Premiere Pro CS5 Crashes during playback.

Hey,
I was doing some video editing the other day and when I tried to play back my work via the program monitor, after less than 2 seconds of playback, Premiere crashed. I have tried updating, but to no avail.
System Specs:
Intel Quad Core Q8400 @ 2.66GHz
8GB of DDR2-800 RAM
80GB HDD (Windows OS drive and some CS5 files)
1TB HDD (Footage location & Premiere Pro and the rest of the CS5 program files)
2 x ATi Radeon HD 5750 (no crossfire)
4 monitors.
64-bit Windows 7 Ultimate
Windows Error Reporting report:
Problem signature:
  Problem Event Name: APPCRASH
  Application Name: Adobe Premiere Pro.exe
  Application Version: 5.0.1.0
  Application Timestamp: 4bf119d2
  Fault Module Name: Display.dll
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 4bf0e0a6
  Exception Code: c0000005
  Exception Offset: 0000000000076178
  OS Version: 6.1.7600.2.0.0.256.1
  Locale ID: 3081
  Additional Information 1: 7113
  Additional Information 2: 7113dc2716522a4a2de374964462f9ff
  Additional Information 3: a6ba
  Additional Information 4: a6ba96588ee3a3a2c697d7f9d3d52b05
Any ideas? Is it just me or does it seem like "Display.dll" has something to do with my quadruple monitor setup...?

Any ideas? Is it just me or does it seem like "Display.dll" has something to do with my quadruple monitor setup...?
This seems plausible. That's an Adobe file, and I'm sure its related to exactly what its name implies. Check that you have the latest ATI Catalyst drivers (they're updated monthly), and if that doesn't work, you might try uninstalling and removing one of the cards from the system--that's likely the cause but unfortunately, you'll have to go to those measures in order to test that theory.

Similar Messages

  • Premiere Pro CS5 Crashing on Playback

    I just installed Premiere Pro.  Premiere starts up just fine, imports footage fine, etc. I can drop footage into the source monitor and scrub through it fine. However, as soon as I tap spacebar (or hit play), the program crashes. I can drag footage into the timeline, but the program crashes when I try to play there as well. Sometimes a few seconds of the audio can be heard before crashing, but it crashes every time. I've tried to diagnose the issue (hours of Googling and searching these forums, uninstalling codecs, etc.)
    I'm trying to edit .MOV footage from a Canon T2i. I'm under the impression that CS5 can handle .MOV natively.
    My video card is weak and outdated, and I was expecting the video to lag a little bit, but not to crash the program completely.
    Q6600 2.4ghz quad-core
    1.5tb 7200rpm, 250gb 7200rpm (for scratch disks)
    6gb ram
    Windows 7 64bit
    Nvidia 8400gs with updated drivers
    Any thoughts?
    Thanks

    I'm guessing the conflict exists between Premiere Pro and my junky video card. I don't have alot of money to put into the machine, but I'm looking at a an Nvidia Gt 440 card that supports CUDA.  Is it possible that this will help my problem?
    Well, I don't think that's probably the case--at least, not the card itself. There are (likely) plenty of people using the same or a similar card, or even ATI cards without this issue. You mentioned you updated the drivers--did you get the latest from Nvidia or from the card manufacturer? Also, have you tried updating your audio drivers? Odd as it may seem, out of date audio drivers have been the source of bizarre playback issues, though usually not crashing issues.
    Spending more money on a card that isn't officially supported for hardware MPE is probably not the best move right now; you're certainly welcome to try that, but I wouldn't recommend it.
    What about installing additional codecs? If not, is there a free codec I could convert the H.264 clips to that would edit better with Premiere? The native support for files from my T2i was one primary reason for the upgrade to CS5.
    No, don't install additional codecs. You can convert the MOVs to something like DV AVI if you want (even AME will do this), but we still haven't established what the cause of the crash is. Seeing how you had crashes with other clips (you didn't mention what the AVIs are from), I doubt that it is something specific to the files and format of them.
    Do you receive an error message of any sort? Or does Premiere just go *poof*?

  • Premiere Pro CS5 crashes when clock wipe transition is applied

    Hi,
    I applied a transition "CLOCK WIPE" and when i change any parameter within the transistion then Premiere Pro CS5 crashes.
    What I have tested is that only happens when the mercury playback engine is turned on.

    Adobe Feature Request/Bug Report Form

  • Premiere Pro CS5 crash when adjusting audio gain

    Premiere Pro CS5 crash when adjusting audio gain
    The same on another workstations.
    Have any idea?

    Hi Dennis,
    I just had a go and can reproduce the problem straight away too.
    Created a new project then a new XDCAM EX 1080p25 sequence. Imported a short Sony PMW-350 clip. Dragging it straight to the timeline and then setting audio gain is OK (Source channel mapping preferences set to mono).
    However, if I Modify - Audio Channels and then set track format as stereo or mono as stereo and then drag the clip to the timeline and right click - gain, Premiere crashes about 1/2 to 1 second after the audio gain dialogue box appears. Error log below if it's useful.
    Asus Rampage III extreme
    Intel i7 980x @ 3.33GHz
    24Gb ram
    Windows 7 64 bit
    Using onboard sound - Realtek HD 6.0.1.6037
    Incidentally, I tried with both the default Windows 7 audio drivers and then the Realtek HD drivers installed (I'd previously forgotten to install the Realtek driver when I built the PC)
    Log Name:      Application
    Source:        Application Error
    Date:          12/08/2010 14:28:51
    Event ID:      1000
    Task Category: (100)
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:     
    Description:
    Faulting application name: Adobe Premiere Pro.exe, version: 5.0.1.0, time stamp: 0x4bf119d2
    Faulting module name: MSVCR90.dll, version: 9.0.30729.4926, time stamp: 0x4a1750b0
    Exception code: 0xc0000005
    Fault offset: 0x000000000001dfcd
    Faulting process id: 0x16ec
    Faulting application start time: 0x01cb3a21ad8357e4
    Faulting application path: C:\Program Files\Adobe\Adobe Premiere Pro CS5\Adobe Premiere Pro.exe
    Faulting module path: C:\Windows\WinSxS\amd64_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.4926_none_08e1a05ba 83fe554\MSVCR90.dll
    Report Id: 8b5dda37-a615-11df-8de4-20cf3011131b
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Application Error" />
        <EventID Qualifiers="0">1000</EventID>
        <Level>2</Level>
        <Task>100</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2010-08-12T13:28:51.000000000Z" />
        <EventRecordID>2401</EventRecordID>
        <Channel>Application</Channel>
        <Computer></Computer>
        <Security />
      </System>
      <EventData>
        <Data>Adobe Premiere Pro.exe</Data>
        <Data>5.0.1.0</Data>
        <Data>4bf119d2</Data>
        <Data>MSVCR90.dll</Data>
        <Data>9.0.30729.4926</Data>
        <Data>4a1750b0</Data>
        <Data>c0000005</Data>
        <Data>000000000001dfcd</Data>
        <Data>16ec</Data>
        <Data>01cb3a21ad8357e4</Data>
        <Data>C:\Program Files\Adobe\Adobe Premiere Pro CS5\Adobe Premiere Pro.exe</Data>
        <Data>C:\Windows\WinSxS\amd64_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.4926_none_08e 1a05ba83fe554\MSVCR90.dll</Data>
        <Data>8b5dda37-a615-11df-8de4-20cf3011131b</Data>
      </EventData>
    </Event>

  • Premiere Pro CS5.5 mercury playback engine will be supported on GTX 680

    Could someone please confirm if Premiere Pro CS5.5 mercury playback engine will be supported on GTX 680.
    thanks

    Jim,
    Your comment was based upon results from the 560 Ti 448 card and that is € 240 or more. The 680 is € 440. That is 45% difference: € 440 - (0.45x440) = € 440 - € 198 = € 242
    Your comparison is based on a € 200 GTX 560 model, which only achieves a score of around 120 seconds, which is 55% less expensive (€ 440 - (0.55x440) = € 440 - € 242 = € 198) and more than 225% slower (120 / 53 = 2.26)
    So for 55% less expenditure, you lose more than 225% performance. That is very disappointing and would rank in the 'penny-wise-pound-foolish' savings. (But that is how your system can be ranked, at least in the past). There is another major flaw in your reasoning, you are only considering number of CUDA cores, nothing else. You are disregarding all the other aspects of the new architecture and that makes your argument very weak and flawed. You have to consider the number of cores AND the memory bus in combination. Something you obviously overlooked, but although the number of cores tripled in comparison to the 580, the memory bus was reduced to 256 bits width, a 50% reduction. That means that at best the expected performance gain could be 0.5 (memory bus) x 3 (number of cores) = 1.5 and not your 300%.
    To summarize:
    Now if you want to go the other way, with the 680 as the baseline, you'd say that for 60% less money, you still get 80% of the performance.
    For 55% less money, you get 44% of the performance on this test.

  • Premiere Pro CS5 crashing when exporting (only certain file types)

    Hi
    I have found that when I try and export media in Premiere Pro CS5, it often crashes during the export. It says
    It's only certain file types. For instance, Vimeo HD seems okay but Vimeo SD always crashes mid-export. MPEG is okay too, but MPEG2-DVD always crashes.
    Sometimes it says this: "Error Compiling Movie - Unknown Error" but doesn't throw me out of Premiere altogether.
    Other times it crashes altogether and Windows gives me this error message: "Display driver NVIDIA Windows Kernel Mode Driver, Version 258.96 stopped responding and has successfully recovered". Premiere Pro then stops responding so I have to re-open it and start exporting again.
    I have checked there are no gaps in my timeline and I have rendered the whole work area. Besides, I doubt it's anything that I'm doing wrong with the project itself because it's exporting fine in some formats.
    I am also experiencing random crashes when editing too. Not that often, but occasionally it throws me out - and twice it has made the whole screen go crazy, with weird dotting across the screen (it's scary, it looks like the monitor itself has broken!).
    Any help would be appreciated!
    Nick
    PS I have a pretty decent new PC - Dell Studio XPS, 8GB, 2x1TB drives, etc. Premiere itself is working great, except for these crashes.

    Some drivers do not work well in some systems... so go to nVidia and try a different (usually newer) driver for your card
    These notes are for Encore, but they MAY also work in Premiere
    Long File Names or odd characters Cause Crashing http://forums.adobe.com/thread/588273
    And #4 Here http://forums.adobe.com/thread/666558?tstart=0
    And This Message Thread http://forums.adobe.com/thread/665641?tstart=0

  • Premiere pro cs5 crashing on start up

    I have an imac i7 and i am a final cut pro user and i wanted to try adobe premiere pro cs5 before i bought well i installed it on my alumunium macbook (late 2008 model) which is and intel dual core 2 ghz processor and 4 gigs of ram and it runs perfectly fine no problems kinda like it, but when i install it on my imac i7 it runs for a little bit then crashes on start up. i even did a full system install of osx and it worked for a little and stopped and now just crashes everytime on start up, and its only premiere pro cuz i downloaded the master collection trial. and everything installed on my macbook is the exact same as installed on my imac i7. so i dont know what the heck is wrong uninstalled a million times, and i dont want to buy this software if i cant even get it to work on the main system i need it to work on. can any one help? here is a piece of the crash report.
    Application Specific Information:
    *** error for object 0x10daac200: incorrect checksum for freed object - object was probably modified after being freed.

    First, I am a PC-guy, and know almost zero about Macs, so take this with a handful of salt.
    Similar issues in PC's can be caused by programs that incorrectly report their memory address usage to the OS, or programs that tell the OS they have released that memory address, but have, in fact, not done so.
    Now, even if that is what is causing your issue, I have no clue how one could check on a Mac, but we have a lot of Mac-users around here, who can likely tell you that I am crazy and my comments do not apply to a Mac, or how to check.
    Good luck,
    Hunt

  • Adobe premiere pro CS5.5 Mercury playback engine with CUDA

    Hello,
    I am trying to turn on the mercury playback engine to use my graphic card (Geforce 9800 GT)
    I have modified that cuda_supported_cards.txt using my graphic card name and when I tried to save it it says access denied
    so I have copied that cuda_supported_cards.txt file to the desktop and modified it and replaced it back in to C:\Program Files\Adobe\Adobe Premiere Pro CS5.5   .
    After all this the mercury engine with cuda is not turning on
    Is it becasue my graphic card will not support to CS5.5?
    Please help me.....
    Thank you...

    Does your card have 1Gig of video ram?
    Also, read http://forums.adobe.com/thread/773101

  • Premiere Elements 11 crashes during playback after adding PiP

    I have Adobe Premiere Elements 11, up to date, and Windows 7 home up to date. This is a new problem that just started with my most recent project. I have done these types of edits and PiP's many times with success with the same type of source video formats, etc.
    The problem: I add a small clip of video over the main video timeline as Picture in Picture. It adds to the timeline successfully and I can even play it back ok (before rendering). If I add a transition to the front of the PiP, it will crash during playback (pre-render). Or, if I render the timeline before adding the transition, it will also crash during playback once it gets to the PiP.
    I tested PiP with still pictures and that works ok, it only crashes on video PiP. I have tested different video formats (from GoPro and from Panasonic camcorder) with the same results (crashes). I have uninstalled Adobe Premiere as well as Quicktime and re-installed them, same results. I am quite frustrated with the constant crashes, especially since I have done a dozen or more videos the same exact way using the same cameras and same types of video files.
    Any help is appreciated.
    Justin

    So I created a new project using the project preset "DSLR 1080p30 @29.97". Everything worked fine in that project using the same source videos and doing PiP (tested with both methods).
    I opened the project that was giving me problems and the PiP worked when using your approach of dropping the PiP clip onto Video 2 then scaling it down. I then deleted that PiP and re-added it the way I was doing it before, and it crashed the first time I tried to play it back.
    I closed down Elements and again tried to reproduce the crash the same way, but this time it worked and did not crash...I tried multiple times to reproduce the crash, sometimes it would, sometimes it wouldn't...
    So, I don't know exactly what the problem is. Lastnight I could reproduce the crash every time by either rendering the PiP or adding a transition to the front of it (then playing it back), every time it would crash. Now it is behaving differently.
    At any rate, I will start using the correct project settings going forward and know that I can PiP using the other method as well. Maybe the project that is giving me problems is just corrupted or something, I'll toss it an start anew.

  • Premiere Pro CS5 crashes while editing 4.5K-RED-Material

    Hi there,
    I'm editing 4.5K-material with Premiere Pro CS5. After a couple of minutes (mostly after watching sequences longer then 10 seconds) the program crashes. Windows 7 tells me that "ImporterREDServer.exe" doesn't work anymore and then Premiere freezes. I doubt that it is a performance problem, because with CS4 and regular 4K-RED-material I haven't had any problems on the same PC. I deinstalled CS5 several times (with Cleanupscript and everything) and re-installed it, but the problem remained the same.
    I would really appreciate some help or any idea what the problem could be. Thanks in advance!
    Daniel
    My system:
    i7 860 @ 2.8 GHz
    8 GB RAM
    Windows 7

    Well, well. After many tests with other platforms we came to the conclusion that it was not Premiere Pro that caused problems but the material itself. This is some kind of a worst case scenerio. In the process of copying the data onto hdds some frames within the data got damaged and causes Premiere to crash. Since the data on both discs is corrupt differently we now try to rebuild as many files as possible. Yet there will be clips that can't be saved. Anyhow. There will be a film and that's the most important thing.
    Thanks again for your help everybody
    Daniel

  • Premiere Pro CS5 crashing and not allowing updates

    Hello,
    I'm experiencing two problems with ProCS5.
    First, while in pro, the program crashes when I click on a video clip in the Lib to view it in the monitor.
    Second, I tried to update to the program hoping to correct the first issue, but the update returns the error "installation unsuccessful" for unknown reasons.
    I am running:
      Model Name: Mac Pro
      Model Identifier: MacPro1,1
      Processor Name: Dual-Core Intel Xeon
      Processor Speed: 2.66 GHz
      Number Of Processors: 2
      Total Number Of Cores: 4
      L2 Cache (per processor): 4 MB
      Memory: 7 GB
      Bus Speed: 1.33 GHz
    I just installed a 1.5T hard drive for video editing and formatted as Mac OS Extended (Journaled).
    I can view the videos directly from the hard drive and the play back is fine.  I'm only having this problem in Premiere Pro CS5.
    Any help will be greatly appreciated
    Regards,
    DS

    >just not Mpeg 4s
    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
    Report back with the codec details of your file, use the programs below
    For Mac http://mediainfo.massanti.com/
    Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project

  • Premiere Pro CS5 Crashing in Windows 7

    Hello,
    Recently I have been experiencing program crashes in Premiere Pro CS5. Everything works fine, until I try to import some media. It often imports fine, however when it comes to conforming, he whole program freezes and Windows Error Report comes up. This happens everytime. I thought that it could possibly be a problem with my computers hardware (as I had been running Premiere Pro on the bare minimum requirements). So I upgraded my Processor from a Dual Core 2.0Ghz to a Quad Core 2.5Ghz. I also doubled the RAM from 2GB to 4GB. Yet the same error still occurs. Has anybody else been experiencing the same problem, and are there any steps I can take to fix it?

    Welcome to the forum.
    What are the full specs. of your Source Files, and what is the Sequence Preset?
    Also, please tell us about your system's I/O, i.e. the HDD's, and especially things like defragmented free space. The more details, the better.
    Last, are you running Win7-64 with but 4GB of RAM? That is just about enough to run Win7-64, and leave little, if any, for PrPro.
    Good luck,
    Hunt

  • Premiere Pro CS5 crash on startup

    Before I was having a problem with cs5 crashing, I uninstalled and reinstalled the master collection, then updated everything. Premiere Pro cs5 seemed to work fine, I was jumping in my seat with the new mercury engine and how fast it was compared to cs4, but now today I come back to find out its crashing again on startup
    I have 5.0.2 installed
    On the side note Photoshop (even with its latest update) crashes on type tool
    Running latest OSX
    Tried changing permissions, reinstalling, everything! For now I guess i'll have to use cs4

    hi.. DigitalRicky,
    did you ever come to a solution for this?
    I believe I am having the same or simular problem.
    im on a mac .. 10.5.8 with enought disk spack.. about 50gb
    have downloaded update for primiere.
    two things are happening
    1.freezes/stalls/doesn't respond on opening program.. I have to force quit it or on some occasions it just quits itself. this occurs on new and exsisiting projects.
    2.  on 3 occasions after i had fiddled around with deleting preferences, i have been able to edit .. however no unable to add footage as the second i trie to add footage to timeline it stalls/freezes/does not respond.  then i have a world of hurt and can't re open.. back to problem 1.
    what trouble shooting i have done..
    1. uninstall/reinstall
    2. run no other software etc.
    3. Documents>Adobe>AdobeProductName (like Premiere Pro)  Inside of this, there is a folder with a number (usually 4.0 for CS4).  Take that to the trash and restart your application. -> this is where i can start old project but not a new one..
    4. run disk utility on comp
    5. re start comp etc
    im not to sure on what else i can do ..
    I would GREATLY appreciate any help.
    thanks heaps!
    Danielle

  • Premiere Pro CS5 Crashes on Startup on Mac

    Hi,
    I have installed Master Collection CS5 on a MacBook Pro (late 2009) Mac OSX 10.6..4 (4GB RAM) with all Apple updates applied as at 26.8.2010  , Photoshop & Illustrator work fine , Premiere Pro & Soundbooth CS5 repeatedly crash when starting up & have never worked since installing.
    I have lodged this problem with Adobe Tech Support.
    One typical  error message is "/Scully64/shared/adobe/MediaCore/ASL/Foundation/Make/Mac/../..Src/Di r ectoryRegistry.cpp-283" on launching Premiere Pro Cs5r aniother might be " No client name has encountered an error" or "Premiere Pro has encountered an error"
    I have uninstalled CS5 , used the CS5 Cleanup tool , reinstalled Master Collection CS5 (several times) the only existing  Admin user account , repaired Mac hard drive Disk Permissions ( in Disk Utility) , & checked /repaired any Font errors/duplications all with no luck.
    Does anyone have an answer ?
    Thanks,
    Rick

    I don't recognize those error messages, but you should try installing the recent Premiere Pro update, which fixes several crashing problems.
    When you have updated Premiere Pro CS5, let us know whether your problem is fixed.
    See this page for details about the Premiere Pro CS5 (5.0.2) update:
    http://bit.ly/djiyh4
    Please report bugs that persist after the update here:
    http://www.adobe.com/go/wish

  • Premiere Pro CS5 Crashing "Adobe Premiere has stopped working"

    Premiere CS5 has started on my Windows 7 64 system, after working for only about 10-15 minutes. After doing a reinstall, reading through forums, and updating drivers, nothing's working. It really doesn't seem like anyone else has had this problem. Based on the suggestions of someone with a similar problem in Photoshop CS5, I ran a registry fix up. The problem persists.
    My event viewer showed the follwoing error, which I have posted below. This is slowing me down tremendously, so help is appreciated. It might also be worth noting that, thinking this was a Windows error, I contacted their forums. They thought it was an Adobe code error.
    SS
    Log Name: Application
    Source: Application Error
    Date: 05/12/2010 1:58:38 AM
    Event ID: 1000
    Task Category: (100)
    Level: Error
    Keywords: Classic
    User: N/A
    Computer: Owner-PC
    Description:
    Faulting application name: Adobe Premiere Pro.exe, version: 5.0.2.0, time stamp: 0x4c731297
    Faulting module name: MSVCR90.dll, version: 9.0.30729.4926, time stamp: 0x4a1750b0
    Exception code: 0xc0000417
    Fault offset: 0x0000000000054fc0
    Faulting process id: 0xf18
    Faulting application start time: 0x01cb94479d2ad0e5
    Faulting application path: C:\Program Files\Adobe\Adobe Premiere Pro CS5\Adobe Premiere Pro.exe
    Faulting module path: C:\Windows\WinSxS\amd64_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.4926_none_08e1a05ba 83fe554\MSVCR90.dll
    Report Id: 15ce75e0-003d-11e0-b0a2-485b3914204f
    Event Xml:
    1000
    2
    100
    0x80000000000000
    6595
    Application
    Owner-PC
    Adobe Premiere Pro.exe
    5.0.2.0
    4c731297
    MSVCR90.dll
    9.0.30729.4926
    4a1750b0
    c0000417
    0000000000054fc0
    f18
    01cb94479d2ad0e5
    C:\Program Files\Adobe\Adobe Premiere Pro CS5\Adobe Premiere Pro.exe
    C:\Windows\WinSxS\amd64_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.4926_none_08e1a05ba8 3fe554\MSVCR90.dll
    15ce75e0-003d-11e0-b0a2-485b3914204f

    The way that I would work this would be to do a search on my system for msvcr90.dll. I expect you'll find half a dozen or more. Compare the version numbers of the files that you find in Adobe Media Encoder to the ones you have in Premiere Pro. If all the version numbers match except for one, replace the one that doesn't match. On the other hand... if all the version numbers match, replace the ones in Premiere Pro with the ones in Media Encoder. When you replace files make sure you copy files from one location to another, don't actually remove the files from the source location.That probably goes without saying, but better safe than sorry.
    Make sure to post back and let others know whether you have success or failure with this trick.
    Mitch

Maybe you are looking for