Premiere Pro CS4 added contrast H.264 preview files

Hi,
Any help I can get with this problem would be amazing.
I recently updated my OS to 10.6 as there were programs I wanted to run not available on 10.5, however this caused other issues with Premiere that I couldn't fix so I just decided to go back to 10.5. With both installs I reformatted the hard-drive then installed the OS. Now that I've reinstalled OSX 10.5 and updated to the most current version, and then installed Premiere Pro CS4 and updated that to the most current version (4.2.1) and also updated the codecs for Premiere, I'm having an issue with my preview/render files in my timeline that I never had before. It appears that now when I render my original H.264 files the preview/render files have added contrast/crushed blacks and blown out highlights.
Basically I'm editing H.264 footage from a DSLR, and when I open up a project that I was working on before I began this upgrade mess it opens correctly, but if I extend a clip in my timeline to include part of the original clip that was not previously rendered, Premiere renders this clip with what appears to be increased gain and pedestal/increased contrast. I've also tried this in a new project and it still renders with much more contrast than it used to. Whether in a new project or previous project, Premiere seems to decrease pedestal so my blacks are around/below 7.5 IRE and my whites are at/above 100 IRE. it looks really messed up when this occurs in the middle of a clip that was half rendered before and half after the install. Also I'll bet it's not going to help when it comes to color correcting and it looks like I could be losing image data.
I don't know what has caused this as it was working properly before my attempted upgrade, and I installed Premiere the exact same way as I did the last time I installed it and I'm using the same version. The only hiccup was after the install and upgrade it said media offline on my old project until it asked me to update codecs, once codecs were updated it displayed all footage in my timeline correctly and then I noticed that I could no longer render preview files to the same standard.
Here are screen shot comparisons of a video from my timeline. These are back to back frames, the top one was rendered before the most recent install, the other rendered after. I have put a YC Waveform chart beside the image. Sorry I think the best way to see it is just to follow the link otherwise it's gonna be too small.
http://www.flickr.com/photos/86776146@N03/8101475154/sizes/l/in/photostream/
Also here is a screenshot of the settings I'll describe below.
http://www.flickr.com/photos/86776146@N03/8101463115/sizes/l/in/photostream/
Computer:
Mac OSX 10.5.8
Intel Core Duo
Premiere Pro CS4 (4.2.1)
Project Settings:
HDV 720p
29.97 fps
1280 x 720
square pixels
30fps drop-code
I-Frame Only MPEG (video codec)
I've already searched for a solution to this but come up with nothing. I read a bunch of stuff on the increase in gamma that can happen with .mov files but I don't think this applies to my situation as I would have been having that same issue with my previously rendered footage.
Anything would be really helpful...Thanks
Message was edited by: Mike542

Okay so I've been looking into this in depth over the past few days and I haven't come up with a lot. I have noticed that it's not just the render files but also the inspection window where the clip displays in this manner. It looks like the luma range (as seen in YCbCr scope) is being limited between 7.5 and 92 IRE and I think this is maybe a good indicator of the problem. Why this is happening I don't understand. On my clips that were previously rendered in this timeline there is full range from 0 to 100 in the luma from the YCbCr scope. These files were rendered to an external drive from before I reinstalled Premiere, so it's any h.264 files that I am using after reinstall that are having this issue. I have attached another screen capture illustrating this (look at line to right of scope showing full luma range). Also I have some .mts files from another camera and they import with full luma range as well.
http://www.flickr.com/photos/86776146@N03/8114886495/sizes/l/in/photostream/
When playing my h.264 files in Quicktime or VLC they look about the same in terms of blown out whites and crushed blacks. Does Premiere rely on Quicktime for its h.264 codec or does it have it's own? Is there a way to force premiere to update its codecs/manually download and replace the h.264 codec?
I really can't understand what's happening here and I can't do any work when imported clips are this messed up. Can someone please help out on this!!! Super frustrating and seems to constantly happen with Premiere...

Similar Messages

Slow Playback in Premiere Pro CS4 (how do you lower preview res?)

Hi everyone, I was just wondering how to lower the playback/preview resolution while3 editing in Premiere Pro CS4? I'm editing 720p video (.mov format, that's what my camera shoots in, so I don't think I can change that). All I can see when I right click the source monitor is "Quality > High, Draft, Automatic". Is there anything else I can select? (kind of like in after effects, where you can set it to 1/2, 1/4, etc.). I've been searching the internet for the better part of the day and all I've found is that 'quality' menu I mentioned earlier.
It's still painfully slow to watch on 'draft', and it doesn't look like it makes that much of a difference in quality. Now, my laptop isn't exactly the rendering beast I'd like it to be, but it can handle 720p [slowly] in after effects so I think it should work in premiere too.
Thanks!
PS: Any of you experts think this would be a good computer for NLE / rendering effects?
http://www.tigerdirect.ca/applications/SearchTools/item-details.asp?EdpNo=7192259&Sku=B69- 1277

Thanks for clearing that up!
New desktop it is... I'll probably be swapping out the low power drive for a faster one, since Harm mentioned that in his 'building for NLE' thread.
Oh yeah, one more thing: How can I force it to render? For example, I put an HD clip into the timeline, it has a yellow bar along the top of the timeline in it's location, yet when I hit enter it just plays (with annoyingly low fps)?? Going to sequence > render effects in work area doesn't work either.

My newly reinstalled Premiere Pro CS4 is unable to support .mov files. Is there anything I can do?

The files were supported when I created the project on a college computer in a previous version of Premiere in 2009. I have tried downloading quicktime and restarting so far.
Cheers,
-Ewan

Installing Quicktime, usually but not always the latest version, is supposed to permit editing MOV files
But, exactly what is inside the MOV file, and what camera did you use?
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
For Mac http://mediainspector.massanti.com/

Premiere Pro CS4 "Export Settings" window does not show up.

Hello,
I've run into a new problem with Premiere Pro CS4. Basically, when I select "File > Export > Media" my Export Settings window doesn't show up. If I click on the Premiere window I hear the beeping sound and nothing happens, if I hit Enter the Export Data window pops up and then Media Encoder opens. So, it seems that my Export Settings window is still open but I can't see it and make the necessary setting changes. It does not appear to be minimized and I can not locate it on my desktop anywhere. This is really frustrating because I was able to see the Export Settings window just a few weeks ago when I was exporting my last project. I've tried changing my screen resolutions but that didnt reveal the Export Settings window.
Does anyone know what is going on here and, more importantly, how I can fix it? I am really stuck here and am working against a deadline. Any and all help is greatly appreciated!
-Ben

Ben,
THANK YOU!!!! For two days I have been struggling with the exact same issue. And of course it was simple to fix, if I had just thought about it. Thank you for taking the time to post your experience. I had tried all sorts of stuff trying to get everything onto my #1 monitor, with desktop & workspace resets, resizing my display, etc. After reading and printing your post,
Hitting ALT+Space,
Down Arrow,
Enter,
and then pressing the left arrow and watching my Export window slide into view, I was laughing so hard, that I was tearing up. It would have been a month waiting for my second monitor to get repaired to get to see what was still being displayed on this ghost monitor. Each week, I video and edit our church's service and then post three versions (Windows Media Player, Ipod-MP4, MP3 Audio) of it to our web site. I would have been four weeks behind were it not for your post.
Again, a BIG Thank You!!!
Tony Salso
[email protected]
Cedar City, UT 84720
Tony—Professional Digital Pictures
--Videographer and Webmaster
Red Hills Southern Baptist Church
Serving Jesus in Southern Utah
[email protected]
www.redhillssbc.org

Premiere Pro CS4 ERROR import VOB file

Today my Premiere Pro CS4 had Error about importing VOB file but yesterday it's can import smoothly.
please help me fix the problem.
*ERROR Picture*
thanks
ps. i just done updated CS4 to the latest this morning but the ERROR still show.

Harm,
I also wonder if the OP's version might not have reverted to the "trial" version, with the update. Because the VOB is an MPEG, that would not be supported.
If this has happened, you will need to Deactivate, uninstall, run Adobe Clean Script CS4 several times, re-booting between each, and then re-installing and Activating. Then immediately do the full updating. To test whether you now have the "trail" version, just Import an MPEG file, and see if you get a File Format/CODEC error message.
Good luck,
Hunt
PS for some background on VOB's, this ARTICLE might be useful.

H.264 playback stutter in Premiere Pro CS4

Details:
Adobe Premiere Pro CS4
Intel Core 2 Quad Q6600
3GB RAM
32 bit Windows Vista SP2
I'm having problems with the playback of H.264 video files in Premiere Pro CS4. The files are 1280x720 60FPS clips, ranging in size from 8MB to 40MB, and they were shot with a Kodak Zi8 handheld HD camera.
The clips play fine with the following players on my computer -- VLC, Windows Media Player, and Media Player Classic. However, when importing the clips into Premiere and viewing them either in the preview pane or the timeline, the video is stuttering heavily. This is impeding my editing work as the only way to smoothly view the clips in Premiere is to drop them in the timeline and render the project, but I obviously can't work like this because I cannot render the entire project every time I drop in a new clip, or add an effect, or rearrange a clip, etc.
I'm at a loss as to a solution here, any help would be appreciated.

O.K
Here is what I did.
I just dumped your clip into a timeline I was working on at that particular time - which just happened to be a P2 720p seq.. You dont need DVCPRO CODECS. Use what the demo says. HDV
I only did this to see exactly how compliant your clip was. It turned out to be compliant and editable in an un matched timeline ( Good start).
I throw all sorts of extra stuff at this timeline ( its my base setting for what I shoot and export from) but I usually have to render the extra stuff so as I can play them back smoothly. Thats the way it works. One day ( god forbid) there maybe a preset for a camera like you are using.
I have been doing it for years and rendering is a fact of life. I am dealing with Professional footage including Prores and H264 from D5's etc as well as
my own HD footage and footage from 35mm film cameras.
Your clips are kind of hybrid so you need to expect this. Forget about the demo. Deal with what you have ,convert them or use a different camera.

Premiere pro cs4 is adding an extra frame to my sequences

Premiere Pro CS4 is adding an extra frame to my sequences so that when I import them into Encore an extra, black frame plays at the end. In the program monitor my sequences stop at the frame I have set the sequence to end at but the counter on the bottom right of the program monitor shows that an extra frame has been added. This duration, not the duration I have set for my sequence, is what Premiere Pro is importing into Encore. I have spoken to Adobe technical help and the representative was having the same issue but she could not resove it. Help! Thank you!

Hello Wil.
For various reasons, I always add Black Video to the end of my Sequences, to allow for any extra Audio Units. As I also Export DD 5.1 SS, I allow 02 sec. of Black Video at the beginning, to allow set-top players time to "lock onto" the DD 5.1 SS Audio Track. Many high-end units require this extra time at the beginning, too.
Good luck to the OP,
Hunt

Can Premiere Pro CS4 import H.264 quicktimes?

Can Premiere Pro CS4 import H.264 quicktimes?

If the QT's are pure H.264, and you have that installed, then there should not be an issue.
Some camera mfgrs., and others, like to tweak H.264, so there is no all encompassing answer.
If you are having issues with a QT file, that seems to be H.264, you might want to look closely at the full specs. in MediaInfo, just to be sure that all settings match what they should.
Where did these files come from? That might tell the tale.
Good luck,
Hunt

Editing H.264 .mp4 files in premiere pro cs4?

I recently got a GoPro HD Hero camera, and i've been shooting in 720 and 60i, the files that come off of the camera are in .mp4 format, and when i import them into premiere pro cs4 i can hear the sound but all i see is a solid green screen, can anyone shed some light on this problem?

I cant even get it to import to CS4
On both my desktop and laptop.
It crashes and just hangs.
I tried CS3 but it would not even try to import saying not a suported format.
im updating to the new 4.2.1 to see if that works.
my compter is a few years old and it doesnt like HD.
I can play HDV.
Even just playing yours in my media player it is having a hard time keeping up.
It plays fine on the laptop in the player so that is the one updating now.
Even G-Spot says that the codec is undetermened.
Glenn

Premiere Pro CS4 does not import EX1 files longer than 1 hour

I had to record a long speech and used a Sony XDCAM HD EX1 camera with a 32 Gb and a 16 Gb SXS cards. The speaker paused after 1h 26 min. I stopped the recording and waited until the green light that allows recording the segment came on. Later I recored smaller segments.
I copied all the recorded files to the PC hard disk ( Intel Quad Core 2.4 Ghz with 3.25 GB RAM with XP Proofessional SP3).
I used Sony Clip browser to watch the clips and all of them were perfect. Then I opened premiere Pro CS4 4.21 and I wanted to import this 27 GB file. In the media browser appeared only one mp4 file. All the short ones where imported normally but the big one freezed premiere and the only way to close premiere was with the windows task manager.
I checked again in the Sony XDCAM clip browser version 2.6 and you can see it perfectly. There was a detail, though: in the lower part of the preview window I saw 6 marks. When I checked the file in the disk, I found that the 27 Gb file was separated in 7 parts. Each of them was 3.51 Gb and the last one 2.5 Gb. That means that the file was cut in pieces that were less than 4Gb supposed max file lenght.
I tried many ways to import and no result. The I used the "export " of the sony clip browser. There is one choice that is "MXF for XDCAM HD". When I chose this item another panel appeared and showed a 1440 X 180 59.94i 25Mbps choice. I took it and after some time it created the 27 Gb file that I could import it normally with 4 audio tracks. But there is a drawback a "media concept" logo appeared to remeber to "buy" the program.
Anyhow, the question is: How can I import to Premiere CS4 a MP4 file created by a Sony EX1 HD camera whose lenght is more that 1 hour long ?
Thanks
Wolfgang

I think is the contrary because the clip browser copies all the foleders needed. I got this opinion from another forum that copies into Final Cut:
"My workflow is to create a hard drive folder for the project, then use Clip Browser to import the clips from the card. I review the clips, labelling them, adding logging notes, setting the status and putting in essence marks as needed (the number of characters available for the essence mark description is fairly limited). I then open FCP, create and save a new project then call up XDCAM Transfer. I select the project folder and it will pull in all the clips. I then filter for OK status, occasionally create subclips then import. The clips come over to the bin, with their names and with the essence marks converted to markers. Obviously there are backups taken - I've not mentioned them."

Premiere Pro CS4 (Windows 7) will not (Capture or Record) connect with DV Cass Recorder

For 12 yrs I've Never had a problem w Adobe Prem Pro seeing my Panasonic AG-DV2000, DV cassette Recorder. Premiere Pro CS4 (with Windows 7 Ultimate) will not connect (Capture or Record)with my DV Cassette Recorder - Panasonic AG-DV2000. I upgraded my computer to below components & added Windows 7 at same time. Have had Adobe Prem Pro CS4 since fall with no problems. I usually have 2 - 5 videos, with 2 - 4 audios, going at same time on my timeline. (These digital videos & audios I shot myself professionally with mini DV cassettes.) Most projects are between 10 to 50 mins on timeline, w transitions or crossfades between video & audios. Firewire attached from computer to Panasonic. No Capture card in new system, not needed, use to watch over an external TV, now watch over a second monitor or in program monitor.    [Am I just missing a simple setting??]           Computer below & settings:   very up to date.
motherboard                        ASUS P6T
CPU                                         i 7    2.67 GHz
RAM                                       6 GB
video                                      ATI Radion HD 5700 1 gig Memory OpenGL 3.2
Main Drive                            500g SATA 7200 rpm
Raid Drive                              1.2 TB 7200 SATA
Windows 7                            64 Bit Ultimate
DVD/CD                                  writable Disc Drive
AVG                                        Antivirus 9.0
Playback Settings
                Realtime Playback
yes                                          Desktop Video Display
External Device                    DV 25 720X 576i
Aspect Ratio Conv              Hardware
yes                                          External Device Audio
                Export                     External Device                    DV 25 720X 576i
yes                                          Disable Video output when in background.
24p Conversion Method    - Interlaced frame 2:3:3:2
Preferences          (only things not set at default)
Audio Output Mapping       --   Premiere Pro WDM Sound (have also tried Audio Out)
Device Control     DV/HDV Device Cont Options: NTSC, Panasonic, AG-DV2000P, Auto Detect
                                (Check Status) Says it is ONLINE
Media                     Cache files saved to My Raid drive not C drive (so they will run faster)
                                Indeterminate Media Timebase:   29.97 fps Non Drop Frame
Project Settings Video -- Timecode             Audio -- Audio Samples
Capture Format (tried both) DV & HDV   (all settings checked for during preview & capture)
                Under DV               says Panasonic is Online, export to tape/it renders/Premiere controls the Panasonic recorder -looks like it's recording, but see no video -                                                 hear the sound. On Playback nothing was recorded? ( And Can't capture from tape to computer)
                Under HDV            Says Panasonic is Offline, but computer able to control the Panasonic start/stop, but doesn't record or capture tape to computer?
[ I think this DV/HDV part is correct...... it's getting very confusing at this point??!! Your help is appreciated Thank YOU ]

http://www.studio1productions.com/Articles/Firewire-1.htm
Above article HELPED me -- and is working fine!!
Was an Easy fix, took less than 2 mins.
After a 2 1/2 month ordeal.
Info from the "forum help group" through adobe. jk

No sound when I export to encore from Premiere Pro CS4

I have created two separate video project in Premiere Pro CS4, when I export via dynamic link to Encore one exports with both video and audio, the second only exports video and no audion. However, when i look at the properties of the asset the Media Category indicates video & audio. Any suggestions?

Lots more information needed for anyone to help... starting with your source video and going on to your project settings
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
For Mac http://mediainspector.massanti.com/
http://blogs.adobe.com/premiereprotraining/2011/02/red-yellow-and-green-render-bars.html
If you have a red line over the timeline after importing a video and before adding any effects... your project is wrong for your video... read above about codecs
Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project
H.264 will NOT work inside an AVI wrapper http://forums.adobe.com/thread/854115
More information needed for someone to help... click these links and provided the requested information
-http://forums.adobe.com/message/4200840
-http://forums.adobe.com/thread/416679

Premiere Pro CS4 Functionality Questions

Hey everyone,
I've been thrown onto a Project which is using Premiere Pro CS4 (we have been using Roxio VideoWave), and have some basic questions I'm hoping someone can answer (I'm no expert in the video editing software field):
1) in Video Wave, I can easily add photos and movies to a project just by dragging and dropping from Windows explorer. In Premiere, it seems the only way I can add photos and videos to a project is to import the media, and then drag them from the "project library" to the timeline. Is there a way to drag and drop a photo directly from Windows Explorer into a Timeline? If so, please tell me what basic step I'm missing. :-)
2) Is there any way to preview what a transition will look like before actually adding the transition to the movie?
3) When I add a video/photo from the project library, I have to hold the CTRL key to have it to a "ripple" insert (eg, push everything else in the timeframe out). Also, I have to hold the CTRL key to do a "ripple trim". Is there any way to set these actions as the default so I don't have to hold the CTRL key down for these?
4) Lastly (for now :-) ), in Roxio Videowave I could easily edit the volume of a sound clip in the timeline just by clicking on the middle line going through the sound wave and dragging it up or down. I can't seem to figure out if there's a similar easy way to do it in Premiere Pro.
Any help appreciated! Again, sorry if these are basic stupid questions, but Premiere is currently way above my level of experience.
Thanks! :-)

1) Is there a way to drag and drop a photo directly from Windows Explorer into a Timeline?
In Premiere, no, there is not--at least not from Explorer itself. You need to import the files first (you can drag and drop them into the Project panel/bin), and then edit them into a sequence. However, you might try out the Media Browser; go to Window > Media Browser if you don't see it. Media Browser will give you an Explorer-like interface that you can use to drag files directly from the folder structure on your hard drive into a sequence; when you do so, they will simultaneously be imported into the project.
2) Is there any way to preview what a transition will look like before actually adding the transition to the movie?
Nope; you just have to try them until you find one you like. Then memorize it
3) When I add a video/photo from the project library, I have to hold the CTRL key to have it to a "ripple" insert (eg, push everything else in the timeframe out). Also, I have to hold the CTRL key to do a "ripple trim". Is there any way to set these actions as the default so I don't have to hold the CTRL key down for these?
Nope; those are hard-wired. It'll become automatic for you after awhile.
4) Lastly (for now :-) ), in Roxio Videowave I could easily edit the volume of a sound clip in the timeline just by clicking on the middle line going through the sound wave and dragging it up or down. I can't seem to figure out if there's a similar easy way to do it in Premiere Pro.
You probably don't have the volume or keyframe adjustments enabled for your track. Check the following screenshot:
You can select either "Show clip Keyframes" (which lets you keyframe other effects via the dropdown on the clip) or "Show Clip Volume" which shows just the volume effect. A yellow line will appear across the waveform; you can drag it up and down to adjust the total volume of a clip, or use the Control/Command key and click on the rubberband to add keyframes/nodes so that you can ramp the audio. You can also Control/Command click on a keyframe again to make it sprout handles so that you ease in or ease out the level. Note that you can also select the "Track" options, but that (as the name implies) adjust the level for the whole track and not individual clips.

Premiere Pro CS4 over remote desktop does not play sequence

Hi all,
I have been researching this issue over the internet but I have found absolutely no references to it:
I am running Premiere Pro CS4 on my high-resource PC but would like to work from a different room so I am remoting form my laptop to my "good" PC.
The system lets me do everything I could normally do when working directly on the main PC with the exception of playing back my edited files (before rendering). This is an obvious handicap since I can not watch my edited sequence and am, therefore, working in the blind. I am able to step through it frame by frame, but when I click the play button, it changes to a pause symbol (as usual) but nothing is shown in the video window. This does not just happen when previewing my edited sequence but also when previewing any imported resource.
Essentially, Premiere Pro CS4 is not playing any video content over a Remote Desktop.
Other normal playback software (such as VLC, Windows Media Player etc...) works though, so it is not an issue of no video playback at all. This just happens when I'm using Premiere Pro.
Any suggestions as to what this may be? Any help will be greatly appreciated!

I was able to edit a full 1080p HD video in Premiere Pro CS5 remotely using HPs RGS (Remote Graphics Software). I had a Workstation at work with Premiere Pro installed on it and all the source footage on it. I was then able to log on remotely from home with my old weak-sauce desktop and successfully edit and play back the HD footage remotely. You just do a google search for HP RGS or go to this link. http://h20331.www2.hp.com/hpsub/cache/286504-0-0-225-121.html
There is a free trial available too. I don't know why there is not more information about RGS on the web, but it seems to me to be the only solution to work on Premiere or After Effects remotely.
I hope this helps

Adobe Premiere Pro CS4 4.0.1

An update to Adobe Premiere Pro CS4 will be available via Adobe Update Manager shortly. The file will also be available for download tomorrow (November 20) on Adobe.com, as will the readme (at http://www.adobe.com/support/documentation/en/premierepro/releasenotes.html). In the meantime, here is the text of the readme.
We're really excited about this update, especially considering we released CS4 just one month ago. To force an update, choose help --> find updates from any Adobe application. The AME update that releases with this update is required as well.
Important note: if you are using the Elemental Technologies RapiHD plug-in, you must update to the latest version in order to use Adobe Premiere Pro CS4 4.0.1. You can update the plug-in by visiting the Elemental Technologies web page: http://www.rapihd.com/?q=node/129
New in this release
- OMF export
- Final Cut Pro import
- Edit in Audition (Windows only)
- Surcode support
- AAF import and export
- High quality motion
- Third-party support
Notable fixes
- Attempting to trim locked tracks results in a crash (#1888355)
- Crash on Win and error on Mac when using Numpad-Asterisk keys to generate marker when
playing in Program Pane when Effect Controls pane is closed (#1890626)
- Crash when the Metadata panel is brought into focus when a DVCPro HD clip is selected
(#1884633)
- When a filter/search is applied in the Metadata Panel and then a different asset is selected, the
filter does not update (#1876954)
- Custom schema causes Adobe Premiere Pro to crash performing many basic operations,
starting with New Project (#1888938)
- Render of transition in imported EDL-based sequence fails; on Mac, causes application to hang
indefinitely, user must be force-quit application (#1873434)
- After ASND is saved, an effect is always ON if it turns OFF while playing (#1864978)
- Crash when attempting to load a project that contains a composition if headless Adobe
Premiere Pro is serving Adobe After Effects (#1871578)
- Exporting video as MPEG 4 will create a video file that imports at the incorrect length
(#1851063)
- Trimming both ends of a clip, then moving the clip will cause looped playback to be silent, or
only playback portions of the clip (#1868409)
- When exporting a timeline containing cuepoints, deleting a cue point via AME Batch-> Export
Settings, the cue point is still present in the output file (#1866690)
- Playing an audio-only file in the source monitor will cause the application to lock up (#1887330)
- Exporting any MT session as 24bit WAV leads to garbled audio Mac only (#1881684)
- Adobe Premiere Pro allocates too much memory and reads too much data from disk when
loading project files on the Mac (#1890579)
- With camera connected, opening clip from Timeline into Source and selecting File  Debug
results in a serious error (#1889197)
- Export to tape is active from DVCPRO HD sequences (#1863718)
- Application intermittently crashes when exporting a movie (#1868405)
- Render and Replace of offline clips takes over 20 minutes (#1885273)
- Application crashes when cancelling Normalize Audio Track dialog (#1887615)
- When an AVCHD clip is inserted into a DV timeline with Scale to Frame Size applied, rendered
previews of the clip show artifacts during Timeline playback (#1863988)
- Using scale to frame size in a timeline lowers output quality and softens detail and sharpness;
typing in scale attributes manually or using Adobe After Effects produces much better results
(#1527669)
- Multiplexed MPEG files exported to HD size and then imported back in to Adobe Premiere Pro
show up as 601 color space instead of 709 color space and hence the colors of the imported
files are off (#1852977)

Other users have reported having trouble with VOB files from DVD recorders. Properly authored DVDs work.
Where did you get the VOB files that won't work for you?
-Jeff

Premiere Pro CS4 added contrast H.264 preview files

Similar Messages

Maybe you are looking for