Premiere Pro CS6 feezes along with the rest of my computer

I'm going to be calling support tomorrow, but I thought I'd give a try here until I do.
My problem is when I use the 'guassian blur' effect on a jpeg file in my video track - the moment I change the blur value or interact with it in anyway the whole system will not respond.
My computer does not register any clicks I make although I can freely move my mouse
My mouse simply remains in the last cursor state before freezing. If it is the normal mouse arrow it will not change when moused over to areas that would normally make it change.
These are all signs showing that there is not more response from my computer at this point.
My only choice at this point is to force shut down my computer by holding down the power button.
I've tried uninstalling Premiere Pro and reinstalling it, the problem presists.
I know I have no errors external errors unrelated to Adobe because my computer was recently clean installed not less than a week ago.
I hope I've been able to explain this bizzare occurance.

File a bug report https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
Also, large pictures do sometimes cause crashes
Photo Scaling for Video http://forums.adobe.com/thread/450798
-Too Large May = Crash http://forums.adobe.com/thread/879967
-And another crash report http://forums.adobe.com/thread/973935

Similar Messages

Premiere Pro CS6 - video noise in the exported file

Hi everyone,
Im trying to make the transition from FCP7 to Premiere Pro CS6. I edited my first project with Premiere Pro and exported the sequence. However I noticed that the exported file had more video noise than the original clips.
The material is shot by Canon 5D Mark III and edited natively in the Premiere's timeline. Then they are exported to ProRes 422. After noticing the noise I exported the sequence as "match the sequence settings" and it created the .mpeg file. Same thing, there was noise. I then tried another other formats of that same clip and transcoded the Mark III footage to Xdcam EX 1080p before sending to premiere. Same thing, no matter what I did.
The only way i got the exported file to look the same as original file, was to convert the files before sending to ProRes 422, then edit those files in Premiere in the sequence thats settings are XDCAM EX 1080p and then to export it to ProRes422.
Do you have any thoughts for this. The noise I'm talking about is not a huge amount of noise but definitely noticeable if you look the FULL-HD material.
I really hope there is some setting I missed. Im using Mac pro 2009 and Macbook pro 2011.
Thanks
Thomas
mac

Hi Thomas
Try exporting by enabling "Render at maximum depth" and " Use maximum render quality" in the export dialogue window.

Premiere Pro CS6: GPU acceleration with GeForce GTX 600 series video cards?

Anyone know if Premiere Pro CS6 support GPU acceleration with the new GeForce GTX 600 series video cards?

1 - check the results at http://ppbm5.com/ to see which models are listed
2 - For "some" others, with at least 1Gig of video ram, use the nVidia Hack http://forums.adobe.com/thread/629557 - which is a simple entry in a "supported cards" file

Premiere Pro CS6 and CC with bad quality and incorrect colors in output video

Hi everyone!
I'm frustrated with my results after exporting a video with Adobe Premiere Pro (both CS6 and CC).
The color of the video output is slightly different to the original file (i've checked if it was a problem with my video player, but no, i've tested the video with WMP and others with no success).
Also the video quality is a little bad compared to the original file (i even tried to use frame blending once).
Notice that i'm not using any effects or anything alike, and i'm a begginer in video editing.
These are the parameters from the original video (made by Media Info software):
Format
: MPEG-4
Format profile
: Base Media
Codec ID
: isom
File size
: 1.70 GiB
Duration
: 1h 35mn
Overall bit rate mode
: Variable
Overall bit rate
: 2 540 Kbps
Encoded date
: UTC 2012-12-06 21:47:27
Tagged date
: UTC 2012-12-06 21:47:27
Video
ID
: 1
Format
: AVC
Format/Info
: Advanced Video Codec
Format profile
: [email protected]
Format settings, CABAC
: Yes
Format settings, ReFrames
: 4 frames
Codec ID
: avc1
Codec ID/Info
: Advanced Video Coding
Duration
: 1h 35mn
Bit rate
: 2 246 Kbps
Maximum bit rate
: 33.7 Mbps
Width
: 1 920 pixels
Height
: 816 pixels
Display aspect ratio
: 2.35:1
Frame rate mode
: Constant
Frame rate
: 23.976 fps
Color space
: YUV
Chroma subsampling
: 4:2:0
Bit depth
: 8 bits
Scan type
: Progressive
Bits/(Pixel*Frame)
: 0.060
Stream size
: 1.50 GiB (88%)
Title
: Video
Writing library
: x264 core 128 r2216 198a7ea
Encoding settings
: cabac=1 / ref=3 / deblock=1:1:1 / analyse=0x3:0x133 / me=umh / subme=10 / psy=1 / psy_rd=0.40:0.00 / mixed_ref=1 / me_range=24 / chroma_me=1 / trellis=2 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=-2 / threads=12 / lookahead_threads=2 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / bluray_compat=0 / constrained_intra=0 / bframes=3 / b_pyramid=2 / b_adapt=2 / b_bias=0 / direct=3 / weightb=1 / open_gop=0 / weightp=2 / keyint=250 / keyint_min=23 / scenecut=40 / intra_refresh=0 / rc_lookahead=60 / rc=2pass / mbtree=1 / bitrate=2246 / ratetol=1.0 / qcomp=0.60 / qpmin=0 / qpmax=69 / qpstep=4 / cplxblur=20.0 / qblur=0.5 / vbv_maxrate=25000 / vbv_bufsize=25000 / nal_hrd=none / ip_ratio=1.40 / aq=1:0.60
Encoded date
: UTC 2012-12-06 21:47:27
Tagged date
: UTC 2012-12-06 21:48:02
I'm exporting the video using almost the same parameters from the original file.
Here's a screen shot of my settings in Premiere:
As you can see in the printscreen, the settings only differ from the original file parameters in the bit rate (which i raised a little),
the TV standard (which i have no ideia what it changes), the level of H.264 (which i raised from 4.0 to 4.1, 5.0 and 5.1), and the bit rate encoding (which i've tried using CBR, VBR 1, and VBR 2).
Just for my curiosity...why these numbers in orange are so extensive? I mean, the original video is only 01:35:30:06 in final output (which is correct).
Notice that i do not use key frame distance (as i don't know what it does).
If i'm doing something wrong, please tell me.

Well if i do that, the video will raise up GBs larger (and that is really bad).
Why is it really bad?
Its a fact of digital life. High datarate = quality.
example ...even the Youtube preset is in the 8mpbs area.
...and you are exporting 1 hr 35mins of media.

Premiere Pro CS6 keeps crashing with only an error message from Windows. Restarted and tried everything else. Nothing works.

Title says it all...

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
•What is your exact brand/model graphics adapter (ATI or nVidia or ???)
•What is your exact graphics adapter driver version?
•Have you gone to the vendor web site to check for a newer driver?
•For Windows, do NOT rely on Windows Update to have current driver information
•-you need to go direct to the vendor web site and check updates for yourself
•ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
•nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us

Do you have to install iMovie 08 along with the rest of iLife 08?

iLife 08 will apparently work on a PowerPC G4 (which is what I have), but iMovie 08 requires a G5. Can I choose to download the rest of iLife 08 without downloading iMovie 08, or is it an "all-or-nothing" deal?

Thanks for the speedy response! I have just one more question (that I was actually leading up to with the other one). Once I load what I can of iLife 08, can I still download iMovie 06 HD even if I don't have iMovie 08? And if so, will iMovie 06 work with iDVD 08?
Thanks again!

HT4528 I just bought an IPhone 4s and when I plug it into my Windows 7 Toshiba it does not recoginze the phone...I have already removed the ITunes software along with the rest of the software and reinstalled...no go.I want to transfer phone video to my co

I just bought an IPhone 4s and plugged it into my Toshiba Windows 7 (64 bit) OS and it failed to recognize the phone. I checked in the tech community and discovered that I need to remove all the software assoicated with the phone and start over....I followed the sequence exactly...reinstalled the software and it still doesn't work. I am trying to download the IPhone 4s video to my computer and without a USB interface that works my memory capactiy will fill up fast....I've already been into the control panel....stopped and restarted the Apple service....I am stuck...can anyone offer some suggestions or knwo if there is a fix for this issue..??
Thanks,
Eric

I solved my own problem....I simply moved the cable to another port while moving the mouse to the USB ports on the opposite side of the computer....and the computr finally recognized the phone...I know it sounds weird but it worked...so if you are having the same problem that had trying removing all the crap you have plugged into the USB ports on your computer THEN plug in your IPhone 4s...use the cable that came with the phone and nothing else...good luck..>!!!

I tried to download firefox, but the homepage is now all blank except for the browser bar at the top!? Normally the firefox logo would be on the homepage, along with the rest of the homepage designs. Whats wrong?

When I downloaded firefox, the firefox home page was all blank, except for the browser bar at the top of the page. Normally, the logo would be on the homepage, in the center. Also, the other designs along both sides of the page are missing! What is wrong? I've tried at least 8 times to reload firfox to see if maybe it didn't load properly, but the same blank homepage appears! Can you email me with an answer please!?!? Thanks! Sal Cannone.

What is the home page?
*Tools > Options > General > Startup: Home page
*https://support.mozilla.com/kb/How+to+set+the+home+page
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.com/kb/Server+not+found
*https://support.mozilla.com/kb/Firewalls

Premiere Pro CS6 will not export the full project sequence

I have a project consisting of videos, photos, and audio. The full project is just over 12 minutes long. I can export it out in chunks, but when I try to export 11 or more minutes of it, I'm able to export new projects that are longer, but have less tracks, just fine.

Hi Distilledbullet,
Thanks for choosing adobe forums
Please provide following information ;
What is the OS and version ?
What is the Graphics Card installed on the system ?
How much Ram do you have ?
Do you use any external Hard Drive ?
Thanks
Sandeep

Premiere Pro CS6 Upgrade on new Windows 7 (64 Bit) computer

Some years ago I bought Prem Pro CS3 then Upgrade CS4. Tomorrow i collect a new computer Windows 7 Prof (64 Bit) 16GB Ram. I have bought CS6 Upgrade disc. My question is : what is the sequence of loading this software. Do I load CS3 then CS4 upgrade in XP Pro mode (32 Bit) then load CS6 in native 64 Bit. Confused.

Don't install anything except CS6. It will prompt you for your serial number...just enter the one for CS4.
If you did have the previous version installed, you would not be prompted for the serial number, but trust me that you DO NOT want to install the older versions unless you need them on your computer for some bizarre reason.
Also, if you ever did need the older versions, you wouldn't need to install them in XP Pro mode, it should install just fine as normal in Win7x64. It will of course run as a 32-bit app under CS3 or CS4, but the installer and Win7 are smart enough to figure it all out 99% of the time.

Premiere Pro CS6 does not recognize USB PnP Sound device connected to iMac OSX even when activated in Audio MIDI setup. The iMac(i-7 processor,16 GB) is working with this USB device without any problem

Premiere Pro CS6 does not recognize the USB PnP Sound device in order to produce a commentary sound track. The USB device has been activated on the iMac OSX by using the Audio-MIDI-setup and is working correctly with the iMac. When opening > presets >audio hardware I can only select between >standard >out integrated > digital input integrated >microphone integrated. USB PnP is not indicated at this place.
With the built-in microphone of the iMac I can produce the commentary sound track, but I would prefer a stand alone version for better quality.
Your help is highly appreciated. Thanks in advance, Annemarie!

I'm using a Logitech Webcam Pro 9000 (which has a microphone on the side). I have several other devices plugged into separate USB slots: a keyboard, a mouse, my iPhone, and a Roland keyboard midi controller.
I've considered that maybe the webcam/mic combo is the culprit. If USB doesn't work at a constant speed, that could very well be causing the issue! The sound begins to lag badly sometimes when it's working properly, so that there's a multisecond delay between speaking and hearing my voice repeated back over the mic which is another sign that something is wrong. I've also caught it making a strange electronic sound during its "hang" time once it stops taking sound input correctly.
Maybe I should try to use line-in and forgo USB altogether then. I think I'd need a preamp and some sort of converter for that since the Mac Mini lacks a powered mic jack. I'm only a newbie musician so I've never set up such a system but it might be a better solution in the long run.
I'll check to see if it hangs before or after my computer enters suspend mode, that's a good suggestion too. Thank you for your help!

Adobe premiere pro CS6 crashes whenever I move the timeline

Hi there, my Adobe Premiere pro CS6 crashes when moving the timeline or importing new clips. I have tried several things, I opened up a earlier project to try that and it was fine for a while, but after about 5-10mins of use it hit the same problem and would then always crash whenever I openend it and moved the timeline marker or added a new clip.
Another problem that may or may not be related, is that some clips are broken up into about 6 glitchy squares instead of the actual clip.
Any help would be much appreciated, thanks.

>an AMD 6670 GPU
What is your exact graphics adapter driver version?
Have you gone to the vendor web site to check for a newer driver?
-If Windows, do NOT rely on Windows Update to have current driver information
-you need to go direct to the vendor web site and check updates for yourself
ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool

Premiere Pro CS6 serious error has occurred, crash troubleshooting

ERROR MESSAGE: Sorry, a serious error has occurred that requires Adobe Premiere to shut down. We will attempt to save your current project
Problem: Starting last night Premiere would crash with this error message. This has been happening increasingly more over the past couple weeks, but starting last night and today - it has happened so much that I cannot get more than 5 minutes of work done without it crashing. It has happened on saves, renders, playback, switching active timelines, removing the mojo effect from a clip, and while sitting dormant. I’ve had the computer less than a year and hope that it is not a serious problem with my RAM or graphics card.
Using Premiere Pro CS6 - subscription based with latest update installed
SPECS:
MacBook Pro Retina, Mid 2012
Processor: 2.6 GHz Intel Core i7
Memory: 8 GB 1600 MHz DDR3
Graphics: NVIDIA GeForce GT 650 M 1024 MB
Software: OS X 10.9.1 (updated after problem started)
(nothing external from factory setup in terms of hardware)
Use an External USB 3.0 7200 RPM drive from OWC for project files
Use an External Seagate 3 TB drive for media storage
Using all DSLR footage from Canon 6D, Canon 5D mk II, and Canon 60D and audio from external recorders (.mov, .WAV, .wav files)
Third-party effects or codecs: Use Pluraleyes 3.0 and Mojo color from Red Giant
I realize this is a general error message and there are several forums posted from mostly more than 5 months ago. I cannot seem to find an answer that will help me. Here is what I have already tried:
1. updated to Maverick
2. checked for updates for Adobe software
3. Cleared the Media Cache
4. Switched from CUDA to software only
5. Updated CUDA and switched back to CUDA in premiere
6. Held SHIFT while starting up (nothing seems to happen or pop up on screen at least)
Next:
—Going to uninstall Premiere and reinstall.
Any suggestions or possible fixes are great appreciated. What should my next step be?

UPDATE:
STEP 1:
Uninstalled and reinstalled Premiere - worked without crashing for the longest time since yesterday. After 1 hour of running - it crashed once again with same error message and same report (see below).
Same as before:
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000000
STEP 2:
--Updated the RED GIANT plugin "mojo" (minor coloring software)
This worked for less than 10 mintues and then crashed again - but this time with different exeception details (I'm not sure what these mean)
Crashed Thread: 2
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
*** CFRelease() called with NULL ***
STEP 3:
Going off of the idea that it may be the plugin causing the issue (since it needed to be updated) I went into the project and deleted all of the files containing this effect in this project file (note: i have used this for 10+ projects on this computer with no trouble).
I thought it was fixed, from about 8:00 PM - 11:45 PM no crash - then as I was playing back clips - crashed again.
I have been loosely following these guidelines: http://helpx.adobe.com/x-productkb/global/troubleshoot-system-errors-freezes-mac.html
I am not sure where to go from here - should I continue into the "advanced troubleshooting" even though I'm not sure if any of these things are related.
IMPORTANT NOTE: I have launched two other Premiere Project Files (from previously completed projects) successfully without crashing. I tested a few things in the projects before returning to the problem project. If I suspect there is a problem with the file in particular - how do I find out what is causing the problem?
--I already removed MOJO effects thinking that could be the issue from the last files that were
--I have already gone back to a previous version from a week ago and imported the Sequence I needed. Still crashed.
I have sent 5+ reports to Adobe on the crash. Any feedback into this is much appreciated.

Playback Lag in Premiere Pro CS6 for Mac

I'm editing a project in Premiere Pro CS6 for Mac, and the playback is really laggy. Its fine if you're viewing one long clip, but it gets really laggy when it switches between clips. The sound will play, but the playback screen will be frozen on the last frame from the previous clip. I use the latest thin model of the iMac. Can anybody help me?

>Premiere Pro CS6 with the 6.0.0 update
Is there a specific reason you have not applied the bug fix updates?
All Adobe updates start here and select product, read to see if you need to install
updates in number order, or if the updates are cumulative for the individual product
http://www.adobe.com/downloads/updates/
Also, only having one hard drive means your computer is having to "struggle" with file operations
An EXAMPLE concerning trying to use only ONE Hard Drive for Video Editing
You are a music conductor, with a baton that you use to point to various parts of the
orchestra... this is like Windows pointing to various parts of the hard drive to do
Windows housekeeping or to load program segments for various functions
Now, at the same time and with the same hand... while still using the baton to conduct
the orchestra... pick up a bow and play a fiddle... this would be doing something with
your video file at the same time as all the other work
You as a person cannot do both at the same time with the same hand
A computer is a LITTLE better, in that it can switch from one kind of task to another
very quickly... but not quickly enough for EASY video editing
You need AT LEAST two hard drives (separate drives, never a partition
http://forums.adobe.com/thread/650708 for more on partitions) with Windows (or Mac OS)
and software on your boot drive, and video files on a 2nd drive so the boot drive is
not slowed down by trying to do everything
External eSata or USB3 are both fast enough for video editing... eSata is better -
http://forums.adobe.com/thread/1117813
Do not try to use USB2 for video editing, it is too slow
Dock with fan http://www.amazon.com/StarTech-SuperSpeed-Docking-Station-
Cooling/dp/B0055PL2YI

Audio not transferring to Encore from Premiere Pro CS6

I'm trying to export a sequence through the Adobe Dynamic Link from Premiere Pro CS6 to Encore and the audio is not transferring with video. The video is 30 minutes long with multiple video and audio tracks. The video came through fine, but no audio track. However, I also brought a timeline into the project that was less than 3 minutes and the audio track came with it. Any suggestions/help much appreciated! Thank you!

Yes--that is correct. Audio track in Premiere but no audio track present in Encore. I believe the audio format in Premiere is Stereo. It is HD footage shot on a C-100 camera. The sound was recorded into the camera and all brought in together. I did end up doing the work around that was suggested and just exported an MPEG2-DVD and pulled the audio in manually. But, would love to try to figure out how to make it work directly using Adobe Dynamic Link. Any suggestions are greatly appreciated!

Premiere Pro CS6 feezes along with the rest of my computer

Similar Messages

Maybe you are looking for