Premiere Pro CS5 will not install on a brand new PC

I am trying to install CS5 on a brand new PC running Windows 8.1 Pro . The installer says that my computer does not meet the requirements to install Premiere and AfterEffects. However, I know that the hardware meets at least the minimum requirements. Any ideas on how to bypass this and install the two components? THanks.

Hi aarroyave,
CS5 has not been tested on Windows 8.1 Pro.
64 bit support is required for After Effects and Premiere Pro CS5
You can check the tech specs at :
Premiere Pro : http://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-premiere-pro.html#ma in_Adobe_Premiere_Pro_CS5_system_requirements
After Effects : http://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-effects.html#main_Af ter_Effects_CS5_system_requirements

Similar Messages

Premiere Pro CS6 will not install after uninstalling it?

I was having a problem with Red Giant's Mojo plugin. Their preset would not show up in Premiere Pro CS6. The Red Giant tech told me to reinstall PPro. So I did the uninstall thing and now when I click to install PPro, nothing happens. I did things like restarts and repaired permissions, but nothing helps.Any ideas?
Mac Pro 1,1 - Lion 10.7.5

This is how I solved the problem:
Been on the chat with Red Giant. They could not fix the problem. They told me to re-install Premiere Pro. That didn't help. The presets still did not show up. The Mojo preset file would not import. So what I did was, since the Mojo presets do show up in After Effects, I applied each preset to a clip. Took a screenshot of each one of the slider of where they were set in the effects control panel. Then went back to Premiere Pro, manually set the sliders for each preset that I made screenshots of. After each one I set, I did a save preset. Made a new bin and put all nine preset in the bin. It was a little time consuming but it got the job done.
Hope this helps.

Premiere Pro CC will not import .mov files

Having issues with Premiere Pro CC, I cannot import .MOV files created with my Canon 6D.
If I try to import the files, I get a very generic "File format not supported" error msg.
This is a new install of Premiere CC on a new computer. I was able to import them using Premiere Pro CC on the old computer.
Quicktime will play these files fine on my new computer.
Premiere Pro CS6 will import these files on the new computer.
Premiere Pro CC would open them fine on my old computer.
I'm not even sure where to start. Any help would be appreciated.
Here are my system details:
OSX 10.9.3
new Mac Pro
3Ghz 8-Core Xeon E5
64 GB RAM
Files are on external G-Tech Thunderbolt drive.

That was I was thinking at first, but if Premiere CS6 (installed on the same computer) imports and plays them, they must be on the system, no?
I really do not want to transcode. I have an existing project that uses the videos and the project on the new system will not import them or re-link to the videos. Really trying to get away from having to re-create the project and re-edit.
Thanks!

Why won't premiere pro cc will not let me add an adjustment layer

why won't premiere pro cc will not let me add an adjustment layer

Glad that you got the adjustment layer issue worked out. Not quite enough info to troubleshoot the other problems. The following page outlines the kind of info that helps zero in on the cause of such problems: FAQ: What information should I provide when asking a question on this forum?
As to the cache files and rendered previews, you do not need to keep them. Premiere will regenerate them as needed. Because re-conforming the audio and re-rendering the sequence takes time, you probably want to keep those files around for the current project--unless, of course, you have reason to think that the cache or render files are causing problems.
To keep things clean and get the attention of more people, it would probably be best to start a new thread for the other issues.

PreludeCC and PRemiere Pro CC will not update error: " log Transport 2"

PreludeCC and PRemiere Pro CC will not update . update gets to 62% and then quits with the following error code "Log Transport 2"
System
OS 10.9
MacPro 3,1
All other apps do update.

HI Steve & Perry,
Have you tried restarting the machine and applying the updates again ? If yes, are you still getting the same error message ? If yes , could you please share a screen shot of the error that you get ?
Cheers,
Kartikay Sharma

Premiere pro cs5 will crash after start

i bought a new macbook pro with mavericks. i reinstalled premiere pro cs5 as well as other cs5 programms. all the others work, only premier pro will not load. if i click on the icon it opens for a second and thats it. i saw that other users faced the same issue but i didn't find an answer anywhere. thanks for your help

i bought a new macbook pro with mavericks. i reinstalled premiere pro cs5 as well as other cs5 programms. all the others work, only premier pro will not load. if i click on the icon it opens for a second and thats it. i saw that other users faced the same issue but i didn't find an answer anywhere. thanks for your help

MacBook Pro 17" Will Not Install Boot Camp

Has anyone else found that Boot Camp will NOT install on a 17" MacBook Pro? We were able to partition the drive and install Windows but when we tried to install the Mac Drivers we kept getting the error message "this software will not install on your hardware". This is very frustrating as we bought the 17" specifically to run both Mac OSX and PC Windows. Has anyone got any ideas?

You may need to wait until Apple updates the drivers or you could try extracting them from the package then installing them that way

Acrobat Pro 10 will not install keeps rolling back

I am attempting to install Adobe Acrobat X on a Windows 7 64 Bit machine, it will not install, gets all the way to the end and then just starts rolling back says the installation was interrupted and that no changes were made to the system.
I ran the msi from the command line with verbose logging on to see if I could figure out where it fails but couldn't find the error (towards the end it lists many errors but it seems to just be a list of possible errors, not sure but I definately have admin right and ran the msi as an admin so at least those two don't make sense).
I don't understand why its not installing but I'm really ticked its not at least telling me why its not installing. I had adobe reader and flash on the computer and I was afraid they might be newer versions than just straight Pro X so I uninstalled everything adobe on the computer and it still won't install the Pro X.
Can someone take a look at my log file and see if they can tell what I'm doing wrong? It would be very appreciated.
Thanks, SW.
Log file link
https://docs.google.com/open?id=0BwFRNdTQrK4sc3Q1aV9uMl9uZXc

One thought. Have you tried downloading the updates (http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows) and installing directly, rather than doing updates through the help menu?

CC and Premiere Pro CS6 will not open

I have downloaded and installed the app twice.
I go into Creative Cloud and I can see Premiere Pro CS6 is an installed app but i can not click on it to run it.
At this point is have spent an hour trying to run one app.
I get no error it just does nothing.......
Just want to try it... So far it is not looking good....

What about the Program Files location? If you don't see it there, use the CC cleaner tool to uninstall the apps and then reinstall again. Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Thanks,
Rameez

Acrobat Pro XI will not install. Error says: Setup has determined you have a more functional product.

I have Standard XI installed and Pro will not install. Says Setup has determined you have more functional product. Setup will now terminate.

It may be that it is seeing the version number and not the product itself. All I can suggest is for you to deactivate and uninstall Std, then install Pro.

HP OFFICEJET PRO 8500 - Will not install on wintows 8.1- says SYSTEM CANNOT FIND SPECIFIC FILE

My HP Officejet 8500 will not install on windows 8.1. The error message says:
The system will not find the specific file

Hi,
Follow the steps below and check if that resolve the issue:
1. Open Mcafee software, from the Virus and Spyware Protection section click on Schedule and run scans. Click on Real time scanning and then on Turn Off. select till I restart the PC and confirm by clicking the Turn Off button.
Now try reinstalling the HP Software and check if the error no longer appear..
If the issue persists continue follwoing the next steps below:
2. Open the run dialog by clicking both the Windows key and the R key on your keyboard. Type %windir% and click on OK.
3. Type hpoins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpoins1.old)
4. Type hpwins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpwins1.old)
5. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /UNREGISTER into the Run dialog and click on OK.
6. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /REGSERVER into the Run dialog and click on OK.
7. Run the installation file and check for any difference.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Premiere Pro CS6 will not shut down - this has occured since installing.

Hello,
I recently installed Premiere Pro CS6 and the program will not shut down normally, I have to always shut it down using the task manager. Should I try re-installing the program?

We cannot know. You are not providing any system information. Such issues are most of the time driver issues where certain DLLs are not released/ unloaded from memory.
Mylenium

Premiere Pro CS3 Will not open

New install of PremiereCS3 gets as far as the purple window (loading Dlls etc), never gets any further. Happened with 3.0 then downloaded the patch for 3.2.0 update, same problem.If I press ctrl+alt+del premiere is not shown to be running. I have tried other workarounds that have been posted eg creating new windows user account and deleting workspace.cfg (interestingly
F:\Documents and Settings\Nearlyworks.NEARLYWORKS\My Documents\Adobe\Premiere Pro\3.0 was empty - I created workspace.cfg, then deleted it, still won't open)
I previously had Cs3 running fine on a Athlon 64 200/Asus KV* deluxe 1gb system and worked fine but getting a bit slow esp with HDV so have rebuilt my system:
GA-73PVM-S2H Motherboard
NVIDIA GeForce 7100 / nForce 630i Chipset - onboard graphics, shared system memory
4gb Corsair RAM (DDR2 800)
Intel E5200 CPU @ 2.5 Ghz
Creative Audigy zs2 platinum audio card using Kx project audio drivers
Windows XP pro (MCE) service pack 2
No antivirus software
graphics appearance set to best performance (ie Windows classic look- no animated or translucent windows).
Screen resolution 1360 *768 32 bit (best fit appearance for LCD TV/monitor that I am using)
I have done a repair installation from disc, still no joy.
The only thing I remember is that during 1st installation a dialogue box came up suggesting I did not have minimum spec screen resolution - I didn't take of note of what it exactly said but my resolution appeared to be higher than what it wanted so I just scratched my head and continued.I have experimented with other monitor resolutions (which look wrong in terms of aspect ratios) to see if premiere opens but it still won't.
I have also installed Encore CS3 (that came with the Premiere disc) and this works fine.
Very frustrating to build a new system in the hope that premiere will run smoothly then find out it won't run at all.
Should I uninstall premiere and start again?
Any wisdom or answers most gratefully received.

When CS3 is attempting to load, what is the last entry with regards to the .dll's. You have to look closely to see them go by. I've found that setting up a video camera to shoot the screen can help. Just pause your tape at the point that it fails, and see which .dll it's struggling with.
If you have many VST plug-ins, one of those would be a likely candidate. Do you have any Audio programs, like Native Instruments? PrPro will survey your entire system, looking for VST's. Unfortunately, there are some that it cannot use. These usually give only an error message that appears the first time that PrPro tries to load that one. You never see that message again, even though PrPro still cannot use it. Most are fine and PrPro knows that it cannot use the VST. Others, will cause exactly what you are seeing.
Now, that is not the ONLY reason for such behavior, but I want to rule out VST's first. Still, that last line will give you a clue. It could be that .dll, or the next one (whatever that is), that is the issue. The .dll could be corrupt. If it's an Adobe .dll, your updates should have fixed it. If it's someone else's, then it could be tougher to track down. If you can get the name, then a search should tell you which folder and which program has that .dll.
Good luck,
Hunt

My adobe premier pro CS6 will not install

Hi there
I am trying to install the adobe premier pro cs6 trial version, when I go through the set up, it say's that Adobe Encore CS6 and Adobe Premier pro CS6 do not meet os requirments, 64 bit os recommended.
I really don't have much idea what that means or if there is a way around it etc. is there another version of the trial that doesn't require 64 bit? My computer is operating a 32 bit system.
thanks
Bex

Unfortunately not.
Premiere Pro CS6 and Encore CS6 are 64 bit only. They will not run on your machine.
http://www.adobe.com/au/products/premiere/faq.html#64bit-support
You could have a look at Premiere Elements which runs on 32 bit and 64 bit.
http://www.adobe.com/au/products/premiere-elements/tech-specs.html

HP Officejet Pro 8630 will not install In Windows 8.1

Error 5: Failed to add port monitor HP Discovery Port
Monitor (HP Officejet Pro 8630)
When I try and install the printer the software hangs up after the first page with this error message and it will NOT go any further.
On my Windows 7 Laptop it went right on without any problems.
I'm about ready to take this one back to the store and DEMAND my money back.

Hello there @FIRSTLIONHEART ,
After doing some research for you, I have found another community member with the same issue who's issue was resolved within this thread.
Please click this link to see their solution and try the steps:
error 193: failed to add monitor HP Discovery Port Monitor (HP Office jet Pro 8600).
If this does not resolve the issue for you, please let me know the results!
Good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Premiere Pro CS5 will not install on a brand new PC

Similar Messages

Maybe you are looking for