Premiere Pro CS6crashes when opening project files ...

01
02
After I work on my videos for long time, now Premiere Pro crashing when i open my projects.
It's hepen after I updated adobe softweres.
Can some one help me?

OS: Windows 8
Operating System:        Windows 8 Pro 64-bit (6.2, Build 9200) (9200.win8_gdr.121023-1503)
Language:                       English (Regional Setting: English)
System Manufacturer: ASUSTeK COMPUTER INC.
System Model:                Z9PE-D8 WS
Processor:                       Intel(R) Xeon(R) CPU E5-2620 0 @ 2.00GHz (12 CPUs), ~2.0GHz
Memory:                         32768MB RAM
Available OS Memory: 32718MB RAM
DirectX Version:             DirectX 11
Adobe Premiere pro CS6
I have Neat Video plug-in and I have used this plug in my videos projects. I uninstalled this plug after I updated adobe software and I installed again. But still I can't open my project files.

Similar Messages

Premiere pro crashes when opening project

Premiere pro project crashes when opening. I have an imac running OS 10.7.3 (8GB Ram, AMD Radeon HD 6970 2048mb) and have Premiere Pro 5.5.2. I have had 2 projects that I have worked on for hours and saved numerous times and then when I closed pp and tried to reopen the file the screen goes white and then crashes. Please help.

Ann, THANKS for replying!
If I open a brand new project, which I could do before, and then IMPORT a previous project, it works and I can edit and export the project. However, it did crash upon trying to save it and I still can not just open a previously created project. When I do I get an error message that Says: "Premiere has encountered an error and needs to close down. We will attempt to save your project."
Do you or anyone else have any ideas?

Premiere Pro creating impossibly huge project files

I am confused as to why Premiere Pro CS6 is creating projects files that are so enormous they either crash my computer while saving them, or when I try to open them again after closing them, they simply will not open because they are too big. I have NEVER seen Premiere Pro CS5 create a project file that was, for example, 1.75GB in size. Now, I can't even edit a two minute video without eventually losing everything because the file size becomes unmanageable.
I thought it might be an issue with Magic Bullet Looks 2.0, as I noticed the file would grow enormously every time I added an effect to a clip. Not sure. Anyone else having this problem, with or without Looks or other otherwise 100% compatible plug-ins?

I too am having the exact same problem, but the only effect I've been using is cross fade (both the transition effect and jut dragging the opacity down. I think it might be the drag on effect now that I'm hearing everyone else's issues. At first I had thought it might be a nesting issue (the main thing I've been using PrPro CS6 for is cutting together animatics with ref footage, so a lot of individual images laid over eachother) but that did really make sense. The odd thing I've noticed, thoug, is that it seems to be increasing by a factor of two once it really starts getting gigantic (which I can tell because I version constantly). Isn't that a bit... I don't know, odd? I mean if this is infact the case. The size where they really start to seem unwieldly is at about 250mb. I'm trying to open that file now, remove a whole bunch of the crossfades, and see if it has an effect on the file size.
I have been nearly patient enough yet to wait for the 500m files to even re open.
Tell me, for you guys, does the load project bar always stutter at the same place, like, right below the "Pr" in "Load Project"?

Premiere Pro CC not opening Project or AutoSaves!!

Hi Guys,
If anyone can help I'd be grateful as I am up against a major deadline after about 1 months work and all of a sudden Premiere Pro won't open this project!! I just starts to open and then I get this error message:
Can't get into this project or any of my auto saves of the same project? HELP!!
Only thing I can remember doing recently (although it was working fine since this) was updating my Nvidia and Cuda Drivers. I also installed NewBlue FX Plugin ColorFast. Would any of these cause the problem?
Any advice really gratefully received as I am starting to panic!
Cheers,
Alex
Camera On Films

I've just come accross this bug too. I moved some of my media (one music file a .aiff) in the finder from one folder to another on the shared storage where my media is kept). I moved it purely for tiding purposes.
When I went to reopen my PremiereProCC project it would not open. It would get passed the Open Project timebar but then just hang.
When I moved the audio file back to it's original place the project opened fine.
This is a bit wierd because it has found offline files before but for some reason moving this audio file freaked PPCC out.
I've tried moving the audio file again and reopening and it would not open, moving it back and hey presto the project opens again.
The autosaves would also not open because of this file being moved.
It's very odd because I've had to relink a whole project before in PPCC because I'd transfered the media to a new drive but when you move one small file it can't handle it.
This bug needs to be sorted as I've just jumped from editing on FCP7 for the last 10 years and can't afford for stuff like this to happen.
If anyone has any clues on how to ensure that PPCC can relink moved media that would be great.
Cheers
Doug
running 7.0.1 (105)
OS 10.8.5

Pro Crashed When Opening Project

Working in CS3. I have a completed project, only need to export the final product, but when I now open the project file I get this message -

sorry about that - 1/2 of my message didn't post...
message reads: Adobe Premiere Pro CS3 has encountered a problem and needs to close. We are sorry for the inconvenience.
There isn't an error message assigned to help me understand what the issue is - it could be a corrupted file, but maybe there is another reason.
Thoughts?

Can Premiere Pro 2.0 open projects saved in CS4?

Hello!
I'm trying to find out how or if it is possible to open a CS4 project in Premiere pro 2.0.
I did a search online and could not come up with anything definite. I know that CS4 can open 2.0 files,
but the other way around has not been clarified. Our student project received footage from FCP, and then another student worked
on it in CS4 (because of the new import feature) and now I need to open it in 2.0 because that is all we have.
Is this possible? If not, how would I get the FCP footage into premiere 2.0?
Thanks!
-Jon

I appreciate your reply, only you didn't need to spend so much time writing out your explanation in such detail!
All kidding aside, if it can't be done how I described, how can it be done?
Why can't I open a CS4 project in 2.0? Additionally, what kind of work around is there? (like an EDL list and exporting the footage as AAF or something??)
I have a hard time believing that there is no one else who needs to get FCP projects into 2.0. Especially since one of the
students can get to it in CS4. I know it was a pain before CS4, but now with CS4 it shouldn't be a problem. Is this intentionally crippled
so as to encourage upgrades to CS4?
Anyways, if someone could describe a workflow that does NOT involve buying a mac and FCP, or upgrading to CS4 (I would literally have to upgrade
my computer too, so no thanks), I would be much obliged!!
Thanks
-Jon

Premiere pro crashing upon opening projects

Whenever I try to open a project I've previously been working on I get and error and Premiere pro crashes. I've found a workaround in the form of deleting my preferences, but I have to do this everytime which doesn't seem normal.
First time using support so I'm not sure if I need to provide more
This is the crashreport
Problem signature:
Problem Event Name:          APPCRASH
Application Name:          Adobe Premiere Pro.exe
Application Version:          7.2.1.4
Application Timestamp:          52aed7f3
Fault Module Name:          aticfx64.dll
Fault Module Version:          8.17.10.1230
Fault Module Timestamp:          52540642
Exception Code:          c0000005
Exception Offset:          00000000000a1a4e
OS Version:          6.1.7601.2.1.0.256.1
Locale ID:          3081
Additional Information 1:          3f3b
Additional Information 2:          3f3bfa8c58092881edeecad35641e2c4
Additional Information 3:          7bc3
Additional Information 4:          7bc34bbf1df47809e434a387a1f71c12

Hi justinB,
Welcome to the Forums.
Please go to the location of the mentioned aticfx.dll and move it to your desktop. This file might be a result of bad installation of Graphics Drivers. Please launch the Premier Pro and check if it works.
Regards,
Vinay

Logic Pro 8 not opening project file

Logic Pro 8 is not opening a project file of mine. As Logic is loading, I am watching the "progress" window which reveals all of the audio and sample files from the project as they are loading up. There is a particular .caf file that seems to get the moving grey and white bar stuck in the "progress" window. As a result, the project won't open. Prior .caf files appeared to load with no problem, so I used Sherlock and found the .caf file on my hard drive. Somehow, it's not being noticed by Logic during load up. Is there anyway to bypass the loading of certain audio files so I can at least get the Project open? I did a lot of editing that I would REALLY hate to lose. If I can get the project file open then I could place the audio back in later. When I found the problem .caf, Apple Loop Utility opened and revealed the file as being modified on 11/3/2010. All I did was drag the file to the arrange window. It wasn't cut or split in the window; so I am unsure as to what the "modification" could be. This may be contributing to why Project file won't open. Any help on how I could get the Project to open (despite the problem .caf flile) would be greatly appreciated.
D.

Try starting Logic & your project while holding down the ctrl key.
http://support.apple.com/kb/TS2047

Premiere Pro crashes when opening the program. what to do

Premiere Pro crashes every time when opening the program. Other creative cloud programs are functioning well. What to do?

You may get more specific help in that forum http://forums.adobe.com/community/premiere
When you go there, you need to provide a LOT more information for anyone to help
-PPro Information FAQ http://forums.adobe.com/message/4200840
Also, Go to http://forums.adobe.com/community/premiere and, in the area just under Ask a Question, type in
crash on launch
You may now read previous discussions on this subject... be sure to click the See More Results at the bottom of the initial, short list if the initial list does not answer your question

Soundtrack Pro Crashes when opening Audio File Project

I am just starting to use Soundtrack Pro 2 with FCP 6. When I try to send an Audio File Project from FCP, Soundtrack Pro starts up, then closes. If I try to open the Audio File Project within Soundtrack Pro the program closes. Any Suggestions? Thanks.

In trying workarounds, I exported the clip as a movie from FCP then tried to open it in Soundtrack Pro. STP closed. I also tried opening the (sent).stap file that FCP generated, and Soundtrack Pro closed again. Also, STP does not give me the error window saying the program closed unexpectedly and do I want to report it. It just stops. Any thoughts? Thanks a lot.

Receiving General Error when opening Project file in FCP 5.04

Hi to everyone.
I would need a little help. We have 4 Macs running (two G5 and two Laptops). All running with FCP Pro 5.04.
When I create a project on my G5 and open it with my laptop everything runs fine. When I make some edits/renders and save the project and try to open it again, I receive a General Error message.
But on the other two machines the file opens. I have used FCP rescue, trashed also manually the prefs, deleted on the G5 the Render files, made a PRAM zap, used Disk Utility, cleared the Wavecache etc. but no result. The Mediafiles are stored on a LACIE 500 GB. I do work this way since years and never had this before.
Does anybody have an idea ?Thanks in advance.
Zzz
G5 2 Ghz Dual Core and G4 Laptop Mac OS X (10.4.8) 4.5 Gig Ram, LA CIE 500 G

Hi everyone,
at first thanks for the replies. I tried already the New User account. It's not working and also the Lacie is fine. The problem is more complicating, I guess.
Basically it's funny that the problem starts, when I have already worked in the project. When I set up the project (load picture and sound files all standard formats, Uncompressed picture and Aiff sound) and save the project, it opens simply, when I work in the project, edit, render etc (pluggins are on both machines identicall) and save (after deleting the render files), my machine is the only one who gives General Error.
Funny is that I used FCP since years in the same setup (Desktop-laptop) and never had this. I already trashed even the trash -:)
So I guess that this problem is a really special one, perfect for all Mac Sherlocks to solve -:)
So if anyone has an idea....
Cheers Zolee

Premiere Pro Crashing on opening project because of Dynamic Link w/AE

I can no longer open my project because of an issue with Dynamic link.
Premiere gets stuck on an "Import After Effects Project" window (actually it looks like its trying to open hundreds of those windows.)
I was having issues with Dynamic link so I disabled all my after effects clips and rendered the AE sequences out, then imported those into Premiere.
Shortly after I did this my roommate accidentally knocked my firewire out of my imac and now I can't open the project anymore.
I'm using a 3.06 Ghz i3 dual core 4gb DDR3 Imac. I realize that this is a slow machine for the work i'm doing but it was running fine until this whole firewire incident.
I really need to be able to open this project so any thoughts would be great.
Thank you,
Erick W.

Hi justinB,
Welcome to the Forums.
Please go to the location of the mentioned aticfx.dll and move it to your desktop. This file might be a result of bad installation of Graphics Drivers. Please launch the Premier Pro and check if it works.
Regards,
Vinay

Premiere Elements 4 - Cannot open project file with write access

I have most of my video files on a network share drive.
However, I am unable to create the "native" files on the share (and also cannot save to them.
I must generate the new files (.prel) on a local drive (and therefore save new renditions to this location).
Is this a problem with Premiere Elements 4.0?
Should it just be run locally or can it be used on a network share?
Thanks

I do not believe you can use Premiere Elements on a network, Wayne. Especially if network is something other than an XP network.

Premiere Pro CRASH when using .M2TS files

I import the files and put them on the timeline. Everything gets very laggy at this point even though my CPU and RAM aren't sky high. Then it crashes when I'm almost finished rendering. Happens every time with .M2TS files.

I had a similar issue. I'm using Cineform and when I go to export movie, I select 'Cineform M2T' setting. It crashed during the last few seconds of export. However, the 16 min clip seemed to be okay. I successfully exported it back to tape using HD link, which was my intended purpose.

Adobe Premiere CC crashes when opening a project file .... error 3697 . [was:Adobe Premiere CC]

Adobe Premiere CC crashes when opening a project file .... error 3697 .... have to close application with Task Manager.... media files open separately OK

Just that one project, or any project? Can you create new projects?

Premiere Pro CS6crashes when opening project files ...

Similar Messages

Maybe you are looking for