Premiere Pro CS6 stopped loading correctly - will not load new or existing projects?

It's been about a month since was last editing a project succesfully. When I try to load a new or existing projecet, I get the error message "Adobe premiere pro has stopped working. Windows is searching for a solution..." But there is no solution given, it just closes. I have tried updating my NVIDIA driver with no luck. I am running on Windows 8.1 64 bit. Anyone else have a similar problem?

Thanks for your reply, GautamBahl.
So I did have two graphics cards running, disabled the onboard one and still did not work.
I created a new admin account on my PC, and I am able to create a new project in Premiere now (am not able to while signed into my original account). Since all of my files and settings are on my original Windows account, I would like to get it working on that account. Do my findings give any indication as to how to fix the problem so that I am able to run Premiere signed in to my normal user account?
I appreciate the feedback!

Similar Messages

My MacBook Pro (OS 10.7.2) will not load some sellers websites that bounce through yahoo.

My MacBook Pro (OS 10.7.2) will not load some sellers websites that bounce through yahoo. Other Macs on same network work fine. I have reset Safari, tried other browsers, eliminated cookies..... to no avail. All computers running 10.7.2. I have reset Safari, tried other browsers, trashed out cookies. This has me baffled. My other macs running the same OS version work fine. Flash is up to date and have done the current software update. Any help please. I have not blocked any sites and am administator for all machines. I have tried signing in as Guest. Nothing works.

After searching other users questions with related problem, I found that VirusBarrier 6 was the issue. Reconfigured settings there and problem solved.

I recently saved a draft email using mail, but now whenever I try to reopen it, it says loading but will not load. All my other drafts load fine except for this one. Is there a way to access the draft outside of mail?

I recently saved a draft email using mail, but now whenever I try to reopen it, it says loading but will not load. All my other drafts load fine except for this one. Is there a way to access the draft outside of mail?

Create a new profile as a test to check if your current profile is causing the problems. <br>
See '''Creating a profile''':
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem <br>
'''Profile Backup and Restore'''
*http://kb.mozillazine.org/Profile_backup
*https://support.mozilla.org/en-US/kb/back-and-restore-information-firefox-profiles
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Error during start up of Premiere Pro CS6. "... could not find any capable video play modules..."

During start up of Adobe Premiere Pro CS6, I get the following error message. "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again." This does not occur on After Effects, and the program runs successfully. Premiere Pro will not open, and in the start up window the last thing the status line states before the error message occurs is: "Loading ImporterQuikTime.prm"
I have added an NVidia GPU card to my system and have installed the latest video drivers from the NVidida website (GeForce 310.70). This did not help. I have QuikTime on my computer, but am not sure if it needs to be in a certain file location.
I have also gone in to BIOS after installing the GPU and disabled internal graphics, but that did not help either. Not sure what to do next. Any suggestions?
Thank you,
Rhoadman

Thank you everyone for the replies. Although I don't have a laptop, the following seems to work.
Solution 1
On Windows 7, right-click the shortcut to Adobe Premiere Pro, and choose Run as Administrator.
Using this method, Premiere Pro opened successfully. Using the shortcut directly, the error persists. It looks like we will just have to open the program using this method.
Many thanks for the replies.

Premiere Pro CS6 stopped working, for one user profile

So Premiere Pro CS6 wouldn't open today. Opened fine yesterday, and the days before that. The program didn't crash yesterday or close improperly. I just get the logo splash screen, but I don't see the usual text stream of applications starting up on it. After a long time I get a Windows message saying it can't open the program.
- I used Bridge to update to the latest version. No help.
- I made sure Quicktime was updated.
- I cleared the preferences by moving the whole My Documents\Adobe\Premiere Pro\6.0 folder somewhere else (as a backup). Next time I tried starting the program it created a new \6.0 folder but that's as far as it went.
- I deleted AppData\Roaming\Adobe\Adobe Premiere Pro. Starting the program recreated the folder, made a Trace Database file but only put two entries in it:
DynamicLink 1 5
FE.WinInit.LocPlugins 1 5
And then it stops there. No other files created.
- Tried starting the program holding the Shift Key, and again with the Alt key, and again with both. No change.
- Rebooted after every change.
I tried logging out as the video user account and logging in with my personal account, and then Premier Pro opened just fine.
Problem is, I need it to work on the video user account because it was created specifically for our video editing PC. Our company logins also tie into our email and other programs. This one was created specifically so more than one person could share Premiere Pro settings and resources, and there was a battle with our IT to get it because they despise generic accounts.
I've seen other threads here mentioning startup problems but the solutions listed there don't work for me. Manually trashing the \6.0 folder didn't help. I don't have a .pref file or Preferences folder other than the \6.0 one. I haven't made any changes to the PC. The video drivers must be OK or it wouldn't start under the other user account. How do I fix this one?

This was Microsoft patch week... did you install Windows updates?
•What is your exact brand/model graphics adapter (ATI or nVidia or ???)
•What is your exact graphics adapter driver version?
•Have you gone to the vendor web site to check for a newer driver?
•For Windows, do NOT rely on Windows Update to have current driver information
•-you need to go direct to the vendor web site and check updates for yourself
•ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
•nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us

Adobe premiere pro CS6 stopped working July 10th, 2014

Adobe Premiere pro CS6 stopper working yesterday,
not only on my computer, my colleagues also have the same problem, I get a windows error and the program closes ...

This was Microsoft patch week... did you install Windows updates?
•What is your exact brand/model graphics adapter (ATI or nVidia or ???)
•What is your exact graphics adapter driver version?
•Have you gone to the vendor web site to check for a newer driver?
•For Windows, do NOT rely on Windows Update to have current driver information
•-you need to go direct to the vendor web site and check updates for yourself
•ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
•nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us

Adobe Premiere Pro CS6 stopped working

I wonder how Adobe Premiere Pro CS6 solve stopped working

Provide the crash info and more details about your project.
Working with your Operating System’s Tools | Mylenium's Error Code Database
Mylenium

Just downloaded 10.7.2 on to my macbook pro and now my safari will not load pages.

I just upgraded from Snow Leopard to Lion...10.7.2 and not my safari will not load web pages...my interent is working fine...the safari acts like it is trying but generally cant load them. every once in a while it will be able to load a page. My other web browser is having no problem so this is specific to Safari. any advise would be greatly appreciated. thanks

You supply little pertinent about the MBP and the iPhone.
First... on the MBP... Click on the Apple icon.. Top left in Finder...
 > About this Mac > Version...what does it say?
Which iPhone and what is its' iOS Version.

Premiere Pro CS6 saying need 3rd party components when opening CS5.5 project

I am trying to open my current Premiere Pro CS 5.5 project within Premiere Pro CS6, but am getting the following error message:
The preset used by one or more sequences requires third party components that could not be located.
This was a project that was imported from Final Cut Pro 7 originally, but the only 3rd party stuff used in it are Magic Bullet Suite plug ins and I have already installed them all.
I can't even see if this project has CUDA acceleration anymore, as it is set to Custom Sequence and greyed out.
Any ideas what I can do?

Let it create the custom sequence and see how things are. This might not be a problem.

Premiere Pro CS3 (Version 3.0) will not start following upgrade to Windows 8-- rest of CS3 is fine

Recently upgraded from Windows 7 Ultimate to Windows 8 Pro;
next time I tried to open Premiere Pro 3.0 (Adobe Master Collection CS3), splash screen scrolled normally through files being loaded until "SolidComposite.AEX", where it white-screened & crashed.
Tried removing that file, it crashed on the next ".AEX" file; removed all ".AEX" files, it began crashing on ".dll" files;
kept removing THEM, just for the heck of it, until the software loader couldn't even start.
I popped in the CS3 disc to repair the installation-- on the entire suite, for good measure;
re-booted & started Premiere-- crashed at the exact same point.
Uninstalled and then re-installed Premiere-- the entire suite in fact, since there are so many common processes;
couple of hours later, re-booted & started Premiere-- same exact thing at the same exact point.
I found this same problem in at least a half-dozen threads, going back to '07--
and several of them even mentioned the same exact file as the trigger for the crash!
Unfortunately, not one of those threads has ever ended with an accurate diagnosis of the problem,
nor a solution more insightful than reinstalling both the CS & the OS.
I don't want to abandon Windows 8...
but on the other hand, I just can't afford to pony up another grand to upgrade the CS Suite again, either...
Besides: CS3 is everything I need, and it has worked wo well for so long--
even now, Premiere Pro is the only software in the suite with a problem!!
(I used Photoshop to create the above screencap)
So I'm hoping against hope that one of you techno-gurus may have come across this ITRW--
and actually SOLVED IT!!

Thanks for your prompt reply, John-- and for NOT simply advising me to spend my kid's tuition on more of your company's products...
Actually, I had tried the "Run as Administrator" option already, having found it in one of those other threads;
there was no change in the sequence described above.
I decided to try another possible solution which I read about in one of those other threads: opening Premiere from a different account.
Incredibly, it WORKED-- sort of...
I got a couple of popups advising me that missing codecs had to be installed-- and upon completion, Premiere opened!
Here's an interesting note: the last file to load was still "SolidComposite.AEX"-- and the "White Screen" I kept seeing was Premiere opening normally. The next thing that displayed was the normal dialog box "Open/New Project"-- I entered a new project name, and Premiere started normally. I even added a few video files as a test... all opened normally.
I returned to the Admin account to see if the fix was in here, too;
but clearly the war wasn't over, over here...
It now appears that some personal setting in the Admin account is causing Premiere to close itself;
I've been reading about the layered security measures embedded into Windows 8-- I'm suspecting the conflict lies there...
I ran the Windows Troubleshooter & got this:
both MS & Adobe confirm that CS3 is fully compatible--here's my sytem info:
Since I seem to have established a fall-back position that lets me use Premiere, my crisis becomes a mere conundrum;
but I know this is gonna gnaw at me anyway, & I'm hoping that this new information might suggest further troubleshooting options to someone who understands the Adobe software and/or the Windows software better than I do!
Speaking as someone who has found many solutions on forums like this over the years, I assure you:
for every person whose post you reply to, there are many more whom you will never know you have helped!!!

Acrobat 9 Pro for Windows Vista Ultimate will not load/update

Costing me hours of my billable time, ADOBE strikes again. i have uninstalled, updated(9.4.2 - which says Acrobat is not on my computer, though it is), i cannot get Acrobat to work. it gives me the error that i need to open Photoshop because it is part of a suite. photoshop, illustrator all have been opened but A9 will still not load.
any thoughts.

The subscription I bought allows me to go online and use Acrobat XI Pro without having it installed on my machine. It works okay, but I'd rather have the software installed on my desktop.
I guess I didn't read the product information closely enough. I can use the online service no problem with my Vista machine, but I can't download the software onto it so that I can use the program on my desktop.
I did successfully download the software to a Windows 7 notebook on the same network. It downloaded without a hitch and it works fine.
The subscription allows me two downloads - one to a desktop and one to a portable machine. I suppose I'll have to upgrade my desktop to Windows 7 or 8.
Thanks for your help.

Premiere Pro CS6 stops during export (Adobe Media Encoder also)

Hello,
I have been using the Adobe CS6 Video Bundle for a few years now and suddenly I've been having an issue with exporting my timelines in an H.264 format.
Any H.264 video that I try to export that exceeds approximately 900MB stops in the middle of the export and gives me this message:
My video bundle has been doing some odd things lately and this is possibly the most annoying. My computer is a custom built workstation so it's not like my computer can't handle it.
-Intel i7 4.2ghz overclocked CPU
-32GB RAM
-Adobe Video Bundle installed in 120GB SSD
Any help or advice would be greatly appreciated.
Thanks,
Nate

Thank you for your response.
-I tried exporting an AVI and the file exported succesfully but with a warning "Adobe Media Encoder Could not write XMP data in output file." The file plays fine though and is over 5.5GB. So that's odd that my h.264 which is under 1GB won't fully export.
-Yes, the same thing happens when exporting directly from PrPro instead of using AME.
-In this project I am using NO Dynamic Links.
-I have not installed any codec libraries.
-I do not use 3rd party plug-ins.
-My destination drive has several terabytes.
Thanks,
Nate

Photoshop CS6 stops responding. Will not allow saving of a document.

System is Windows xp pro 32 bit with 3GB ram. Cannot save or even close out photoshop. Need to end task and start over again. Sometimes documant will be recovered sometimes not.

I scoured through the event viewer and have seen nothing in terms of error messages or warnings. System overall is quite stable which is why I have been slow to upgrade OS's. With regard to programs, processes and services, I have reexamined this list to ensure nothing was shut off inadvertently. Over the years I have tuned this OS to run quite efficiently eliminating unneeded resource hogs. Thank you so much for providing ideas and suggestions.
What I find quite odd is that when the program becomes unresponsive or maybe unstable is more accurate, some filters still function while others do not. Usually it's the larger filters like liquify and others that refuse to show up when called. It’s also that time when the program refuses to save, save as etc. but I can still do small tasks within the program like paint, add layer etc. There seems to be adequate resources available yet if I either try to save through the menu or through key stroke nothing happens. You can’t even close a document by X’ing out. It just ignores the request.
Thankfully, I can work around the issue by saving frequently and closing and restarting. But this is quite annoying.
Thank you to all for offering tips and suggestions.

Premiere Pro CS6 stopping at splash screen

Hi guys,
I'm having an issue, Premiere was working fine before, but now I open it, the splash screen starts and runs through a loading precedure, but then just stops half way through and does nothing...
This is where it stops ^
I am operating on a Mac 10.9.2 OS X Mavericks
My other programs work fine.
I have tried deleting my user preferences folder but it didn't change anything.

Hi hero2k,
Welcome to the forums.
Please go to the below location and remove all the plugins inside the folder Mediacore.
Startup drive>Library>Application support>Adobe>Common>Plug-ins>7.0>Mediacore
Please update if you have any firther issues or queries.
Regards,
Vinay

PE 4 stopped running -App will not load

I am running windows XP and have been using PE4 for a long time. Today when I tried to start it up, it just sucks up computer resources and never loads. All other applications on computer are working. My catalog and pics are on a network attached storage device. I am wondering if I should uninstall the app and then reinstall. If I did this and then reattach to my catalog would this work, or do I risk losing my catalog and or pics.
Thanks
Gary

Uninstall and reinstall doesnot effect the catalog.
Nothing will happen with your pics too..
~V

Premiere Pro CS6 stopped loading correctly - will not load new or existing projects?

Similar Messages

Maybe you are looking for