Premiere Pro CS6/CC seem "crashy."  Is this a shared perception?

Aloha all!
I'm a transitioning FCP editor.  I subscribed to the CC, and have downloaded both CC and CS6, and have them installed on both my home and office machines (both contemporary Mac Minis with 8GB RAM.  One runs OS 10.7.x, the other 10.8.x).  I'm learning my way around using a variety of methods: online tutorials; classroom-in-a-book; re-editing projects formerly completed in FCP.
And, I have to say, both applications seem to crash waaaaaay too often. 
There are things i can do to cause a crash with 100% reliability.  Like, for example, trying to use the "Analyze Content" function.  100% guaranteed to crash CS6 on both machines.
There are things I can to to cause a crash more often than not.  Like, for example, copying and pasting an audio clip from one track to another in either CS6 or CC. 
Anyone else find this to be true?  Anyone have any practical advice on improving the performance of my systems?
Mahalo!
Tom

Hi Tom,
Have you installed the latest updates for Premiere? Those often provide bug fixes, performance and stability improvements over the original release.
CS6 works very well for me on the PC at home, and CC has been good at work as well. I would question that Mac Minis are not terribly powerful and that 8GB is a little light on memory, even though it may meet the "minimum" Adobe requirements. Also, you must use a dedicated hard drive for video with ANY NLE, never recommended to use the system drive. You might be using an external drive, but if it's USB 2.0, that could also be a problem as they are not fast enough for most editing needs.
So, there are many reasons that you might be having a less than stellar experience. We don't know what kind of footage you are editing either. And was it imported properly? Tapeless formats such as XDCAM and AVCHD should be brought in via the Media Browser in Premiere, and the files should not have been modified in any way - best to copy the entire contents of memory card to video hard drive, then import. No conversions applied first.
Thanks
Jeff Pulera
Safe Harbor Computers

Similar Messages

  • Why can't see the timeline audio waveform on sequences inside another sequence in Premiere Pro CS6? Can I fix this?

    Does anyone know why I can't see the timeline audio waveform on sequences inside another sequence in Premiere Pro CS6? Can I fix this?

    PERFECT!!! THANK YOU, Ann!!!

  • I have inherited equipment from my predecessor at my new job. I cannot locate the Premiere Pro CS6 install CDs. Could this have been something that was downloaded?

    I have inherited equipment from my predecessor at my new job. I cannot locate the Premiere Pro CS6 install CDs. Could this have been something that was downloaded?

    Could have been... do you have a supervisor who keeps track of what is ordered and how it is purchased?
    Do you have access to the Adobe ID that was used to install the software so you may check the account?
    Lost information
    https://www.adobe.com/account.html for serial numbers or subscriptions on your Adobe page... or
    Lost serial # http://helpx.adobe.com/x-productkb/global/find-serial-number.html

  • Premiere Pro CS6 will not shut down - this has occured since installing.

    Hello,
    I recently installed Premiere Pro CS6 and the program will not shut down normally, I have to always shut it down using the task manager.  Should I try re-installing the program?

    We cannot know. You are not providing any system information. Such issues are most of the time driver issues where certain DLLs are not released/ unloaded from memory.
    Mylenium

  • FAQ: How do I trim in the Timeline using keyboard shortcuts in Premiere Pro CS6 and CC?

    You can now trim with a lot more keyboard shortcuts in the Timeline in Premiere Pro CS6 and CC. See this article for details: Timeline trimming using keyboard shortcuts in Premiere Pro CS6.

    I'm relieved (if a little frustrated!) that others have the same issues, it makes me feel at least it's not just me! :-)
    I am running Windows 7 64 bit Intel quad core processor 8Gb RAM if that helps Jim?
    Another quick test shows I have exactly the same issues as shooternz and Ann Bens above at 7 & 8 respectively. An audio only or audio/video clip from Bin to SM and I can add markers on the fly perfectly. Audio/video from the timeline to SM works just the same. Audio only from the timeline will not work however.
    I tried linking a video clip to my audio clip to see if that would allow me to add markers then unlink and remove the video... but when I opened that in SM the add marker button was greyed out and the keyboard shortcut (M) didn't work either!
    Curiouser and curiouser...

  • Premiere Pro CS6 does not recognize USB PnP Sound device connected  to iMac OSX even when activated in Audio MIDI setup. The iMac(i-7 processor,16 GB)   is working with this USB device without any problem

    Premiere Pro CS6 does not recognize the USB PnP Sound device in order to produce a commentary sound track. The USB device has been activated on the iMac OSX by using the Audio-MIDI-setup and is working correctly with the iMac. When opening > presets >audio hardware I can only select between >standard >out  integrated > digital input integrated >microphone integrated. USB PnP is not indicated at this place.
    With the built-in microphone of the iMac I can produce the commentary sound track, but I would prefer a stand alone version for better quality.
    Your help is highly appreciated. Thanks in advance, Annemarie!

    I'm using a Logitech Webcam Pro 9000 (which has a microphone on the side). I have several other devices plugged into separate USB slots: a keyboard, a mouse, my iPhone, and a Roland keyboard midi controller.
    I've considered that maybe the webcam/mic combo is the culprit. If USB doesn't work at a constant speed, that could very well be causing the issue! The sound begins to lag badly sometimes when it's working properly, so that there's a multisecond delay between speaking and hearing my voice repeated back over the mic which is another sign that something is wrong. I've also caught it making a strange electronic sound during its "hang" time once it stops taking sound input correctly.
    Maybe I should try to use line-in and forgo USB altogether then. I think I'd need a preamp and some sort of converter for that since the Mac Mini lacks a powered mic jack. I'm only a newbie musician so I've never set up such a system but it might be a better solution in the long run.
    I'll check to see if it hangs before or after my computer enters suspend mode, that's a good suggestion too. Thank you for your help!

  • "We are unable to validate this serial number for Adobe Premiere Pro CS6 Family."

    I have bought and obtained a license serial number for Premiere CS6.
    I have downloaded the files for Premiere CS6
    PremierePro_6_LS7.exe                    PremierePro_6_LS7.7z
    PremierePro_6_Content_LS7.exe     PremierePro_6_Content_LS7.7z
    I have run PremierePro_6_LS7.exe and, having specified load with serial number, reached the point of entering the serial number.
    "We are unable to validate this serial number for Adobe Premiere Pro CS6 Family."
    I have checked my account and the license is on file.
    The serial number is 24 digits in 6 groups of  4 characters.
    Please provide an answer to this.
    I've been using Adobe Premiere since 2006 and currently have CS5.5.
    This is the first time I have had problems trying to download and set up a version.
    It has taken most of the day so far!
    Peter
    CS6 END USER ID                       22298999
    End User Name                           PETER JONES
    Previous records under              PETER FENNELL-JONES

    No problems with CS5.5
    I have not tried removing it (not until I have CS6 sorted)
    Windows 7 Pro (64 bit)
    I have installed CS6 in trial mode and entered the license number.
    The Serial number appears to have been accepted.since Encode now starts up without a license message.

  • If I select a clip on my Timeline in Premiere Pro cs6, everything to the right of it is also selected. What can I change in my settings to prevent this from happening?

    If I select a clip on my Timeline in Premiere Pro CS6, everything to the right of it is also selected. What can I change in my settings to prevent this from happening?

    Most browser have a addblocker or addblocker plus.
    Safari>Extensons
    Firefox is a add-on.  Firefox>Tools>Add-On

  • Premiere Pro CS6 - Shouldn't be THIS slow..?

    Hi All,
    I have the following spec machine:
    Macbook Pro 2.4 Core i7 (Late 2011) 16GB RAM
    Running Mac OS X 10.8
    1x LaCie Thunderbolt drive (media)
    1x USB 2.0 scratch disk (media cache)
    Local 512Gb SSD (project files)
    Set up like the above surely shouldn't be staggering along with fans blazing? I currently have a 2 minute video sequence 1920x1080 with 1x adjustment layer for colour correction TURNED OFF and it still can't play back properly even at half the quality...
    Is the above setup wrong? I was always taught to split the locations of project files, media and cache... Happy to listen to anyone who knows better though? Thunderbolt drive is so fast so why oh why is this struggling..
    Auto graphics switching is also OFF so it isn't that..
    Andy

    Sorry to hijack this thread, but I've also been experiencing super slow performance with Premiere Pro CS6.
    My setup is as follows:
    MacBook Pro
    2.2GHz i7
    8GB DDR3 RAM
    500GB Harddrive with 30GB available
    AMD Radeon HD 6750M
    I'm editing footage from a 550D DSLR, which comes out the camera in H264 format.
    The project I'm currently working on should by no means be very processor intensive. It simply cuts between 10 different shots of a person talking to the camera, and there are only 13 video clips imported into the project.
    I experienced very choppy and slow playback until I read your post Greg. I had GPU acceleration turned on, so I decided to try turning it off. I instantly noticed improved performance. Is my machine simply not cut out for GPU acceleration?
    Thanks,
    Jonnie.

  • Running Premiere PrO cs6. After upgrading to Yosemite 10.10.2 Adobe Premiere wont run, come up with system error and shuts down. Any one else had this issue?

    Running Premiere PrO cs6. After upgrading to Yosemite 10.10.2 Adobe Premiere wont run, come up with system error and shuts down. Any one else had this issue?

    can try this Premiere Pro CC, CC 2014, or 2014.1 freezing on startup or crashing while working (Mac OS X 10.9, and later)

  • I'm a new user and learning, I bought and installed Premiere Pro cs6.  I got a nice video clip but has a baby cried in the background and very annoying.  My question is, is this noise remover is separate from the cs6 or I need to get this software downloa

    I'm a new user and learning, I bought and installed Premiere Pro cs6.  I got a nice video clip but has a baby cried in the background and very annoying.  I have tried all of the sounds in Prem cs6 but didn't work. My question is, do I need to get a separate sound software download and install to be able to use it?

    In the CS versions, there was some audio capability in PrPro but you needed to get a separate audio program for major work. Lessening a baby definitely qualifies as major work. That's lessening, i dont mean eliminating. Adobe's audio program is Audition. There are others "out there'. In the CC versions one just downloads Audution also.
    Neil

  • Premiere Pro CS6 serious error has occurred, crash troubleshooting

    ERROR MESSAGE: Sorry, a serious error has occurred that requires Adobe Premiere to shut down. We will attempt to save your current project
    Problem: Starting last night Premiere would crash with this error message. This has been happening increasingly more over the past couple weeks, but starting last night and today - it has happened so much that I cannot get more than 5 minutes of work done without it crashing. It has happened on saves, renders, playback, switching active timelines, removing the mojo effect from a clip, and while sitting dormant. I’ve had the computer less than a year and hope that it is not a serious problem with my RAM or graphics card.
    Using Premiere Pro CS6 - subscription based with latest update installed
    SPECS:
    MacBook Pro Retina, Mid 2012
    Processor: 2.6 GHz Intel Core i7
    Memory: 8 GB 1600 MHz DDR3
    Graphics: NVIDIA GeForce GT 650 M 1024 MB
    Software: OS X 10.9.1 (updated after problem started)
    (nothing external from factory setup in terms of hardware)
    Use an External USB 3.0 7200 RPM drive from OWC for project files
    Use an External Seagate 3 TB drive for media storage
    Using all DSLR footage from Canon 6D, Canon 5D mk II, and Canon 60D and audio from external recorders (.mov, .WAV, .wav files)
    Third-party effects or codecs: Use Pluraleyes 3.0 and Mojo color from Red Giant
    I realize this is a general error message and there are several forums posted from mostly more than 5 months ago. I cannot seem to find an answer that will help me. Here is what I have already tried:
    1. updated to Maverick
    2. checked for updates for Adobe software
    3. Cleared the Media Cache
    4. Switched from CUDA to software only
    5. Updated CUDA and switched back to CUDA in premiere
    6. Held SHIFT while starting up (nothing seems to happen or pop up on screen at least)
    Next:
    —Going to uninstall Premiere and reinstall.
    Any suggestions or possible fixes are great appreciated. What should my next step be?

    UPDATE:
    STEP 1:
    Uninstalled and reinstalled Premiere - worked without crashing for the longest time since yesterday. After 1 hour of running - it crashed once again with same error message and same report (see below).
    Same as before:
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000000
    STEP 2:
    --Updated the RED GIANT plugin "mojo" (minor coloring software)
    This worked for less than 10 mintues and then crashed again - but this time with different exeception details (I'm not sure what these mean)
    Crashed Thread:  2
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Application Specific Information:
    *** CFRelease() called with NULL ***
    STEP 3:
    Going off of the idea that it may be the plugin causing the issue (since it needed to be updated) I went into the project and deleted all of the files containing this effect in this project file (note: i have used this for 10+ projects on this computer with no trouble).
    I thought it was fixed, from about 8:00 PM - 11:45 PM no crash - then as I was playing back clips - crashed again.
    I have been loosely following these guidelines: http://helpx.adobe.com/x-productkb/global/troubleshoot-system-errors-freezes-mac.html
    I am not sure where to go from here - should I continue into the "advanced troubleshooting" even though I'm not sure if any of these things are related.
    IMPORTANT NOTE: I have launched two other Premiere Project Files (from previously completed projects) successfully without crashing. I tested a few things in the projects before returning to the problem project. If I suspect there is a problem with the file in particular - how do I find out what is causing the problem?
    --I already removed MOJO effects thinking that could be the issue from the last files that were
    --I have already gone back to a previous version from a week ago and imported the Sequence I needed. Still crashed.
    I have sent 5+ reports to Adobe on the crash. Any feedback into this is much appreciated.

  • Cannot install Premiere Pro CS6 and Prelude - Losing my mind

    I've been trying for 3 days to find a solution to this problem. I know a lot of other people have had this problem but the solutions all seem different based on the interpretation of the summary report generated by the installer. I've tried dealing with Customer Support over the phone and they have absolutely no idea how to fix this. I've downloaded and installed the CS6 Production Premium. All apps install successfully except for Premiere Pro and Prelude. One option I read was to remove a few Adobe fonts (which I tried) and the problem still exists. Adobe Suport suggested uninstalling then reinstalling Air. Tried it and things still aren't working. I even tried installing in Safe Mode. I'm on a Mac running 10.6.8
    This is the summary:
    Exit Code: 6
    Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DF015, DW063 ... WARNING: DS013, DW066 ...
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 18 error(s), 6 warning(s)
    WARNING: DS013: Payload {298CF0B0-8B47-46DF-B726-8E4BFAD5432E} AdobeHelp 1.0.0.0 is already installed and the session payload {AA0D312F-1570-4E7E-9A7D-E191E0090FEC} AdobeHelp 4.0.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Payload {CD693E49-C5EF-4FA6-9037-9B636931C02B} AmericanEnglishSpeechAnalysisModels 1.0.0.0 is already installed and the session payload {C5CA53A2-E722-4D76-B5AC-71522CC48AB3} AmericanEnglishSpeechAnalysisModels 3.0.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Payload {A8798E04-96FF-4564-9157-0D4C89CB794C} DynamiclinkSupport 5.0.0.0 is already installed and the session payload {DE88AA40-6766-43D3-A755-8FC374B3D2C3} DynamiclinkSupport 6.0.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Checking payloads upgrade/conflict relationships : Failed with code 1
    WARNING: DW066: OS requirements not met for {42CED1DA-1C36-45D2-88C0-C32DB6B82B49} Adobe Premiere Pro CS6 6.0.0.0
    WARNING: DW066: OS requirements not met for {D094CE41-D4F5-473E-8915-B1D026CB193E} Adobe Premiere Pro CS6_AdobePremierePro6.0en_USLanguagePack 6.0.0.0
    ----------- Payload: {CC006FD6-00EF-46FC-ACA0-7A28EFF44D20} Adobe Media Encoder CS6 6.0.0.0 -----------
    ERROR: DF015: Unable to delete symlink "/Applications/Adobe Media Encoder CS6/Adobe Media Encoder CS6.app/Contents/Frameworks/AdobeXMP.framework/Resources"(Seq 647)
    ERROR: DW063: Command ARKDeleteSymlinkCommand failed.(Seq 647)
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Dynamic Link Media Server: Install failed
    ERROR: DW050:  - Adobe CSXS Infrastructure CS6: Install failed
    ERROR: DW050:  - Adobe Premiere Pro CS6: Failed due to Language Pack installation failure
    ERROR: DW050:  - Adobe Prelude CS6 Support: Install failed
    ERROR: DW050:  - Adobe ExtendScript Toolkit CS6: Install failed
    ERROR: DW050:  - Adobe Extension Manager CS6: Install failed
    ERROR: DW050:  - Adobe Bridge CS6: Install failed
    ERROR: DW050:  - AdobeHelp: Install failed
    ERROR: DW050:  - Adobe Prelude CS6_AdobePrelude1en_USLanguagePack: Install failed
    ERROR: DW050:  - AmericanEnglishSpeechAnalysisModels: Install failed
    ERROR: DW050:  - Adobe Media Encoder CS6: Install failed
    ERROR: DW050:  - Adobe Premiere Pro CS6 Support: Install failed
    ERROR: DW050:  - Adobe Premiere Pro CS6_AdobePremierePro6.0en_USLanguagePack: Install failed
    ERROR: DW050:  - Recommended Common Fonts Installation: Install failed
    ERROR: DW050:  - Adobe CSXS Extensions CS6: Install failed
    ERROR: DW050:  - Adobe Prelude CS6: Failed due to Language Pack installation failure

    Hi Mylenium. Yes it's me. I didn't want to pull Steve into this just yet hoping that there was an easier solution. I've gone 2 rounds now with Tech Support. The last advice they gave me was to uninstall all Adobe applications from my system, delete all the files that don't get removed when uninstalling (they gave me a whole list), run the Cleaner Tool, log in as the Root user and run the installer again. The same error came up so I'm starting to think that the problem may be more than an Adobe issue. Support told me to call back if the last solution didn't work and they would "send me to the next level". What a pain....

  • Export Media in Premiere Pro CS6 ONLY produces an Audio File in Media Encoder

    First, all the system info:
    Windows 7 Home Premium Service Pack 1
    Intel HD Graphics 3000 Display Adapter
    I’m using Premiere Pro CS6 Version 6.0.5 (001  (MC: 264587)) “Mighty Kilt”
    Version 6.0.3.1 (64 Bit) of Adobe Media Encoder CS6
    Other Adobe applications installed: AIR, Creative Cloud, Download Assistant, Encore CS6 Library, Flash Player 12 ActiveX, Flash Player 12 Plugin, Help Manager, Premiere Pro CS6, Premiere Pro CS6 Functional Content, Reader XI
    I’ve run check for updates on both Premiere Pro and Media Encoder and everything is up to date
    I'm producing a two disc, dual layer DVD set for 100 families of my son's marching band.
    I have a half hour "masterwork" of interviews, performance segments, rehearsal sequences, credits, etc that I've edited together complete with sound, etc.
    I also then have various other video segments from the season, some high quality (1920x1080) and some lower quality.
    Rather than import everything into Encore and have Encore transcode them all at the same quality, I wanted to ensure that the half-hour piece and certain other segments were transcoded as high quality as possible and given the largest file sizes I could and then transcode other segments at lower quality levels as needed so everything would fit on the discs.
    The company I'm using to duplicate/replicate the 100 DVDs from my Master DVD advised me to encode them FIRST in Premiere Pro as desired, and THEN import those files into Encore.
    I've used Adobe Media Encoder a lot to export the individual segments into files I could upload to Youtube and have had no problem for the last several months.
    But now, two things happen:
    1) AME automatically designates the "Output File" with an .aac extension (see attached)
    2) When I do an "Import As" of the AME encoded file in Encore it only loads an audio file (obviously)
    Huh?
    Here are the settings I use in my Export Media dialogue in Premiere Pro CS6:
    Format: MPEG2-DVD
    Preset: NTSC Widescreen High Quality
    Output Name (and filetype): ______ name with Save as Type of "Video Files(*.mpg)
    BOTH the "Export Video" and "Export Audio" boxes are checked (see attached screen print)
    Filters Tab: left as is, don't do anything here
    Multiplexer Tab:
    choose the "DVD" button (vs the "None" button)
    Bitrate Type: left as Variable which is what is selected as a default
    Video Tab:
    Codec: Reads MainConcept MPEG Video
    Quality: increase it to the max of 5
    TV Standard: NTSC
    Frame Rate: 29.97
    Field Order: None (Progressive)
    Pixel Aspect Ration: Widescreen 16:9
    Render at Maximum Depth box checked
    Bitrate Encoding: I choose CBR for my high quality segments and VBR 2-pass for my lower quality segments
    Bitrate: kick it up to the max for high qulaity segments, adjust as needed to get the filesize I want for my lower quality segments
    Audio Tab:
    Audio Format: Dolby Digital
    Codec: Dolby Digital
    Bitrate: At least 320, sometimes higher for the segments I want to be the highest quality
    I check the "Use Maximum Render Quality" box
    I chose "Queue" for everything and then let it run overnight
    And yes, the original media has BOTH a video track and an audio track that works (see Screenprint)
    So... what am I doing wrong, helpful experts????

    Larry, Mark, Jim & Bill -
    It is 1 am Tuesday morning and I'd do a primal scream if my family weren't all sleeping upstairs.
    Somewhere along the way, I either read or was given the advice to just skip AME, load my videos as timelines in Encore, and just do the transcoding there.
    I spent almost a day trying to figure out how to get "buttons" for my menus I was building (they weren't appearing in Encore's library like they should) and eventually found a simply workaround.
    So I then spent the last 24 hours or so building all my menus, creating small clips for my "motion menu" buttons, getting all that straightened away.
    Got really excited earlier tonight since it seemed like I was nearly finished and coming down the home stretch.
    I hit "build" in Encore, went away for a couple hours, and came back to find a big error message awaiting me telling me that "Encoding Failed."
    I have read a lot of posts, and the outlook is not good, or at least the possible solution not simple or short from a time perspective.
    I have a 100 families awaiting their DVD they've paid for that they initially were told they'd have by mid-February. I've been telling everybody that they would have it - guaranteed - by this weekend when there's a band festival that would be ideal for distribution. The DVD duplication company says they have to have it by Wed morning at the absolute latest. Meaning I've got about 24 hours to figure this out and burn my dual-layer masters of the two DVDs or once again tell people "I know I guaranteed you'd have it by this weekend, but I don't have it ready yet."
    Almost as importantly, I can't afford to keep spending the hours and hours and hours on this that I have. It's impacting my personal and professional life.
    Thus the primal scream.
    The posts I read about the encoding failure all pretty much advise that I use AME to do all the transcoding work. Which of course brings me squarely back to my original problem: I cannot get a video file out of AME.
    I'm embedding a screenshot of what I see when I click on the pull-down menu in the AME dialogue window. The problem: there is no MPEG2-DVD option listed to be chosen.
    Although I'm relatively new to forums, I've read enough posts by now that it seems like most people are in crisis mode when they post. So I realize my situation is not all that unique. But from a newbie rookie in the field to you experts, I REALLY could use some assistance right now, because between this and the long, cold winter we've had, I'm about to lose it.  :-)
    P.S. Mark, in answer to your question about frame rates, I have 18 different videos/films/projects that I'm including in my two DVD-set. There have probably been nearly 6-7 different cameras that have contributed footage to one or more of those films by borrowing camcorders of different brands and types and quality levels from people. Nearly every one of those 18 films have multi-camera sequences in them. And many films are collections of sequences which themselves are "nested sequences" sometimes three deep.  In otherwords, there is no way I can tell you all the various frame rates that may be represented among these 18 separate projects and I certainly can't go back and hope to change them all to the same one.
    Help. Please.  :-)

  • How do I get Premiere Pro CS6 off Creative Cloud?

    I have spent over 100 hours in Premiere Pro CS6 putting together four hours of complicated video (at least for me, a first timer) all with the end objective of producing two DVDs which I’ll replicate for the 100+ members of my son’s high school marching band.  So it came time to burn them to the DVD, make a menu, etc.
    Which brought me to the apparently complicated and confusing task of trying to first FIND – and then use – Encore.
    After reading many threads in multiple forums, it seemed what I needed to do was to download Premiere Pro CC, uninstall Premiere Pro CS6, leaving the box unchecked for Encore, and then use them together.
    I installed Premiere Pro CC. Opened a project apparently fine.
    Then realized that perhaps Encore was already available and accessible to me via CS6. So tried to open a project there…. and now none of my projects could open in CS6!!! I was getting the dreaded “Sequence not available” error message.
    I tried uninstalling CC just to see if that would fix it (since installing it seemed to cause the problem). Didn’t solve it.
    Then came upon an Adobe help page that seemed to imply if I uninstalled CS6, ran a cleaner utility, and then reinstalled it, it would likely fix it.
    So I uninstalled it.
    Then I went to Creative Cloud to download CS6... but I can’t find CS6 anywhere in Creative Cloud!!!! I got a "single-app" membershi to Creative Cloud in June of last year just for Premiere Pro. I never bought a DVD or anything so I THINK that's the only way I can re-install the program.
    Forget the nightmare of trying to figure out how to get Encore - I just want Premiere Pro back at this point. What the heck is a person supposed to do?

    John -
    Thanks for your patience in explaining the page number stuff to a "newbie."
    If I understood you correctly, was the ultimate URL you were suggesting I click on this one?
    http://tv.adobe.com/watch/davtechtable/using-premiere-pro-cc-encore-cs6-for-bluray-dvd-and -interactive-video-for-ipadatv-and-mobile-hd/
    If so..
    a) I already watched that due to finding it in another thread where I think you were the guy that posted it (thank you!)
    b) Those directions were in part why I uninstalled Premiere Pro CS6 in the first place
    c) That video does not address my problem: I can't find CS6 loaded in Creative Cloud
    However, your Indesign-related link DID address my problem. Thank you very much!!!

Maybe you are looking for