Premiere Pro & Encore Errors - CS4 / CS5 Side-By-Side Install

Hello, all.
I am trying to use CS Production Premium CS4 and CS5 together on the same machine. I have been getting some really crazy errors and happenings lately on Premiere Pro (CS4) and Encore (both CS4 & CS5). In another forum in Creative Cow, someone mentioned that CS4 and CS5 should not live on the same partition, and that may be causing my problems. You can view that thread here: http://forums.creativecow.net/thread/3/908105.
The long and short:
I have had CS4 installed for a while on my machine (see specs in the signature line), and installed CS5 alongside using all the default install values.
Taking the troubled applications one at a time, here are some errors I am encountering:
PREMIERE PRO CS4
Upon launch, the following message appears:
This is what prompted someone to note that CS4 & CS5 should not live on the same partition. I HAVE SINCE UNINSTALLED CS5 and the error still persists.
ENCORE CS4
Upon launch, it automatcially crashes and the Windows error messages pop up:
I HAVE SINCE UNINSTALLED CS5 and the error still persists.
ENCORE CS5:
Shorter DVDs with simple timelines seem to transcode and burn just fine. However, with longer timelines or more complex projects, it returns the following errors:
A detailed view of the error message is below:
I have not been able to test this after the uninstall of CS5, but I can only assume that it still has this issue.
As far as I can tell, Premiere Pro CS5 works just fine.
In addition to the previous errors, After Effects and Premiere Pro CS5 also have trouble rendering to networked locations (i.e.--mapped drives). The renders fail immediately with "unknown errors". I am not sure if this has something to do with the side-by-side configuration or not, but it is another issue that has been problematic. The CS4 versions can render to any location with no problems.
Any guidance on how to get CS4 and CS5 to coexist will be greatly appreciated! I do need both versions for various reasons, so getting rid of one is not an option (and as the uninstall of CS5 has proven, not effective).
Thank you!
Stephen Rutherford
Graphics Producer: Gale Force Media, CanesVision & Wolfpack TV
[email protected]
http://www.facebook.com/swrutherford
http://www.twitter.com/CVHD
CAROLINA HURRICANES: 2006 STANLEY CUP CHAMPIONS!
Current System Configuration:
Intel i7 920 PC 2.67 GHz
Windows Vista Ultimate 64 Bit
12 GB DDR3 RAM
NVIDIA GeForceGTS 250 512MB DDR3
Adobe Production Premium CS5/CS4/CS3
3D Studio Max 2011/2010/2009

You can certainly run CS4 and CS5 applications on the same computer, from the same partition, and even at the same time. Problems do ari
se if you install CS4 after CS5, but installing CS5 after CS4 should work fine. Every one of my computers has CS4 and CS5 on them (and some have CS3).
See this document for some information about the "side-by-side configuration" error:
http://kb2.adobe.com/cps/406/kb406122.html

Similar Messages

Premiere Pro CC2014 error ComponentFactory.cpp-69

I tried to open a project that I started with CS6 and tried to open in CC2014. It contains prores422 .mov files, Premiere Pro Debug Event pop up appears with message,
Premiere Pro has encountered an error.
[..\..\Src\Component\ComponentFactory.cpp-69]
I noticed someone (drbuhion Mar 19, 2014 1:07 AM) asked this question (Premiere Pro CC error ComponentFactory.cpp-69) and there was no answer. Any chance of resolving it?

Thanks Mark. I just reinstalled Premiere Pro CC 2014 a few days ago and used the Adobe Cleaner to resolve a different issue this week. (It worked.)
I had to start a project with a client’s laptop, which has CS6, then finish it at my home office, where I use CC 2014 (which I love). Granted, I’ll probably be in a jam if I have to edit it on that client’s laptop for some reason, but I don’t think that will happen.
Oddly, a different project that I did on that client’s laptop with CS6 opened fine (which actually will benefit from the features of CC 2014).
For what it’s worth, I worked around the problem by starting over with a new project to re-do the problematic one, using my PC with CC 2014.
Bill

Every time I install the Premiere Pro, an error:213:10 shows up, how do i fix this? [was: Premiere Pro.]

Hi, every time I install the Premiere Pro, an error:213:10 shows up, how do i fix this?
Someone please help! Thanks!

Error code 213:10

Premiere Pro startup error

Hello,
When I open Premiere Pro on my computer, I now get a startup error message that says: "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again." What does this mean? I cannot get into the program! I have a Windows 7 OS and am on the Creative Cloud Subscription. Thanks!

Hi Journstud89,
Please check http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
^Ani

Tried to reinstall my CS6 master collection onto my iMac. It will not install - In Design, Fireworks, Premiere Pro, Encore, After Effects, Flash Professional, Photoshop, Illustrator & Prelude. Could you give me some advice. I noticed problems when I was d

Tried to reinstall my CS6 master collection onto my iMac. It will not install - In Design, Fireworks, Premiere Pro, Encore, After Effects, Flash Professional, Photoshop, Illustrator & Prelude. Could you give me some advice. I noticed problems when I was doing some 3D work and the computer kept crashing and thought I would just reinstall my software.

uninstall (using the uninstallers), clean Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 and then reinstall.

Premiere Pro CC Title templates are missing + cannot be installed

hi,
I just realised that I don't have any title templates but i need them quiet urgently.
I went on to this website: Library, title templates, template projects missing: Premiere Pro, After Effects, Encore
where it stated that you have to download a zip file and place it in the presets folder of Adobe Premiere.
I did that but it wasn"t working. Then I took the Premiere Pro Family Content Installers folder and wanted to install it in order to place it in the presets folder and the installation always gets broken off stating that there is an error.
Is anyone familiar with that kind of problem and if yes, does anyone know how I can fix it?
Thanks in advance.
Mascha

Did you follow this part of the instructions on that link?

Premiere Pro uninstalled through control panel - still appearing as installed on Creative Cloud app - I wish to re-install but cannot

Premiere Pro uninstalled through control panel - still appearing as installed on Creative Cloud app - I wish to re-install but cannot

CC desktop lists applications as "Up to Date" when not installed
http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html

Encore & Premiere Pro CS3 with Photoshop CS5

Hi,
I have the CS3 suite on Vista 32 bit. I was wondering if I can keep the Premiere Pro CS3 and Encore CS3 and only upgrade Photoshop to CS5. Has anyone had any compatibility issues using this combination? Can Encore CS3 menus be easily edited in Photoshop CS5?
Thanks

Welcome to the forum
You cannot upgrade to a standalone program from a Suite.
But to answer your question: yes you can edit Encore CS3 menus with Photoshop CS5.

Premiere Pro/Encore CS5 playback issues

I successfully created a DVD (of a hockey practice) through Premiere Pro (linked to Encore) with no errors. It plays back properly on 3 different Windows 7 computers through Windows Media Player, but I tried it in my standalone DVD player and it will not even read the disk. This player is older, but it does play rented movies with no issues.
I tried the DVD I created on two other computers running XP OS with Windows media player. It played one one XP computer but not the other. On the one XP computer that was able to read the DVD, when the shot included a skater who was moving quickly, the image of the skater looked like it changed to vertical lines. If the static or slow moving elements of the shot are not look distorted. There is no distortion on the computers running W7 OS.
Since I am ovbiously new to this process, I was wondering:
1. Why the XP computers (and my standard DVD player) are not able to play the video and what I can do to compensate if a person who wants to view this DVD has XP or an older DVD player.
2. Why does the other player show quickly moving objects as distorted (and can I compensate for it).
Thank you to anyone who can help.

I'm not entirely sure what you meant by...
"Create an ISO (Encore) or folder on your hard drive (Encore or Premiere Elements) and then use the FREEhttp://www.imgburn.com/index.php?act=download to write files or folders or ISO to disc (send the author a PayPal donation if you like his program)"
Basically, there are three ways to publish a DVD from Encore:
Burn to Disc
Burn to Folder
Burn to Image
Two and three are similar, though different. In two, one burns to a VIDEO_TS Folder, which contains all of the IFO, BUP and VOB files required. This VIDEO_TS Folder can be burned to disc, say with the great, free ImgBurn, or similar, or can be played in most DVD software players. Note: Windows Media Player is not the best, and depending on several factors, might not even play a fully-compliant VIDEO_TS Folder. MediaPlayer Classic HC (free), or CyberLink PowerDVD (either the free, or commercial versions) would be better. There are also others that do a better job, than WMP.
For three, instead of the VIDEO_TS Folder, one burns an Image, or ISO file. Think of this as a ZIP file (though it is NOT a ZIP, but an ISO, the concept is very similar) with the VIDEO_TS Folder inside, plus its files included into an ISO container. This can also be burned to disc, and ImgBurn handles that task well, or can be played via some DVD software players (such as VLC Player), or "mounted" via other software, and then played by most DVD software players.
As you can see, two and three are similar, but there ARE differences. Some users prefer the VIDEO_TS Folder, while other like the contained ISO file.
Good luck, and hope that this helps,
Hunt

[Premiere Pro] Installation error - MS Visual C++ problem

Hello,
I've just tried to install Premiere Pro but At the end of the installation I get the message that Premiere Pro and Media Encoder cannot fully install.
For both is the detail message the same :
Exit Code: 6
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 4 error(s)
----------- Payload: Microsoft Visual C++ 2012 Redistributable Package (x64) 11.0.61030.0 {3E272A93-C06B-4206-AD02-0EBE02535E20} -----------
ERROR: Third party payload installer vcredist_x64.exe failed with exit code: 2147942750
ERROR: Failed to repair Microsoft Visual C++ 2012 Redistributable Package (x64). Please try repairing it by double clicking on the executable at "C:\Users\BEHEER~1\AppData\Local\Temp\{C32858D4-7839-40FF-B9D4-A89B95647490}\AdobeMediaEn coder_8_LS20\Adobe Media Encoder CC 2014\payloads\Microsoft VC 2012 Redist (x64)\vcredist_x64.exe", or download and install the latest Microsoft Visual C++ 2012 Redistributable Package (x64) from Microsoft website - www.microsoft.com
----------- Payload: Microsoft Visual C++ 2012 Redistributable Package (x86) 11.0.61030.0 {873BE68F-480F-49A6-9649-F98CAB056AFC} -----------
ERROR: Third party payload installer vcredist_x86.exe failed with exit code: -2147024546
ERROR: Failed to install Microsoft Visual C++ 2012 Redistributable Package (x86). Please try installing it by double clicking on the executable at "C:\Users\BEHEER~1\AppData\Local\Temp\{C32858D4-7839-40FF-B9D4-A89B95647490}\AdobeMediaEn coder_8_LS20\Adobe Media Encoder CC 2014\payloads\Microsoft VC 2012 Redist (x86)\vcredist_x86.exe", or download and install the latest Microsoft Visual C++ 2012 Redistributable Package (x86) from Microsoft website - www.microsoft.com
What does that mean please?
And what's the solution?
Thank you very much,
Annelies.

Hi Annelies,
Please try downloading MS Visual C++ 2012 Redistributable Package x86 from : http://www.microsoft.com/en-in/download/details.aspx?id=30679
After that try installing and check.
In addition, you can refer the Kb Doc : http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html.
Please see Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to review your installation logs
Regards,
Rave

Premiere Pro Installation errors! Help me!

I disables my firewall, Kaspersky , I'm the administrator of my computer and I tryed "Run As Administrator". but that didn't help.
I'm using a 32-bit Windows 7.
The installation stops very close to the start and says Installation Failed
The error code:
Adobe Premiere Pro CS4
Error:
Error 1625. This installation is forbidden by system policy. Contact your system administrator.

Hi,
I'm sorry you're running into problems installing Premiere. Would you mind reposting this issue over on the Premiere forums?
Thanks,
Chris

Premiere Pro CS6 error

Download is OK but why this error when launching program: "Program couldn´t start corectly (0xc000007b)"

A123x123 I have moved this discussion to the Premiere Pro CS5, CS5.5, and CS6 forum. The users in this forum may have additional suggestions you can try to resolve your current launch difficulties.
For some general troubleshooting steps you can perform please see Troubleshoot system errors, freezes | Windows | Adobe software - http://helpx.adobe.com/x-productkb/global/troubleshoot-system-errors-freezes-windows.html.

Premiere Pro CC & AME CC crash on startup (after installing Encore CS6)

Hi guys,
Yesterday Premiere Pro CC was working correctly. I installed the Premiere Pro CS6 family, uninstalled Premiere Pro CS6 to preserve Encore CS6, and then arrived this morning to a machine that wouldn't run either Premiere Pro CC or Encore CS6.
Here's what I've done, and I'm still experiencing crashing on startup.
UPDATE #1: It's worth noting that Premiere Pro CC starts correctly when I logon as a new user, yet I've checked all preferences and my permissions are all set to read and write.
UPDATE #2: Adobe Media Encoder also crashes upon startup. How about some help?
UPDATE #3: I've reinstalled all 23 CC apps and run the Adobe CC Cleaner. Still nothing.
Unintalled Encore CS6
Uninstalled and reinstalled Premiere Pro CC
Deleted the preferences upon startup by pressing the SHIFT key
Looked into error 0xc000000 - this is not in my crash log so unhelpful
Looked at all the permissions of my library and preference files
I can't find any other options close to a solution in the forums.
Some quick info --
Model: iMac14,2, BootROM IM142.0118.B00, 4 processors, Intel Core i7, 3.5 GHz, 32 GB, SMC 2.15f2
Graphics: NVIDIA GeForce GTX 775M, NVIDIA GeForce GTX 775M, PCIe, 2048 MB
OS Version: Mac OS X 10.9.2 (13C64)
Please look into this ASAP. I have urgent client work that needs doing!
Thanks!
Chris

Read Bill Hunt on BSOD shutdowns http://forums.adobe.com/thread/772169
-win32k.sys BSOD http://forums.adobe.com/thread/1404938?tstart=0
-and an Encore fix http://forums.adobe.com/thread/1060443

What is best encoding/sizing option? Premiere Pro/Encore

I have heard some people say that assets should be encoded before being brought into encore, others say to use dynamic link. If I am going to go the encode first route, I would do this in Premiere Pro CS5.
If I am taking a 720 X 540 (1.0) 30.0 fps 48000 hz Mpeg 4 asset and want to convert this to dvd what is the best setting in Premiere Pro?
Do I create a sequence which is 720 X 480 (0.9091)   29.97    48000 hz and then when exporting use the following settings:
Format MPEG 2 DVD
Preset    Match Source attributes highest quality
Or do I change this to custom settings:
Format: MPEG2
Preset   Custom
Change the quality setting to 5
TV Standard NTSC
Frame rate   Do I leave it at the default of 29.97 or do I change this to 30?
Pixel Aspect Ratio- Do I leave this at standard 4:3 (0.909) or change this to square pixels (1.0)?
Profile and Main do I leave these at the defaults?   Main
Does it make any difference if the ultimate output will be on a 25 GB blu ray disk?
Encore CS5
Premiere Pro CS5
Quad Core 2.4 GHZ
6 GB memory
Windows 7 64 bit
nvidia geforce 8500
700Gb free space on hard drive

Use an MPEG2-DVD preset. DVD is very strict about the specifications of video files. Using a generic MPEG preset allows things to be thrown off spec.

Errore di avvio di Adobe premiere pro. Error starting Adobe premiere pro

Ho scaricato Adobe Premiere Pro e ogni volta che provo a lanciarlo mi compare questo messaggio: "Errore di avvio di Adobe premiere pro. Premiere pro non può accedere alla cartella delle preferenze. E' possibile che l'utente non disponga dei permessi.....". Io ho modificato i permessi delle cartelle, ma continua a ripetermi lo stesso messaggio, senza neanche permettere alla applicazioni di aprirsi. Cosa posso fare?
P.S. La cosa strana è che Premiere è l'unico programma che porto la voce "pro"...tutti gli altri sono solo CC. Non so se può essere un fattore....
Grazie in anticipo dell'aiuto
I downloaded Adobe Premiere Pro, and every time I try to run it I get this message: "Error starting Adobe premiere pro. Premiere Pro can not access the preferences folder. It 'possible that the user does not have permission ... .. ". I tweaked the permissions of the folders, but continues to repeat the same message, without even allowing the applications to open. What can I do?
P.S. The strange thing is that Premiere is the only program that harbor the "pro" ... all the others are just CC. I do not know if it can be a factor ....
Thanks in advance aid

Doing Run as Administrator http://forums.adobe.com/thread/969395 [says Encore and also for "All" versions of Premiere] will sometimes fix "odd" errors

Premiere Pro & Encore Errors - CS4 / CS5 Side-By-Side Install

Similar Messages

Maybe you are looking for