Premiere Pro CS5.5 Won't Play Timeline or Any Media W/ Dual Monitors

Hello ,
I've recently ran into a Problem with Adobe Premiere CS5.5 , I decided to resort to the Support Forums to see if someone has an idea. I've been using Premiere for around a year , i've never had an issue like this before. Its a great editing tool and one that i'd love to continue using in the years to come!
The problem i have , is that when i open up a timeline any timeline that i've created/saved. I press Space which is the Hotkey for play , However it doesn't seem to play the video in either of the two source monitors.
I did a little digging around the internet to see if i could find any solutions , According to one person it may be an issue with the Video Drivers installed on my computer? After reading this , I Updated by Video Drivers however this hasn't fixed my problem? Do i have to enable the drivers or will be laptop automaticly switch to the new Video Drivers.
I usually edit with a second monitor which has been working fine. When i disconnect the monitor from the Laptop , And just edit using my Laptop , It works fine. I'm just wondering if someone has a Solution , Perhaps someone may have had a similar problem than me?
Thanks again! I look forward to finding out what's happening with my Copy of Premiere.
Phil,

Dual laptop video problems
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-link to why http://forums.adobe.com/message/4685328

Similar Messages

After having to reinstall my drive with applications I get a message with Premiere Pro CS5 that it can't find any "capable video play modules" and asks me to "update" my "video display modules". How do I do this? I am using a mid-2010 iMac 27" with 10.7.3

After having to re-install my start-up drive recently I am getting a message with Adobe Premiere Pro CS5 that it can't find any "capable video play modules" and asks me to "update" my "video display modules". I am using a mid-2010 iMac 27" with OSX 10.7.3. How do I do this?

Premiere is an Adobe application and is supported in their forums.
Good luck.
x

Premiere Pro CS4 Won't Play Anything Without Stopping

I have captured HDV and DV footage and Premiere won't play anything. Not in the Source monitor, not in the Timeline/Program Monitor. It won't even play a color matte or bars and tone. It will play for less than a second, stop and the marker will go back to the original starting point.
I am running PPro on a Macbook Core 2 Duo and the footage is fine. I can play it outside of Premiere in other programs but I cannot figure anything out inside of Premiere. Its fully updated and everything.
Can anyone help me?

Hi Rod,
After some hardcore Googling and some nifty search tricks, I found I wasn't the only one. I found this thread where people were having the exact same problem:
http://forums.adobe.com/message/2575099
I did what someone else said where I enabled the root user, logged into that account, loaded Premiere and changed the Audio Hardware to System Default. I then went back to my user account and loaded the project file I was working in. Everything works great now. Thank god.

Premiere Pro CS5 won't import still images correctly

I've about had it with this pile of ****.
Brand new install of Premiere Pro CS5. When attempting to import still images, random images will show up as other images. i.e. in Windows, I'll have the following:
one.jpg (shows up at one.jpg)
two.jpg (shows up at two.jpg)
three.jpg (shows up at three.jpg)
Once I import them into PPro, I get this:
one.jpg (shows up at one.jpg)
two.jpg (shows up at two.jpg)
three.jpg (shows up at one.jpg) <-----
In other words, three.jpg is named three.jpg in PPro, but when I bring it into a sequence, or view it, it displays the image from one.jpg
I've tried clearing the media cache, renaming the images, moving them to different directories/drives. Any suggestions? Or should I just get my money back ffs. Thanks for any help.
-Eric

You've stumbled onto a bug.
Here's the interim fix.
Imported Image Links Problem
And here

Premiere Pro CC14 won't play video in timeline...

I upgraded to Premiere Pro CC14 when it came out. I've since started a new project that is a mix of stills and video with various FX. Before, everything played fine. Now, I open the project and can scrub through the timeline, but I hit play and nothing happens. The "play" button in the program window switches from the "play" symbol to the "stop" symbol, but nothing happens. The program doesn't freeze, but it just sits there, not doing anything. Even opening the source footage to play back in the source monitor, nothing happens. Otherwise, you can open things and they show up, but nothing plays.
Even starting a new project from scratch, importing one piece of video, and trying to play it gets the same result.
Is anyone else having this problem? Is there a solution?
I'm working on a MacBookPro Retina, with 16GB of RAM on Mavericks.

>Before, everything played
Before what? What changed? Did you update anything?
I'm Windows, but some saved Mac links that may (or may not) help
next link says After Effects, but check YOUR permissions !!!
-http://blogs.adobe.com/aftereffects/2014/06/permissions-mac-os-start-adobe-applications.ht ml
-Mac 10.9.4 and OpenCL issue https://forums.adobe.com/thread/1514717
-Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
-more Mac 10.9.3 https://forums.adobe.com/thread/1491469
-and https://forums.adobe.com/thread/1507936

Premiere Pro CS6 won't play imported files even after changing format, etc?

Camera: Canon Legria HFM41
Video file format: MTS (1920 x 1080)
For the past few days I've been trying to understand why my video files won't play in Premiere, I'll import them, and when I press play the audio will work, but the video will play smoothly for only a few seconds then stop, skipping frames/slowing the speed of the video - I've read a lot of these forums on similar issues, then I tried converting the format to avi/mp4 and they still won't play smoothly when importing to Premiere Pro.. Does anyone know what I may be doing wrong/how to solve this.. Thank you!
Shanna

More information needed for someone to help... click these links and provide the
requested information
-http://forums.adobe.com/message/4200840
-http://forums.adobe.com/thread/416679
-http://forums.adobe.com/thread/419406

Premiere Pro CS5 won't import mov file?

Mac Mini OSX 10.6.8 2.4GHz Duo Core Intel 8GB RAM: Quicktime 10.0(128)
I have serveral MOV files that a Camera Crew shot raw footage then recaptured to MOV for me but now I found out that I can't import these files into Premiere CS5, I get a codec miss or unavailable error. I can't even play this MOV file in QT, it says I need a codec. I don't have Final Cut Pro or iLife. What is the codec I need and where can I get the codec to Import my MOV files into Premiere Pro? Or is there a way for me to recapture these files?
Here's a screenshot of the MOV file info. Thanks for any help, I'm new to Premiere

You may have been given video encoded with the Apple ProRes codec. Apple provides free decoders you can install that may be able to help you out.
http://support.apple.com/downloads/Apple_ProRes_QuickTime_Decoder_1_0_for_Windows
http://support.apple.com/downloads/Apple_ProRes_QuickTime_Decoder_1_0_for_Mac
If these don't work, you video may be encoded with an Avid codec. Avid has their full range of codecs available for free. What's nice is that you can both read and record with them.
http://avid.custkb.com/avid/app/selfservice/search.jsp?DocId=392959&ssdFilterCommunity15=1 408&ssdFilterCommunity13=0&ssdFilterCommunity11=0&ssdFilterCommunity10=368&ssdFilter_Searc hKeyWord=codecs&page=1&ssdSearchOperator=0&ssdFilterCommunity3=0&Hilite=codecs
Hope this helps.

Premiere Pro CC won't play audio from video file

I've been trying to edit videos recorded with Bandicam in Premiere Pro CC. The video file itself is fine, when I play it in Windows Media Player it all checks out, but once I get it into a sequence in Premiere Pro CC despite it showing the audio track, and turning the volume to max, there's no sound! How do I get it to pick up the audio that I KNOW is there?

Bandicam read #10 http://forums.adobe.com/thread/954394 for possible hellp

Premiere Pro CS5 won't Render. Freezes for 1-2 minutes when I try to edit the timeline.. Help!

Hi Guys
I'm new to this, but in desperate need of help. Thought i'd give it a shot and let you know what my problem is!
Basically i'm editing a dance concert which is approx 2 hours long. I'm running a late 2011 model iMac w/ i7 Quadcore and 16GB of RAM.
Using Sony XDCAM EX 1080p footage (2 cameras). Everything was going so well until I rendered (not export) the footage overnight. It only rendered less than half of the footage and won't allow me to render anymore. Doesn't even show the details of the amount of frames.. estimated time etc.
Heres a screen shot -
I checked my hard drive space and there's 150 GB left so there's more than enough for it render.
Another problem is that any editing i do to the timeline whether it's trimming, moving, copying etc. It just lags / freezes for about 1-2 minutes (has the loading Icon) then goes back to normal.
Before I did the rendering last night, everything was fine. I was able to edit very smoothly without any lag or freezing. First time i've encountered this. I did the same production last year using the same cameras, file format and software version and it was fine.
Any help would be greatly appreciated!
Kind regards,
Jeremy

Remove the gaps in your timeline or fill the gaps with black clips and try again.

Premiere pro cs6 won't play

I have a 3GHz 8 Core Intel Xeon e5 Mac Pro running 10.9.5.
My Premiere cs6 will not play the time line. I hit space bar and also used the play button pin the Program side and it changes to a square (stop)symbol but the playhead doesn't move. I can get the symbol to change back when I move the playhead with my mouse.
I am working with 720p footage. Quicktime prores LT

Hi,
I suspect something is wrong with the Audio Hardware settings. Do you remember connecting any other audio device to the computer? (Such as headphones or something else)
If not, try to reset the preferences for Premiere and see if that helps
Thanks,
Rameez

CS4 Premiere Pro Clips Won't Play in Source Monitor/Program Monitor

I can't get clips to play in source monitor/program monitor/preview pane in Pr Pro. I have spent hours looking through the forums to try and find a fix and I have troubleshot the following.....
1. Codecs are not broken... or seem to be working according to Sherlock
2. Video and audio drivers up to date
3. Unistalled and re-install Pr Pro then updated via updater
Here is the funny thing...
In Encore, OnLocation, and other Suite program the play functionality works just fine....the only one it doesn't is Pr Pro.
Question:
Is the source code to playback video in Pr different then the other suite programs or am I just making a trivial mistake in Pr?
Sorry for the novice question but I am about to give up and have no where to turn.
Hardware Specs
CPU 3.6 GHz
HD 1TB 7200 RPM
RAM 2 MB (is this my issue?)
Video: Open GL

Number of issues here:
1. Your system does not meet minimum requirements.
2. Your CPU, disks, memory are not enough for anything other than DV.
3. What video camera was used with what codec on what OS with which version of PR. etc.
Some suggestions... and answer at least the 16 questions at the end of the Wiki article.

Premiere Pro CC won't play my Flash files

In older versions of Premiere (CS6), I was able to play Flash flv files in my movie sequence. I would download the flv files from iStock as comps and play them in the movie as placeholders until I was ready to purchase them. They no longer play in Premiere CC. What happened and how can I get around this without using an old version of Premiere?
Thanks!!!

Support for importing and exporting Flash files has been removed. Can't import FLV files

How to set your playback in Premiere Pro CS5.5 with Tascum 144 Audio Interface?

I have an Audio Interface Tascum 144 and i want Premiere Pro CS5.5 to Play it from my tascum, except my computer speakers how can i change this setting?

Go into the PPRO Preferences under Audio... In there select the TASCAM interface...

Premiere Pro CS5 version 5.0.0 freeze on startup screen

MacPro4,1 Quad-Core Intel Xeon
Processor Speed: 2.26 GHz
Number of Processors: 2
Total Number of Cores: 8
MacOSX 10.7.5
L2 Cache (per Core): 256 KB
L3 Cache (per Processor): 8 MB
Memory 26 GB 1066 MHz DDR3 ECC
Graphics ATI Radeon HD 4870 512 MB
Processor Interconnect Speed: 5.86 GT/s
Boot ROM Version: MP41.0081.B08
Premiere Pro CS5 version 5.0.0
When starting app, the splash screen shows the items that are loading.
when it gets to 'loading exported quicktimehost.bundle.' It stops and freezes every time.
I can't get past this point. All i can do is force quit.
Premiere Pro CS5 loads fine only MacBookPro.
Any help is appreciated.
Paul

Thanks for your prompt reply, John-- and for NOT simply advising me to spend my kid's tuition on more of your company's products...
Actually, I had tried the "Run as Administrator" option already, having found it in one of those other threads;
there was no change in the sequence described above.
I decided to try another possible solution which I read about in one of those other threads: opening Premiere from a different account.
Incredibly, it WORKED-- sort of...
I got a couple of popups advising me that missing codecs had to be installed-- and upon completion, Premiere opened!
Here's an interesting note: the last file to load was still "SolidComposite.AEX"-- and the "White Screen" I kept seeing was Premiere opening normally. The next thing that displayed was the normal dialog box "Open/New Project"-- I entered a new project name, and Premiere started normally. I even added a few video files as a test... all opened normally.
I returned to the Admin account to see if the fix was in here, too;
but clearly the war wasn't over, over here...
It now appears that some personal setting in the Admin account is causing Premiere to close itself;
I've been reading about the layered security measures embedded into Windows 8-- I'm suspecting the conflict lies there...
I ran the Windows Troubleshooter & got this:
both MS & Adobe confirm that CS3 is fully compatible--here's my sytem info:
Since I seem to have established a fall-back position that lets me use Premiere, my crisis becomes a mere conundrum;
but I know this is gonna gnaw at me anyway, & I'm hoping that this new information might suggest further troubleshooting options to someone who understands the Adobe software and/or the Windows software better than I do!
Speaking as someone who has found many solutions on forums like this over the years, I assure you:
for every person whose post you reply to, there are many more whom you will never know you have helped!!!

Premiere Pro CS5 Scripting Support?

Does Premiere Pro CS5 support scripting through extendscript or any other scripting language? I see it as a target application in the extendscript toolkit, but i don't see a place within Premiere Pro to run scripts.
Thanks,
Devin

You can scripting in Premiere with extended script, but it looks that it is not officialy supported. No manual or using example etc I hope that it will be soon.

Premiere Pro CS5.5 Won't Play Timeline or Any Media W/ Dual Monitors

Similar Messages

Maybe you are looking for