Premiere Pro CS4 Setup won't open

Ok, so I searched and couldn't find anyone with a similar problem: I just downloaded the trial version for Premiere Pro CS4 on Adobe website, but the setup file won't open. I'm on Mac OS X 10.6 (Snow Leopard), 2.8 GHz Intel Core 2 Duo, 4GB RAM, more than 10GB of available disk space; meeting all the system requirements. I can open and browse the .DMG, but when I open the Setup, its icon briefly appears on the Dock, then disappears.
Does anyone know what I should to do fix this?? Many thanks in advance!!

I formatted my HDD, did a clean instalation of Snow Leopard, opened the setup... and it worked just fine!!
That is great news, and thanks for reporting.
Now, there have been some stated issues with Encore and Snow Leopard. If you plan on using Encore for authoring, you might want to pop into the Encore forum and look around. Do not recall the issues, or any resolutions, but there were some issues.
Good luck,
Hunt

Similar Messages

Premiere Pro 4 File Won't Open

Hi all
I have an adobe premiere pro file that won't open. When I double click on it, the load project bar gets to about four fiths of the way, then it just stops. The last time I saved the file, I saved it to my computer, then I saved it to a portable hard drive to back it up (around four minutes later). Both versions of the file won't open. The previous file will open, but I have done 30 hours more work since then (on the new file). I thought it was enough to be saving every few minutes, saving back ups to a portable hard drive... I also have a raid 1 configuration! I was never expecting this. When I leave the Premiere Pro on the Load Project screen, it stays there for hours.
If anyone has any ideas I would greatly appreciate it.
-Linus

Hi John
Thanks for getting back to me. I just looked in autosave. The file that won't open was last saved at 11:02pm on the 16th. There was an autosave project at 10.25pm on the 16th, and that wouldn't open either (it crashes at exactly the same place as the other one). However, there was an autosave file at 6:17pm on the 16th that would open. Curious though, it doesn't seem to have a lot of the changes I thought I had made by this time. It seems to be earlier than this (although perhaps my memory isn't serving me correctly). Should there be more autosaves that this? I had the program open pretty much that whole time, and nothing between 6:17 and 10:25.
Anyway, that's a start! Something must have happened between 6.17pm and 10.25pm that'd made the file go kaput. I would love to know what, so I can avoid this happening again. First things first though, it'd be fantastic to get the file that isn't opening working.
Thanks for your swift response too, Jim. I opened PP and tried to open the file from the interface. The load project bar stopped at the same place. I can open other projects fine. As to your last suggestion, I created a new project, and went to File/Import then clicked on the file in question. It started importing, then the progress bar froze at exactly the same place. I'm not sure if I did this correctly. Is there another way to import a PP file into an existing PP?
Thanks again for your time. It's just nice to speak to someone about this because I really freaked out when it happened.
-Linus

Adobe Premiere Pro 2.0 won't open!

Please help! I have a very old labtop with Adobe Premiere Pro 2.0 on it. My labtop was running out of disk space, so I opened the "Preview" folder of Adobe and deleted all the old files. Now Adobe Premier Pro 2.0 won't open. I get the message:
Runtime Error!
Program: ...iles/Adobe/Adobe Premiere Pro 2.0//Adobe Premiere Pro.exe
This application has requested the Runtime to terminate in an unusual way.
Please contact the support team for more information.
Adobe won't support this program via the phone anymore. Please help!

Wrong forum... you need http://forums.adobe.com/community/premiere/premierepro_previous

Premiere Pro CS5.5 Won't Open - Mac

At first I had problems with AE not opening (hanging at "Initializing Media Core") and the dynamic link to some of the composiitons in my PP project, so I called support. I spent an hour and a half with a lady controlling my computer, and my AE problem seemed to disappear. We hung up, and then I opened my PP project again, and the dynamic link 'started' to work, but then PP randomly shut down. And now I have a PP problem...
I tried reopening and it loaded the project, glitched a little bit on the screen, then it said "Sorry a serious error has occured that requires Adobe Premiere Pro to shut down. We will attempt to save your current project." Now I get it EVERY time I open a project.
So I called support again, and after spending 3 hours with a guy, he told me I had to create a new user account and migrate all of my information there, but he said he could offer me no assistance in this area. I must find out for myself. So I followed the instructions here.
"pick a short user name for your new account. then run the following terminal commands
sudo mkdir /users/newshortname
sudo ditto ~ /users/newshortname
You'll have to enter your admin password (which you won't see) after the first command. that's normal. This will copy your current home directory to /users/newshortname. Then go to system preferences->accounts and create a new account with the short name newshortname. You'll get a popup saying that a home directory by that name already exists and asking if you want to use it. say yes."
As I figured (after waiting a day for all of my files and preferences to transfer to the new account) I had the same problem. I've tried deactivating, re-installing, removing the media core and then putting it back (with the help of Adobe support), and nothing is working. I'm running Mac OS X 10.6.8.
Someone, please offer some assistance. I have been out of commision from editing for three days now, and I have a bunch of deadlines coming up.
HELP ME!

Hi Vinay,
1. I am using third party plug ins, and I understand that might be causing an issue, but I've also tried opening a new project with nothing in it at all, and that won't open.
2. Premiere Pro quits after the project loading bar or after I create a new project.
3. I used a lot of files! mov, mts, psd, ai, png, jpeg, and AE compositions through dynamic link.
4. The project has about five sequences. They range from 1 minute to 4 minutes.
Thanks!

Premiere Pro CC 2014 won't open "because it is not responding".

When trying to open Premiere Pro CC 2014 it won't open and I get the message "You can't open the application "Adobe Premiere Pro CC 2014" because it is not responding.
I've done my updates, uninstalled it, reinstalled it. Even did a clean re-install of the Yosemite OS but nothing. It opens up fine on my laptop.
I'm on an iMac 27, late 2009.
2.66 GHz Intel Core i5
16GB RAM
ATI Radeon HD 4850 512 MB
Really need this to work asap.
Thanks.
/Carl

A variety of issues can cause PPRO to crash on launch. Here are some of them:
a problem with the Preferences, or some other pref-related file in the Profile-<USERNAME> bin.
the graphics driver
having an integrated graphics chip as well as a graphics card. Disabling the integrated chip often fixes this.
having Nvidia CUDA drivers installed on a system with an AMD card
third-party plug-ins
a problem with the cache files.
a problem with the project file (if you're loading a project...)
folders that Premiere writes to being set to read-only
the user not having administrator rights
a conflict/incompatibility with some OS setting
a problem on the licensing/authentication side.
The fact that you've done a fresh installation of 10.10 eliminates some of those possibilities.
After a crash on launch, does a dialog box eventually come up prompting you to submit a crash report to either Adobe or Apple? If so, please click "information" or the like to access the crash log and copy/paste the report here.

Direct link from Premiere Pro to Speedgrade won't open and stops at the post processing bar.

I've just installed the new version of Speedgrade and every time I try to open a direct link from Premiere Pro to Speedgrade, it opens and starts to load, but when the post processing bar appears it stops there and doesn't open, I've gone back to the original versions of both programmes and that same thing happens, HLEP!

Hi Vinay,
1. I am using third party plug ins, and I understand that might be causing an issue, but I've also tried opening a new project with nothing in it at all, and that won't open.
2. Premiere Pro quits after the project loading bar or after I create a new project.
3. I used a lot of files! mov, mts, psd, ai, png, jpeg, and AE compositions through dynamic link.
4. The project has about five sequences. They range from 1 minute to 4 minutes.
Thanks!

Premiere Pro CC project won't open on another computer

Hi, I am working at a Premiere Pro CC project with a collaborators.
We share and external hard drive with the footage structure, do some edits then pass the hard drive to the other person and so on.
Recently, after passing the hard drive, my collaborators can no longer open the Premiere Pro project on her computer.
Does anybody know what the problem is?
Thanks

What exactly are the symptoms? What happens when they try an open the project?

Premiere pro free trail won't open

The adobe cloud premiere pro free trail is install on my computer but it won't open

More information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840

Premiere Pro cs6 projects won't open

I'm working on multiple Mac systems, 2 Mac Pro (3 years old) desktops and one fairly new macbook pro. Recently, I've run into a very serious problem. My projects that I've been working on for days, will suddenly not open any more - on any of my machines. This is happening with different projects on different machines. Whenever I try to open them, I get the never ending stopwatch icon and nothing happens from there. Last night, I opened a fairly new project, worked on it for about 2.5 hours, then came in this morning and tried to launch it on the same machine and it wouldn't open.
As I said, this is happening with completely different projects on completely different machines. I'm losing my mind. I've tried trashing my prefs by holding shift-option down on launch, this hasn't worked. Has anyone seen this before?
Brett Nicoletti

I am Windows, but have some Mac links that may help
Enable Mac Root User https://forums.adobe.com/thread/1156604
-more Root User http://forums.adobe.com/thread/879931
-and more root user http://forums.adobe.com/thread/940869?tstart=0
Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
Mac 10.9.3 and CS6 https://forums.adobe.com/thread/1480238
Troubleshooting guide for Mac freeze
http://helpx.adobe.com/x-productkb/global/troubleshoot-system-errors-freezes-mac.html
http://blogs.adobe.com/aftereffects/2011/02/troubleshooting-quicktime-errors-with-after-ef fects.html
External speakers stop playback http://forums.adobe.com/thread/1370072?tstart=0
OSX Crash http://helpx.adobe.com/creative-cloud/kb/ame-premiere-crash-launch-export.html

Premiere Pro CC project won't open.

The last back up was 6 days ago. The error message says 'an unknown error occurred while opening the project'. So I looked on here but the best advice was to try to import the project into a new project. I tried this but it didn't work. I then clicked on import a sequence and the bar got about a fifth across before halting indefinitely, so that didn't work either. What went wrong? Can it be fixed?

I am trying to reconstruct using the rendered video but I can't get them in a new sequence in order now!

Adobe Premiere Pro CC 2014 Will Not Open But other App like Lightroom will..

Hello,
Can someone please help with with this problem!?
I have just purchased Adobe Creative Student Cloud (the full set) and my Adobe Premiere Pro CC 2014 won't open when clicked on... however other App like Lightroom, indesign etc will... Can some explain why this is and help me load it up so i can start editing!
Thank you,
George

if you failed to reset the preferences, do it manually - Adobe Premiere Pro Help | Preferences
also, make sure your graphics card drivers are up-to-date.

Premiere Pro CS4 won't open. Receiving Error message...

When I try to open Premiere Pro CS4, the program doesn't open but I receive the Error message below instead:
LoadLibraryEx Startup.dll failed with error 999: Error performing inpage operation.
Does anyone know what this means or how I can fix it aside from reinstalling the software? Thanks.
Yoey

Thank you for that info. I actually just reinstalled the program only to have another error occur. Apparently that when you install Premier, you must also install a bunch of other perhipheral software including After Effects Third Party Content. There was an error with that but Premiere worked fine, but After Effects wouldn't start. Then I checked for updates and everything seems to be working fine. Not even sure if that Third Party Content is working because my laptop is not powerful enough to run After Effects effectively anyways. But thanks again for your response. I will defenitely keep that in mind if I ever have any more problems.

File failure with Adobe Dynamic link when opening a *.prproj file - Premiere Pro CS4

Hi everyone,
I'm trying to open a Premiere Pro CS4 file (*.prproj) but the bar that appears sating 'Opening file' (or similar) gets stopped before finishing to load the file.
I tryed to export some sequences using Adobe Media Encoder CS4 (I wanted to rescue my work), but when I have to select the sequences that I want to export, it says that there is a problem with Adobe Dynamic Link.
Any idea for rescue the file?
Thanks!
Jordi

function(){return A.apply(null,[this].concat($A(arguments)))}
enrage222 wrote:
which question? the 9 dots?
Go directly to http://premierepro.wikia.com/wiki/Troubleshooting
Read and follow all instructions for troubleshooting
Report back with the answers to the questions at the end of that link

I get an error when I open Premiere Pro (CS4)

Hi guys i hope you can help me :)
When i open Premiere Pro the Windows
opens normally and starts loading the
program parts. then i get the following
error message:
Premiere Pro has encountered an error. [..\..\Src\ImporterProcessClient.cpp-127]
i don't know why ?? please help me ;)
greets mark

Eddie, Thank you for your update. When it crashes, I did submitted the crash Report to Adobe, so, you should have all the information you need. See below the copy of the crash report. <?xml version="1.0"?> <!DOCTYPE crashreport SYSTEM "AdobeCrashReporter.dtd"> <crashreport version="1.1" crVersion="3.0.20080806" applicationName="Adobe Premiere Pro CS4" applicationVersion="4. 0. 1. 0" build="unknown"> <time year="2008" month="12" day="21" hour="18" minute="38" second="3"/> <user guid="c118a540-9d5f-4415-ab8b-b1c6e3906423"/> <system platform="windows" osversion="6.0.6001 SP 1.0" applicationlanguage="Language Neutral" userlanguage="en_US" oslanguage="en_US" ram="3325" machine="Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz" model="x86 Family 6 Model 15 Stepping 6" cpuCount="2" cpuFreq="2330 MHz" busFreq="" locale="English (United States)"/> <crash exception="EXCEPTION_BREAKPOINT" instruction="0x00c2dd10"> <backtrace crashedThread="0"> <thread index="0"> <stackStatement index="0" address="0x00c2dd10" symbolname="dvacore::debug::DVA_DebugBreak"/> <stackStatement index="1" address="0x00cb197a" symbolname="dvacore::utility::ThreadSafeMessageDialog"/> </thread> </backtrace> <registerSet> <register name="EAX" value="0x00000000"/> <register name="EBX" value="0x00000000"/> <register name="ECX" value="0x00000000"/> <register name="EDX" value="0x00000000"/> <register name="ESI" value="0x00cb177e"/> <register name="EDI" value="0x00000000"/> <register name="ESP" value="0x0012f2a0"/> <register name="EBP" value="0x00000000"/> <register name="EIP" value="0x00cb197a"/> <register name="EFL" value="0x00000246"/> </registerSet> <binaryImageSet> <binaryImage start="0x00400000" end="0x004fa000" type="__TEXT" path="C:\Program Files\Adobe\Adobe Premiere Pro CS4\Adobe Premiere Pro.exe"/> <binaryImage start="0x77910000" end="0x77a37000" type="__TEXT" path="C:\Windows\System32\ntdll.dll"/> <binaryImage start="0x762e0000" end="0x763bb000" type="__TEXT" path="C:\Windows\System32\kernel32.dll"/> <binaryImage start="0x10000000" end="0x10010000" type="__TEXT" path="C:\Program Files\Adobe\Adobe Premiere Pro CS4\CrashReporter.dll"/> <binaryImage start="0x718b0000" end="0x7198c000" type="__TEXT" path="C:\Windows\System32\dbghelp.dll"/> <binaryImage start="0x768a0000" end="0x7694a000" type="__TEXT" path="C:\Windows\System32\msvcrt.dll"/> <binaryImage start="0x77710000" end="0x777d6000" type="__TEXT" path="C:\Windows\System32\advapi32.dll"/> <binaryImage start="0x767d0000" end="0x76892000" type="__TEXT" path="C:\Windows\System32\rpcrt4.dll"/> <binaryImage start="0x75850000" end="0x75858000" type="__TEXT" path="C:\Windows\System32\version.dll"/> <binaryImage start="0x00170000" end="0x0017f000" type="__TEXT" path="C:\Program Files\Adobe\Adobe Premiere Pro CS4\LogUtils.dll"/> <binaryImage start="0x76ab0000" end="0x775c0000" type="__TEXT" path="C:\Windows\System32\shell32.dll"/> <binaryImage start="0x763c0000" end="0x7640b000" type="__TEXT" path="C:\Windows\System32\gdi32.dll"/> <binaryImage start="0x77ad0000" end="0x77b6d000" type="__TEXT" path="C:\Windows\System32\user32.dll"/> <binaryImage start="0x76280000" end="0x762d8000" type="__TEXT" path="C:\Windows\System32\shlwapi.dll"/> <binaryImage start="0x775c0000" end="0x77704000" type="__TEXT" path="C:\Windows\System32\ole32.dll"/> <binaryImage start="0x728e0000" end="0x7297b000" type="__TEXT" path="C:\Windows\winsxs\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.143 4_none_d08b6002442c891f\msvcr80.dll"/> <binaryImage start="0x72660000" end="0x726e7000" type="__TEXT" path="C:\Windows\winsxs\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.143 4_none_d08b6002442c891f\msvcp80.dll"/> <binaryImage start="0x00c00000" end="0x00d55000" type="__TEXT" path="C:\Program Files\Adobe\Adobe Premiere Pro CS4\dvacore.dll"/> <binaryImage start="0x769a0000" end="0x76a2d000" type="__TEXT" path="C:\Windows\System32\oleaut32.dll"/> <binaryImage start="0x001a0000" end="0x00229000" type="__TEXT" path="C:\Program Files\Adobe\Adobe Premiere Pro CS4\ASLFoundation.dll"/> <binaryImage start="0x74980000" end="0x74b2b000" type="__TEXT" path="C:\Windows\winsxs\x86_microsoft.windows.gdiplus_6595b64144ccf1df_1.0.60 01.18065_none_9e7abe2ec9c13222\GdiPlus.dll"/> <binaryImage start="0x760f0000" end="0x760f7000" type="__TEXT" path="C:\Windows\System32\psapi.dll"/> <binaryImage start="0x00240000" end="0x00246000" type="__TEXT" path="C:\Program Files\Adobe\Adobe Premiere Pro CS4\PRM.dll"/> <binaryImage start="0x6ef50000" end="0x6ef6e000" type="__TEXT" path="C:\Windows\System32\shimeng.dll"/> <binaryImage start="0x75fc0000" end="0x75fec000" type="__TEXT" path="C:\Windows\System32\apphelp.dll"/> <binaryImage start="0x6de60000" end="0x6dee8000" type="__TEXT" path="C:\Windows\AppPatch\AcLayers.dll"/> <binaryImage start="0x76040000" end="0x7605e000" type="__TEXT" path="C:\Windows\System32\userenv.dll"/> <binaryImage start="0x76020000" end="0x76034000" type="__TEXT" path="C:\Windows\System32\secur32.dll"/> <binaryImage start="0x733b0000" end="0x733f2000" type="__TEXT" path="C:\Windows\System32\winspool.drv"/> <binaryImage start="0x75bf0000" end="0x75c04000" type="__TEXT" path="C:\Windows\System32\mpr.dll"/> <binaryImage start="0x76190000" end="0x761ae000" type="__TEXT" path="C:\Windows\System32\imm32.dll"/> <binaryImage start="0x76700000" end="0x767c8000" type="__TEXT" path="C:\Windows\System32\msctf.dll"/> <binaryImage start="0x77ac0000" end="0x77ac9000" type="__TEXT" path="C:\Windows\System32\lpk.dll"/> <binaryImage start="0x764f0000" end="0x7656d000" type="__TEXT" path="C:\Windows\System32\usp10.dll"/> <binaryImage start="0x74ed0000" end="0x7506e000" type="__TEXT" path="C:\Windows\winsxs\x86_microsoft.windows.common-controls_6595b64144ccf1d f_6.0.6001.18000_none_5cdbaa5a083979cc\comctl32.dll"/> <binaryImage start="0x003c0000" end="0x003d4000" type="__TEXT" path="C:\Program Files\Adobe\Adobe Premiere Pro CS4\Startup.dll"/> <binaryImage start="0x023a0000" end="0x024dc000" type="__TEXT" path="C:\Program Files\Adobe\Adobe Premiere Pro CS4\adobeowl.dll"/> <binaryImage start="0x024e0000" end="0x027e2000" type="__TEXT" path="C:\Program Files\Adobe\Adobe Premiere Pro CS4\UIFramework.dll"/> <binaryImage start="0x027f0000" end="0x028d8000" type="__TEXT" path="C:\Program Files\Adobe\Adobe Premiere Pro CS4\ImageRenderer.dll"/> <binaryImage start="0x7f840000" end="0x7fa07000" type="__TEXT" path="C:\Program Files\Adobe\Adobe Premiere Pro CS4\MCDVD_32.DLL"/> <binaryImage start="0x74800000" end="0x74832000" type="__TEXT" path="C:\Windows\System32\winmm.dll"/> <binaryImage start="0x74720000" end="0x74759000" type="__TEXT" path="C:\Windows\System32\oleacc.dll"/> <binaryImage start="0x76a30000" end="0x76aa3000" type="__TEXT" path="C:\Windows\System32\comdlg32.dll"/> <binaryImage start="0x00f70000" end="0x00f9b000" type="__TEXT" path="C:\Program Files\Adobe\Adobe Premiere Pro CS4\dynamiclinkui.dll"/> <binaryImage start="0x022d0000" end="0x02350000" type="__TEXT" path="C:\Program Files\Adobe\Adobe Premiere Pro CS4\dynamiclink.dll"/> <binaryImage start="0x00fc0000" end="0x00fe1000" type="__TEXT" path="C:\Program Files\Adobe\Adobe Premiere Pro CS4\processcoordinationclient.dll"/> <binaryImage start="0x011f0000" end="0x011f9000" type="__TEXT" path="C:\Program Files\Adobe\Adobe Premiere Pro CS4\proce

Premiere Pro CS4 won't render my sequences

Everytime I send a sequence to Media Encoder, it just sits there. And sits and sits, etc. At the bottom it just says "Loading "Gleaner_Shoot.prproj".
I'm using a 2008 Mac with 8 cores with 16 gigs of ram.
My footage came from the Canon HV20. I have clips at both 24p and 1080i.
I'm setting up my sequences to match the clips I'm placing in them.
One thing of note is I'm really only using 3 looong clips. Since CS4 doesn't do scene detection well. I opted to instead make subclips from the long clips and use those. 2 of them are about 30 minutes long and one is nearly an hour. Could this be the problem?
Thing is, this happens even when I do a 1-minute sequence test.
It even happens when I try to use a test sequence which contains only audio.
I've tried outputting to quicktime and MPEG 2. I was careful to set the export settings to match the sources.
After a long wait, Media Encoder gives up and I get a warning icon in the status column. It says this:
" - Source File: /Users/johnstanowski/Library/Caches/TemporaryItems/FixThrive_1.prproj
- Output File: /Volumes/Data HD/WEBSITES/BREVITY/3d stuff/Fixthrive_1.mov
- Preset Used: Custom
- Video: 720x480, 30 [fps], Progressive, Quality 100
- Audio:
- Bitrate: None
- Encoding Time: 00:01:19
Wed Dec 3 10:46:04 2008 : Encoding Failed
The Operation was interrupted by user
- Source File: /Users/johnstanowski/Library/Caches/TemporaryItems/Thrive2.mov.prproj
- Output File: /Volumes/Data HD/WEBSITES/BREVITY/3d stuff/Thrive2.mov
- Preset Used: Custom
- Video: 720x480, 29.97 [fps], Progressive, Quality 100
- Audio:
- Bitrate: DV/DVCPRO - NTSC
- Encoding Time: 00:00:15
Wed Dec 3 10:50:39 2008 : Encoding Failed
The Operation was interrupted by user
- Source File: /Volumes/Data HD/WEBSITES/BREVITY/3d stuff/_Front Flash/FLASH/SOURCES/BREVITY RENDER READY.mov
- Output File: /Volumes/Data HD/WEBSITES/BREVITY/3d stuff/_Front Flash/FLASH/FLASH FILES/brevity_render_ready.flv
- Preset Used: Custom
- Video: 903x250, Same as source [fps]
- Audio: MPEG Layer III (MP3), 128 [kbps], Stereo
- Bitrate: VBR, 1000.00 [kbps]
- Encoding Time: 00:01:38
Tue Dec 16 16:44:27 2008 : Encoding Failed
The Operation was interrupted by user
- Source File: /Users/johnstanowski/Library/Caches/TemporaryItems/Gleaner_Shoot.prproj
- Output File: /Users/johnstanowski/Desktop/THURDAY.mov
- Preset Used: Custom
- Video:
- Audio:
- Bitrate:
- Encoding Time: 00:11:07
Tue Aug 4 13:19:39 2009 : Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.
I usually use After Effects so I'm not really up on Premiere that much, but I've used it a good bit in the past and never came across this problem.
Any ideas?

Thanks. I hope I've provided enough information below.
Premiere Pro CS4 (just recently upgraded from CS3 where this session was orignally created)
Dell Precision t5400
Intel Xeon E5400 2.33 Ghz
3.25G RAM
XP Pro
Virtual Memory is tweaked per the optimization article on Adobe site:
sytem RAM + 12MB
2 x system RAM
Hardware Acceleration - disabled in display properties
project is 6 min 30 sec
no fancy edits....standard audio/video transitions only:
cross dissolve
additive dissoolve
band wipe
darn door wipe
audio x fade
audio fade out
audio fade in
VT1:
AVI video clips
BMP stills
1 JPG still
VT2:
credits roll at the end over still shot bmp
AT1:
voice over in WAV
using sidekick 4.1 to trigger the compression on AT2
EQ
de-clicker
AT2:
music backing track in MP3
using sidekick 4.1 triggered compression (ducking) from AT1
Using the default PPR4 workspace layout
Very basic edits in a 6 min training video
Using Export>Media>AVI output (compressed) and stereo. My sytem hangs in Media Encoder. I let it sit for 20 minutes before I manually stopped.
Thanks,
Kyle

Premiere Pro CS4 Setup won't open

Similar Messages

Maybe you are looking for