Premiere Pro CS6 switching sequence settings from previously edited video clips

When importing my video clips into Premiere Pro, which are currently set at 1920 x 1080 both from the video clip and sequence settings, it switches to 720 x 480 (says file has mismatch - keep or change settings, I've done both results the same) when I export and when I put clip on timeline it switches it to 1440 x 1020. The video clips were done on a earlier version of Premiere Pro at another facility, where we put the audio and video together to make a complete video clip We shot the footage using a Canon DSLR at 24 ups and are MOV files, done on a Mac
If anyone else has had this problem and found a solution, plese pass on.
Carl A.

Take your imported footage and create the sequence by dropping one of the video files on to the "New Item" button.
If your footage is actually showing in the project panel as 1920X1080, the sequence that will be created will match that. Guaranteed.

Similar Messages

Premiere Pro CC, Project / sequence settings help with GoPro 1080p / 60fps

Hi all,
I have just started using Premiere Pro CC with the GoPro Hero3+ black edition, but my video's, once exported do not look very smooth and clean like HD video should?
The video settings on the GoPro are 1080p / 60fps, narrow view (protune off), I then import these .MP4 video files into PP CC and use these sequence settings:
29.97fps
1920 x 1080 / 16:9
Square pixels (1.0)
No fields (progressive scan)
30 fps drop-frame timecode
Preview file format: I-Frame only MPEG
Maximum bit depth
So, my question is, should my sequence settings be at 60fps to match the 60fps I used to capture the video with? How should I edit 1080p / 60fps video in order to get nice clean, smooth HD video playback on youtube?
My export settings are:
H.264
1920 x 1080
29.94
Progressive
Square pixels (1.0)
NTSC
Profile: Main
Level: 5.1
Render at maximum depth
VBR, 2 pass
Target Mbps: 40
Max Mbps: 50
Keyframe distance box checked and says: 90
Use maximum render quality
Here is the video I uploaded to youtube: Deal Tri Summer Duathlon May 2014 - YouTube
What do you think?
Any help would be very much appreciated!
Kind regards,
Paul

No problem. When you click sequence > sequence settings, what does your editing mode say? I use AVCHD 1080p square pixel. You can change this to 'custom' which will give you more control over the settings if you need to, but if you use the method I described earlier then you shouldn't need to change anything. Maybe if some of your videos are 2.7k or 4k resolution mixed with 1080p videos then you could play with the settings.
Just remember that if you start a new project and have for example, four videos shot at 1080p and one at 4k, if you drag and drop the 4k video to the 'new item' bin then your sequence will match the 4k resolution settings and when you drag the other 1080p videos on the sequence time line, they will not fill the screen and would need to be 'scaled' in to fit the screen, thus making them look terrible. The best way would be to drag n drop the 1080p video(s) and then include the 4k video on the timeline and just 'scale' / 'crop' it to fit the screen.
All the best!
Paul

Adobe premiere pro CS6 title templates missing from cd installation

After installing premiere pro cs6 from cd, i want to add a title. Trying to do so with designer templates preset, i don't find any.

Note that there are TWO links and TWO downloads
There are TWO links for missing Content... PPro & Encore basic and Encore extra
http://helpx.adobe.com/x-productkb/multi/library-functional-content-missing.html
Encore additional http://helpx.adobe.com/encore/using/download-library-content.html

Premiere Pro CS6 "startup error" because of no "capable video play module."

Hi,
I need to edit some native 3D video and burn a Blu-ray of it, but cannot run a trial version of Premiere Pro CS6 on a brand new HP DV7-6b78us laptop because I get a prompt that says "Adobe Premiere Pro could not find any capable video play module. Please update your video display drivers and start again." However the video drivers for the Radeon video card are the most current according to HP (and Radeon). So is there anything I can do or is this laptop unable to run Premiere Pro CS6? Or is there a previous version of Premiere Pro that might work instead? Thanks.
Rob

Does your laptop meet Adobe's MINimum http://www.adobe.com/products/premiere/tech-specs.html requirements?
Also... the "real world" requirements are likely well beyond your laptop http://forums.adobe.com/thread/810750
More about Requirements http://forums.adobe.com/thread/618058
Disk Configurations http://forums.adobe.com/thread/878419

Premiere Pro CS5 Project & Sequence Settings

I will be shooting with a Sony NEX-VG10 set at a Record Mode of FH 17M (which I have no clue what it is)
The camera records 1920 x 1080 Full HD videos (I don't know if its 1920x1080i or p) (The user guide that came with the camara doesn't explain much of anything)
The memory card that I will use to record the clips is a 32GB SDHC
I want to know the settings that I should choose to edit the clips in Premiere Pro CS5.
1) Project Settings asks me to select between DV and HDV. Is HDV the right one?
2) Sequence Settings is getting me more confused than I am already:
     In previous projects (with a different camera) I have chosen DV NTSC as I had set the Project as DV but also because of the NTSC
     In the Sequence Settings if I go along with HDV it doesn't give me the NTSC option but it lists several 1080i and 1080p options.
     Which one should I choose?
Finally, when I am all done I will burn an HD DVD with Encore.
I am assuming that using the same edited video I could also burn an SD DVD: is that possible?
The whole project will probably turn a 45 min. video.
Thanks for your help.

videope wrote:
Maybe I didn't explain myself correctly.
When creating a new project I have to specify location, name, etc... PLUS I also have to indicate the capture format
No, you don't. You can hit cancel. If you've shot on media cards, you have no need to Capture.
Secondly, comes the Sequence Settings where there are a bunch of available presets listed such AVCHD, DV-24P, DV-NTSC, DV-PAL and so on... also HDV.... and within each one there are further options for example under HDV: 1080i 25, 1080i 30, 1080p etc....
Which one is the one I should choose?
That's already been explained in this thread. And it's also covered thoroughly in the Pr Help documentation.
If understand correctly you are suggesting that I forget this screen and just add my clips and create New Sequence from Clip. This you say will automatically attach to it the proper preset. Pardon my ignorance but I can't figure out how it will work. Will I have a new sequence for each clip?
Right. Have you even tried it yet? You can select a bunch of clips, and drag them to the New Sequence icon also. They'll all be added to a new Sequence based on the source clip's settings.
Finally, when I mentioned I will burn an HD DVD I meant: a High Definition DVD and also was considering burning a Standard Definition DVD and was asking if it would be possible.
You're using incorrect terminology. There is no HD DVD. There is DVD, and there is Blu-Ray. The different formats have different names.

Premiere Pro & Audition tifferent time settings and cant edit anything correctly.

In Premiere Pro i put video, edit it in After Effects but audio in Audition.
When all is correct then i speed up video in Premiere pro but since audio speedup is shi-bad therefore i speed up in audition BUT ITS IMPOSSIBLE TO GET CORRECT TIME LINE IN PREMIERE TO PUT IN IN AUDIOTION.
In Audiotion Effect/Time and pitch/Strech and pitcher when i put same speed as in Premiere, Audition does the opposite.
Thats one fuc-bad bug/difference. Ok. So then ill try to hover with mouse video i just speed up lenght in Premiere. Hovering gives in, out point times and total time of clips leght. Right? Maybe.. couse if i put that lenght in Audidiotion as desired legnght, clicked save and ctrl+s alt+f4 and see in Premiere.. THEN IS SOMEHOW A LOT SHORTER THEN IT WAS SUPPOSED TO BE.
In Idiotion i can change time settings and none helps.
In PremiProion i can change to audio time and that isnt corrent also.
Even just opening audio in Audition from Premiere without speed up they show whatever you change a different times.

Clip with Video/Audio i put in Premiere
Divided
Video clip right click replace with After Effect composition.
and what i do in premiere doesnt matter couse lenght i ckeck in Premiere hovering over other example video (to see the lenght witch to write in desired Audition speed up couse in audition 115% speedup is speedown for any illogical reason)
So Original ivdeo/audiot i speed up to see leght hovering with mouse over
BUT in Audition it shows ( i dont care what it shows i just need to put correct value in percentage in Audition but since that also doesnt work i need to know correct leght)
SO how long video i need?
In premiere audio original leght witch is now open in audition
OR in speedup settings
LOL WUT? Different duration bug also and doesnt change ANYTHING couse differences allways were for one clip- too long for other too short when using times from premiere.
SO 115 % eh? If we dont look then all is fine and i dont care what is in premiere in end and i dont need to read that duration is now too long. I would automatically just save export and then in hollywood only see something was wrong with this premieridiotion software but not my assumtions.
Ok since i saw that 115% in premiere now turnet too long..
I check whats wrong for some time. Then i try all again slow and i see there duration.
Ok i enter duration witch we now check in premiere (where else?, the clip is shortened in premiere)
AND NOW ITS TOO SHORT
Heres time settings. NONE SHOW EXACT LENGHT OF AUDIO SAME AS IN PREMIERE
SO what are time FPS in Premiere? Whats the difference? Shouldnt they work at least on some standarts?
ps. also adding to bug of ****** Premiere audio speed up and solution bugs in Audition, here another bug- YOU CANT ENTER THIS CUSTOM FPS SPEED AS I SEE IN PREMIERE IT WANTS TO WORK WITH AUTOMATICALLY 24,81 fps
AND WHY WOULDNT THEY BE AUTOMATICALLY SYNCHRONIZED if audio is LINKED TO PREMIERE???

Premiere Pro CS6 Quits unexpectedly when loading Images or Video into viewer.

I have been using CS6 since May of 2013. I currently operate on a Mac. I have never had any issues. I used it one day last week, then all of a sudden a few days ago is when the issues started. Premiere Pro will start normally (New or Exsisting Project), I can even import media. But I am not able to load Images or Videos into the viewer, nor am I able to just drag and drop on the timeline. Audio seems to drag onto the timeline just fine.
I have tried many things to trouble shoot the issue such as:
1. Starting a new Project. (Thought maybe something in the existing project was corrupt.)
2. Opening an older project that I knew worked fine in the past. (Thinking new projects were also corrupt.)
3. Transcoding the video Files. (Thinking the media was corrupt.)
4. Restarting the computer.
5. Holding "Shift" while starting Premiere Pro.
I am not getting any error codes, just a Dialog box that says, "Sorry, a serious error has occurred that requires Adobe Premiere Pro to shut down. We will attempt to save your current project."
Thanks for your help.

Hi Luther,
Welcome to Adobe Forums.
Which version of Mac OS are you using?
Try to repair the preferences by opening the finder window click on go and
choose go to folder and type ~/library and press enter. Then go to Preferences>Adobe
and rename the 6.0 folder to 6.0.old. If you are using Mavericks ( OS 10.9) try to give permissions to the
Adobe folder as well.
Please reply in case the issue persists.
Thanks

Intermittent problem after launching Premiere Pro CS6.0.2 - audio pitch dropped and video staggering

Intermittent problem after launching Premiere Pro - all audio is lower in frequency by very noticeable amount and video keeps dropping back a few frames every few seconds, apparently trying to keep in sync with slower audio.
This does not happen consistently, perhaps every 5 or 6 launches. Otherwise program works normally after launch and sometimes a quit and relaunch will fix the problem.
Have submitted bug report but wondered if anyone else having the same problem?
Mac OSX 10.8.4 iMac 3.4 Ghz Intel Core i7 32GB

Well if i do that, the video will raise up GBs larger (and that is really bad).
Why is it really bad?
Its a fact of digital life. High datarate = quality.
example ...even the Youtube preset is in the 8mpbs area.
...and you are exporting 1 hr 35mins of media.

Adobe Premiere Pro CC is blanking the top of my video clips! Please Help!

I was just using this software for about an hour just fine. All of a sudden I drag a clip to the project media so I can put it in the sequence and this happens!
Now every video I drag in does this! I tried rendering it out and it is still there! *note* the black is not there when I watch the video in windows media player.
This project needs to be finished soon a promt response would be apreciated.
Thanks!

You may try following the steps provided in this post
http://forums.adobe.com/message/5494394#5494394
Peter Garaway
Adobe
Premiere Pro

Right sequence and export settings in Premiere Pro CS6, video with still images

I am trying to run a video on my website (self hosted). This video, made with Premiere Pro CS6, consists of still images with different video effects.
This video is only 50 seconds, but when I transform this in the ogg, webm and mp4 format, I obtain file with large size and the quality is not good.
Could you please guide me to find out the right sequence and export settings in Premiere Pro CS6 to obtain a video for the best possible quality on the web?
A precise description of the settings would be awesome.
Thank you
Silvia

Make the export setting the resolution you want to use on the web.
Make the sequence settings accordantly to these export settings

FAQ: What are the best resources for Premiere Pro CS6?

Here are high quality resources for troubleshooting and tutorials related to Premiere Pro CS6.
Premiere Pro CS6 troubleshooting articles
Issue: I'm having trouble downloading and installing Premiere Pro CS6. What do I do?Answer: See troubleshooting documents, post in the appropriate forum, or contact support.
More info: http://blogs.adobe.com/aftereffects/2013/09/troubleshooting-issues-with-downloading-and-in stalling-after-effects.html
Issue: What are the system requirements for Premiere Pro CS6?See this article: http://helpx.adobe.com/premiere-pro/system-requirements.html#Adobe%20Premiere%20Pro%20CS6% 20system%20requirements
Issue: Why won't Premiere Pro CS6 play back AVCHD media?Answer: Update to Premiere Pro CS6 (6.0.5). Previous versions of CS6 had this issue.
More info: http://blogs.adobe.com/premierepro/2013/08/premiere-pro-cs6-6-0-4-update.html
Issue: Does Premiere Pro CS6 work with OS X 10.9 (Mavericks)?Answer: Yes, make sure you update to Premiere Pro CS6 (6.0.5)
More info: http://blogs.adobe.com/premierepro/2013/10/premiere-pro-and-mac-os-x-10-9-mavericks.html
Issue: Is there a trial available for Premiere Pro CS6?Answer: Yes, subscribe to the free version of Creative Cloud, then download the trial.
Issue: I'm having unexpected behavior in Premiere Pro CS6 and want to trash preferences. How do I do that?Answer: See this blog post: http://blogs.adobe.com/genesisproject/2011/02/premiere-pro-cs5-maintenance-two-great-tips. html#more-537
Issue: I'm getting errors related to QuickTime. What do I do?Answer: See this blog post for troubleshooting items related to QuickTime: http://blogs.adobe.com/aftereffects/2011/02/troubleshooting-quicktime-errors-with-after-ef fects.html
Premiere Pro CS6 tutorials
Issue: I'm new to Premiere Pro CS6. How do I get started?Answer: See this blog post: http://blogs.adobe.com/kevinmonahan/2011/05/20/getting-started-with-adobe-premiere-pro-cs4 -cs5-cs5-5/
Issue: I'm switching to Premiere Pro CS6 from Final Cut Pro 7. Are there any tips for me?Answer: See this article by Scott Simmons on Pro Video Coalition: http://provideocoalition.com/ssimmons/story/105_adobe_premiere_pro_cs6_questions_answered
Issue: I just switched to Premiere Pro CS6 from Final Cut Pro 7. Are there any missing features between the applications?Answer: See this article: http://provideocoalition.com/ssimmons/story/10_fcp_things_fcp_editors_might_be_missing_in_ adobe_premiere_pro_cs6
Issue: Are there any good, free Premiere Pro CS6 tutorials available?Answer: See these tutorials: http://library.creativecow.net/series/Premiere-Pro-Basics-CS6--above-with-Andrew-Devis
Issue: How do I optimize Premiere Pro CS6 for best performance?Answer: See this article: https://www.video2brain.com/en/courses/after-effects-premiere-pro-performance-workshop
Issue: How do I operate the multicam function in Premiere Pro CS6?See this article: http://provideocoalition.com/ssimmons/story/working_with_multicam_in_adobe_premiere_pro_cs 6

Hi ..
GO to website www.Apache.org
down load Apache tomcat server .
install it ...
Go to sun site
c and download jsp tutorials ...
Go to
(www.coreservlets.com)download book core servlets
u can find lots of nice books supported by sun on sunwebsite ...
Now u r equipped ....
start doing everything (R &D) on server ..
Join This JSP forum and ask any thing u didnt got ..or learn or get confused..
I thing once u go through this ..it will do all what u want
Hope it helps
Best of Luck :)
regds & take care

How does Sony Vegas Pro 12 compare to Premiere Pro CS6?

About 2 months ago, I purchased Premiere Pro CS6 retail box version from Best Buy. With everything going to the CC, I can't get upgrades unless I join the CC. This is NOT something I want to do! I would like to know if the chroma keying and image stabilization in Sony Vegas pro 12 are just as good or similar to Premiere Pro? I already read about how to transfer the product license on the Adobe website. If I decide to make the switch, I will list my Premiere Pro on Ebay. Another reason why I may want to get Vegas Pro is because I found out about the AVCHD bug in Premiere AFTER I purchased it. It has been over a year and Adobe has still not fixed the bug. I have a feeling they will never fix the bug because of the new CC vesion. I am currently about half way through the classroom in a book from Adobe and have not yet edited any of my own videos. My video camera is a Canon Vixia HF S20 and my computer is a new Dell XPS 8500 with Core i7 and 12 GB of ram. Just a bit frustrated on what to do. If I can't sell my Premiere Pro for a good enough price, I will keep it and switch to Vegas or some other program after it becomes obsolete.

You can download a fully functional demo of Sony Vegas 12 Pro. That's what I did. So far I like it and will be making the switch to Sony Vegas 12 Pro.
They also have Suite version which include HitFilm 2 Ulimate. This program is like After Effects. I haven't started playing with that yet.
Also, there is Movie Studio 12 Platinum Visual Effects Suite 2. That's a mouth full. Anyhow, it is based on Sony Vegas 12 and it comes with HitFilm 2 Express. The Express version is a stripped down version of HitFilm 2 Ulimate. The Express version is still a great program for adding effects. For some people Movie Studio 12 is all they will need,
Both version, Vegas and Movie Studio, have GPU acceleration which is really nice.
I also just picked up Corel PaintShop Pro X5 Ultimate. It sells for $69.95 and it can open and save .PSD files. So I don't have to worry about all of the .PSD files I saved in Photoshop
Right now I have CS5 and CS6. Premiere CS6 has a lot of bug, the AVCHD spanning clips, slow motion that jitters, caching problem, slower exports, etc.
Dave

Blackmagic & premiere pro CS6

since I have had so much trouble getting the blackmagic intensity pro to work with CS6, I thought it might be helpful to let others know what I have finally learned. Using the blackmagic drivers 9.6.8 which can be found in the archives at blackmagic and setting the output to HDMI & component and the input to component video & Analog RCA audio, I have everything working perfectly, at least, for my setup.

Thank you for responding. Yes, I exported test files from Premiere and After Effects, and compared the files to the source sequence using scopes and a difference matte. The After Effects CS6 32bpc export showed no differences to the source sequence at 0.0% matching tolerance. The Premiere Pro CS6 export was different from both the AE file and the source sequence at matching tolerances below 0.5%, but was the same as an uncompressed 8-bit AVI at 0.0% matching tolerance.

Premiere Pro CS6 exports Blackmagic 10-bit 444 codec at 8 bpc

Color depth is automatically set to 24 bits (8bpc) when using the Blackmagic 10-bit 4:4:4 codec to export a file from Premiere Pro CS6 (Win-7). Is it possible to render from Premiere Pro using a higher bit depth so that the output isn't clamped? After Effects allows higher depth, but it is not an ideal workflow to export complex Premiere projects from AE.

Thank you for responding. Yes, I exported test files from Premiere and After Effects, and compared the files to the source sequence using scopes and a difference matte. The After Effects CS6 32bpc export showed no differences to the source sequence at 0.0% matching tolerance. The Premiere Pro CS6 export was different from both the AE file and the source sequence at matching tolerances below 0.5%, but was the same as an uncompressed 8-bit AVI at 0.0% matching tolerance.

How do I get Premiere Pro CS6 off Creative Cloud?

I have spent over 100 hours in Premiere Pro CS6 putting together four hours of complicated video (at least for me, a first timer) all with the end objective of producing two DVDs which I’ll replicate for the 100+ members of my son’s high school marching band. So it came time to burn them to the DVD, make a menu, etc.
Which brought me to the apparently complicated and confusing task of trying to first FIND – and then use – Encore.
After reading many threads in multiple forums, it seemed what I needed to do was to download Premiere Pro CC, uninstall Premiere Pro CS6, leaving the box unchecked for Encore, and then use them together.
I installed Premiere Pro CC. Opened a project apparently fine.
Then realized that perhaps Encore was already available and accessible to me via CS6. So tried to open a project there…. and now none of my projects could open in CS6!!! I was getting the dreaded “Sequence not available” error message.
I tried uninstalling CC just to see if that would fix it (since installing it seemed to cause the problem). Didn’t solve it.
Then came upon an Adobe help page that seemed to imply if I uninstalled CS6, ran a cleaner utility, and then reinstalled it, it would likely fix it.
So I uninstalled it.
Then I went to Creative Cloud to download CS6... but I can’t find CS6 anywhere in Creative Cloud!!!! I got a "single-app" membershi to Creative Cloud in June of last year just for Premiere Pro. I never bought a DVD or anything so I THINK that's the only way I can re-install the program.
Forget the nightmare of trying to figure out how to get Encore - I just want Premiere Pro back at this point. What the heck is a person supposed to do?

John -
Thanks for your patience in explaining the page number stuff to a "newbie."
If I understood you correctly, was the ultimate URL you were suggesting I click on this one?
http://tv.adobe.com/watch/davtechtable/using-premiere-pro-cc-encore-cs6-for-bluray-dvd-and -interactive-video-for-ipadatv-and-mobile-hd/
If so..
a) I already watched that due to finding it in another thread where I think you were the guy that posted it (thank you!)
b) Those directions were in part why I uninstalled Premiere Pro CS6 in the first place
c) That video does not address my problem: I can't find CS6 loaded in Creative Cloud
However, your Indesign-related link DID address my problem. Thank you very much!!!

Premiere Pro CS6 switching sequence settings from previously edited video clips

Similar Messages

Maybe you are looking for