Premiere Pro editing training and membership resources

I am involved in both photography editing and video editing. On the photo side I have received a lot of benefit over the years from a NAPP membership which provides good online resources and webinars. There are also several photography-based hardware and software companies that provide a stream of webinars that you can attend to expand your knowledge and typically use Photoshop as the base program. Usually this involves an artist describing how THEY utilize the tools for a desired result which is a little different than a "how to".
Especially as new versions of products come out I always find this helpful and I like learning new tweaks!
Of course I am aware of the webinars Adobe has online including these forums. They are both a great help for both photoshop and premiere pro. And the webinars are good for basic "here's how you do it" short features or new product introductions.
But are there similar membership opportunities on the video side for editing or perhaps third party webinars in addition to what is presented here? I would be looking for intermediate to advanced material.
Thanks,
BJBBJB1

Also, there are many online tutorials
http://forums.adobe.com/thread/913334
http://forums.adobe.com/thread/845731
http://forums.adobe.com/message/3234794
A "crash course" http://forums.adobe.com/thread/761834
A Video Primer for Premiere http://forums.adobe.com/thread/498251
Premiere Tutorial http://forums.adobe.com/thread/424009
And http://forums.adobe.com/message/2738611
And http://blogs.adobe.com/premiereprotraining/2010/06/video_tutorials_didacticiels_t.html
And http://blogs.adobe.com/premiereprotraining/2010/06/how_to_search_for_premiere_pro.html
And http://bellunevideo.com/tutlist.php
Premiere Pro Wiki http://premierepro.wikia.com/wiki/Main_Page
Tutorial http://www.tutorialized.com/tutorials/Premiere/1
Tutorial http://www.dvxuser.com/V6/forumdisplay.php?f=21
Tutorial HD to SD w/CS4 http://bellunevideo.com/tutorials/CS4_HD2SD/CS4_HD2SD.html
Exporting to DVD http://help.adobe.com/en_US/premierepro/cs/using/WS3E252E59-6BE5-4668-A12E-4ED0348C3FDBa.h tml
And http://help.adobe.com/en_US/premierepro/cs/using/WSCDE15B03-1236-483f-BBD4-263E77B445B9.ht ml
Color correction http://forums.adobe.com/thread/892861
After Effects Tutorials http://www.videocopilot.net/
Surround Sound http://forums.adobe.com/thread/517372
Photo Scaling for Video http://forums.adobe.com/thread/450798
-Too Large May = Crash http://forums.adobe.com/thread/879967
-And another crash report http://forums.adobe.com/thread/973935
CS6 http://www.dvxuser.com/V6/showthread.php?282290-New-Tutorial-Working-Faster-in-Premiere-Pr o-CS6
Encore http://tv.adobe.com/show/learn-encore-cs4/
Authoring http://www.videocopilot.net/tutorials/dvd_authoring/
Encore Tutorial http://www.precomposed.com/blog/2009/05/encore-tutorial/
And more Encore http://library.creativecow.net/articles/devis_andrew/
Regions and NTSC vs PAL http://forums.adobe.com/thread/951042

Similar Messages

Will the new premiere pro edit and save changes to avchd losslessly?

Hi,
I want to buy a new premiere elements to replace my old one (vrsn 3), can I upgrade it still or is it too old? Or should I still stick to Premiere elements?
Also, will the new premiere pro edit and save changes to avchd files from Panasonic and Canon without losing any quality?
I came across 'provides native support for avchd'; what does it mean? Does it mean that I can edit and save avchd files with out losing quality?
Thanks,
H

For your several questions...
One... download and try the 30-day free trials
Two... read in the user guides
CS5 User Guides - online and PDF (see link in upper right corner at individual pages)
http://blogs.adobe.com/premiereprotraining/2010/08/help-documents-for-creative-suite-5-pdf -and-html.html
http://help.adobe.com/en_US/PremiereElements/8.0/Win/Using/index.html
P-Elements 9 http://help.adobe.com/en_US/premiereelements/using/index.html

How to work with Premiere Pro cs5.5 and After Effects cs5 together?

I have edited my movie in premiere pro cs5.5 and made the rough cut. In premiere, i have edited the video, put in soundtrack and foley. Now, i need to add muzzle flashes & blood splatters in some scenes and final color correction using After Effects cs5.
When i import the premiere project in AE and make the changes, and then i export it back as premiere project. When i open this prmiere project, it shows vaious kind of errors and no changes are retained that i did in AE. Also, when i import the premiere project (which has 4 different sequences) in AE, all the media that has been imported in the premiere project also opens in AE making it difficult to organize the media.
How should i work now so that i add vfx and color correction using AE cs5?
I thought of exporting the video from Premiere pro and then open the video in AE and add vfx to some scenes and color correction to the full video and render it out again. But, this is the first time i am using AE and i am not sure if this is the best way. PLEASE HELP.
Or, i could import the whole project in AE, add vfx, do color correction AND then export to video from AE. But i think, it will be better if i export the video from Premiere as it has loads of options to choose from while exporting to a movie.
The dynamic link does not work between Premiere Pro Cs5.5 and After Effects cs5. Even if it does, its not working on my pc.
All the footage is in HD and i want the final result in best quality HD too. PLEASE Help!

If you are working between After Effects and Premiere Pro but with versions that are not the same number, you need to just work with movies rendered and exported as intermediate, lossless files.
Dynamic Link only works between After Effects and Premiere Pro of the same version number, and only when they are installed as part of the same suite.

Why is Dynamic Link between Premiere Pro CC 2014 and After Effects CC 2014 not syncing audio changes?

When I try to use a Dyamic Link between something I've cut in Premiere and a composition in After Effects, if it is simply an audio level change it will not update in AE. Only if I alter the Video track does it then take the changes reflected. Any suggestions as to what is causing this?
Running Adobe Premiere Pro CC 2014 and After Effects CC 2014.

As Dave alludes, AfterEffects is all about the visual changes ... or at least, mostly. For changes to the audio outside of PrPro's internal controls, highly suggested you use Audition instead. It is all about the sound ... and yes, will update PrPro when used correctly.
Neil

Premiere Pro 2.0 and Windows 7 - Direct Sound Input soundcard driver problem

My XP machine crashed, I reinstalled Premiere Pro 2.0 with Windows 7, and I got the following error: 'The Currently installed soundcard driver does not support Direct Sound Input. Recording audio is not possible.' The soundcard drivers are updated. Any ideas? Here's what I have: AMD Phenom II X4 965 Processor 3.40 GHz 8 GB, 64 bit. Thank you for looking.

Thanks! Though I upgraded to solve the problem, this is good to know.
Bob
Date: Wed, 9 Nov 2011 04:45:42 -0700
From: [email protected]
To: [email protected]
Subject: Premiere Pro 2.0 and Windows 7 - Direct Sound Input soundcard driver problem
Re: Premiere Pro 2.0 and Windows 7 - Direct Sound Input soundcard driver problem created by Steve-Italy in Premiere Pro CS4 & Earlier - View the full discussion
VERY VERY VERY EASY (now, when I solved the problem, not before...!!!)
Insert Micropone or any jack in Micropone Input or Aux Input, on your sound card or motherboard !
AND NOW YOU CAN USE PREMIERE PRO 2.0
Enjoy
Steve - Italy
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4015730#4015730
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4015730#4015730. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Pro CS4 & Earlier by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Premiere Pro 2.0 and Windows 7

Is Adobe Premiere Pro 2.0 (and other software included in ProductionStudio PRM 1.0) supported by Windows 7?

Harm,
Is it really that easy? So, there is no need to download Windows XP Mode and Windows Virtual PC (http://www.microsoft.com/windows/virtual-pc/default.aspx)?
Of course I would prefer to upgrade to at least Adobe CS4 Production Premium, but the best price I could find was $400 on studica.com. Or I could upgrade my Adobe Production Studio Premium to CS5 Production Premium for $800. But, these are not options for me right at this moment.
Thanks so much,
Angela

Premiere Pro CC Source and Program Playback Controls not working.. help please.

Hi,
Need your help to find out why none of the Premiere Pro CC Source and Program Playback Controls are working.. I can do playback using spacebar, but not clicking on the controls... same goes the rest.
Thank you,
Mauro

Dear Mark,
Thank you for the hint/link, reseting the toolbar did the trick.
Regards,
Mauro

Why are Adobe Premiere Pro CS6 source and program monitors playing each others footage?

Why are Adobe Premiere Pro CS6 source and program monitors playing each others footage? I import my footage into the project like normal. I drag it to the source monitor on the left hand side to set in and out points then I drag it to the time line. The footage drops into the time line with no problem but when I go to play the footage in the time line it plays back on the source monitor and not on the program monitor like it is suppose to. Other times ill drag the clip to the time line and trim it there and it will be fine and show up on the program monitor. Then ill go try to set a clip to have in and out points (which is suppose to show up in the source monitor) but it shows up in the program monitor. The clip is not even in the time line it should not be on that monitor! I have updated the program to the late update. I have re installed the program numerous times and I have even ran the Adobe Clean up program. Couldn't find much on this problem. Please help thank you! I have a PC. My computer is also way over the recommended minimum specifications to have the program installed on.

Definitive Answer (I believe): It's all about this setting, "Write XMP ID To Files On Import" - which confirms that Adobe Premiere Pro is deliberately modifying the .mov file: http://helpx.adobe.com/premiere-pro/using/preferences.html#WSE3BD4A43-7022-4fe6-97F5-95313 935347B
These posts give some background as to why having this setting enabled would be beneficial: one benefit being to be able to skip conforming files by matching the conformed file with the original using the embedded XMP tag :-
http://helpx.adobe.com/premiere-pro/using/preferences.html#WSE3BD4A43-7022-4fe6-97F5-95313 935347B
http://www.dvinfo.net/forum/adobe-creative-suite/498627-why-premiere-modifying-video-files .html
https://forums.creativecow.net/thread/205/876064
(Found using Google search term "adobe premiere pro date modified")

Hi i was told to come to the support with the error number 16.... for some reason my premiere pro stopped working and i am still paying for i but i had to reinstall it, which i dont know how to do though

hi i was told to come to the support with the error number 16. for some reason my premiere pro stopped working and i am still paying for i but i had to reinstall it, which i dont know how to do though

Hi Omid,
Please refer to the help document below to fix the error 16:
Configuration error 16 | CC, CS
If the issue persists, please contact the support:
Contact Customer Care
Regards,
Sheena

Premiere Pro CC 2014 and AME using only 25% of CPU

Hello all,
I've been having this problem with Premiere PRO CC 2014 and that when exporting it uses only 25% of my CPU thus taking 4 times longer than CS6 to export the same file project. I read a couple of forums with people having the same problems, I tired disabling CPU parking, disabling "Import sequences natively" in AME but no result.
Quick PC specs:
i5 4670
16GB of RAM
GeForce GTX 760 4GB DDR5
Everything for Adobe including the video files in use are of Samsung's SSD drives. Using CUDA as the render engine.
Currently one hour and 4 minutes clip in 4k takes about 52 hours to encode in Premiere CC 2014 and 9hr to encode the same project in CS6. Any ideas?

Take a look at your GPU usage with something like GPU-Z to see if both Premiere versions are using the same amount of MPE GPU hardware acceleration. Actually with CC 2014 it might work faster because Adobe added in more 4k effects/features for GPU acceleration.
You might want to download our Premiere Pro BenchMark (PPBM) and run it on both versions. The H.264 very complex timeline has 4K material in it and usually shows Premiere Pro 8.xxx take about only half the time that Premiere Pro CS6 take to export that same timeline.

I just updated to Premiere Pro CC 2014 and it can't start up

I just updated to Premiere Pro CC 2014, and now I am seeing an error message saying it cannot find any capable play modules. I updated the driver for my graphics card (Firepro), and tried running as administrator with no change. I am running amd fire pro control center which doesn't have the speed settings that is suggested for this problem. For some reason, the original Premiere Pro CC can still open (luckily). I looked up this problem on the on the support page, and it is listed, but when I click the link it redirects me to the start of the troubleshooting questions. I hope there is an answer to let me use the latest version of Premiere!
[moving to Premiere Pro... JTS]

Same here! Screen shot attached. I'm running the latest MBP with max specs. Anybody there @ Adobe.......?
***UPDATE*** - it's pretty easy to fix yourself. Just follow these helpful instruction on Creative Cow: Re: CC 2014 startup issues : Adobe Premiere Pro

Premiere Pro CC 2014 and Radeon R9 295x2 issues

Just added the R9 295x2 to my system and have experienced a few issues. I installed the Catalyst 14.12 with the newest drivers and when OpenCL acceleration was enabled there was no video display at all in the source or program monitors. Is Premiere not yet supporting these newest drivers? I instead tried installing the previous driver, 14.9 and the issue was resolved. However I now have the issue of tearing during playback. I have an NEC 4K monitor and when I enable playback to this monitor it displays tearing on playback of both 1080 and 4K files. Hoping to get this issue fixed and perhaps the newest drivers can be supported and resolve all issues?
Windows 7
4930K CPU
Radeon R9 295x2
512GB SSD
32GB RAM
27 inch Asus 1080p for GUI
24 inch NEC 4K for playback
Thanks.

Take a look at your GPU usage with something like GPU-Z to see if both Premiere versions are using the same amount of MPE GPU hardware acceleration. Actually with CC 2014 it might work faster because Adobe added in more 4k effects/features for GPU acceleration.
You might want to download our Premiere Pro BenchMark (PPBM) and run it on both versions. The H.264 very complex timeline has 4K material in it and usually shows Premiere Pro 8.xxx take about only half the time that Premiere Pro CS6 take to export that same timeline.

Premiere Pro CC (2014) and Grayscale Still Images?

Dropping black & white still images in the timeline. Is it better to leave them as Grayscale, or should I convert them to RGB?

Take a look at your GPU usage with something like GPU-Z to see if both Premiere versions are using the same amount of MPE GPU hardware acceleration. Actually with CC 2014 it might work faster because Adobe added in more 4k effects/features for GPU acceleration.
You might want to download our Premiere Pro BenchMark (PPBM) and run it on both versions. The H.264 very complex timeline has 4K material in it and usually shows Premiere Pro 8.xxx take about only half the time that Premiere Pro CS6 take to export that same timeline.

Premiere Pro update problem and AME bug

After renaming the folders and emptying the Media Cache database in the Preferences I thought everything was working, that is until I exported my project to the updated Adobe media encoder. There was no audio playing back from the rendered file and my clips from the Canon 5d were missing which are not acvhd. This is a multi-cam project and the audio that was used was from the acvhd clips. Pretty weird..... So I tried exporting the project from within Premiere to bypass the AME and it worked perfect.

In AME, please go to Preferences>General and disable the Import Sequences Natively option. Then export the sequence from Premiere Pro to AME and see if the problem persists.
If this change resolves the issue, then we'll be interested in getting a copy of the project, if possible, to test with.

Premiere Pro audio problem and crash

Yesterday I got an error multiple times which then led to PP crashing.
I imported an audio track, placed it in my time line, and when i went to adjust gain is when it would freeze/error/crash.
The error i got was:
[/Volumes/BuildDisk/builds/MightySilt/shared/adobe/MediaCore/ASL/Foundation/Make/Mac/../.. /Src/Mac/MacFile.cpp-1104]

In AME, please go to Preferences>General and disable the Import Sequences Natively option. Then export the sequence from Premiere Pro to AME and see if the problem persists.
If this change resolves the issue, then we'll be interested in getting a copy of the project, if possible, to test with.

Premiere Pro editing training and membership resources

Similar Messages

Maybe you are looking for