Premiere Pro CS6 Dynamic Link not working

Hi,
Just wondered if anyone has seen issues with the Dynamic link options in Premiere Pro CS6, all the options to work with After Effects are greyed out although this product is installed.
However I only have CS5 for after effects, is this a compatibility issue or am I doing something wrong here?
Thanks in advance for any assistance.
Kind Regards
Steve

Dynamic Link only works within one version, so you can't use it between CS6 and CS5 or CS5.5 and with older versions you had to have a complete suite, not individual products.

Similar Messages

Adobe Premiere Pro CS5 Dynamic Link not working as part of Production Premium CS5

I ran into a situation whereby I recently reinstalled my Production Premium CS 5 onto a new computer and when trying to run the Dynamic Link out of Premiere PRO CS 5 to create a new After Effects composition, After Effects tried to start up but then crashed with the error that Production Premium was needed.
Yet, I had Production Premium CS5.
(Note: The crash didn't occur when I simply tried to use Dynamic Link without anything selected in my project or timeline - but the moment I had a clip in my timeline selected to work on it, the dynamic link would not work as covered above.)
In checking around the forums I found various answers to this problem such as rebooting the computer, reformatting hard drives and/or whatever. This all may be correct.
However, as I just went through that nightmare, I was not anxious to do that again. So, I called Adobe and the following solution solved the matter in 5 minutes:
1. Close all your other Adobe applications such as After Effects.
2. Open up Premiere Pro CS5 and then deactivate it by going to HELP>DEACTIVATE and then Permanently Deactivate.
3.Close the application and restart Premiere Pro CS5.
4.Then do the same to Activate it.
5. Have your serial number handy and plug it in when prompted.
Solved it right away and worked beautifully.
Not to say there couldn't be more complicated situations, but the above worked and the simpler the better is good for me. And I thought I would post this in case anyone else ran into this problem.

Thanks for posting your solution.

Adobe Premiere pro CS6 effects presets not working

Presets in my Adobe Premiere pro CS6 is not working. What can I do? I need Work with Effect Presets
Message was edited by: Kevin Monahan

What do you mean "not working" What's not working? What are you wanting to do?
More information please.

Why Does Dynamic Link Not Work

I purchased the CS5 Adobe Production Premium. I have been working in Premiere and I have been learning about how to use Dynamic Link. I want to be able to alter clips in After Effects and bring them back and forth into Premiere. When I go to File/ Adobe Dynamic Link/New After Effect Composition, I get this message:
Adobe Dynamic Link Requires Adobe Production Premium.
Since I own production premium, I do not know why I am getting this message. I have reinstalled the CS5 Production Premium Software twice and it still gives me the same message. What can I do to get Dynamic Link Working.

Thank you for the tip. Could you possibly tell me how to deactivate and
then reactivate the suite. I am using a Macbook Pro laptop running OS
10.6.4. I do not even know where to start.
From:   Colin Brougham <[email protected]>
To:     Dan Seanor <[email protected]>
Date:   03/15/2011 09:55 AM
Subject:        Why Does Dynamic Link Not Work
Deactivate the software (not uninstall), and then reactivate the suite.
This often fixes this. You can opt to leave the serial number on the
system; no need to clear it and re-enter it.

Adobe Premiere Pro CS6 (mac) will not completely launch.

After a few weeks idol my Adobe Premiere Pro CS6 (mac) will not completely launch. It tells me a serious error has occurred, it shuts down and the circle continues. I've even reloaded the app and it happens again. I did upgraded to Yosemite but I can't find anyone else having probs with Yosemite. Any ideas. No luck on the adobe site.

>did upgraded to Yosemite
CS6 is about 3 years old... even the latest Cloud versions had to have updates to be compatible... since you have "reloaded" (was that a full uninstall and reinstall?) I have no other suggestions

Dynamic Link Not Working

To anyone that can help..
I am having several issues with adobe at the moment and really need some advice. i have tried adobe themselves, they struggled to help too, but that was mainly down to language issues.
I have a Canon XHA1S camera with an external shotgun mic Rodeo NGP-2. All of which at some point worked through premiere pro CS5 and encore. i was living the dream.
Then one day, it all started having issues.
Problem #1 - Dynamic Link stopped working
Once my project is done, i would send it to Encore via dynamic link and produce my DVD in either regular or blu ray. Now it doesn't. A box 'import premiere pro sequence' comes up but encore crashes before it can complete the import. sometimes a message telling me "the software thats used to decode the media is not available on this system. installing the correct decodes for the file your working with may help correct the problem" comes up too
Its strange that i've produced about 20 disks with no issues but now a problem. was told by adobe it could relate to the file/pixel size? but again have no idea why this is now a problem now and not before, in fact i would just be happy to know how to change it so it can work? Can anyone help?
Problem #2 - Audio
The only way i am able to make a disk at the moment is to produce it on DVD maker - it's the only way until i get my issues resolved. however my external mic is not coming through, this has something to do with the sound quality to the mic being 44.1 and the DVD maker requiring 48mhz. i can't seem to convert this to work in anything but AVI (would like MPEG-2) but then the picture quality drops to something similar to a tribul rubbing.
If anyone knows of something or can point me in the right direction i would be very greateful
Thanks

Especially for Bluray or DVD that is HD to SD, DL must sometimes be avoided.
But the type of problem you are having may indicate other problems. If regular projects are not working, see these:
Troubleshoot damaged projects in Encore on Windows
http://kb2.adobe.com/cps/406/kb406006.html
Troubleshoot system errors and freezes | Adobe software on Windows
http://kb2.adobe.com/cps/822/cpsid_82252.html
Regarding the audio, can't you just export as 48K?

I installed Premiere Pro CS6 and do not know where it is located.

Just like in the topic. I do not know how to run Premiere Pro CS6. Help pls.

Windows or Mac, part of the Cloud or from the individual purchase link... and other questions
-PPro Information FAQ http://forums.adobe.com/message/4200840

Premiere Pro CS6 Project Files Not Recognised by Windows

Gidday, I hope someone can help with this problem. Premiere Pro(and After Effects) have worked perfectly on my laptop up until now. Saved PP projects are not recognised by Windows 7. I can open a new project but once I save it, it is not recognised and won't open and I can't reset either as the default programs for those files. The applications are visible in the start menu so it is very strange as all were working fine last week and nothing has been done to the laptop in the meantime.
Anyone else come up against this problem?
Thanks
Steve

Steve, I just had this happen as well.
I used the Programs section of the Windows Control Panel to initiate an uninstall. On Adobe's Unistall setup screen (or whatever it may be called) I selected to uninstall PP only. When it was done I restarted and then installed PP only. And then it was back to "normal."

Dynamic Link not working in CS6

I'm working on a Mac on OS 10.7.4, dynamic link between Premiere Pro CS 6.0.2 keeps hanging up and won't successfully launch AE. Just to see if it was the individual project, I launched a new project and tried to link a single file and it did the same thing. I don't know if this is a preference thing or what, but any guidance is much appreciated.

Refer to this:
Could not complete your request because the DynamicLink Media Server is not available.
Mylenium

Encore-Premiere dynamic link not working

Hi. I've watched tutorials and think I understand this pretty well but it's simply not working. I import a Premiere sequence into an encore project and place it on a timeline. I then add some chapters (or make other changes) to the Premiere sequence and the encore timeline does not update. When I right click on the timeline video the option to "Update markers from source" is grayed out. Saving in Premiere doesn't help.
Thanks for any help offered. Sorry if I'm missing something obvious, but it's really a damper to productivity.
CS4 Production Premium, Win Vista Ultimate 64, NVidia GEForce 8800 with latest drivers, NVidia 7600 running a third monitor, Matrox Axio LE card, dual quad core Xeon, 20Gb ram, 5TB free HD space on a raid 0

>anyone know if that's coming back?
I seriously doubt it. Adobe bundles Encore with PPro to take care of DVD authoring. It might have been convenient, but I don't think there's sufficient demand for Adobe to consider re-implimenting it.
Try filing feature requests.
Cheers
Eddie
PremiereProPedia
RSS feed)
- Over 350 frequently answered questions
- Over 300 free tutorials
- Maintained by editors like
you
Forum FAQ

Adobe Premiere Pro CS6 crashes with not finding a capable play module on a windows desktop with a AMD Radeon R9 200 series board.

I installed Premiere Pro CS 6.0 on a brand new system.
Win 8.1,
i7 3.4 GHz on an Asus Sabertooth
16 Gig memory
AMD Radeon R9 290 Graphics Board with the latest drivers and Bios.
On starting Premiere I get the (as I noticed quite frequent appearing) error message that Premiere cannot find a capable play module and the suggestion to update my video drivers.
I tried everything I found in this forum or on the web:
Installed the latest drivers
Run the program as an administrator
Updated the Graphics board Bios
Updated Premiere CS6
Started Gpusniffer in CMD-mode to find out what board it found and added that to the cuda_supported_cards.txt in the Premiere directory.
All to no avail. The app will simply not start.
The Gpusniffers report states:
Loadlibrary “n” failed
Loadlibrary “n” failed
--- OpenGL Info ---
Vendor: ATI Technologies Inc.
Renderer: AMD Radeon R9 200 series
OpenGL Version: 4.4.13084 Compatability Profile Context 14.301.1001.0
GLSL Version 4.40
Monitors: 1
Monitor 0 properties –
Size: <0, 0, 1920 1080>
Mex texture size: 16384
Support non-power of two: 1
Shaders 444 :1
Shaders 422: 1
Shaders 420: 1
--- GPU Information Info –
Did not find any devices that support GPU computation.
As I invested a lot in the CS6 Master Collection I am not considering an update tot the CC version, also because the same problem occurs in that version too.
I would be much obliged if someone has an answer that truly will work. This problem costed me the best part of two days’ work and fouled up my workflow considerably.

==========
I tried to go into display settings and disable the Intel card. (this caused low resolution which is unexceptable)
==========
This makes me think it's using that graphics "card" ( probably built into mobo ? ...called 'onboard graphics ? )
This stuff gets tricky and sometimes the only way to make windows 'recognize' the pci graphics card is to actually take it out and boot, and then put it back in...
Then you get mssg " windows detected new hardware" and you install the drivers...
usually bios gives you choice of using onboard graphics or not ( but this too is wanky sometimes...sorry to say ...)
I recently ( this past year ) had a similar sort of situation but have a desktop, where its easy for me to take off side panel and pull the pci-e graphics card and boot, and get that horrible low res default screen...turn off, install card, reboot etc...
but anyway, it sounds to me like you're notebook is using that mobile graphics driver stuff and not the radeon. Somehow you've got to make it switch to that graphics card is maybe your solution.
sorry I dont have notebook but maybe someone else here does and can help more...
good luck.
ps..its always a weird fact of life...when things aren't working 'right' something has to get done fast....
edit:
I dont know how much you know about windows stuff, but after you disable that intel thing and get your low res screen.. you DID try to update the driver for that card using 'my computer / device manager ' right ??

Adobe Premiere Pro: Adobe Dynamic Link requires Adobe Production Premium?

Hi all!
We upgraded for some while ago from CS4 to CS5, but forgot to remove CS4 in the thrill of exploring CS5. It's two computers with Master Collection, but the problem I'm going to tell you about is only occuring on one of the computers.
We uninstalled CS4 from Computer 1. And after the unistallation of CS4, Dynamic Link between Premiere Pro, After Effects and Encore won't work.
Computer 2 has still CS4 installed, and the Dynamic Link works on that workstation.
These computers are both Win 7 64 bit.
How do I fix this? The Dynamic was such a nice part of the worklow.
Any updates that were recently published or any fixes or workaround. Cause we have tried to unistall and reinstall and unistall and reinstall and even ran the Clean Tool a few times.
Thanks for any help

HII!
Unistalled everything, from CS5, to Adobe player to Flash and ran the cleanupscript some times and ran CCleaner on the registry. After 6 reboots, I installed CS5 again, downloaded all updates and now it works!
Thanks for the help guys!

Dynamic Link not working AT ALL (CS5.5)

I've been trying to queue a sequence from Premiere Pro to Media Encoder (both CS5.5), and it says that Dynamic Link isn't working. I tried to make a new After Effects composition with my sequence through Dynamic Link, and it says that I don't have it installed (I do and can sucessfully open it). So, Dynamic Link doesn't work at all. Working on a Mac here. Help?

It's possible that something (e.g., antivirus software) is blocking the communication that Dynamic Link relies on.
See this for solutions to a closely related problem:
http://helpx.adobe.com/x-productkb/multi/startup-screen-hangs-premiere-after.html

Premiere Pro CS4 dynamic link to Encore CS4

I'm a newbe and I have a fundamental question about the Premiere Encore workflow. When I edit a project in Premier and I use the File>Dynamic Link>Send to Encore command, I get "Start New Project" from Encore. How do I update the edits I did in Premiere to a current project in Encore? Is there a way to Dynamic Link Premeire edits while I'm in Encore?

I have the exact same problem. I linked them together, but when I made the change in Premier Pro, the changes did not update in Encore. Everything
I read and watch on Adobe says it will happen automatically, but I'm not seeing it happen. Is there any way to replace an existing timeline in Encore with its updated sequence in Premier?

Premiere Pro CS5 Dynamic Link with AE CS5.5

Hi everyone,
I'm experiencing a problem with dynamic links. I have Premiere Pro CS5, AE CS5 and CS5.5 on my computer. When I do "replace with an After Effects comp" in Premiere Pro, it creates a Dynamic Link with AE CS5 and not CS5.5. Is there a way to tell Premiere to use CS5.5 version of AE and not CS5 ?
Fred

Not exactly Harm...
It's possible to import AE CS5 composition directly to PrPro CS5.5 via Adobe Dynamic Link, but not vice versa (i.e. it's impossible to import AE CS5.5 composition into PrPro CS5)

Premiere Pro CS6 Dynamic Link not working

Similar Messages

Maybe you are looking for