Premiere Pro CS6 for Broadcast ProRes HQ Frame rate issues

I switched from Avid to work on a quick project with DSLR footage shot on the 5D Mark III at 29.97 psf which is not to be confused with 29.97i, a standard frame rate necessary for broadcast. So the commercial spot was cut together, I punched in the proper settings (the very same settings that work with Avid 6.0+ and Final Cut Pro 7), and hit export. When exporting either a Quicktime Animation or Pro Res file from Premiere Pro CS6, premiere creates a file with a faulty framerate, it comes out as 28.4 instead of 29.97. I thought I was going crazy, but no, there are tons of documented experiences with 23.94 being 20-something, and on an on. It seems as if Adobe did not do a good enough job with integrating the Pro Res codec into their software. The only way I could get around it was to export to something else (Blu-ray H.264 at 29.97), and then re-encode that file to Pro Res HQ with either compressor or adobe media encoder. The problem lies in exporting progressive footage as interlaced, it just completely screws up the frame rate. The worst bit is that, I need Pro Res HQ for the distribution house for the commercial spots, they require the ProRes HQ MOV at 29.97i and if anything is off, I get charged for it.
Does anyone else have problems with Adobe Premiere lacking on the professional end? Or similar experience with this problem?
Just do a search for pro res frame rate issue premiere and you will see a lot of other users with the same issue.
Thanks,
C
System Config:
Mac OSX 10.8.2
2.7GHz Intel Core i7 MacBook Pro 15" Mid 2012
NVIDIA GeForce GT 650M 1024MB
16GB 1600 MHZ DDR3
256GB SSD + 750GB SATA (no CD/DVD)
Premiere Pro CS6 (latest)

Read the Warning here: http://ppbm7.com/index.php/tweakers-page/85-raid-or-not-to-raid

Similar Messages

Playback Lag in Premiere Pro CS6 for Mac

I'm editing a project in Premiere Pro CS6 for Mac, and the playback is really laggy. Its fine if you're viewing one long clip, but it gets really laggy when it switches between clips. The sound will play, but the playback screen will be frozen on the last frame from the previous clip. I use the latest thin model of the iMac. Can anybody help me?

>Premiere Pro CS6 with the 6.0.0 update
Is there a specific reason you have not applied the bug fix updates?
All Adobe updates start here and select product, read to see if you need to install
updates in number order, or if the updates are cumulative for the individual product
http://www.adobe.com/downloads/updates/
Also, only having one hard drive means your computer is having to "struggle" with file operations
An EXAMPLE concerning trying to use only ONE Hard Drive for Video Editing
You are a music conductor, with a baton that you use to point to various parts of the
orchestra... this is like Windows pointing to various parts of the hard drive to do
Windows housekeeping or to load program segments for various functions
Now, at the same time and with the same hand... while still using the baton to conduct
the orchestra... pick up a bow and play a fiddle... this would be doing something with
your video file at the same time as all the other work
You as a person cannot do both at the same time with the same hand
A computer is a LITTLE better, in that it can switch from one kind of task to another
very quickly... but not quickly enough for EASY video editing
You need AT LEAST two hard drives (separate drives, never a partition
http://forums.adobe.com/thread/650708 for more on partitions) with Windows (or Mac OS)
and software on your boot drive, and video files on a 2nd drive so the boot drive is
not slowed down by trying to do everything
External eSata or USB3 are both fast enough for video editing... eSata is better -
http://forums.adobe.com/thread/1117813
Do not try to use USB2 for video editing, it is too slow
Dock with fan http://www.amazon.com/StarTech-SuperSpeed-Docking-Station-
Cooling/dp/B0055PL2YI

How can I down a Adobe Premiere Pro CS6 for mac on a computer with windows7 system?

How can I down a Adobe Premiere Pro CS6 for mac on a computer with windows7 system?
Explanations with pics will be better.
Thanks.

Not sure what you are asking. A download is a download. what you do with the file afterwards is entirely up to you. If you mean to install Mac software on Win, then no, this can't be done. Furthermore you also would have to have a proper Win serial.
Order an Adobe product platform swap or language swap
Mylenium

Premiere Pro CS6 Creative Cloud & ProRes presets

I am using the Atamos Ninja 2 to capture footage from my Canon 5D Mark III. One of the options on the Ninja 2 is to capture using the ProRes HQ codec. I'd really like to be able to take the ProRes footage and use Premiere Pro CS6 (creative cloud) on my MacBook Pro (10.8.3). Is there any way to do this? I don't see ProRes presets available. I can import the footage, but can't drag and drop it into the timeline.

Joe Bloe,
Thanks. Here's what's interesting that I don't understand. I did what you pointed out previously. That works from a functionality perspective...sort of.
I originally captured at 30 fps (drop frame 29.97) on the Ninja 2 because of what I understood here:
http://atomos.activehosted.com/kb/article/codecfrres/when-should-i-use-24p
When I used the technique you described, the sequence settings were the same technically. But the editing mode listed is ARRI Cinema. There are still no presets I can see for ProRes. I'm not sure if the sequence that resulted from the steps you described are taking advaantage of the ProRes codec. And since I don't see any presets anywhere in PPro for ProRes, I'm still wondering how to get them in PPro.
I've seen this too:
http://blogs.adobe.com/VideoRoad/2011/08/a-prores-workflow-end-to-end.html
But I don;t understand how, in the above instructions, the option to select Apple ProRes in the Video Preview setting is available. Is this a difference in CS6 from earlier versions?
Btw, I have the latest version of Compressor (and Quicktime) installed so I should have the ProRes codecs available.
I also downloaded the folder of ProRes codecs for AME and imported them that was available here:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5411
This still doesn't make the presets available in PPRo.
What am I missing?
http://blogs.adobe.com/VideoRoad/2011/08/a-prores-workflow-end-to-end.htmljoe bloe premiere wrote:
When you create a new Project, you are initially presented
with a menu of Sequence types to choose from.
You can skip this step by hitting 'Cancel', import your media,
then do this to create a Sequence that matches your footage:
Or, select a media file, right-click and select "New Sequence From Clip".
-Josh

USB Mic not working in Premiere Pro CS6 for Mac

So I've been editing in Premiere Pro CS6 on a mac for 6 months now. I have to do a temp VO for a project and I thought I'd try the Narration feature in the mixer. For some reason my USB mic doesn't show up in the Audio Hardware so I can't pick it. The same mic shows up in the Mac Audio Settings and even shows up in Audition. I've been having to use Audition but was curious to see if anyone out there has gotten a USB mic to work in Premiere Pro on a Mac. Would be a really cool feature if it worked.
Greg Jones
D7,Inc.

Some USB mics work fine, but many do not. It can depend on the exact mic, or might require a different ASIO driver (maybe something like ASIO4All?), or different ASIO setting, to work.
Good luck,
Hunt

Premiere Pro CS6 error - black flashes on frames - Basic 3D bug?

I am currently working on a lyric music video which incorporates video and still image backgrounds with lyrics superimposed over the top in time to the music. I'm adding the lyrics by creating images with the words in Photoshop and then animating them (scrolling, spins, wipes, etc) in Premiere. All was going well until I tried a recent render and noitced that some effects were showing flashes of black on screen during text movement (flips or twists seem to be the culprit). I figured it was a render error but after trying a few different output methods and not curing the problem I realised I was getting the issue on the timeline when scrubbing through frame by frame. I've attached some images to demonstrate the problem. If I open an earlier saved version of the project then effect is fine on render and on scrubbing through the timeline. Have my later saved project files got corrupted at some point? If it was a software or hardware issue I would have expected it to have been happening from the outset but this effect has been fine until now. Is it fixable or do I have to go back a few versions and redo my recent work?
Ok I've just realised while grabbing the attached images that the black frames appear to be occurring on the first frame of each new text still image - I don't know if that helps with identifying the problem?
Ok another update - it appears to be the Basic 3D video effect that is causing the problem - if I remove that and have the text just appear then the black flashes go. But as I said above it worked fine in earlier project versions so it can work and isn't an inherent fault so I really hope I can find a solution and not have to remove the effect.
Really hoping someone can solve this for me, it's only a hobby video not a job but I've put a lot of hours in and am nearly finished so would be pretty bummed if I can't resolve the problem.
Thanks :-)

An update - this is definitely looking like a bug!
Each of the words is a separate Photoshop image cropped to the size of the word and I have then used the Basic 3D effect to rotate each image in turn from -90 degrees to 0 degrees so it appears on screen. Yesterday I tried changing the settings for the first clip and the black square disappeared if I reduced the range to -63 degrees to 0 degrees.
Success! Or so i thought. I moved the the next image and changed the range to -63 degreees to 0 degrees but the black square remained. In face I had to reduce the start rotation down to -58 degrees before the black square disappeared from that image. This progression continued with each subsequent clip needing a futher reduction the starting rotation so by the time I got to the last image I the start rotation had to come down from -90 degrees to around -20 degrees.
Defintely a bug? (It works the same whether I was using negative or positive start angles btw).
I'll try using a different file format for the word images in case it's an issue with Photoshop image

Exported Interlaced Video by SDK Exporter plugin for premiere pro cs6

Adobe Premiere Pro CS6 for Project Setting Sequence is XDCAM HD422 1080i25(50i)
I tested the Plugin AVI(Uncompress) ,output interlaced video OK no problem.
I use Premiere Pro CS6 r2 SDK
I am trying to build a plugin for interlaced video.
Problem occured when I modified by the program below:-
SDK_Exporter.cpp at subroutine RenderVideoFrame
for interlaced video with PrPixelFormat_BGRA_4444_8u or PrPixelFormat_VUYA_4444_8u
and set
renderParms.inRenderQuality = kPrRenderQuality_High;
fieldType.value.intValue = prFieldsUpperFirst;
mySettings->exportParamSuite->ChangeParam(exID, 0, ADBEVideoFieldType, &fieldType);
renderParms.inDeinterlace = kPrFalse;
renderParms.inDeinterlaceQuality =kPrRenderQuality_High;
SequenceRender_GetFrameReturnRec renderResult;
    resultS = mySettings->sequenceRenderSuite->RenderVideoFrame(mySettings->videoRenderID,
                                                                videoTime,
                                                                &renderParms,
                                                                kRenderCacheType_None,
                                                                &renderResult);
    mySettings->ppixSuite->GetPixels( renderResult.outFrame, PrPPixBufferAccess_ReadOnly, &frameBufferP);
In frameBufferP is only progressive frame not intelaced frame
Please advise what should I do in order to get interlaced frame.
Regards,
Putaporn

Adobe Premiere Pro CS6 for Project Setting Sequence is XDCAM HD422 1080i25(50i)
I tested the Plugin AVI(Uncompress) ,output interlaced video OK no problem.
I use Premiere Pro CS6 r2 SDK
I am trying to build a plugin for interlaced video.
Problem occured when I modified by the program below:-
SDK_Exporter.cpp at subroutine RenderVideoFrame
for interlaced video with PrPixelFormat_BGRA_4444_8u or PrPixelFormat_VUYA_4444_8u
and set
renderParms.inRenderQuality = kPrRenderQuality_High;
fieldType.value.intValue = prFieldsUpperFirst;
mySettings->exportParamSuite->ChangeParam(exID, 0, ADBEVideoFieldType, &fieldType);
renderParms.inDeinterlace = kPrFalse;
renderParms.inDeinterlaceQuality =kPrRenderQuality_High;
SequenceRender_GetFrameReturnRec renderResult;
    resultS = mySettings->sequenceRenderSuite->RenderVideoFrame(mySettings->videoRenderID,
                                                                videoTime,
                                                                &renderParms,
                                                                kRenderCacheType_None,
                                                                &renderResult);
    mySettings->ppixSuite->GetPixels( renderResult.outFrame, PrPPixBufferAccess_ReadOnly, &frameBufferP);
In frameBufferP is only progressive frame not intelaced frame
Please advise what should I do in order to get interlaced frame.
Regards,
Putaporn

Can choose 5.1 in Audition CS6 for monitoring, but not in Premiere Pro CS6

System: Z820, Win 7 Ultimate x64
Audio: Creative SoundBlaster Recon3D PCIe, Altec Lansing 5.1 speaker system
SW: Master Collection CS6
I've been using Premiere Pro CS6 for a while now, but only for stereo video projects. I recently started working on a short film and needed 5.1 Surround Sound as well. I created a 5.1 surround track in Au, and have been able to monitor the sound and surround panning effects in Au during development. Here are the Audio and Channel Mapping settings I used to get my 5.1 to work so I could monitor it:
As can be seen, I've chosen the default MME Device Class here, and all seems well. I have 6 channels identified and mapped to the right corners. I've also confirmed my Master Track in Au is 5.1 Surround. I exported a 5.1 WAV and imported it into Pr, into a 5.1 surround session, confirming that both the track where the WAV file landed and the Master are both 6 channels (and although the order is displayed differently, the content correctly mapped from Au into Pr).
Now, my fun began. When I monitor the audio in Pr, I hear only Stereo. So, I check my channel mapping in Pr, as shown below:
As can be seen here as well, I've chosen the 'default' Premiere Pro WDM Sound. I've learned that WDM is a newer version of MME and encapsulates all the functionality of MME. I'm not sure why Au uses MME and Pr uses WDM. However, as shown, with WDM chosen, I only have 2 channels in the mapping dialog to work with, not the 6 I have (and had in Au). Nothing I can do will produce those other four channels.
As seen in the drop down captured in the above screen grab, I also have ASIO4ALL installed, but that too only shows 2 channels in both Pr and Au. Interestingly, when I hover the mouse over the speaker selection in the ASIO4ALL control panel, it only indicates there are 2 channels (but indicates that there are 6 INPUT channels). The Creative SBZ Series ASIO option is no better, providing only 2 channels.
So, I was off to check my system settings, which are all shown below:
As seen above, Windows knows there is 5.1 surround on the system, and the Test available in the bottom left dialog proves that each speaker is configured and working correctly. Audition also knows there is 5.1 available on my system and uses it correctly as described earlier. However, Pr refuses to recognize this and as a result I am unable to monitor any 5.1 surround projects on my system. If neither Au nor Pr worked, then I'd mark it down as Sound Card or Driver issues, but since one Adobe product uses the system audio correctly, and the other doesn't, it leads me to believe that it is Pr who is at fault.
So, my question is this: Why won't Pr recognize my 6 output channels like Au does?
Any advice would be appreciated.
Cheers,
Shane

ryclark, I believe you are correct in that Au uses MME while Pr uses WDM, but both MME and WDM (which, according to the Microsoft specification, encapsulates ALL of the MME capabilities, and expands on them) are 5.1 capable. I can play my export from Au as a 6 channel interleaved WAV file as well as an AC3 conversion of that same file in both VLC and Windows Media Player and get the same 5.1 channel surround sound field I do from Au.
After more research, I'm beginning to think this might be a result of the fact that Pr is 64 bit and Au is still 32 bit in CS5.5 and 6. I don't know if Au CC is 64 bit, but if it is, I'd be interested to know if what I am seeing is reproducible in the CC versions of Pr and Au (to eliminate the 64 bit vs 32 bit argument). Some have suggested that perhaps the standard SB driver is only 32 bit, although it 'supports' 64 bit supposedly, but maybe Pr just can't handle that 32 (faux 64) bit driver. A possibility.
Thanks for the read and response. Seems lots of people are in this boat together. You have recommended elsewhere to use an external audio interface, but just to do 5.1 monitoring (I don't do any live recording to my PC, this if for movie sound post/mixing) sounds pretty clunky. At the least, I think I'd need not only an external audio device with at least 6 channels out, but a receiver to take those outputs, and 6 new audio speakers to connect to that AVR. I currently use my computer's soundcard, as you know, and your standard 5.1 powered computer speaker system attached to that. Not the best, I know, but at this point, I'm just going for surround, but THX, so it is sufficient ;-).
Cheers,
Shane

What is the export format for Iphone and Android (Premiere Pro CS6)?

For Iphone, Ipad and Android, what is the export format (Premiere Pro CS6) for watching videos ?

http://forums.adobe.com/message/5950682#5950682

FAQ: What are the best resources for Premiere Pro CS6?

Here are high quality resources for troubleshooting and tutorials related to Premiere Pro CS6.
Premiere Pro CS6 troubleshooting articles
Issue: I'm having trouble downloading and installing Premiere Pro CS6. What do I do?Answer: See troubleshooting documents, post in the appropriate forum, or contact support.
More info: http://blogs.adobe.com/aftereffects/2013/09/troubleshooting-issues-with-downloading-and-in stalling-after-effects.html
Issue: What are the system requirements for Premiere Pro CS6?See this article: http://helpx.adobe.com/premiere-pro/system-requirements.html#Adobe%20Premiere%20Pro%20CS6% 20system%20requirements
Issue: Why won't Premiere Pro CS6 play back AVCHD media?Answer: Update to Premiere Pro CS6 (6.0.5). Previous versions of CS6 had this issue.
More info: http://blogs.adobe.com/premierepro/2013/08/premiere-pro-cs6-6-0-4-update.html
Issue: Does Premiere Pro CS6 work with OS X 10.9 (Mavericks)?Answer: Yes, make sure you update to Premiere Pro CS6 (6.0.5)
More info: http://blogs.adobe.com/premierepro/2013/10/premiere-pro-and-mac-os-x-10-9-mavericks.html
Issue: Is there a trial available for Premiere Pro CS6?Answer: Yes, subscribe to the free version of Creative Cloud, then download the trial.
Issue: I'm having unexpected behavior in Premiere Pro CS6 and want to trash preferences. How do I do that?Answer: See this blog post: http://blogs.adobe.com/genesisproject/2011/02/premiere-pro-cs5-maintenance-two-great-tips. html#more-537
Issue: I'm getting errors related to QuickTime. What do I do?Answer: See this blog post for troubleshooting items related to QuickTime: http://blogs.adobe.com/aftereffects/2011/02/troubleshooting-quicktime-errors-with-after-ef fects.html
Premiere Pro CS6 tutorials
Issue: I'm new to Premiere Pro CS6. How do I get started?Answer: See this blog post: http://blogs.adobe.com/kevinmonahan/2011/05/20/getting-started-with-adobe-premiere-pro-cs4 -cs5-cs5-5/
Issue: I'm switching to Premiere Pro CS6 from Final Cut Pro 7. Are there any tips for me?Answer: See this article by Scott Simmons on Pro Video Coalition: http://provideocoalition.com/ssimmons/story/105_adobe_premiere_pro_cs6_questions_answered
Issue: I just switched to Premiere Pro CS6 from Final Cut Pro 7. Are there any missing features between the applications?Answer: See this article: http://provideocoalition.com/ssimmons/story/10_fcp_things_fcp_editors_might_be_missing_in_ adobe_premiere_pro_cs6
Issue: Are there any good, free Premiere Pro CS6 tutorials available?Answer: See these tutorials: http://library.creativecow.net/series/Premiere-Pro-Basics-CS6--above-with-Andrew-Devis
Issue: How do I optimize Premiere Pro CS6 for best performance?Answer: See this article: https://www.video2brain.com/en/courses/after-effects-premiere-pro-performance-workshop
Issue: How do I operate the multicam function in Premiere Pro CS6?See this article: http://provideocoalition.com/ssimmons/story/working_with_multicam_in_adobe_premiere_pro_cs 6

Hi ..
GO to website www.Apache.org
down load Apache tomcat server .
install it ...
Go to sun site
c and download jsp tutorials ...
Go to
(www.coreservlets.com)download book core servlets
u can find lots of nice books supported by sun on sunwebsite ...
Now u r equipped ....
start doing everything (R &D) on server ..
Join This JSP forum and ask any thing u didnt got ..or learn or get confused..
I thing once u go through this ..it will do all what u want
Hope it helps
Best of Luck :)
regds & take care

Premiere Pro CS6 to DaVinci Resolve Workflow

In his article at the link below, Walter Bicardi notes that because of errors generated when he attempted to export an EDL from Premiere Pro CS6 for import into Resolve, the EDL kept causing Resolve to crash and he had to send a flattened file of his timeline to Resolve and then use Resolves auto-scene detect feature to chop up the flattened file. He then sent a flattened file back to PP CS6.
http://www.biscardicreative.com/blog/2012/07/continuing-tales-of-an-fcp-switcher-cs6-workf low-for-now/
Is this the only way to send a project to Resolve from PP CS6? Is it possible to use XML, AAF, or EDL export to send the timeline to Resolve, or does this feature of PP simply not work the way it is supposed to? Or is the problem with Resolve?
Any information on how to export the timeline to Resolve without resorting to a flattened file would be greatly appreciated. The flattened file approach would work to a degree, but it is not really an adequate workflow in this day and age.
Thanks,
Kevin

I have been giving DaVinci Resolve 9 (Lite) a trial run this week.
So far, I have noticed it handles FCP-style XMLs better than EDLs. As long as you strip out any APP-based effects (Warp Stabiliser etc), and any Dynamic Links (AFX) it seems to handle general dissolves/levels just fine. I haven't tried it with mixed codecs yet (I've tried H264, XDCAM, ProRes and DPX so far). One potential work around, if you want to convert your entire timeline to DPX and not use Scene Detect, is click 'Send to Speedgrade'. It generates labelled bins with DPX sequences for all your clips. If it's short-form but high quality (say an ad for broadcast), you can swap the files around in the Conform room in DaVinci.
I noticed a few bumps with the EDLs, namely the timecodes not syncing up properly. This might be due to the footage (the project I tried had been shot on a 5D). Hence using the XMLs instead.

Premiere Pro CS6 - A low level exception has occurred in ImporterMPEG

Hi Adobe Community,
I'm having a bit of an issue with the ImporterMPEG.prm plugin for Premiere Pro CS6 that's causing playback and exporting issues.
Computer Specs: Win7 PC, NVIDIA GeForce 6150SE nForce 430 graphics card
Description: After playing back video for a while, Premiere will eventually start repeatedly reporting "A low level exception has occurred in ImporterMPEG". The preview player will be completely frozen, and I'll be unable to export. The exporting will fail with a generic "Unexpected error" message.
This issue has only started a week ago. Until now, I've been able to use Premiere Pro CS6 with no issues. If possible, I'd like to avoid upgrading to CC 2014, because the CS6 version was working fine before.
So far, I've tried a few things:
• Deactivating and reactivating (which, by the way, apparently doesn't help subscription users like me, per my recent chat with Adobe support on this issue)
• Uninstall and reinstall (I didn't know about the CC Cleaner tool at the time, so I haven't tried a clean uninstall yet)
• Change the Preview File Format in Sequence Settings (from I-Frame Only MPEG which had worked since I installed the software over a year ago to Microsoft AVI)
• Crying silently to myself (this did not help, the computer is cold and cruel)
• Clearing out the media cache (which I'd never done before and let it get up to ~75GB without me noticing)
• Moving the plugin from its location in Program Files, hoping that maybe Premiere Pro would notice it was missing and to try to find a new fresh one (it didn't work)
So far, only the Preview File Format change seemed to bring relief, but the bad behavior came back after about a week.
I'm thinking maybe the ImporterMPEG.prm plugin got corrupted somehow? The one notable thing I can remember with the computer in the last few weeks was a power event that shut down my computer unexpectedly. I think I had Premiere Pro open at the time.
If it's relevant, I mostly work with .AVI, .MP4, and .TS files in my projects, all varying resolutions and FPS. I'm usually working with about 1GB of files in a project, very rarely more than 2GB.
Has anyone else had this issue? Or, even better, has anyone else resolved this issue?
Thanks!

But really, the real solution for me was to not update Premiere Pro CS6 after a reinstall. The most recent updates just do not like my computer, I guess.
Figured I should post this solution here in case anyone in the future has this problem. (relevant: xkcd: Wisdom of the Ancients)
-Sam

Premiere Pro CS6 very bad YouTube quality.

Hello,
Before asking me to look further on google because there may be my answer, i say that i've searched/posted/asked everywhere i could.
I use fraps to record some in-game footages, the file bitrates are huge 500-900M, i then render them in premiere pro as i need to add an intro/ending and then i upload them (or i'm hardly trying to) on youtube.
The thing is I've used every setting I could ever find, contacted youtube users who managed to do it right, but after I upload the video on youtube, the quality is absolutely horrible.
Right after i render i check the video, the quality is perfect, after that I upload it to youtube and after processing the video, it looks like it has 1M bitrate, laggy.
Can anyone please help me to solve this problem?
Thanks!
RAW clip bitrate: 500-900M
Render settings from Premiere Pro CS6:
Format: H264
Resolution: 1280x720
Frames per second: 30
Field Order: Progressive
Aspect: Square Pixels (1.0)
TV Standard: NTSC
Profile: High
Level: 5.1
Render at Maximum depth: Checked
Bitrate settings:
Encoding: VBR, 2 pass
Maximum bitrate: 20M
Minimum bitrate: 20M
(Tried with smaller bitrates too, like 8/10/15, the output file wasnt so clear but youtube would still kill it)

OK. Here is what I have done.
I took took your crisp video of game play and dropped it on the New Item button to create a sequence. I checked the sequence and saw that the video was 1280X720 using 30 frames per second. Not 29.97, but 30. That could be relevant.
Then I took this screen shot of the video playing in Windows Media Player and in the Program Monitor of Premiere Pro. I see some degradation even at 30Mb/s which suprised me to be honest with you. I read through the YouTube help and they recommed 30Mb/s for 720p so I exported at 30Mb/s.
The easiest place to spot the degradation is in the space above the letter E (before the CK) in the upper left of the frame. Some of the texture is missing.Not much. It is ever so much softer. But I don't believe that it will prove to be relevant.
So, now it is time to upload to YouTube and see what happens.
Darn, I have no way to play the YouTube video at exactly 1280X720. I just have full screen and the larger box. Is there a way to do that? Other than setting my monitor for 720p or playing it on an old HDTV?
Oh well, here it is. Reasonably clean going in. How about coming out? Not so much. I am not happy with it. I am going to try again using CBR just for the heck of it. Crud. That didn't help. See for yourself.
I am stumped. Somebody with the capability to see it at the exact size speak up please. How is it done. (I use Chrome.)
Edit: I found a YouTube resizer that sets the medium box bigger - to 1280X720. I knew it had to be possible. But I am certainly not happy with the changes YouTube makes to a 30Mb/s file.
I am off to go try Vimeo.
Edit:
I am not happy with this either.
There is something about this video that makes it difficult for them to encode it. I have no idea what it might be. Perhaps the more technical among us can provide answers. It is not horrible, and it is better than 480p, but it isn't great.

Adobe Premiere Pro CS6 has stopped working when importing music (Windows 8)

I have a problem with Adobe premiere Pro CS6 on windows 8. When I use Premiere Pro CS6 for the first time, it's doesn't have any problem, but now I can't import music to Premiere Pro CS6 and it's say ''Adobe Premiere Pro CS6 has stopped working'', I don't know what should I do. How to fix it ?

>started roughly around the same time on both computers
Most likely cause is a Windows update that changed "something" about the video system
Check the vendor site (NOT Windows update) for a newer video driver
•ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
•nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us

Using Premiere Pro CS6, currently not able to capture video.

Using Premiere Pro CS6 along with Canopus ADVC100 as my capture device through a firewire port, but in the capture window, it only shows black. I've tried all different settings. I've always been able to capture in the past. I had the AOL Tech Gurus check my computer and all ports and everything is working properly. I've even switched out the firewire cable, as well as used a different ADVC100 and different firewire ports, though it still is not working. I did see video for a few seconds without sound, but it went away. When I do power up the ADVC, it immediately starts up Premiere Pro CS6, so my computer is recognizing the ADVC100. I'm wondering if something within my computer is conflicting with the capture.
- Arlen

Thanks cvid01 for jumping in -
Where would I see the ADVC100 as the Capture Device aside from the drop down window in Device Control where I can choose it to be the Device Control?
It's always worked with the Device Control Device showing "None". And the ADVC100 has always worked in the past with Premiere Pro CS6 for all my Captures.
Also, my Premiere Pro CS6 starts up once I power up the ADVC100. Though I have even closed the Premiere Pro CS6 after it opened up, and restarted the program.
Just wondering if the program itself has some sort of bug now in the capture window? Is there a Premiere Pro CS6 fix that will solve the issue?
Here is what my capture window shows:

Premiere Pro CS6 for Broadcast ProRes HQ Frame rate issues

Similar Messages

Maybe you are looking for