Premiere Pro EDL not loading correct frame rate in SpeedGrade

Having trouble getting an EDL generated from PPro to open properly in SpeedGrade. The EDL export comes into SpeedGrade as a 24fps sequence even though the PPro sequence is 25fps. Then when I try to link the media in Sg the I get a mismatched frame rate error. Most annoying and I can't figure out where it's going wrong. Don't want too use Dynamic link because I can't have grading layers in Sg using that workflow (as far as I can see, though I'd be happy to be proved wrong). Any ideas anyone? Cheers. Pete.

I have just created a new project in Speedgrade, then edited the options to the matching frame rate
then I close out Speedgrade, use the Premiere Pro dynamic link and then the new Speedgrade frame rate has remained and now matches
I have heard if you add an adjustment layer in Premiere Pro, then link to Speedgrade, you can utilize that for possibly what you require
I just create my looks in Speedgrade and apply through Lumetri in Premiere

Similar Messages

Premiere Pro CS6 stopped loading correctly - will not load new or existing projects?

It's been about a month since was last editing a project succesfully. When I try to load a new or existing projecet, I get the error message "Adobe premiere pro has stopped working. Windows is searching for a solution..." But there is no solution given, it just closes. I have tried updating my NVIDIA driver with no luck. I am running on Windows 8.1 64 bit. Anyone else have a similar problem?

Thanks for your reply, GautamBahl.
So I did have two graphics cards running, disabled the onboard one and still did not work.
I created a new admin account on my PC, and I am able to create a new project in Premiere now (am not able to while signed into my original account). Since all of my files and settings are on my original Windows account, I would like to get it working on that account. Do my findings give any indication as to how to fix the problem so that I am able to run Premiere signed in to my normal user account?
I appreciate the feedback!

Premiere Pro CS6 not loading/linking preview files - any suggestions?

MacPro 2010, 16-core, 2.66 GHz, 32GB RAM, Quadro 4000, OS X 10.7.4
When I save a Project and then reopen it, Premiere Pro CS 6.01 does not load the Preview Files from the Renders. I have checked the specified Preview Files location and the files are there.
In order to work, I must render the entire Project again - which is too time-consuming and counter-productive.
Am I doing something wrong? Any help would be greatly appreciated.

Same problem. I've done many projects in CS6 and this is the first time it's happened. FIrst half of the timeline was fine but the second half of the timeline, that was previously fully rendered, couldn't locate the preveiw files. The preview files are still in the preview folder but it doesn't see them in the timeline anymore. How do you delete those preview files since they are no longer recognized in the timeline? I know you can manually delete them in the preview folder by playing them and matching them to the video clips in the timeline.

Send to Premiere Pro. Not loading anything into Premiere.

Even after a reinstall of Prelude it just never works. I've created my Roughcut with markers. I just can't use it in Premiere.
PLEASE HELP.

Is this the same as described in this thread?
Are you on Mac or Win? Do you get an error of any kind? Are you able to Export a Premiere Pro project via File > Export?

Premiere cc 2014 crash with message "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again."

I updated to Premiere Pro CC 2014, all the other Adobe CC 2014 software works great, but Premiere doesnt even load. The starting page (frame) comes up - my whole computer slows down and after a minute or two it crashes completely and comes up with the message : "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again."
I'm running a macbook Pro 15" (2014) with 16GB RAM and 760GB SSD.
PLEASE HELP!

Hi Delarey,
Please go to the following location and rename the folder to old_folder name
User/user library/Application Support and rename Adobe folder
User/user library/Preferences and rename the Adobe folder
Then go to Documents folder and Go to Adobe/Premiere pro/8.0 and rename 8.0 folder
Make sure that you are in user library if you are not sure check the link below.
Access hidden user library files | Mac OS 10.7 and later
Regards,
Vinay

Im having problems importing prores files at correct frame rate

im having problems importing prores files at correct frame rate. they have been converted to prores at 25fps but on importing they appear in fcp as 30fps. any help would be appreciated.

I don't know anything about Wondershare. But it seems something may have got messed up in the conversion. Or maybe there is an identifier on the converted clip that has FCP confused and it really is 25 fps.
To begin, your sequence settings don't match your clips. You want a Pro Res sequence. Let FCP set this automatically by dragging a Pro Res to an empty sequence and when gives you a message asking whether you want the sequence to match the clips, click yes. Then hit command 0 again and see whether the frame rate is set at 30 or 25.
If it really is 30, then it will need to be converted and re-imported. It can be done in Compressor or in Cinema Tools. If you have used Cinema Tools before, great. Of not, I'll defer to others because it's been a while and I don't want to mess you up.
Good luck.
Russ

Websites not loading correctly and flash videos not playing

When I visit sites like '''ign.com''' and '''joystiq.com''', they do not display correctly and Flash videos never load. I have already uninstalled and reinstalled twice to version 9.0.1 with no change. The second time I used Revo Uninstaller Pro to help make sure I got rid of all registry entries and residual files. Does anyone know if this is a recent bug? This started for me about noon yesterday...

Not loading correctly in what way?
Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
Use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
You can also try to reset the preferences.
*http://kb.mozillazine.org/Resetting_preferences
*https://support.mozilla.org/kb/Resetting+preferences

Premiere Pro is not reading all of the video content in my AVCHD clip. I know this because my computer plays all of the content through Preview, so the information is on the card. How do I get Premiere to read all of the content?

Premiere Pro is not reading all of the video content in my AVCHD clip. I know this because my computer plays all of the content through Preview, so the information is on the card. How do I get Premiere to read all of the content?

First, AVCHD isn't just "one" clip, it splits the video & audio into several files each per clip, typically with randomly generated names. The only way they "play" correctly is if the software doing so is able to read from the data file ...in a different folder ... the information that X clip is actually A, B, D, #@, and 456 video clips and TR, #r54, and ert$%4 audio clips. The next "clip" is ... and on and on. So both rapid access to the video files AND that database file are necessary to play the files back, or do anything else with them.
VLC is a fairly decent but simple playback tool. It's nowhere near as complicated nor demanding in its "relationship" with those clips as an NLE like PrPro, which will be trying to do more reading & writing.
Further, many of the preferences in PrPro are natively set so that it writes project, cache, preview, & database files next to the footage. So ... if it doesn't have both a fast enough connection with the data AND space for putting all of it's own stuff there, it tells you it can't work the file.
Therefore ... the need to have the complete data from the card in the exact same folder structure it was in ON the card copied to a "local" hard drive.
Neil

Adobe premiere 2014 do not load

why adobe premiere 2014 do not load, I try many times and is always the same think

Hi,
Unfortunately you haven't provided much information. Please provide the following information:
OS, RAM, CPU, Graphics, Exact version of Premiere Pro ( as in the 'About' box )
Are you getting any specific error message?
Thanks,
Rameez

I don't believe firefox is the issue but for some reason pictures and certain websites will not load correctly. Why?

''Duplicate post, continue here - [https://support.mozilla.com/en-US/questions/810160]''
This just started happening a few days ago. When I go to facebook the pictures are distorted and nearly impossible to discern who is in them. I also go to many different websites that do not load correctly. Not sure if it's java, adobe, or something else but it makes browsing the internet not fun. HELP!

I have the same problem. It seems to be due to FireFox 4.0 being unable to load certain embedded content, which Firefox 3 was able to load properly.
I've been having problems loading any website that includes embedded content from worldnow.com, for example.

Adobe Acrobat 9 Pro will not load on new Windows 7 Home Ultimate PC

Adobe Acrobat 9 Pro will not load on new Windows 7 Home Ultimate PC

When I double click on the AA9 icon to initiate installation, it whirls away for a while then asks if I want to allow "this program to make changes to his computer?" I click Yes and it begins to process again for a few minutes. Then it displays the following Invalid Unicode file error message...and simply stops processing or installing. In that last process, it also reaches out for whatever reason and activates the magnifier tool in Windows.
I have thought that perhaps upgrading to a higher version of Windows might help, but who knows for sure?
P.S. – This is a brand new HP Pavilion dv6 series computer that is more than adequate to this task.
Thanks for your interest in helping!
b
Bob Horton, MS
972-786-6445
[email protected]
www.rshorton.com

Epson printers keep giving "media not loaded correctly" error message

When sending print jobs that consist of multiple copies to Epson printers from my dual 3 GHz Quad-Core Intel Xeon Mac with OS 10.5.8, the printer will frequently (more than half the time) grab a sheet of paper and spit it out with nothing on it, and then return the error message "Media out or not loaded correctly". I've had the exact same issue with their 1280, 2400 and 2880 printers. I've been struggling with and troubleshooting this issue for a couple of months now, and I believe I've narrowed it down to the operating system. It happens when printing from both Photoshop CS3 and CS4. It doesn't happen when I print from another computer running OS 10.4.11.

Dave Lesko wrote:
...the printer will frequently (more than half the time) grab a sheet of paper and spit it out with nothing on it, and then return the error message "Media out or not loaded correctly". I've had the exact same issue with their 1280, 2400 and 2880 printers...It doesn't happen when I print from another computer running OS 10.4.11.
Interesting observation of the OSs. Have you tried Epson's suggestions for the 1280 printer and 2880 printer?
BTW: This was a constant issue with my Epson 3000. It happened mostly with paper larger than tabloid size, which is the reason for having a large format printer. There was no difference between versions of the OS. This was with the paper tray, so it may not be relevant to your printers. However, when I first got the printer it came with some "cleaning sheets" to run thru the printer when changing different types of paper to clean the rollers. It seemed to help... What worked best was to pre-load the first sheet of a multiple page document.
HTH

Router's Web-based page not loaded correctly.. Need Help!!

I'm using WRT54G v2.2 router and recently i noticed tat i've flashed a wrong firmware which is WRT54GL version, so wat i did was i flash the original v2.2 firmware which i noticed it had not been updated since 2007... after i flashed the router and i log into the 192.168.1.1 webpage.. all the tabs and many options are missing as though the page was not loaded correctly or fully loaded and i cant even get into the management page and so on..
I really need help on this..

Hold the reset button down for 30seconds and then release it. Unplug the power cable for 10 seconds. try accessing the set up page once again and see if it makes a difference.

Objects Not Loaded Correctly Error

When I open up Data Modeler I get this error.
"Some objects are not loaded correctly. See the log file for details"
After I click OK my model opens up but I noticed that I can not change the precision on a column in one of my tables. This model is under Source Control and one of the other developers is missing the SubView where my table is that I am trying to modify so I think the problem is related.
Here is the contents of the log file.
2012-07-25 10:59:39,419 [main] INFO ApplicationView - Oracle SQL Developer Data Modeler 3.1.0.691
2012-07-25 10:59:55,779 [Thread-9] ERROR XMLToObjectTransformer - Can not parse file for Relational_1 in file C:\Users\jeffc\Documents\Workspace\DataModeler\Complete_System\rel\48C27E54-21776117FB40\subviews\F8908889-4FF2-CABB-7C17-047D14CCA77F.xml
oracle.xml.parser.v2.XMLParseException: Expected name instead of <.
     at oracle.xml.parser.v2.XMLError.flushErrors1(XMLError.java:323)
     at oracle.xml.parser.v2.XMLReader.scanNameChars(XMLReader.java:1186)
     at oracle.xml.parser.v2.XMLReader.scanQName(XMLReader.java:2015)
     at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1319)
     at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:376)
     at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:322)
     at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:226)
     at oracle.xml.jaxp.JXDocumentBuilder.parse(JXDocumentBuilder.java:155)
     at oracle.dbtools.crest.model.metadata.XMLToObjectTransformer.transformToObject(Unknown Source)
     at oracle.dbtools.crest.model.metadata.XMLToObjectTransformer.transformToObject(Unknown Source)
     at oracle.dbtools.crest.model.metadata.XMLToObjectTransformer.transformToObject(Unknown Source)
     at oracle.dbtools.crest.model.metadata.XMLTransformationManager.transformFromXMLToObject(Unknown Source)
     at oracle.dbtools.crest.model.metadata.XMLTransformationManager.transformFromXMLToObject(Unknown Source)
     at oracle.dbtools.crest.model.metadata.XMLTransformationManager.openDesignPart(Unknown Source)
     at oracle.dbtools.crest.model.design.Design.openDesign(Unknown Source)
     at oracle.dbtools.crest.swingui.ControllerApplication$Recent$1.run(Unknown Source)
2012-07-25 10:59:55,823 [Thread-9] ERROR XMLToObjectTransformer - Can not parse file for ALL_TABLES in file C:\Users\jeffc\Documents\Workspace\DataModeler\Complete_System\rel\48C27E54-21776117FB40\subviews\57CD6B74-1F49-265D-4FD1-D82A2BA32293.xml
oracle.xml.parser.v2.XMLParseException: Expected name instead of <.
     at oracle.xml.parser.v2.XMLError.flushErrors1(XMLError.java:323)
     at oracle.xml.parser.v2.XMLReader.scanNameChars(XMLReader.java:1186)
     at oracle.xml.parser.v2.XMLReader.scanQName(XMLReader.java:2015)
     at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1319)
     at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:376)
     at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:322)
     at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:226)
     at oracle.xml.jaxp.JXDocumentBuilder.parse(JXDocumentBuilder.java:155)
     at oracle.dbtools.crest.model.metadata.XMLToObjectTransformer.transformToObject(Unknown Source)
     at oracle.dbtools.crest.model.metadata.XMLToObjectTransformer.transformToObject(Unknown Source)
     at oracle.dbtools.crest.model.metadata.XMLToObjectTransformer.transformToObject(Unknown Source)
     at oracle.dbtools.crest.model.metadata.XMLTransformationManager.transformFromXMLToObject(Unknown Source)
     at oracle.dbtools.crest.model.metadata.XMLTransformationManager.transformFromXMLToObject(Unknown Source)
     at oracle.dbtools.crest.model.metadata.XMLTransformationManager.openDesignPart(Unknown Source)
     at oracle.dbtools.crest.model.design.Design.openDesign(Unknown Source)
     at oracle.dbtools.crest.swingui.ControllerApplication$Recent$1.run(Unknown Source)

Hi,
I noticed that I can not change the precision on a column in one of my tablesProbably that's a FK column.
For the other problem - probably it's caused by merge conflict and you have in the file symbols <<<<<< >>>>>> and non valid XML elements. You can try to replace the content of the file manually using version from repository. There will be better processing of suche cases in next release.
Philip

Epson r1800 - 'Media not loaded correctly'

Hello All,
I'm having a lot of trouble with my Epson r1800 - I've searched around the internet a bit for solutions but so far haven't come up with anything. To start, I have updated the epson drivers and also tried Gutenprint drivers.
Basically, no matter what I try (including the standard nozzle checks etc...) I always get the message 'Media not loaded correctly'. Occasionally pages will feed through the printer, but they are blank and regardless I get the media not loaded correctly message. Does anybody have a workaround or solutions for this?
Thanks!
Gavin

Try using the following directions from a message from Epson. This corrected my problems with an Epson R1800 and Leopard.
Thank you for taking the time to contact Epson. It is my pleasure to
respond to your inquiry.
If your output is faint or if the driver settings and/or features are
missing, your system may have automatically added the printer using the
Gutenprint driver. Many Epson drivers are provided with Leopard but the
driver for your printer needs to be downloaded from the Epson website.
Determine Which Driver is Currently Being Used
1. Click on the Apple icon in the upper left corner of the Finder and open
System Preferences.
2. In the System Preferences window, click on Print & Fax.
3. In the list of printers on the left side of the Print & Fax window,
click once on your Epson printer to select it.
4. Check the name of the driver being used; it is displayed in the center
of the Print & Fax window next to “Kind”.
5. If the driver name displayed next to “Kind” is Gutenprint, the incorrect
driver is being used. Follow the steps in the next section to select the
correct driver.
Selecting the Correct Driver
1. Turn off the printer.
2. Delete the print queue and remove the printer from Print & Fax by
clicking on the minus button under the list of printers. Click OK to
confirm the removal.
3. Go to the Epson support website (www.epson.com/support).
4. Select your product model and download the driver for OS X 10.5 Leopard
operating system.
5. Double-click the downloaded file and follow the on-screen instructions
to install the printer driver.
6. Click on the Apple icon in the upper left corner of the Finder and open
System Preferences.

Premiere Pro EDL not loading correct frame rate in SpeedGrade

Similar Messages

Maybe you are looking for