Premiere Pro CS6 will not export the full project sequence

I have a project consisting of videos, photos, and audio. The full project is just over 12 minutes long. I can export it out in chunks, but when I try to export 11 or more minutes of it, I'm able to export new projects that are longer, but have less tracks, just fine.

Hi Distilledbullet,
Thanks for choosing adobe forums
Please provide following information ;
What is the OS and version ?
What is the Graphics Card installed on the system ?
How much Ram do you have ?
Do you use any external Hard Drive ?
Thanks
Sandeep

Similar Messages

Premiere Pro CS6 will not shut down - this has occured since installing.

Hello,
I recently installed Premiere Pro CS6 and the program will not shut down normally, I have to always shut it down using the task manager. Should I try re-installing the program?

We cannot know. You are not providing any system information. Such issues are most of the time driver issues where certain DLLs are not released/ unloaded from memory.
Mylenium

Premiere Pro CS6 will not install after uninstalling it?

I was having a problem with Red Giant's Mojo plugin. Their preset would not show up in Premiere Pro CS6. The Red Giant tech told me to reinstall PPro. So I did the uninstall thing and now when I click to install PPro, nothing happens. I did things like restarts and repaired permissions, but nothing helps.Any ideas?
Mac Pro 1,1 - Lion 10.7.5

This is how I solved the problem:
Been on the chat with Red Giant. They could not fix the problem. They told me to re-install Premiere Pro. That didn't help. The presets still did not show up. The Mojo preset file would not import. So what I did was, since the Mojo presets do show up in After Effects, I applied each preset to a clip. Took a screenshot of each one of the slider of where they were set in the effects control panel. Then went back to Premiere Pro, manually set the sliders for each preset that I made screenshots of. After each one I set, I did a save preset. Made a new bin and put all nine preset in the bin. It was a little time consuming but it got the job done.
Hope this helps.

CC and Premiere Pro CS6 will not open

I have downloaded and installed the app twice.
I go into Creative Cloud and I can see Premiere Pro CS6 is an installed app but i can not click on it to run it.
At this point is have spent an hour trying to run one app.
I get no error it just does nothing.......
Just want to try it... So far it is not looking good....

What about the Program Files location? If you don't see it there, use the CC cleaner tool to uninstall the apps and then reinstall again. Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Thanks,
Rameez

Adobe Premiere Pro Cs6 Will Not Open

I have an issue.
Essentially I began installing Adobe Premiere Pro, and it installed halfway before concluding it had allegedly finished installing all the updates.
This is not true as I cannot click the application in Creative Cloud, and my arrow remains as the standard cursor.
This is the second time this has happened, as I was forced to reinstall Creative Cloud and all of my Applications.
I thought a clean install would have helped the situation but it seems to have made no difference, there is no way to open this application, it merely says that it has been installed though is completely unusable.

What is your operating system?
Yosemite sometimes has problems, often related to "default" permissions needing to be changed
-one person's solution https://forums.adobe.com/thread/1689788
-http://blogs.adobe.com/creativecloud/creative-cloud-and-yosemite/
-https://helpx.adobe.com/x-productkb/global/mac-os-yosemite-compatability.html

Premiere pro CS6 will not stop indexing and conforming

I am working on several projects with ease. But a project gives me problems. I have already imported several types of files and edit individual sequences.
Now I add more recordings but premiere does not stop indexing these files. If I want to watch any clip in the source player starts premiere program to index the selected clip and the last imported files again. How to fix this?
Regards miv

I am working on several projects with ease. But a project gives me problems. I have already imported several types of files and edit individual sequences.
Now I add more recordings but premiere does not stop indexing these files. If I want to watch any clip in the source player starts premiere program to index the selected clip and the last imported files again. How to fix this?
Regards miv

Premiere Pro cs6 will not do slow cross dissolve

OK, this is verry strange. I have a number of titles with cross disolves on them, if I change the duration it works, exept for one, whatever I do the disolve finished 2 seconds from begining, even if I make the cross disolve verry long (i.e. 30 secs). I have tried using the various filters and even opacity but nothing works.
Ben

You can open old projects without issue, just can't create new ones?

Premiere Pro CS6 does not recognize USB PnP Sound device connected to iMac OSX even when activated in Audio MIDI setup. The iMac(i-7 processor,16 GB) is working with this USB device without any problem

Premiere Pro CS6 does not recognize the USB PnP Sound device in order to produce a commentary sound track. The USB device has been activated on the iMac OSX by using the Audio-MIDI-setup and is working correctly with the iMac. When opening > presets >audio hardware I can only select between >standard >out integrated > digital input integrated >microphone integrated. USB PnP is not indicated at this place.
With the built-in microphone of the iMac I can produce the commentary sound track, but I would prefer a stand alone version for better quality.
Your help is highly appreciated. Thanks in advance, Annemarie!

I'm using a Logitech Webcam Pro 9000 (which has a microphone on the side). I have several other devices plugged into separate USB slots: a keyboard, a mouse, my iPhone, and a Roland keyboard midi controller.
I've considered that maybe the webcam/mic combo is the culprit. If USB doesn't work at a constant speed, that could very well be causing the issue! The sound begins to lag badly sometimes when it's working properly, so that there's a multisecond delay between speaking and hearing my voice repeated back over the mic which is another sign that something is wrong. I've also caught it making a strange electronic sound during its "hang" time once it stops taking sound input correctly.
Maybe I should try to use line-in and forgo USB altogether then. I think I'd need a preamp and some sort of converter for that since the Mac Mini lacks a powered mic jack. I'm only a newbie musician so I've never set up such a system but it might be a better solution in the long run.
I'll check to see if it hangs before or after my computer enters suspend mode, that's a good suggestion too. Thank you for your help!

Premiere Pro CS6 - video noise in the exported file

Hi everyone,
Im trying to make the transition from FCP7 to Premiere Pro CS6. I edited my first project with Premiere Pro and exported the sequence. However I noticed that the exported file had more video noise than the original clips.
The material is shot by Canon 5D Mark III and edited natively in the Premiere's timeline. Then they are exported to ProRes 422. After noticing the noise I exported the sequence as "match the sequence settings" and it created the .mpeg file. Same thing, there was noise. I then tried another other formats of that same clip and transcoded the Mark III footage to Xdcam EX 1080p before sending to premiere. Same thing, no matter what I did.
The only way i got the exported file to look the same as original file, was to convert the files before sending to ProRes 422, then edit those files in Premiere in the sequence thats settings are XDCAM EX 1080p and then to export it to ProRes422.
Do you have any thoughts for this. The noise I'm talking about is not a huge amount of noise but definitely noticeable if you look the FULL-HD material.
I really hope there is some setting I missed. Im using Mac pro 2009 and Macbook pro 2011.
Thanks
Thomas
mac

Hi Thomas
Try exporting by enabling "Render at maximum depth" and " Use maximum render quality" in the export dialogue window.

Dvd burned in premiere pro cc does not fill the screen. Desire a 4:3 aspect ratio

I am using premiere pro cc. I burned a dvd several times,trying different presets. On each occasion the dvd never fills the screen. It does not lool like letterbox ( 16 x 9 ). There is space all around the picture / video. Need assistance fast,project is already late.Thanks in advance.
Theo Smith

I sent the screenshot via an e-mail attachment. I wasn't aware that
attachments could not be forwarded this way. I will send it again. First time
I've utilized this service.
In a message dated 3/8/2015 10:15:23 A.M. Eastern Daylight Time,
[email protected] writes:
Dvd burned in premiere pro cc does not fill the screen. Desire a 4:3
aspect ratio
created by Peru Bob (https://forums.adobe.com/people/Peru+Bob) in Adobe
Media Encoder (AME) - View the full discussion
(https://forums.adobe.com/message/7264779#7264779)

Adobe Premiere Pro CS6 will work under windows vista?

Adobe Premiere Pro CS6 will work under windows vista?

Hi,
Thanks for posting on forum. Windows Vista is not a supported platform for Adobe Premiere pro CS6 but, you can try the installation on Vista and check if it gets installed on it. Also, if it gets installed you might face further issues while using the product.
Thanks,
Vinay

Premiere Pro CC will not import .mov files

Having issues with Premiere Pro CC, I cannot import .MOV files created with my Canon 6D.
If I try to import the files, I get a very generic "File format not supported" error msg.
This is a new install of Premiere CC on a new computer. I was able to import them using Premiere Pro CC on the old computer.
Quicktime will play these files fine on my new computer.
Premiere Pro CS6 will import these files on the new computer.
Premiere Pro CC would open them fine on my old computer.
I'm not even sure where to start. Any help would be appreciated.
Here are my system details:
OSX 10.9.3
new Mac Pro
3Ghz 8-Core Xeon E5
64 GB RAM
Files are on external G-Tech Thunderbolt drive.

That was I was thinking at first, but if Premiere CS6 (installed on the same computer) imports and plays them, they must be on the system, no?
I really do not want to transcode. I have an existing project that uses the videos and the project on the new system will not import them or re-link to the videos. Really trying to get away from having to re-create the project and re-edit.
Thanks!

Why won't premiere pro cc will not let me add an adjustment layer

why won't premiere pro cc will not let me add an adjustment layer

Glad that you got the adjustment layer issue worked out. Not quite enough info to troubleshoot the other problems. The following page outlines the kind of info that helps zero in on the cause of such problems: FAQ: What information should I provide when asking a question on this forum?
As to the cache files and rendered previews, you do not need to keep them. Premiere will regenerate them as needed. Because re-conforming the audio and re-rendering the sequence takes time, you probably want to keep those files around for the current project--unless, of course, you have reason to think that the cache or render files are causing problems.
To keep things clean and get the attention of more people, it would probably be best to start a new thread for the other issues.

PreludeCC and PRemiere Pro CC will not update error: " log Transport 2"

PreludeCC and PRemiere Pro CC will not update . update gets to 62% and then quits with the following error code "Log Transport 2"
System
OS 10.9
MacPro 3,1
All other apps do update.

HI Steve & Perry,
Have you tried restarting the machine and applying the updates again ? If yes, are you still getting the same error message ? If yes , could you please share a screen shot of the error that you get ?
Cheers,
Kartikay Sharma

Premiere Elements 13 issue with the mouse on When I select a clip of video and move to a different place in my time line, Premiere Elements 13, will not release the clip rom the mouse. The clip follows my mouse movements and goes to other places in my

Premiere Elements 13 issue with the mouse on MAC OSX Yosemite 10.10.1
When I select a clip of video and move to a different place in my time line, Premiere Elements 13, will not release the clip from the mouse.
The clip follows my mouse movements and goes to other places in my time line.
I try to delete these extra insertions, but the mouse will not release the clip.
Action I’ve taken: I’ve re-installed Premiere Elements 13. Problem remains.
This issue has consumed too much of my time and does not go away. It ruins my video.
Help please.
Thanks

I tried using the Guest Account on my Mac. In the Guest Account, Illustrator works perfect!
Then I started wondering what processes (tools/tweaks) I run by default on my account. Turned out the problem was called by a little background tool called RightZoom. RightZoom let's the green 'zoom' button always maximize your current window.
So thanks! Problem solved!

Premiere Pro CS6 will not export the full project sequence

Similar Messages

Maybe you are looking for