Premiere Pro CS5.5 -very strange issue with the color tones and Preview-

I deal with a very strange and not usual problem in Premiere Pro CS5.5 (also the version CS5). What I try to do is just a simple color correction. The problem occurs when I try to use Three Way Color Corrector but it happens with Fast Color Corrector also.
When applying the Three-Way Color Correction and without changing anything else (just applying), can be seen in the preview of the soft how sudden changes in color tones. For example, the gray tone becomes a little more green, but also can be seen very easy a change in the other color tones too. In fact even RGB Parade show the same thing. This is very, very strange and unacceptable and saw that it happens when trying to use Colorista II too.
I tried the same thing in Sony Vegas Pro 11 and I downloaded the trial version of Edius 6 to convince me if the same thing happens. Not! In Sony Vegas and Edius everything is working correctly, I have not experienced these problems in the preview's of this 2 others softs.
This issue is very annoying because every possible color correction is based on what we see in the preview and if in this preview the tones are seen altered realize that can not make a decent color correction. So what happens here?!? I uploaded a small video demonstration to see very clearly about what I'm talking. You can see in the next link: http://vimeo.com/35317616

Yes Jim, you're right. No changes in the scopes when one just apply RGB Curves, Fast Color Corrector, RGB Color Corrector or the Three way Color Corrector (last three thanks to the new update 6.03). I already wrote that Adobe team has been able to fix this bug for some of the tools/effects.
But Brightness&Contrast? Change Color? Color Balance? Levels? MBLooks? Twixtor? Colorista II? Does it seem normally that all scopes or just one of them jump when you just apply one of these effects/tools? Not to say that in some situations even the tones change (especially in shadows&midtones).
You say this is something "very minimal". I say it is not so. I don't find normally to make a very detalied CC with Three way Color Corrector and then when applying Colorista/MBLooks, for example, the scopes jump and inclusively some tones may be influenced. And I left clear examples in this topic where you can see that this is possible. I don't know if this is "very minimal" or not, but is really so impossible to edit in Premiere without this "very minimal" issue?!? How can it be possible in other softs (Edius, Media Composer, Vegas Pro) and in Premiere not?!?
One more thing: many of us use intermediate codecs in the editing process. Do you find normally that a AVCHD video have the lumninance at approximately 110IRE, to export it directly to Cineform and then import it in Premiere, and the waveform shows the luminance at 100IRE?!? How is this possible?!? So the AVCHD video have a 110IRE luminance, you convert this video to Cineform without changing anything, and then this Cineform video have the luminance at 100IRE?!? And anyone can verify this example.
So, how can one trust in this soft?!?

Similar Messages

Strange issue with the render percentage indicator

Hello,
I'm getting a strange issue with the FCPX interface - the little gauge that shows the percentage complete a render is - seems to have gone crazy! and is spinning round. I've tried changing project/ restarting fcpx and also restarting the mac!
heres a screen capture of it in action... https://www.dropbox.com/s/o9bwexyuntx0jxd/what.mov

This is traced back to a backup issue.. Hopefully a fix will come with 10.1.4
At this time, the solution is to turn off backup per library...
10.1.3 update "backup" mess

HT1349 Has anyone had issues with the iphone 4s and facebook.

Has anyone had issues with the iphone 4s and facebook. I have downloaded the app and sometimes it will let me log in and then it will log me out and not let me back in. I have deleted and downloaded it several times and nothing is working. HELP!

@razmee: rather unhelpful.
@tata - we're having the same trouble, and the only solution we've found doesn't fix it.
1) uninstall
2) login on PC/MAC and change password
3) reboot iphone
4) install facebook app, reboot again
5) login from iphone.
No joy.
Safari works, but not for the apps.
Of course, it's Facebook that has to fix this.

When I run the program Adobe Premiere Pro CC I at once freezes the computer completely and to make it work I have to restart his, what do I do?

When I run the program Adobe Premiere Pro CC I at once freezes the computer completely and to make it work I have to restart his, what do I do?

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
•What is your exact brand/model graphics adapter (ATI or nVidia or ???)
•What is your exact graphics adapter driver version?
•Have you gone to the vendor web site to check for a newer driver?
•For Windows, do NOT rely on Windows Update to have current driver information
•-you need to go direct to the vendor web site and check updates for yourself
•nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
•ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool

Strange Issue With QIP 7100 STB and Sony Bravia TV

I am having a strange issue with a 27" Sony Bravia Television connected to a Motorola QIP 7100 HD STB.When viewing a non HD channel the television input number display, resolution display, picture mode display and clock come on and off every few seconds. The issue stops when I tune in to an HD channel. If I return to a non HD channel the issue reappears. I am new to FIOS from Directv where I did not experience this. The television is connected to the STB via HDMI. Everything else seems fine except for picture stuttering that I am getting on all of televisions but I'll save that issue for a separate thread. I tried removing the TV remote to no avail and changing the batteries in both the FIOS and TV remote with no success either. This is a very annoying issue and I feel that it must be caused by the STB. I was wondering if anyone experienced anything similar to this and if they were able to correct the issue. I would greatly appreciate any assistance. Thank you and Happy New Year.

It is possible that your Sony doesn't support the mode the STB is set to for SD (some HDMI TV inputs don't support all formats that the STB can output).
Have you tried going to the STB settings menu and under Video Settings played with the various options for 4:3 override? This setting controls the STB output for SD and lets you set 480i, 480p, and OFF (also STRETCH at least on some firmware version). In the OFF setting the STB upconverts your SD to whatever the HD resolution is set for - 1080i or 720p.
Hope that solves your issue.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Default JTree with the colors, sports and food nodes

Hi!
Is there a way to create a JTree with a null root node and no elements without Swing adding the colors, sports and food nodes automatically ?
thanks

Create a new DefaultMutableTreeNode and set it as the root.

Does Premiere Pro CS5 mercury engine work with my imac 27 inch?

I have a 27 inch imac that I bought 4 months ago. Yesterday I upgraded my Creative Suite Production Premium CS4 to CS5. It costs a lot more do to that when you live in Japan (about $300 more). I installed it all and to my disappoinment I can't access PPro's new mercury engine on 64 bit. I read the specs and I thought my computer is capable. Can somebody please tell me if my specs are good? imac is a total disappoinment in that they will not replace any parts!!! I have two very expensive items (imac 27 inch and Adobe CS5). Can I not utilize the mercury engine in P PRo? I will be so sad if that is the case. I've called apple and they say they won't change the graphic card or CPU if those are my problems. Which means I'll have two great things, my new imac and new Adobe soft and I can't use them together.
Anyways, here are my specs. I hope someone can shed some light on this matter for me. I'm hoping I just don't have my PP settings right. Thanks in advance!
Model Name: iMac
Model Identifier: iMac11,1
Processor Name: Intel Core i7
Processor Speed: 2.8 GHz
Number Of Processors: 1
Total Number Of Cores: 4
L2 Cache (per core): 256 KB
L3 Cache: 8 MB
Memory: 16 GB
Processor Interconnect Speed: 4.8 GT/s
ATI Radeon HD 4850

Harm
Thank you kindly for your reply. I figured I was only able to use software only MPE as that is why it is all greyed out in my preferences. I was hoping I had not done something simple that would fix the issue.
So after reading a lot on here about MPE my question is this:
Is soft only MPE 64 bit? Is it still significantly better than my CS4 P.Pro that I had or did I just waste a crap of money on the upgrade? What does soft only MPE have to offer? so far my editing doesn't really seem to be much faster but I haven't put it to test yet. And of course, the render line is always red and not yellow like all those fantastic videos show when they're bragging about how cool Hardware accelerated MPE is.
If feel like I got robbed.
Thanks for your time.
Oh, one more thing. In the near future, "could" a driver update for my ATI Radeon HD 4850 possibly fix this issue? imacs will NOT replace CPU or GPU. For that, I am really, really annoyed. The main reason I bought this computer with the specs was to use Adobe at its best.
Regards,
Kelly

Premiere Pro CS5 - Peak files regenerating in the middle of edit session...

Peak files generate at the beginning of edit session as expected. Then unexpectedly get peak files generating during the edit session. I notice the file names for the peak files generating are the same files that were loaded upon opening the edit session.
What are the potential causes of this?
Intermittent drive failure?? Premiere Pro issue??
Thanks.
Hugh

It happens somtimes for some people. I don't think a finite cause is known at this time. The general recommendation is to use only internal drives, no network storage and no externals.

Premiere Pro Acting Very Strangely

I don't even begin to know how to search the interwebs for the issues I'm having, so I thought I'd post here and see if anyone else is having issues.
I run PP CS6.0.1 via Creative Cloud on a macpro with an NVIDIA Quadro4000 card. Firstly, when I installed the application via Creative Cloud's installer, the 'coreaudiod' bug showed up. Possibly a coincidence, but a strange one at that. Besides the stability issues and the occasional performance bugs, PP has now started doing something even stranger. Now when I launch the app, the startup screen (the dialogue box that displays after the splash screen) now shows up halfway off screen to the right of my monitor. Then if I actually open a project, it ALSO loads up halfway off screen. I can easily get everything back on full screen, but it's still a completely obnoxious problem.
Then, if I leave a render going or simply leave the app up and running over night, I'll come back into work the next morning and suddenly my desktop backgrounds have been completely removed and replaced by a generic gray system background.
I'm at a loss. Has anyone experienced ANY of these things?

At least once a day, restart your computer.
Repair permissions and restart your computer after doing the following:
Updating
Upgrading
Installations
Downloading
Burning

Can you run premiere pro on two different computers with the same log in?

can I install and buy adobe premiere pro and run it on two different computers. Got a desktop at home that I work from and a laptop to bring to clients... So far my trial only want to work on one of the assets?? Many thanks

Hi Dream5,
Please check the below forum discussion.
Creative Cloud multiple computers
Also, check this link for more information and errors.
Error "Activation limit reached" or "Sign in failed" | Adobe products
Regards,
Vinay

Hello. Since I bought my new MacBook Pro I am having issues with the home sharing with Apple TV. I can't access my computer from the Apple Tv, although both home sharing options are on. I can choose Apple Tv as an output from my MAC though.

Can't see my computer from the Apple Tv although home sharing is on in both devices and I can choose Apple Tv as an output from my computer.

The following article(s) may help you.
Understanding Home Sharing
Setting Up Home Sharing On A Computer
General Homesharing Help 3
(75) (10) (35) (-30) (140226)
Welcome to the Apple Community.
The following article(s) may help you.
Troubleshooting Home Sharing
Security Software Issues
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Wifi Diagnostic Software (for Mac users)
You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
When making adjustments to your network for better optimisation, you may find some of the points mentioned on this page helpful.

Issues with the color category in Outlook 2013 mail

We use Microsoft Outlook at work where we have the same email account on a few computers. The color categories have been very useful, especially when more than one person is working with the same email account, to indicate who is supposed to do what and
what have already been dealt with. So when we upgraded our computers to Windows 7 and installed Microsoft Office 2013 it was very frustrating to find out that the color categories dosen't sync between computers.
Does anybody have a solutions to fix this problem?

Categories sync between computers but when you use a shared mailbox, colors aren't shared, except between owners. Each person has to maintain their own color category list for the shared mailbox. There are utilities you can use (or use macros) to
share colors.
Color Category utilities
Diane Poremsky [MVP - Outlook]
Outlook & Exchange Solutions Center
Outlook Tips
Subscribe to Exchange Messaging Outlook weekly newsletter

Issues with the Radio Group and interactive report

Hi,
I have an interactive report that shows customer names and associated revenues... I want my users to be able to filter customer list by Province and by City in a way that when the user select a province then only associated cities show up (driven by a table)... for the filtration I am using 2 Radio Group items (one for Provinces and the other one for Cities)
Everything is working fine, except for the fact that when I select a province (let's say Prov A) and then select a city (let's say City A1) and again when I select another Province (let's say Prov B) I get the list of all cities associated to Prov B + city A1... Not sure why my previous selection of City is showing up with the list of new cities when I change the province... I SHOULD BE ABLE TO REST ALL CITIES WHEN A NEW PROVINCE IS SELECTED
here is the code
For interactive report
select     CUSTOMER_NAME,
     SUM(YTD) AS YTD
from     T_TABLEA
where
(PROVINCE=
CASE
when :P2_PROV = 'All' THEN PROVINCE
ELSE :P2_PROV
END
and
(CITY=
CASE
when :P2_CITY = 'All' THEN CITY
ELSE :P2_CITY
END
GROUP BY CUSTOMER_NAME
For Province Radio Group I am using a static list:
STATIC2:All;All,Alberta;AB,Ontario;ON,Quebec;PQ,British Columbia;BC
For City, I am using a dynamic list using following code:
select 'All', 'All' return from dual
union
select distinct INITCAP(CITY) display_value, CITY return_value
from T_TABLEA
where
Province = :P2_PROV
order by 1
Thanks

Check the session state of items P2_PROV and *:P2_CITY* when the issue occurs and run the LOV query separately with the session state values.
If that too fetches it wrongly, then you would need to change your query.

Has anyone else had issues with the notification led and flash?

the flash will flicker on only the right led then no activity after that, i have tried using it in the camera app and a flashlight app, also i dont see any color/light from the notification led that i have setup in messaging. has anyone else had this issue and solved it?

Try a Power Cycle.. Press and Hold the power button till your Turbo shuts off then re-powers itself after doing this retry using the Led flash with your camera
Here is the Link to the online Manual Via PDF for your Droid Turbo. b33
https://motorola-global-portal.custhelp.com/ci/fattach/get/1021914/1414680708/redirect/1/filename/Droid_Turbo.pdf

Strange issue with Multi-Table LTS and report filters (10g)

Hi,
I am having some troubles with the following scenario:
I have a large flattened table that is being used as both Fact and Dimension in the BMM layer. I also have another table that contains some supplementary measures needed by some reports.
Logical Fact table has an LTS that consists of the 2 tables which are joined on 2 columns (eg, a.col1 = b.col1 and a.col2 = b.col2, etc). The columns used in the join also exist in the logical dimension which uses the same flattened table. I use these columns in my report filters.
I have created some Fact measures, some from each source inside the LTS.
What's happening is that when I am using this model in Answers, the query being generated is applying my filtering conditions to both tables, which seems unnecessary to me since they are joined on these columns.
i.e.,
select *
from table1 a, table2 b
where a.col1 = b.col1
and a.col2 = b.col2
and a.col1 = 'Value 1'
and a.col2 = 'Value 2'
and b.col1 = 'Value 1'
and b.col1 = 'Value 2'
The last two lines in the query above should not be happening. I have not mapped these columns anywhere in the BMM to table2 (other than physical layer join), only to table1.
For clarification, it's not hurting the end results from what I've seen, but it is adding additional filtering to the query that can increase overall cost, which I'm trying to avoid.
Any ideas/suggestions?
Thanks
Edited by: odinsride on Jan 31, 2012 5:03 PM

Hi,
I think this is a known issue. I think that the BI Server pulls in both the tables involved in the LTS for any query (Yes, even if the query has only one column from any of the tables in LTS) and so are the filters.
In this case, what I would suggest you is to create 2 LTS (probably 3). One for each physical table (that are being joined in the LTS) and one for both of them joined (may be inner/left/right) etc.
With this kind of setup, when there are reports for any particular column of this logical table, the BI Server can go and choose the corresponding LTS only. However, if there is a report with columns from both the tables, the BI Server would choose the LTS with the join.
Hope this helps.
Thank you,
Dhar

Premiere Pro CS5.5 -very strange issue with the color tones and Preview-

Similar Messages

Maybe you are looking for