Premiere Pro CS5.5 Upgrade is Downloaded and Installed, but 5.0 Isn't Updating

Hi there. I may be missing something very simple here, but here goes: I already have Premiere Pro CS5 on my system, and I just purchased, downloaded and installed the 5.5 upgrade a little while ago, but CS5 isn't upgrading. It's still opening as Version 5.0.3.
It didn't ask me for my serial number at installation, which made me think it found what it was upgrading, and I've tried restarting, but to no avail.
Any help is much appreciated. Am I missing a step?
Thanks!
Stephen

Hi,
Premiere pro CS5 and Premiere Pro CS5.5 are installed as seperate programs.
So Premiere Pro cs5.5 might have installed as a seperate program.
Check the all program list for the same.
If you face issues, just contact adobe technical support.

Similar Messages

  • Premiere Pro CS5.5.2  will not install after motherboard replacement ?

    Premiere Pro CS5.5.2 will not install after mothboard replacement .It was running correctly for 4 weeks prior to replacement due to AC connection issues and Wireless connectivity.
    Adobe Case No. 183519673, Adobe Technicians (Asia/Pacific) have worked on this issue for over 3 hours with no results after uninstalling and reinstalling.
    Any ideas to fix issue wou;ld be appreciated.

    Also posted to the Hardware section http://forums.adobe.com/message/4634472
    There is a New forum for Download & Install & Setup problems
    http://forums.adobe.com/community/download_install_setup
    Or, call Adobe
    In the US - Adobe Install Problems 800-642-3623
    In the US - Adobe Activation 866-772-3623 Open 24/7
    I suggested providing motherboard brand/model information
    [Additional information from other topic added]

  • I have a Macbook Pro. I updated to 10.9.4 an downloaded the trial for Creative Cloud. It downloaded and installed but will not open. I shut down and tried reinstalling. Same problem.

    I have a Macbook Pro. I updated to 10.9.4 an downloaded the trial for Creative Cloud. It downloaded and installed but will not open. I shut down and tried reinstalling. Same problem.
    Thanks.

    I stumbled upon the solution. In addition to downloading Creative Cloud, I needed to go back to the website and  download trials for the programs I want to use--Photoshop and Lightroom. Once I did that, I was in business. Would save trouble if that was made clear on the download site.
    Thanks

  • Premiere Pro trial won't download and it isn't listed in my creative cloud

    Premiere Pro trial won't download and it isn't listed in my creative cloud. It is frustrating... it says it is downloading but it makes creative cloud pop up and I then can't find it listed . I just want the trial. I have done trouble shooting on cchromeand on my computer.

    See if your machine meets the system requirements for the software.  CC will not list applications that will not work with the system.
    Premiere Pro - http://helpx.adobe.com/premiere-pro/system-requirements.html

  • My business partner signed up for the acrobat xl pro, and added me to the account.  it send me an email to download and install, but after it downloads, nothing happens, can't double click on it to open, it just does nothing on the double click.  I tried

    my business partner signed up for the acrobat xl pro, and added me to the account.  it send me an email to download and install, but after it downloads, nothing happens, can't double click on it to open, it just does nothing on the double click.  I tried to download again, and still same thing.  I am on a mac with latest OS.  Does anyone know what I am doing wrong?

    he is on a pc, we bought a subscription to the license and was told it's 180 a year or 14.99 monthly per user, on the business plan.  So the sales rep on the phone walked us through adding the people who will be added to account who will need a license to use.  the sales rep said that we just need to go to that section and add users and it will email the user a link to download the file and install

  • Pages is saying it has been downloaded and installed but it is not on my Mac Book

    I have just downloaded Maverick and Pages, keynote and numbers are all saying that a new version has been downloaded and installed but they have changed the software I had already been installed, I know this because my ipad3 has had the new upgrades and the icons have changed.
    Can anybody help me please?

    No, the download doesn't change the older Pages 09. The icons on the older pages documents on the Mac changes but not the Pages 09 application. You still have the application in the Application folder.
    What you see on the iPad I can only guess. I don't have an iPad.

  • I had downloaded and installed one of those automatic Windows update and now whenever I try to open my Firefox I get an error message, "Platform version 6.0.2 is not compatible with minVersion 6.0.1 maxVersion 6.0.1

    I had downloaded and installed one of those automatic Windows update and now whenever I try to open my Firefox I get an error message, "Platform version 6.0.2 is not compatible with minVersion >6.0.1 maxVersion <6.0.1

    If you use ZoneAlarm Extreme Security then try to disable Virtualization.
    Do a clean reinstall and delete the Firefox program folder.
    * http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
    *[[/questions/869812]]
    *[[/questions/869951]]

  • I downloaded and installed the: Mac mini EFI Firmware Update 1.6 on my mac mini running 10.8.1, was I correct in doing this ?

    I downloaded and installed the: Mac mini EFI Firmware Update 1.6 on my mac mini running 10.8.1, was I correct in doing this ?
    I didn't see this update come up in "Software Update"
    If I was not meant to install this update, would it cause ANY damage at all to my mac ( this is my second as I dropped the first )
    If I were to re-install ML would this fix any errors that this may have caused ?
    The bottom of the page I link to says:
    Boot ROM or SMC Version Information: MM51.0077.10
    But when I click on "About this Mac" it says:
    Boot ROM Version:          MM51.0077.B10
      SMC Version (system):          1.75f0
    What does the additional "B" mean?
    My mac mini is the Mid 2011 Model.
    I am sorry if I am sounding super paranoid about this, but I don't want to have caused any permanent damage.

    Hello,
    It's somewhere between almost impossible & impossible to install the wrong EFI Update with all the checks it does!
    Mac mini (Mid 2011) with Intel graphics
    Macmini5,1
    MM51.0077.B10 (EFI 1.6)
    Mac mini (Mid 2011) with Radeon graphics
    Macmini5,2
    MM51.0077.B10 (EFI 1.6)
    Mac mini Server (Mid 2011)
    Macmini5,3
    MM51.0077.B10 (EFI 1.6)
    http://support.apple.com/kb/HT1237
    Not sure what the B means.
    If I were to re-install ML would this fix any errors that this may have caused ?
    No, Firmware is unaffected by any OS change or re-install.

  • Updated but no Camera Raw 8.6. Downloaded and installed but still no CR 8.6.?

    Updated but no Camera Raw 8.6. Downloaded and installed but still no CR 8.6.? LR 8.6 wants me to install before sending to PS CC 2014. Any thoughts?

    See if this thread helps you at all:
    Where has Adobe HIDDEN the Camera RAW 8.6 update (again!)?

  • I can't download and install the latest photoshop CC (2014) update. I keep getting installation failed. I work on an imac, OS 10.9.4. Any ideas?

    I can't download and install the latest photoshop CC (2014) update. I keep getting installation failed. I work on an imac, OS 10.9.4. Any ideas?

    All the Adobe CC Updates: The Direct Download Links for Windows | ProDesignTools

  • Moving Premiere Pro CS5.5 to laptop and back to desktop

    Hi,
    I have Adobe Premiere Pro CS5.5 on my desktop computer and I will be travelling for a month in the new year and will need to edit on the go.
    Is there a way to deactivate my license/program on my desktop computer and activate it on my laptop temporarily, and then be able to take it off my laptop and put back onto my desktop computer?
    Or are you only allowed to move the program/license a limited number of times?
    Hope someone can help!
    Thank you,
    - Dannie

    The license allows 2 activations... so just install/activate on your laptop... as long as you have only installed/activated once already

  • Premiere Pro CS5.5 to CS6 and save back to CS5.5

    I was given project in Premiere Pro CS5.5 to work on in CS6, but have to save it back again in CS5.5.
    Is this possible?
    If so. how does one do it?

    The license allows 2 activations... so just install/activate on your laptop... as long as you have only installed/activated once already

  • Premiere Pro CS5 Ignores error code and error_message

    My plugin reports an error when returning from PF_Command_Global_Setup, but Premiere Pro CS5 doesn't display the error message to the user.
    It correctly doesn't load the plug-in, but user's have no clue what happened.
    if (!ok){
    out_data->out_flags |= PF_OutFlag_DISPLAY_ERROR_MESSAGE;
    strcpy(out_data->return_msg,
    "MyPlug-in error\n");err = -1;
    return 
    err;

    I  learned something the hard way...
    Don't every return a -1 when your plug-in is running in Premiere. It makes Adobe Media Loader think your plug-in is bad and it will never try to load it again.
    It was a ***** trying to track this down.
    Oh, and Premiere won't display out_data->return_msg if you have one.

  • Premiere Pro CS5 when recording echos and reverbs- help pls?

    Just purchased Master Suite and when trying to record in Premiere Pro CS5 through headset set up or microphone, all good equipment, I get lots of echos and intense "reverb" I believe... tried changing settings and turning off speakers etc.. with no luck. Any suggestions would be appreciated. FYI, was using Camtasia and had no problems at all.

    Can you tell us all about the acoustics of your studio?
    Also, knowing the make/models of your mics, and how they are set up would be helpful.
    Do you have the output to the speakers active? I would turn this off.
    Do you get the same problems, in other software (per Jim's suggestion), without making any other changes?
    Good luck,
    Hunt

  • Logic Pro x - additional content downloads and installs but it won't show up in my Logic Pro X. Where is the add'l content downloaded and how do I activate on Logic Pro X?

    The additional content downloads and installs, but it won't show up in my Logic Pro X. I cannot find the "Library" folder where this additional content is  downloaded to and can't seem to activate the new loops and instruments in my Logic Pro X (i.e. loops are still greyed out). Any solutions?

    similar problem that I'm hoping revives this thread. Took over 24hrs to dload additional content (after another full day for the actual problem) due to a bad dload rate. so quitted, and relocated closer to my wifi router. Restart, open logic x, Menu bar:  Logic Pro/ Download Additional content ...Tells me i have no internet connection.... Ahh... I do, I'm using it right now! Tried restarting and relaunching. same thing every time.
    Any clues?
    This whole apple upgrade has been so disappointing! All i wanted to do was reinstall logic 9! $2500 later and I'm still struggling. ***!

Maybe you are looking for

  • Database file views not working correctly

    I have recently set up an Access database on my local coldfusion server. When I go to the application panel and go to the 'databases' tab, I can see a list of my databases just fine. The problem is that, when I open the individual tables of a databas

  • Using MM drivers

    Hi, Product:           Java Web Application Operating system:     Linux (Redhat 7.3) Web Server:          Apache Application server:     Tomcat 4.0.4 Database server:     MySQL 3.23.49 Java Architecture:     JSP (presentation) + Java Bean (Business l

  • Not able to connect to wi-fi networks

    Two months ago I bought an iPad mini, I brought it home and the wi-fi worked juts fine, until last week. I went on vacation and the first day at the hotel the wi-fi worked, the next day out of the blue the wi-fi was not working, my computer was and m

  • Spool output of a script

    Dear Could you please help me, how should i spool the output of an sql script to a file; please reply me back with the scripts. Thanks n Regards,

  • Thread 1 cannot allocate new log, sequence 1258

    Hello buddies, I am receiving this message and not sure on how to fix it. Please guide me. Fri Jul 30 22:00:17 2010 Thread 1 advanced to log sequence 1256 (LGWR switch) Current log# 2 seq# 1256 mem# 0: F:\maindb\LOG_02.DBF Fri Jul 30 22:00:36 2010 Th