Premiere Pro effects remain on After Effect replacement Composition?

Premiere Pro CS6
After Effects CS6
When I am working on a timeline in PPCS6 and I replace a clip with an abode AE composition, does that clip, when moved over to AE and then back to PP, retain the color correction and other premiere adjustments I may have made?  That is, when I look at the clip again in PP, after it I have adjusted it in AE, I don't see the effects I applied onto it in PP.  However, I am wondering if those effects are still there but now contained within the comp.
Thank you for taking the time to read this.
Robert

No, because AE uses the source video of that clip.
In PR CS6 you can use adjustment layers for Color correction etc. on top of your clip and if you replace the clip with an AE comp. it will then affect the comp.

Similar Messages

  • Why is Dynamic Link between Premiere Pro CC 2014 and After Effects CC 2014 not syncing audio changes?

    When I try to use a Dyamic Link between something I've cut in Premiere and a composition in After Effects, if it is simply an audio level change it will not update in AE.  Only if I alter the Video track does it then take the changes reflected.  Any suggestions as to what is causing this?
    Running Adobe Premiere Pro CC 2014 and After Effects CC 2014.

    As Dave alludes, AfterEffects is all about the visual changes ... or at least, mostly. For changes to the audio outside of PrPro's internal controls, highly suggested you use Audition instead. It is all about the sound ... and yes, will update PrPro when used correctly.
    Neil

  • How to work with Premiere Pro cs5.5 and After Effects cs5 together?

    I have edited my movie in premiere pro cs5.5 and made the rough cut. In premiere, i have edited the video, put in soundtrack and foley. Now, i need to add muzzle flashes & blood splatters in some scenes and final color correction using After Effects cs5.
    When i import the premiere project in AE and make the changes, and then i export it back as premiere project. When i open this prmiere project, it shows vaious kind of errors and no changes are retained that i did in AE. Also, when i import the premiere project (which has 4 different sequences) in AE, all the media that has been imported in the premiere project also opens in AE making it difficult to organize the media.
    How should i work now so that i add vfx and color correction using AE cs5?
    I thought of exporting the video from Premiere pro and then open the video in AE and add vfx to some scenes and color correction to the full video and render it out again. But, this is the first time i am using AE and i am not sure if this is the best way. PLEASE HELP.
    Or, i could import the whole project in AE, add vfx, do color correction AND then export to video from AE. But i think, it will be better if i export the video from Premiere as it has loads of options to choose from while exporting to a movie.
    The dynamic link does not work between Premiere Pro Cs5.5 and After Effects cs5. Even if it does, its not working on my pc.
    All the footage is in HD and i want the final result in best quality HD too. PLEASE Help!

    If you are working between After Effects and Premiere Pro but with versions that are not the same number, you need to just work with movies rendered and exported as intermediate, lossless files.
    Dynamic Link only works between After Effects and Premiere Pro of the same version number, and only when they are installed as part of the same suite.

  • Why is the Nvidia GTX 680 CUDA card supported by Premiere Pro CC, and NOT After Effects CC?

    Why is the Nvidia GTX 680 CUDA card supported by Premiere Pro CC, and NOT After Effects CC?

    Thanks Todd for all the info.  It is much appreciated and very helpful.  On a different note, could you possibly direct me to the correct forum to fix this bug?  I am suddenly recieving a warning on my System SSD referencing Adobe Exchange.  Here is a screen grab to best explain:

  • Premiere PRo CC Clip durch After Effects Komposition ersetzen funktioniert nicht

    Wenn ich von Premiere aus einen Clip über die Funktion " Durch After Effects Komposition ersetzen" bearbeiten möchte, öffnet sich AE, legt ein neues Projekt an das ich dann auch speichere. Der Clip wird im Projektfenster auch angezeigt allerdings mit einer schwarzen Oberfläche. Wenn ich den Clip dann ins Kompositionsfenster ziehe wird eine neue Komposition angelegt aber das Vorschaufenster bleibt schwarz.
    Wenn ich einen Clip den ich vorher aus Premiere exportiert habe und den dann in AE importiere funktionerts. Kann mir da jemand weiterhelfen????

    Geht leider immer noch nicht. Kann zur Zeit nicht auf Forum zugreifen.
    Am 12.01.2015 10:53 schrieb "Doc Maik" <[email protected]>:
        Premiere PRo CC Clip durch After Effects Komposition ersetzen
    funktioniert nicht  created by Doc Maik
    <https://forums.adobe.com/people/Doc+Maik> in Deutsche Foren - View the
    full discussion <https://forums.adobe.com/message/7087075#7087075>

  • Premiere Pro Dynamic Link to After Effects stopped working

    For about 6 months my Link between Premiere Pro and After Fx is not working. Premiere Pro sends it to After FX but when it is there the composition is empty and no media has been exported, even though the PP timeline is marked as a linked compostion. Its entirely empty, the media has vanished.
    Id love to fix this issue. I guess it's a reinstall???
    Latest CC, 10bit BM uncompressed timeline, Maverick (though it wasnt working on snow leopard either).

    Sorry guys, may have just found the problem! Just realised that somehow my CC version on my disk is not listed as downloaded in my Cloud drop down pane. So im updating it and im assuming that will fix the problem.

  • Mac Pro display remains black after start up.

    My 2008 Mac Pro display remains black after start up.  It is plugged in properly and the light comes on, but the screen stays black.  It first started doing this about a week ago, but after a manual restart or two, it would start up properly with the display working.  Today the display has remained black every time I've tried to start up.  Any suggestions for troubleshooting would be greatly appreciated! Thanks!  

    Safe Mode uses a very simple way of talking to the screen -- it does not even load the screen driver, and it uses a very common low resolution.
    If it does not work that way, it simply does not work. You need a replacement graphics card.
    User Tip: Mac Pro silver tower (2006-2012) Replacement Graphics cards

  • I can edit on Premiere Pro 6 files, but after a dozen keystrokes, the space bar and cursor keys stop working while the save function works

    I can edit on Premiere Pro 6 files, but after a dozen keystrokes, the space bar and cursor keys stop working while the save function, render workspace function, export file are still operational. How can I fix it so I may complete my assignment?
    Besides DaVinci Resolve, Adobe Creative Suite 6 is the only software on the machine. I am using Windows 7 Professional 64-bit Operating System on AMD FX 6100 six-Core Processor at 3.31gHz and 32 GB RAM memory. There are two SLI-bridged GTX680 NVidia cards.
    The software was very stable for the last six months, working with 720P proxy files from 2.5K masters (Blackmagic Design Camera). I am working on a feature-length project that exceeds 1000 edits. I have broken the file into 2 one hour segments.
    I have deactivated the software before reinstalling the entire OS from scratch. PP6 was very stable for 48 hours. Then the freezing space bar returns. After a dozen strokes into the project, same problem.  I have made cache files store next to originals, I have deleted preview files if they were corrupted and causing instability. Am I missing something?
    I have Microsoft Security Essentials for virus protection. I double checked the memory for damage/defect. Nothing says that the motherboard or other components are damaged.
    I am in film competition overseas and need to have deliverables in less than a month's time.  I lost the last two weeks troubleshooting and this crisis came at an inopportune moment of the project.
    Any assistance would be greatly appreciated.

    Still getting software freezes but found a way to mitigate for the mean time.
    Upon launching Adobe Premiere Pro, hit CTRL-ALT-DEL to launch TaskManager as well.
    You will want to highlight Adobe QT32 Server.exe
    Right click and select "End Process Tree"
    You will get considerable stability in the program, long enough to get timing of cuts done. Be sure to save often.
    If the program freezes, do not hit Save. You definitely want to avoid saving the corruption into your TimeLine
    CTRL-ALT-DEL to relaunch the TaskManager and highlight Adobe Premiere Pro.exe
    Right-click to "End Process"
    No need to reboot the whole system; just launch Premiere Pro again and continue with the session. Note that your work reverted to Last Save.
    Hope this helps until the bug is fixed.

  • Premiere pro CC drop playback after update 7.2.1

    Why premiere pro cc drop playback after update 7.2.1? I have a MacBook Pro late 2011 with ATI Radeon HD6770m 1GB. Premiere pro cc 7.1.0 run normal, ok, without crashing and drop-freeze frame, but after update 7.2.1 i have all this problems.

    Just came on here to post about the buzzing transitions, glad to see it's been fixed already!
    Another thing though I don't see mentioned, since moving to 7.2 I find audio playblack is out of sync while editing, and in some clips significantly more noticeably than others. This only happens during playback, if I pause and scrub manually, the audio is perfectly in sync. This actually messed up a  project for a client. I thought the audio off the camera was  out of sync in one segment so I bumped it a few frames before exporting. Didn't check it after of course and sent him the file, then got a reply back that it was out of sync in that spot. Check the exported video and sure enough, he was right. Check it again in project but it looks in sync. So I bump the audio back in the timeline so that it LOOKS out of sync again during playback, but the new exported video is perfectly in sync!
    Editing a TV show now with hundreds of clips and it's maddening with some looking fine, some looking a little off, and some looking completely off and having to manually scrub to check and be sure along the way.
    Hopefully this is also fixed in this update..will see tomorrow.

  • Dynamic Linking between Premiere pro cs6 CC and After Effects is shaded grey and not working.

    Hi, I currently have a CC membership with everything included in the package. I have already downloaded Premiere Pro CS6 and After Effects. However, I cannot figure out why , when I right click a video clip in Premiere, the dropdown menu has the 'replace with after effects' option within the list greyed out, apparently not an option for me. I've browsed several tutorials and all of them illustrate using dynamic linking with ease as a readily available option. Can anyone help with this please?

    Thank You, Jim -
    Unfortunately that specifically did not work.
    Based on another comment sent to me, here is what did.
    In PProCC
    File > Adobe Dynamic Link > New After Effects Composition
    In AECC
    From that composition created from PPro, I imported the project (aep) initially created in AECC from another team member. Saved the file.
    Back in PProCC
    File > Adobe Dynamic Link > Import After Effects Composition
    Magic.

  • Premiere Pro CS6 vs. After Effects CS6

    I would like to know which of these programs would be best for me.   I shoot video with my Canon Vixia HFS 20 HD camcorder.  I have a decent green screen studio set up in my basement.  I currently use Corel VideoStudio Pro X3 and am not happy with the poor chroma key features it has.  Is the Chroma key the same or similar on both of these programs?  I would rather spend less for Premiere Pro unless there is some really cool stuff in After Effects that would make the additional cost worth it. 
    I just bought a new Dell XPS 8500 desktop with a Core i7 processor, 12GB of RAM, Nvidia GeForce GT 640 1GB GDDR5, 460 watt power supply, Windows 7 Home Premium 64-bit and a 2TB hard drive.  I just installed a WD Black 2TB internal second hard drive.  I would be willing to upgrade the graphics card and/or RAM if it would make a noticeable difference.
    I would really like some good advice on what to buy and suggestions of computer upgrades if needed.
    Dan Hauck

    1. If you feel unhappy with the reply, why did you mark it as the 'correct answer'?
    That just decreases the probability some other Forum users visit your thread and give you an answer you will be more satisfied with...
    2. You probably misunderstands Creative Cloud Files concept. Those 20 GB are for sharing files, they don't limit you in storing and editing footages on your hard drive, and you don't have to use it.
    3. Both PrPro and AE have sets of keying tools that can do a decent job. However, the result always depends on many factors such as set up quality, the footage quality (it's difficult to pull a good key out of highly compressed footage) and your skills. Since AE is a compositing tool, you can pull better key there out of poor quality footage via several steps (which requires investing some time on learning).
    Just download trial versions of both applications and test on your own.
    If you're unhappy with built-in keying tools and have some money, you can extend them with 3-rd party plug-ins (e.g. Red Giant Primatte Keyer).

  • Ich will Premiere Pro CC abonnieren  - ist After Effect gleich mit dabei oder muss das extra abonniert werden??

    Ich muss zugeben das ich die Seite von Adobe relativ unübersichtlich finde. Ich benötige das Videoprogramm Premiere pro cc - möchte aber auch das After Effect dabei haben. Muss ich das separat ordern oder ist das in Premiere pro cc mit dabei? Ich benötige nur die beiden Programme, welches Abo ist das nun?
    Vielen Dank voraus.

    Es sind zwei separate Programme und rein rechnerisch lohnen sich die Single-App-Pläne dann schon nicht mehr und man kann gleich die volle Packung nehmen...
    Mylenium

  • Premiere Pro CS5 AND/OR After Effects ?

    Hi guys,
    I am quite new, I have only done one videoproject and that was in Premiere Pro CS4. Now I got a new machine and have both Premiere Pro CS5 and After Effects. I have started learning AE from some videos and it is quite impressing what you can do there.  So I hope I can use AE to  improve my videos.
    My question is, shall I do the project in PPCS5 and then connect to AE for making special effects on clips or shall I do the whole project in After Effects ?
    If I choose AE for the project, will I miss some functions from Premiere Pro?
    Many thanks in advance !
    Sven 

    Thanks for that.
    I also posted the same question in the After Effects Forum and got some good answers there. I got this link that is very helpful.
    http://help.adobe.com/en_US/aftereffects/cs/using/WS4648B7F7-2D89-4765-BC8A-271D9A7574A3a. html
    So now I hope I am on track again!
    Thanks again.

  • Importing into Trial of Premiere Pro 5.5 and After Effects 5.5

    My board of management have asked that I evaluate Premiere Pro 5.5 as a replacement for Premiere Elements 9, which we find not quite sufficient for our needs.
    According to the documentation, with trial version 5.5 we should be able to import MPEG-2, .mov, .mts, .mts2 etc. which were not available in the trial of version 5. When I try to import these formats, the message, 'There was an error decompressing audio or video', or the message, 'this format is not supported' appears. I have no issue importing into Premiere Elements 9.
    Should I be able to import these formats into the trial version of 5.5, it is making it impossible to fully evaluate the products without this capability
    Intel i7 930, 8Gb ram, Radeon HD 5770 1Gb, 2TB HDD

    >MPEG-2 files, the video was taken with a Cannon MiniDv
    That should not be... when you do a Firewire transfer from minidv camera you SHOULD end up with DV AVI (or, in Mac land, an SD MOV file)
    If you are getting mpeg2 from a firewire transfer... something is wrong

  • Multicam editing in Premiere Pro CC very slow after latest update.

    So I installed the latest update for Premiere Pro CC a couple of days ago and now every edit I make in my Multicam sequence takes about 10 seconds to take effect. No matter how small an edit I make. While it´s taking affect the computer just freezes.
    Is it possible to downgrade or does someone have a sollution?

    @Devinclk: You specify that you're on 7.2. If that's accurate, then please update to 7.2.2. Among the many bugs fixed were several involving multicam.
    @Mediatek: first off, as a CC subscriber you most certainly do have access to the CS6 version of PPro. On this download page, use the drop-down under "In This Version" midway down the left side of the page to select CS6, then click "Download." As to the problems you're having with CC, if you start a new thread and provide as much detail as possible, there's a good chance someone around here will be able to help troubleshoot it. Remember, while you're choosing to emphasize that you're "another struggling CC user," tens of thousands of customers are using the program without such problems. So there's a particular issue--or confluence of issues--causing particular problems in your case. The first step to resolving the problems is for you to share specific & thorough enough information for someone to help.

Maybe you are looking for