aspect ration somehow changed?
    I've found a great tutorial that appears to have a better workflow than the method I was using, by first creating a template in premiere, which can be exported directly to photoshop, maintaing  the correct aspect ratio. It means i'll have to draw up the graphs in Photoshop now instead of Illustrator.
    http://www.youtube.com/watch?v=s8HUOAJomao&playnext=2&playnext_from=PL

  • Slow render time in Premiere Pro CS4 (with fast computer?)

    Hello people on the Adobe Forums,
    I hope someone can help me with this question, it's been bothering me a long long time now and this week i have to make a decision, or fix the problem and keep this configuration, or spend money for a new cpu (i5 750) and a new motherboard. But i think this computer should do better then it does. I have the following configuration:
    AMD Athlon X2 4600+
    Nvidia GeForce 7800GTX
    2× 1Gb OCZ memory (DDR, PC2400, 250mhz)
    Storage Disks:
    Seagate 320GB SATA (7200, i think)
    WD 74GB SATA (10.000RPM, OS)
    Hitachi 500GB SATA (also 7200, i think)
    WD 1TB USB (SATA) (extern hdd)
    WD 250GB SATA (7200, i think)
    So, i don't understand the problem, Premiere is running very slow on my computer.. The rendering of a 5min piece of just a random movie takes like 3 hours! Just right now i am rendering some things I filmed with my mobile, it does like 1 frame in 10sec!! On most pc's with this vice versa!
    So the cpu is not that old, and neither is the videocard, meaby the memory is a little bit low.. Could that be the problem?
    Hope you people can help me out, i searched Google and everywhere but can't find anyone with this problem..
    List of software:
    - Windows 7 Ultimate
    - Adobe Premiere Pro CS4
    Drivers are, as far as i know, all up to date, i updated the Adobe programs too..
    Describe source material, Codec: XDCAM-EX Movie (mp4)
    But like i said, it happens too avi too, it think that was DivX..
    I bought this pc second-hand, so it could be that something in the processor is already broken and i didn't notice it at all.. i searched like everywhere and also tried too reinstall the program but that doesn't work either..
    Some more info:
    http://www.creadion.nl/premiere/info.jpg
    http://www.creadion.nl/premiere/info.nfo
    http://www.creadion.nl/premiere/DxDiag.txt
    Ohye, and the PPBM: http://www.creadion.nl/premiere/Output_PPBM4.txt
    With friendly regards,
    Marinus

    Well, I'm helping other people too here on some dutch foras and i hate how people say things like "Doesn't work. Help" and just wait and wait for someone to answer. Plus i want to order my new hardware this evening (10:27pm now here), so meaby that's a 'cause' too, to make you people answer fast! (and it worked! hehe)
    So, what i am thinking of right now is to upgrade the motherboard, cpu and ram.. The videocard can wait a little more:
    - Motherboard: MSI P55-GD65 (not sure of this one, good reviews&tests, Asrock P55 Extreme is an option too.. be my guest to do another recommendation) (Asus P7P55D seems like a good option)
    - CPU: Probably an I5 750 from Intel, heard good things about this one.. Although i've always used AMD..
    - RAM: I really don't know, don't see many differences between the RAM sticks.. But yeh: OCZ Gold OCZ3G2000LV4GK
    Sorry for no links to product pages, you have to do a little search, i only got some dutch websites, and i know for sure that you all having you're own comparing/specs websites (which i don't know) .
    Thank you very much untill now, meaby i get another reply tonight.. Ohye, plans changed, i'm not ordering tonight anymore.. I'll do that tomorrow morning (I'll do a few calls to a view webshops and see if they got in stock, if so, i'm gonna drive (or go with bus) to one of them.. I need it really really quick, need to submit a project from school August 30
    Thanks everyone!
    Just took a look at the links you gave me, the Asus P7P55D is an option too!
    Took a look at the links, added the "Asus P7P55D".
    What i forgot to mention: I got a budget with a max of like €400,- (That's like 510usd, I don't even really have the money) so I can't buy a whole new pc..

  • Premiere Pro CS4 crashes after installing Microsoft DirectX

    It looks like I just made the biggest mistake of installing Microsoft DirectX causing Premiere Pro CS4 to crash. When I create a new project and a new sequence to open it crashes. I submit a report and try it again and it crashes again and again. I uninstalled just Premiere Pro CS4 (I have the Production Premium Suite) and now the installer hangs up at the system check. I'm using WinXp 32bit 2.6 Quad Core Nvidia GeForece 8800 GTS 512.
    Deacon_1

    Deacon,
    Along with the DirectX update, did you install anything else?
    After your installation of the DirectX update, did you also update your video and your audio drivers? If not, that would be my first thing to try. Both of those drivers can be rendered obsolete in a heartbeat, and because PrPro interfaces more closely with those, than nearly any other program, it will fail, while simple players, etc. still function.
    Good luck,
    Hunt

  • Premiere pro cs4 crashes during splash

    hi i recently installed premiere pro cs4 and when i try to open it it crashes when it gets to loading solidcomposite.aex. i tried removing each plug-in and it kept crashing on the next plug-in. however, when i removed asiowdm.dll the splash immediately ended and appeared to crash because nothing opened. i dont know what asiowdm.dll is but would anyone know why this file would cause problems and if there is anything i can do to fix it?
    THANKS!

    Mike,
    When something works one day, but not the next, it is almost always a sign that something has changed. It could be a seemingly insignificant incident, such as MS Windows doing an automatic update, or it could be more significant, like loading new software, or adding/removing hardware.
    Think about what has, or might have, gone one, from the time that PrP worked, and now. Check the schedule of your OS updates and see if any were installed in that time. Did you change any hardware? Did you install ANY new programs?
    With the OS updates, drivers that worked perfectly before can be rendered obsolete. Check for any video and audio driver updates for your system. Also, check your current version of QuickTime and also your Flash player. I may be confusing the programs, but IIRC PSs installer relies heavily on the Flash player. Might be true for PrP too. Many folk had problems with PS installing, and either had a hosed Flash player, or needed to update what they had.
    If Jeffs idea does not work, also look on the MS Windows site. There was an issue with an older version of MS Installer and PS (do not recall this problem with any other Adobe programs, but might have missed the articles). MS corrected the problem and a simple install of the new MSI took care of all issues. Do not recall if this was in XP, or Vista, but MS is pretty good at listing which OSs their fixes cover.
    Others have had positive results by doing an install from the contents of the DVDs copied over to the hard drive (need some real estate there), and then running the installation from the Desktop. Some also needed to do the install from Safe Mode, but not all.
    Again, if Ive mixed up exactly which Adobe program suffered from some of these, I apologize. BTW, what forum am I in? Ah, now I see, PrP CS4...
    Good luck and please let us know how it goes,
    Hunt

Maybe you are looking for