Premiere Pro CS6 not loading/linking preview files - any suggestions?

MacPro 2010, 16-core, 2.66 GHz, 32GB RAM, Quadro 4000, OS X 10.7.4
When I save a Project and then reopen it, Premiere Pro CS 6.01 does not load the Preview Files from the Renders. I have checked the specified Preview Files location and the files are there.
In order to work, I must render the entire Project again - which is too time-consuming and counter-productive.
Am I doing something wrong? Any help would be greatly appreciated.

Same problem. I've done many projects in CS6 and this is the first time it's happened. FIrst half of the timeline was fine but the second half of the timeline, that was previously fully rendered, couldn't locate the preveiw files. The preview files are still in the preview folder but it doesn't see them in the timeline anymore. How do you delete those preview files since they are no longer recognized in the timeline? I know you can manually delete them in the preview folder by playing them and matching them to the video clips in the timeline.

Similar Messages

My Acrobat Pro will not open my PDF Files any suggestions?

My acrobat pro does not open, anyone else out there with the same problem?

Sherbear2359 (I believe that the US has the right to arm bears so I will be very nice.)
My Adobe Acrobat stopped opening pdfs. Now in the past it was Windows 8.1 playing tricks by thinking that the Adobe software was a trial which expired
Doesn't launch after 30 days | Installed as part of a CS6 suite Tried it and it worked.
Tried the fix again now no change.
I suspect that a Microsoft patch stuffed it up. They have had a few problems.
I used Reader with open with but I want pdf to be opened by Adobe.
Thanks

Premiere Pro CS6 not playing audio on imported MP4 files.

I am editing a series of MP4 clips shot with a Canon Vixia, and for some reason, Premiere Pro CS6 will not play the audio on a few of the imported files. All of the clips were videotaped with the same camera. I know that there is audio on the clips in question, because it works fine when they are opened in Windows Media Player. I have deleted and reimported the faulty files, to no avail. I noticed in the online discussions that several others have had this problem; but I haven't been ablet o find an online fix thus far. I would greatly appreciate advice on this!

I have a Canon Vixia HFS100, which saves AVCHD files to an SD card... exactly what model is your camera?
If you are copying from an SD card to your hard drive, read these two links
Metadata contained in folder http://forums.adobe.com/thread/1015001?tstart=0
-and http://helpx.adobe.com/premiere-pro/using/transferring-importing-files.html

Export Media in Premiere Pro CS6 ONLY produces an Audio File in Media Encoder

First, all the system info:
Windows 7 Home Premium Service Pack 1
Intel HD Graphics 3000 Display Adapter
I’m using Premiere Pro CS6 Version 6.0.5 (001 (MC: 264587)) “Mighty Kilt”
Version 6.0.3.1 (64 Bit) of Adobe Media Encoder CS6
Other Adobe applications installed: AIR, Creative Cloud, Download Assistant, Encore CS6 Library, Flash Player 12 ActiveX, Flash Player 12 Plugin, Help Manager, Premiere Pro CS6, Premiere Pro CS6 Functional Content, Reader XI
I’ve run check for updates on both Premiere Pro and Media Encoder and everything is up to date
I'm producing a two disc, dual layer DVD set for 100 families of my son's marching band.
I have a half hour "masterwork" of interviews, performance segments, rehearsal sequences, credits, etc that I've edited together complete with sound, etc.
I also then have various other video segments from the season, some high quality (1920x1080) and some lower quality.
Rather than import everything into Encore and have Encore transcode them all at the same quality, I wanted to ensure that the half-hour piece and certain other segments were transcoded as high quality as possible and given the largest file sizes I could and then transcode other segments at lower quality levels as needed so everything would fit on the discs.
The company I'm using to duplicate/replicate the 100 DVDs from my Master DVD advised me to encode them FIRST in Premiere Pro as desired, and THEN import those files into Encore.
I've used Adobe Media Encoder a lot to export the individual segments into files I could upload to Youtube and have had no problem for the last several months.
But now, two things happen:
1) AME automatically designates the "Output File" with an .aac extension (see attached)
2) When I do an "Import As" of the AME encoded file in Encore it only loads an audio file (obviously)
Huh?
Here are the settings I use in my Export Media dialogue in Premiere Pro CS6:
Format: MPEG2-DVD
Preset: NTSC Widescreen High Quality
Output Name (and filetype): ______ name with Save as Type of "Video Files(*.mpg)
BOTH the "Export Video" and "Export Audio" boxes are checked (see attached screen print)
Filters Tab: left as is, don't do anything here
Multiplexer Tab:
choose the "DVD" button (vs the "None" button)
Bitrate Type: left as Variable which is what is selected as a default
Video Tab:
Codec: Reads MainConcept MPEG Video
Quality: increase it to the max of 5
TV Standard: NTSC
Frame Rate: 29.97
Field Order: None (Progressive)
Pixel Aspect Ration: Widescreen 16:9
Render at Maximum Depth box checked
Bitrate Encoding: I choose CBR for my high quality segments and VBR 2-pass for my lower quality segments
Bitrate: kick it up to the max for high qulaity segments, adjust as needed to get the filesize I want for my lower quality segments
Audio Tab:
Audio Format: Dolby Digital
Codec: Dolby Digital
Bitrate: At least 320, sometimes higher for the segments I want to be the highest quality
I check the "Use Maximum Render Quality" box
I chose "Queue" for everything and then let it run overnight
And yes, the original media has BOTH a video track and an audio track that works (see Screenprint)
So... what am I doing wrong, helpful experts????

Larry, Mark, Jim & Bill -
It is 1 am Tuesday morning and I'd do a primal scream if my family weren't all sleeping upstairs.
Somewhere along the way, I either read or was given the advice to just skip AME, load my videos as timelines in Encore, and just do the transcoding there.
I spent almost a day trying to figure out how to get "buttons" for my menus I was building (they weren't appearing in Encore's library like they should) and eventually found a simply workaround.
So I then spent the last 24 hours or so building all my menus, creating small clips for my "motion menu" buttons, getting all that straightened away.
Got really excited earlier tonight since it seemed like I was nearly finished and coming down the home stretch.
I hit "build" in Encore, went away for a couple hours, and came back to find a big error message awaiting me telling me that "Encoding Failed."
I have read a lot of posts, and the outlook is not good, or at least the possible solution not simple or short from a time perspective.
I have a 100 families awaiting their DVD they've paid for that they initially were told they'd have by mid-February. I've been telling everybody that they would have it - guaranteed - by this weekend when there's a band festival that would be ideal for distribution. The DVD duplication company says they have to have it by Wed morning at the absolute latest. Meaning I've got about 24 hours to figure this out and burn my dual-layer masters of the two DVDs or once again tell people "I know I guaranteed you'd have it by this weekend, but I don't have it ready yet."
Almost as importantly, I can't afford to keep spending the hours and hours and hours on this that I have. It's impacting my personal and professional life.
Thus the primal scream.
The posts I read about the encoding failure all pretty much advise that I use AME to do all the transcoding work. Which of course brings me squarely back to my original problem: I cannot get a video file out of AME.
I'm embedding a screenshot of what I see when I click on the pull-down menu in the AME dialogue window. The problem: there is no MPEG2-DVD option listed to be chosen.
Although I'm relatively new to forums, I've read enough posts by now that it seems like most people are in crisis mode when they post. So I realize my situation is not all that unique. But from a newbie rookie in the field to you experts, I REALLY could use some assistance right now, because between this and the long, cold winter we've had, I'm about to lose it. :-)
P.S. Mark, in answer to your question about frame rates, I have 18 different videos/films/projects that I'm including in my two DVD-set. There have probably been nearly 6-7 different cameras that have contributed footage to one or more of those films by borrowing camcorders of different brands and types and quality levels from people. Nearly every one of those 18 films have multi-camera sequences in them. And many films are collections of sequences which themselves are "nested sequences" sometimes three deep. In otherwords, there is no way I can tell you all the various frame rates that may be represented among these 18 separate projects and I certainly can't go back and hope to change them all to the same one.
Help. Please. :-)

After Effects CS6 and Premiere Pro CS6 not available for installation for 32-bit systems

After Effects CS6 and Premiere Pro CS6 require a 64-bit operating system and processor to be installed and run.
If you subscribe to Creative Cloud but use a 32-bit computer system, you will not be able to download and install Premiere Pro CS6 or After Effects CS6.
This issue primarily affects users on the Windows operating system, since all supported versions of the Mac OSX operating system are able to run 64-bit applications.
See this document for details:
"64-bit Windows required for After Effects and Premiere Pro CS6"
In general, you can only download and use applications for which your computer system meets the minimum system requirements.
Premiere Pro system requirements
After Effects system requirements

Who's says that Microsoft can't debug?
I used msconfig, first disabling startup items, -same result.
Enabled all startup items, disabled all non-microsoft services - AE worked!
I re-enabled each service in turn until AE crashed.
The fault was related to an item for a video streaming device I have in my house. It was Monsoon-multimedia's Vulkano Service. Sometimes under the old name of Hava, this is an app that acts like a sling-box to send my Cable TV to my screen. It does load a couple of virtual devices in device manager, and uses a proprietary codec.
I uninstalled the vulkano streamer application and rebooted the external Vulkano device. I reinstalled the Vulkano and verified it connected to the device and could stream. Once it did, I tried AE again and IT WORKED!
I wonder if simply rebooting the Vulkano would have fixed it. Its like opening the garage door to turn on the refridgerator.
Thanks for the help!
Jim

Premiere Pro CS6: No sound importing .mts files

Hey,
My Setup:
- Adobe Premiere Pro CS6
- Windows 7 x64
My Problem:
I bought a DLSM (Panasonic Lumix G6H) and recorded five hours of footage using AVCHD 50p. I imported the .mts files into Premiere and got no sound at all. Whenever I open the .mts with VLC or WMP there is sound.
I spent numerous hours trying to find a solution for this problem, but unfortunately none of them worked for me.
At this point I'm quite frustrated, I NEVER create accounts to ask questions, because usually they are answered - but this time i couldnt manage to overcome this issue.
I already tried:
1) Copy the entire folder structure - didnt work
2) Rename the .mts to .m2ts - didnt work
3) Using the Media-Browser when importing the files - didnt work
4) Rename it to .avi - didnt work
5) Downloaded "Any Video Converter" as my last resort.. there is no option for 50p .m2ts (which might work) - not satisfying

More information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840
Are you allowing time for conforming?
Read Bill Hunt on Audio Conforming http://forums.adobe.com/thread/726693

Premiere Pro CS6 Randomly Crashes During Preview

Hello,
I've searched and gone through various threads where crashing has been posted and none of the solutions have helped thus far.
There are two issues that I would encounter doing the most basic of tasks such as previewing a clip within Premiere Pro CS6:
- The preview screen will freeze and I am unable to see the video.
- The program will cause my video driver to encounter a serious problem and recover.
Here are my specifications:
Sony Vaio
Windows 7 Home Premium 64-bit Operating System
Intel Core i5 2.40ghz
8 Gigs of Ram
ATI Radeon HD 6470m Graphics Card
The temporary solution to both that I have found effective is closing down the program, then opening task manager, ending the Adobe Premiere process and restarting Adobe Premiere. If I don't do this then the program can't be opened.
Here are some of the solutions I've implemented without any positive changes:
- Ensured display driver / graphics card is updated (ATI Radeon HD 6470m)
- Closed all other programs
- Couldn't change GPU acceleration because the video card doesn't allow it.
- Disabled Hover Scrub
I've spent a few days researching this and I'm very sorry for posting a question in regards to this issue. However, I can't seem to find the help I need from Support because their phone system is down and I can't use the ticketing system because I'm using the Adobe Creative Cloud. I would appreciate any help in advance. Thank you.

Just finished the phone call from Adobe support.
The solution to the problem is if Premiere freezes, create a new sequence and import your video into the new sequence. He didn't know the specifics of what caused the issue, but should it happen again, I'd have to just tansfer the video into a new sequence. my project has not malfunctioned in the past hour.

Premiere Pro CS6 not locating media, freezing

For the last couple of days, Premiere Pro on my laptop (15" Apple Retina MacBook Pro, 12gb ram, 2.7GHz i7 - USB 3.0 Lacie drive) has been having trouble locating media. When I open a project, the "Locating Media" diologe shows the progress bar start moving, then stop and not move again. Hitting "Cancel" makes the pinwheel of patience come up. When I use the "Command + Option + ESC" command, Premiere Pro CS6 is not shown as "Not Responding". Force quitting the app and restarting the computer doesn't do anything to change this behavior.
Would appreciate any guidence on how to remedy this.

Good Day,
I am using Premiere Pro CS6 and I have been been doing metalogging for my film. I am having this issue of locating media when I changed my project over from a failing hard drive to a new one, I left the project on OVERNIGHT to locate media and its in the same spot. With such metalogging I have only been changing the names and descriptions of the files in the bin and I have a good few days work done on it. Is there any way to save the integrity of that bin without having to start an entirely new project over and start from scratch. This is most annoying.
I don't believe I have any corrupt rendered files, perhaps its a corrupted video?
Any help would be appreciated as I see no fix or announcement has come up for this problem yet.

Adobe Premiere Pro CC not opening an xml file created in Adobe Premiere Pro CC 2014

Hello,
I had created a project using Adobe Premiere CC 2014 which had some minor changes, which were going to be done by my boss, who uses Premiere Pro CC. However the project file of Adobe Premiere CC 2014 was not getting opened in Premiere Pro CC giving a message of type that as this file was created in a newer version of Premiere, it cannot be opened. After searching on this forum I found that we have to convert the Premiere Pro CC 2014 project file to XML file which can be then imported onto Premiere CC. So I created a XML file by selecting File-> Export -> Final Cut Pro XML and sent it to my boss. However even the xml file is not getting opened after being imported onto Premiere Pro CC giving an error of sorts, Cannot open the file since there is a problem with the codecs.
Have I done something wrong? Please guide me since I am a beginner to the Adobe environment and would very much appreciate any help.
Thank you.

Indeed..... but are they fully documented, includuing Adobe's implementation of Multicam?
Collapsing them should really be no more than a day or two of work for an Adobe engineer and a day of beta testing. Seriously. Lots of people want this - it only takes a few minutes with google to find people struggling with this exact problem. Premiere Pro Multicam --> Resolve.
Since we do a lot of multicam work it's something that's important to us.
Lots of other people never go near multicam, so I guess for them it's something they really don't care about.
I currently have > 22 hours of multicam sequences that need primary colour correction and follow on grading..... resolve would be the best choice by far.

Premiere Pro CS6 not locating media?

For the last couple of days, Premiere Pro on my laptop (15" Apple Retina MacBook Pro) has been having trouble locating media. When I open a project, the "Locating Media" diologe shows the progress bar start moving, then stop and not move again. When I use the "Command + Option + ESC" command, Premiere Pro CS6 is not shown as "Not Responding". Force quitting and restarting doesn't do anything to change this behavior.
Would appreciate any guidence on how to remedy this.

The Premiere forum is your friend.
Mylenium

Does Adobe Premiere Pro CS6 not support the Quadro K2000D GPU card?

I can't get the Premiere Pro CS6 to recognize that Quadro K2000D is installed on my computer. I'm running Windows 7. I see in the list that Quatro 2000D and Quatro K2000 is listed as supported but I haven't come across Quatro K2000D.

If your nVidia card has at least 1Gig of video ram, use the nVidia Hack http://forums.adobe.com/thread/629557 - which is a simple entry in a "supported cards" file

Premiere Pro CS6 stopped loading correctly - will not load new or existing projects?

It's been about a month since was last editing a project succesfully. When I try to load a new or existing projecet, I get the error message "Adobe premiere pro has stopped working. Windows is searching for a solution..." But there is no solution given, it just closes. I have tried updating my NVIDIA driver with no luck. I am running on Windows 8.1 64 bit. Anyone else have a similar problem?

Thanks for your reply, GautamBahl.
So I did have two graphics cards running, disabled the onboard one and still did not work.
I created a new admin account on my PC, and I am able to create a new project in Premiere now (am not able to while signed into my original account). Since all of my files and settings are on my original Windows account, I would like to get it working on that account. Do my findings give any indication as to how to fix the problem so that I am able to run Premiere signed in to my normal user account?
I appreciate the feedback!

Premiere Pro CS6 not recognizing audio in imported video

I'm a bit of a Premiere Pro novice, and I just started working with CS6. For some reason, when I import an h264 .mp4 video clip into my bin (via dragging it from a Finder window), then place it on my timeline, there's no audio. Same goes for export. I know for a fact that the source file did have audio; what am I doing wrong?

What camera make/model is the source?
Did you copy the entire folder from the camera to your hard drive?
Metadata contained in folder http://forums.adobe.com/thread/1015001?tstart=0
More information needed for someone to help... click these links and provide the requested information
-http://forums.adobe.com/message/4200840
-http://forums.adobe.com/thread/416679
-http://forums.adobe.com/thread/419406

Premiere Pro CS6 Crashes when exporting H264 files

I shot a video with Canon 5D Mark III (1080p) and edited a 4 minute video which I am trying to export as an H264 file. I used the preset for Vimeo 29.97, 1080. But every time the export stops half way and premiere Crashes. I tired 5,6 times and each time it workds for 2-3 hours before crashing. It actually succeeded once but the audio had some issues. After that I could not export again! Any suggesions?
I am using a Mac book Pro 15 inch, mid 2009, 8gb ram, running Mountain Lion and have the latest updates for Premiere installed.
Thanks

Try deleting all previous instances and partially-exported versions of the file. Then open a different Premiere Pro project (it doesn't matter which one; even a new project will do). Go to Edit>Preferenes>Media and click on the Clean button. Close Pr, open your problem project and try to export again.
Jeff

Premiere Pro CS6 won't play imported files even after changing format, etc?

Camera: Canon Legria HFM41
Video file format: MTS (1920 x 1080)
For the past few days I've been trying to understand why my video files won't play in Premiere, I'll import them, and when I press play the audio will work, but the video will play smoothly for only a few seconds then stop, skipping frames/slowing the speed of the video - I've read a lot of these forums on similar issues, then I tried converting the format to avi/mp4 and they still won't play smoothly when importing to Premiere Pro.. Does anyone know what I may be doing wrong/how to solve this.. Thank you!
Shanna

More information needed for someone to help... click these links and provide the
requested information
-http://forums.adobe.com/message/4200840
-http://forums.adobe.com/thread/416679
-http://forums.adobe.com/thread/419406

Premiere Pro CS6 not loading/linking preview files - any suggestions?

Similar Messages

Maybe you are looking for