Premiere PRO CS5 Not Responding after 5.0.3 update.

Was working great until I updated to 5.0.3. As soon as I open a project I get a spinning circle along with (Not Responding) notice at the top. After waiting 10 minutes to see if it would respond and nothing happening I force quit the program. I've tried restarting the computer, opening up different projects, starting new projects and running the updater again. Still can't get it to work.
I don't think it's a hardware issue since it was running great prior to the update and this issue occuring immediately after the update.

Thanks Bill.
Eric at ADK actually resolved this for me. I hadn't uninstalled the previous driver for the quadro 5000 card when that driver was updated and premiere was having issues with the multiple nividia drivers so it was really an nvidia issue. He unistalled all the previous drivers for the quadro and that fixed the issue.
Can't say enough wonderful things about Eric and ADK. Very friendly and patient but most importantly knowledgeable.

Similar Messages

Premiere Pro CS5 not responding after 55 minutes of capture with intensity shuttle

Hi and thank you for the valuable resources on this forum.
I am capturing analogue video into Premiere Pro CS5 using he Blackmagic Intensity Shuttle (with Time Base Corrector in the video path). My captures are stopping at 54 or 55 minutes when the computer becomes non responsive. This has happened with the Blackmagic motion jpeg codec as well as the 10 bit YUV capture. Same thing happens if I capture with media express (the blackmagic capture software)
I have tweaked my system as per many of the recommendations in the forum.
Running CS5 5.03, autosave set to 10 minutes (same problem with no autosave or autosave at 20 minutes)
Windows 7 64 bit fully updated
i7 - 930 cpu
Gigabyte x58A - UDP5 (Revision 1)
24 Gb Ram
Nvidia 470 - MSI with the twin Frozr cooling solution.
Restore off, indexing off, windows search off,
Followed tips from forum and Viper regarding optimizing system
3 Hard drives
System on standard Sata 2 drive
Project capture to OCZ Vertex 3 120 g SSD drive (nice bit of gear) running on Sata 3 controller
Page file on another hard drive
Norton 360 unistalled
Anything else I could find unistalled or turned off.
Firmware and drivers for on board USB latest from Driver Station as per Blackmagic Recommendations.
Very succesful capture of things shorter than 55 minutes but I have some longer things I would like to capture in one go.
I have used process explorer to watch what happens. Nothing special that I can identify in terms of processes but cpu seems to be going to 100%.
With progessive tweaks the problems remains the same.
I am not aware of any file size limits with Premire Pro or Blackmagic - are there some?
Considering reinstall but would greatly appreciate any insights. My first post so I hope I have provided the right info to help you help me.
Thank you
Andrew

Good that you got it fixed... bridging device drivers have cause problems clear back to the computer version of the stone ages
I still have a Pinnacle Dv500 card (used via dual-boot with WinXP and Premiere 6x) that went through several device driver versions to get everything working right
While everything is working right... make a full "picture" of your hard drive to external USB drive to make recovering easy in case something goes wrong
Hardware crashes or virus infections happen, so you should buy software to make a full
backup of your hard drive to an external USB hard drive... plus, making step-by-step
backups during a new install or major program addition makes it easy to go back a step
if something doesn't work
This backup and then restore is, of course, only to the same computer with a new drive
(or the same drive as long as you don't mind writing over everything) since doing a
restore to a new computer won't work due to Windows and many programs having activation
information that is keyed to your hardware (which is why Windows will force you to RE-
Activate if you change very much hardware)
The product I use is at http://www.terabyteunlimited.com/image-for-linux.htm
Image runs off of a bootable CD via Linux (the Zip you download includes a program to
make the bootable CD) and it reads EVERYTHING on the drive, even the hidden
registration information, so everything is restored when needed... and you may restore
the image to a brand new drive in case of a crash, and not have to re-install anything
Please note that I own no part of Image, and I don't get a referral fee (that is just a
plain web link) but I use the program and it has saved me a LOT of trouble when I had a
hard drive die... and I was able to restore everything and not have to re-install or
re-activate a single program, from Windows on up

Premiere Pro CS6 not responding after adding anything to timeline

I had been using Premiere CS6 successfully for a while, but starting a few months ago, it started not responding after I did anything. I can add a title and a transition succesfully to the timeline and it plays fine, but as soon as I add a picture or video clip, it immediately stops responding. It's frustrating because the program used to work fine before.
The only thing I can think of that might have affected it was when I upgraded to Mavericks, but I haven't read anything about any serious problems with Premiere running on Mavericks. I have a late 2008 MacBook Pro.
Thanks in advance for the help.

Go to http://forums.adobe.com/community/premiere and, in the area just under Ask a Question, type in
mavericks
You may now read previous discussions on this subject... be sure to click the See More Results at the bottom of the initial, short list if the initial list does not answer your question
I am Windows so did not bookmark the messages, but I have seen SOME message threads with SOME solutions for SOME mavericks problems

Premiere Pro CS5 Not Responding (Freezing) When Working With Other Programs

Hello,
I have a performance issue with Premiere Pro 5.0.3 version. When I have the program open and bounce to another program or Windows Explorer window lets say to drag in an asset such as a music or video file and then when I make the Premiere window active the program does not respond for a good 15 seconds, then after some processing (you see the mouse icon change and hear the hard drive chugging), I am able to again work. This is happening every time I switch windows to work on something else. Even if I just click away to another window and click right back without doing anything else, it does this non responding action. It even says it in the title bar (Not responding). I am wasting so much time waiting for the program to respond.
My system :
Windows 7 Ultimate
Intel Core i7 CPU 860 @ 2.80 GHz
8.00 GB of RAM
Quadra 5800 Nvidia graphics card
Drobo Pro 24 TB drive (where my project files, music & video files live) connected via iSCUSI
Sonnet 4 TB raid drive (scratch disc) connect via ESATA
Dual Monitors
Please help!
~ Doug

Doug,
Similar had plagued earlier releases of CS5, but I thought that it had been addressed with the CS5.0.3 update. Maybe I am wrong.
There were several other threads here, with similar problems. Maybe they contain some tips that will help. The "constant" seemed to be shifting focus from PrPro, and then back to PrPro.
Good luck,
Hunt

Premiere Pro CS5 Not Responding / Not Opening / Audio Mixer Issue?

Please assist.
I have been editing 300GB of 10bit AVI footage with no problems. Recently I have had to record additional voice over which I have done through the audio card using Premier Pros Audio mixer and it appears this is where the problem may be occurring.
The Project has been set up onto three drives:
I am running the .prproj / project files off one 2TB drive and the video & audio assets on an additional 2TD drive, premier pro & the operating system is on a separate drive. I have no anti virus running or any other resource hungry programs.
PC specs:
Intel Core i7 2600 3.4Ghz Quad
16GB RAM
Nvidia GTX 560 1GB
I resave the project after each change and it appears that the edits that have the audio recordings eg: 5 different projects will not open. The projects that don't have the audio recordings open with no problems.
Does anyone have any suggestions or come across similar problems when using the Audio Mixer?

Have you installed the most recent updates?

How to work with Premiere Pro cs5.5 and After Effects cs5 together?

I have edited my movie in premiere pro cs5.5 and made the rough cut. In premiere, i have edited the video, put in soundtrack and foley. Now, i need to add muzzle flashes & blood splatters in some scenes and final color correction using After Effects cs5.
When i import the premiere project in AE and make the changes, and then i export it back as premiere project. When i open this prmiere project, it shows vaious kind of errors and no changes are retained that i did in AE. Also, when i import the premiere project (which has 4 different sequences) in AE, all the media that has been imported in the premiere project also opens in AE making it difficult to organize the media.
How should i work now so that i add vfx and color correction using AE cs5?
I thought of exporting the video from Premiere pro and then open the video in AE and add vfx to some scenes and color correction to the full video and render it out again. But, this is the first time i am using AE and i am not sure if this is the best way. PLEASE HELP.
Or, i could import the whole project in AE, add vfx, do color correction AND then export to video from AE. But i think, it will be better if i export the video from Premiere as it has loads of options to choose from while exporting to a movie.
The dynamic link does not work between Premiere Pro Cs5.5 and After Effects cs5. Even if it does, its not working on my pc.
All the footage is in HD and i want the final result in best quality HD too. PLEASE Help!

If you are working between After Effects and Premiere Pro but with versions that are not the same number, you need to just work with movies rendered and exported as intermediate, lossless files.
Dynamic Link only works between After Effects and Premiere Pro of the same version number, and only when they are installed as part of the same suite.

My Adobe acrobat X Pro does not respond after a minute I open up a pdf file

I recently have installed Adobe Master Suite CS6 Collection. My Adobe acrobat X Pro does not respond after a minute I open up a pdf file. This happens every time when open a new pdf file. My operating system is Windows 7 pro ( Lenovo-64 bits). Any suggestions would be appreciated !!

Mylenium
Thank you for the suggestions.
I checked the WIndows log files. It reported the following error:
The program Acrobat.exe version 10.1.1.33 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: 4770
Start Time: 01d0079a09bba381
Termination Time: 13
Application Path: C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\Acrobat.exe
Report Id: 4f145db6-7391-11e4-8fc1-005056c00001
I ran for the memory diagnostics as it showed the error with video card error. My NVDIA graphics card is not working properly. Do you think that could be a problem?I am running on Windows 7 64 bit computer. It also complains about the incompatibility with 64 bits.
Thank you.

Adobe Premiere Pro CS5.5 crashes after using "File"-Menu

Adobe Premiere Pro CS5.5
Hello,
As of yesterday, can the "File" menu no longer operate. Other submenus can not be done. The program crashes after.
I have been three times the program is uninstalled and reinstalled. No improvement.
Yesterday I drove down the PC and there were 21 Windows updates, are there perhaps relationships?
Who can help me?
Gerd

Update! - FIX...
Spent about 5 hours working with a 2nd level Adobe Support tech and we were able to track down the error. You’re not going to believe this.
Adobe Premiere was the only application affected by the bug. AF, Encore, Audition were all able to open a WAV file with no problem. Premiere would lock up (Not Responding) as soon as you tried to open a WAV file.
Come to find out it was not an Adobe problem after all. I installed the Smart Sound plugins in June/July of this year and that plugin was the issue. Once it was removed I could import Wav files again.
Smart Sound has upgraded the plugin and the new plugin works just fine.
My thanks to the Adobe tech who stayed with the problem until it was resolved. And I suggested to the SmartSound tech that they find a better way to notify users when they find a bug of this magnitude. But you might guess how well that was revived.

Where can I find Plugins / Transitions for Premiere Pro CS5 (not Cs 5.5 or 6) ?

Hello,
I am searching and searching for transition packs for Premiere Pro CS5, there are lots for 5.5 or 6 but none for 5. At least I could't find them.
Any ideas anyone?
Thanks in advance
Alex

https://www.adobe.com/products/premiere/extend.displayTab4.html
Chances are most plug-ins working for the later versions will also work for CS5, but you can check with each company if you're not sure.

Premiere Pro CS5 AND/OR After Effects ?

Hi guys,
I am quite new, I have only done one videoproject and that was in Premiere Pro CS4. Now I got a new machine and have both Premiere Pro CS5 and After Effects. I have started learning AE from some videos and it is quite impressing what you can do there. So I hope I can use AE to improve my videos.
My question is, shall I do the project in PPCS5 and then connect to AE for making special effects on clips or shall I do the whole project in After Effects ?
If I choose AE for the project, will I miss some functions from Premiere Pro?
Many thanks in advance !
Sven

Thanks for that.
I also posted the same question in the After Effects Forum and got some good answers there. I got this link that is very helpful.
http://help.adobe.com/en_US/aftereffects/cs/using/WS4648B7F7-2D89-4765-BC8A-271D9A7574A3a. html
So now I hope I am on track again!
Thanks again.

Premiere Pro is not responding

Primire Pro is not responding to video which is there in the timeline.When i scrub slider video cant be able to play?
[Please choose a short description for the thread title and only post the actual issue in the main body.]
Message was edited by: Jim Simon

Hey Ann,I am using premiere pro cc in win 7 and project setting is..i am sendin u the screen shot

Premiere pro cs5 will crash after start

i bought a new macbook pro with mavericks. i reinstalled premiere pro cs5 as well as other cs5 programms. all the others work, only premier pro will not load. if i click on the icon it opens for a second and thats it. i saw that other users faced the same issue but i didn't find an answer anywhere. thanks for your help

i bought a new macbook pro with mavericks. i reinstalled premiere pro cs5 as well as other cs5 programms. all the others work, only premier pro will not load. if i click on the icon it opens for a second and thats it. i saw that other users faced the same issue but i didn't find an answer anywhere. thanks for your help

Mac OS 10.7 and Premiere Pro CS5 not reading AVI and DV files, not rendering to Media Encoder

Hi Folks,
I've been wrestling with these problems since I bought my Macbook Pro running Lion (currently v10.7.3). I've had video editing and DVD authoring workflows that have worked perfectly for both CS3 and CS4 with Premiere Pro and Encore. I used to be able to import DV and AVI files and render timelines to Adobe Media Encoder so I can make DVD projects in Encore but it seems there are a lot of broken bits and pieces either with 10.7 or with CS5 or both. I've tired creating new projects or re-editing CS4 Premiere Pro projects that I can still edit with CS4 on my old Macbook Pro with 10.6.8. In fact I've given up on CS5 and I've gone back to my old laptop to edit. My problems with CS5/5.5 are:
1     Can't import DV files - error message saying this is an unsupported format
2     Can't import AVI files - error message saying this is an unsupported format
3     When I export media and try to use Adobe Media Encoder (AME) the render queue doesn't respond to the files being sent from Premiere Pro (PPro). I have to render the files one at a time from within PPro. I have no idea where the queued files go but even if I have AME open it doesn't respond. In CS4 AME would open automatically and wait until I told it to render the files.
4     In Encore I've had trouble burning to DVD. I have to make an ISO file and then burn that using Toast. I'n not particularly fussed about this but while I'm unloading I may as well give you the full picture.
Basically I'm really hating this vcersion of CS5/Mac OS. Lion is like using Vista from what I can tell. On my PCs I went from XP to Windows 7 so I kinda avoided all that pain it it seems the computer gods are smiting good and proper now. I don't care whose fault it is I want Apple and Adobe to fix it or if some kind soul can share their experiences and hopefully how they fixed it I'd be eternally grateful until the next upgrade totally blindsides us all.
Thank you in anticipation --> Mal/Melboure/AU

Sorry for your troubles.
Pr 5.5.2 is still a bit persnickety for me on 10.6.8, but overall, it's still faster than FCP7 and MC6, and overall pretty dependable. Imports and plays AVI files just fine.
Lion still isn't ready for prime time, from what I've seen. Like all Mac OS releases, it probably won't be until 10.7.6 or so. And that may never happen, becuase 10.8 is purported to be just around the corner.
So, my advice is, if possible, go back to what works, 10.6.8.

MacBook Pro 15" not responding after boot-up?

My MacBook Pro 15” has an issue and won’t work! Yesterday I went to my MB to load it up for my daily commute into the city. As I was loading my bag I tried to disconnect my ext. backup drive that works via Time Machine.
When I left it the night before for its nightly back-up everything was five by five. However in the morning I couldn’t disconnect the device nor did my trackpad work (no mouse cursor). I was forced to perform a cold shut-down.
When I returned home last night I initiated a power up on my MacBook Pro. Everything booted up fine however I didn’t have control of the trackpad. My keyboard didn’t work either. I shut it down and repeated the process a few more times. Each time after the boot-up I had the same problem. I can see the mouse cursor, but have no control and the keyboard will not respond to any key being depressed.
Does anyone know what is wrong my MacBook Pro, beside user error or the “Nut behind the wheel?”
Any help or suggestion would be appreciated.
Cheers~
Message was edited by: Fish Eye

Michael Flynn wrote:
Did you try booting up using the system disk? By rebooting into the system disc, will test whether the keyboard problem is localized to the installed version of OSX or a larger problem.
Here is a little follow up. I went home and tried the system disk. No luck, now I have a system disk in my machine that I cannot remove because the eject button doesn't work.
I took my MBP to the Genius Bar as scheduled. The “Genius” did the normal reboot and head scratch test. However when he plugged in an external mouse and keyboard, voila Bob’s your Uncle and it worked. Hi expert firm determination had concluded that the trackpad and keyboard were no functioning on my MBP…
The trackpad and keyboard are connected to the motherboard via a ribbon cable that had been fried at the connection. They will be keeping “left brain” for the next few days to RR the trackpad and keyboard.
The good news is that I have the service plan that will cover all expenses and parts. It was worth it to spend the few extra monies upfront, because I could only imagine what this would cost without it.
The other good news is that they will not send my MBP to the Tennessee repair depot, it will stay at the store to be worked on.

Premiere Pro CS3 Not Responding on new System

Can someone please help me out here?!?!? I just bought a brand new laptop. It haves an i7 processor, 8gb of ram, 1 tb of hard drive space, as well as runs on 64 bit with Windows vista 8.1 I believe. As we all may know Adobe Premiere Pro CS3 runs as a 32 bit program. Every time I try and open up a project I have already been working on prior to my new system and try to locate where the specific files are for it to link/synchronize, the Adobe Premiere Pro CS3 program freezes up and "Not Responding" appears causing me to press "ctrl, alt, and delete" to end the program using the task manager every time. Shouldn't I be able to run a 32 bit program on a 64 bit system? What can I do? Please help me!!! Thank you in advance!!!
[Text formatting corrected.]
Message was edited by: Jim Simon

2 things to try
Right click the program icon and, if available, select running in WinXP mode from the pop-up option window
Right click the program icon and, if available, select run as administrator from the pop-up option window
>Windows vista 8.1 I believe
As far as I know, that does not exist... current is Windows 8.1 (Vista is OLD and discontinuted)

Premiere PRO CS5 Not Responding after 5.0.3 update.

Similar Messages

Maybe you are looking for