Premiere Pro Export question -

i need help with the following- i want to export some Canon 5D .mov clips that i have adjusted in regard color correction and created in and out points - i want to export to media those files and hand them off to an editor- what is the best way to do this so they retain the same characteristics as the source (5D) files- in regard to Codec/compression/file size / qulaity - it seems when i choose (click) "match sequence settings" in the export settings dialog box the resulting exported file does have the same codec ( MPEG I-Frame) as the original but the resulting file size is is only about half the size as the original .mov souirce file ? so what is the best way to export these files- so an editor can use them with my edits intact - but so they are the same quality or better as the original files?- thanks for any help

best way to do this so they retain the same characteristics as the source (5D) files- in regard to Codec/compression/file size / quality
Simply put, it's not possible. Keeping the quality will make them larger, keeping their size will add degradation.
The better option is to give your editor the raw video files, let him edit, and them do the color corrections after.

Similar Messages

Premiere Pro exporting solutions?

I need desperate help in the realm of exporting...
In a short summary:
I am currently shooting with a 5D Mark III and a 24-70mm
When I shoot, I keep my lighting equal throughout the histogram, I keep a reasonable f-stop to obtain better focus, I use double the shutter speed when shooting at a certain frame-rate, and I keep my ISO at the native.
All of my RAW footage looks fantastic! However once I get it through Premiere Pro and export it, the final product looks like a major decrease in quality.
Here's my usual workflow..
Import RAW files into Premiere Pro with no conversion into ProRes or anything
Create my sequence using "Create Sequence from Clip"
Do all my cuts
Add color correction with "3-Way color corrector" as well as add a subtle Unsharpened Mask.
Then I export from Premiere (Even though Media Encoder final outputs looks exactly the same quality)
Export as:
H.264
Vimeo HD 1080 2.39
And then as I said... quality suffers..
What's an appropriate workflow that will help me achieve better exporting results? Am I doing something wrong?
Thanks in advance for the help!

Well, as joe and Jim have said, it is difficult to help without a little more information. First of all, congratulations on getting the 5D Mark III. I researched it yesterday after a discussion about bit rates. If you are using the all I-Frame setting, you should be getting some very good video, assuming all of the correct composition, lighting, settings, etc.
What I can tell you is that the Vimeo preset uses 5Mb/s whereas the YouTube preset uses 8Mb/s. That can be significant with some footage, and not so much with other footage. So I suppose the first question is: are you using Vimeo?
I have done extensive research on the difference between my camera's video and photographs scaled to the same frame size and the video is not bad. I had the assistance of one of the smartest video guys I know so I am confident of the analysis.
Not great, but not bad. And the problems require about a 300% zoom to really analyze them. But that is not your issue. You want to see your video exported as clean as it was imported. That isn't possible, but you might be able to get closer if you post a few seconds of video that you want to export, and then post the export, along with a screen shot of your settings (unless you are truly using the default). Then we can all try it and see what happens.
You might want to shoot 10 seconds of something with no motion at all. Then 10 seconds of a lot of motion. It would make for a better analysis. Shoot it specifically for this test. Have some text in the shot from a box or a sign, or some other sharp lines.

Premiere Pro CS4 question on how to integrate into my website

I have a simple question...
I used Premiere Pro CS4 to create an Avi video.
And now I need to integrate it within Dreamweaver CS4 to upload it to my website.
I never did it, so I don't have any idea on how to do it.
Could someone send me a tutorial or website with explanations.
Thank you,
MAthieu
www.courtier-remax.com

Mathieu,
I can't answer for Premiere but if you have Encore you can use your avi file and export as flash flv file.
Encore includes menu templates for use with your flash file and varying sizes of flash export dimensions
depending upon how large you wish your final file and view to be.
Creates a folder with everything for you including index.html file and all you have to do is transfer the folder
to your website directory and hyperlink. Voila!
Sorry I can't point to any specific tutorials at the moment.

Adobe CC Premiere Pro Exporting Excruciatingly Slow... Please Help?

Hi guys, school project due in a few hours, and I've been fighting with premiere pro for close to 15 hours on a 15 minute video. It's pretty basic, a little bit of footage and a few pictures in 1920x1080, but for the life of me this thing will not export. It starts off very quick but slows to a crawl and then curls up and stops. My system doesn't pull any punches: i7 3770k, 16 gb 1600 mhz ram, 2x 780 ti. Any suggestions??? I'm dying here.

Thank you for the help!
SAFEHARBOR11 wrote:
There should never be gaps in the timeline - insert black in those spots then.
Please post a screen shot of the export setting panel, that is often very helpful with export issues
Thanks
Jeff Pulera
Safe Harbor Computers

CS4 Premiere Pro EXPORT settings for embedding videos in PDF

I am trying to embed a few short videos into a PDF ebook and my PDF file size is massive. I want the videos to still look good quality as I put a lot of effort into making high quality videos for my ebook.
Does anybody have any advice for export settings in Premiere Pro for the use in PDF documents? I've played around with the various preloaded export settings but I'm wondering if I can customize the settings to look good in a PDF.
(I realize Acrobat will convert the video into flash for consistent play-black)
(And not sure if this matters but my current videos are 60fps 1280 x 720 HD shot with a Canon 7D)
All advice would be greatly appreciated!!

Unfortunately, you have posted to the Pr (the precursor to PrPro) forum, so you'll likely not get as much traffic for your thread, as you would in the PrPro forum. Maybe our tireless MOD's can move it out for you, so you'll get more "eyes." Here is the Adobe Premiere Pro Forum.
Good luck,
Hunt
Oops! It looks like Adobe has changed the forum structure on me. Ignore my reference, as things changed overnight. Mea culpa, mea culpa.
Message was edited by: Bill Hunt - Added last line.

Premiere Pro Exporting Issues using ProRes LT

Using Premiere Pro CC and is currently up to date. When exporting ProRes LT (1920X1080) I am getting constant glitches and purple/pink scan line across my footage. This happens within the timeline and the export. Raw footage is clean. Footage shot on a Canon 5D Mark ii. System: Mac Pro (2013 - The trash can one), 3.5GHz 6-Core Intel Xeon E5, 64 GB 1867 MHz DDR3 ECC, AMD FirePro D500 3072MB, OSX 10.9.3.

HI Tswbmatt,
It sounds like you are hitting the OS X 10.9.3 bug, corrupting exports with the Mercury Playback Engine (OpenCL). Usually, it's with H.264 exports, but I"m not surprised it affects other codecs too. I'll add that to the bug report.
You can change the Mercury Playback Engine to "Software Only" or roll back to OS X 10.9.2 to fix it.
Thanks,
Kevin

Ideal Premiere Pro export settings BEFORE compressor

I'm editing with Premiere Pro these days... I've currently been exporting 1080p h.264 mov files in order to put them into compressor ad have compressor do it's thing to make them internet ready.
Is there an "ideal" setting that I should be using BEFORE I send my videos to compressor?
I'm trying to figure out why compressor is adding ghost frames to the beginning of my videos (when they don't exist before conversion) and I'm wondering if it might have to do with the initial video setting that compressor is trying to work with.
Any help would be much appreciated.
---Trav

Some would consider H.264 is already "internet ready".
What other changes are you making?
fwiw - even in PP I edit in ProRes and export a self-contained master file. Then I use that file in Compressor to do conversions to delivery formats.
x

Premiere Pro Beginner Question Re Gripper

I am using Adobe Premiere Pro CC 2014, and am just learning the basics of moving panels. One of the tutorials says to "click the gripper area in the upper left corner of the tab" and drag. However, I don't see a gripper area on any panel's tab. Maybe this isn't a problem since I'm able to drag the panel anyway. Has the gripper been removed from the application? Thanks!

Thanks for your reply. I won't worry about it. But the questions still remains - Did Adobe remove the gripper, or is my installation simply failing to show it?

Premiere Pro Export of AVCHD 'Shaky' Effect

Hi!
I'm working in premiere pro natively with AVCHD footage. I haven't had any problems editing in premiere, everything looks great, but when I export the sequence I get this strange 'shaky' effect specifically on my effects such as dissolves or text or adding movement to a photo. I made sure 'Frame Blend' is unchecked, I tried clicking 'always deinterlace' and 'flicker removal' but those didn't help either. Does anyone else have any ideas?

Sorry to hijack the thread, as I am in a similar boat. I am working on an ongoing project. I have cut a concert, then created a trailer all done in PP3. I brought in the song files from the concert(quicktime 960x720 raylight encoded) created clips that I wanted to use for the trailer and added some overlay titles. I need to export H.264 and used a custom setup that I have used many times already. When I go to export it gets 3 frames from the end and says "unknown error" I have been reading through the forum and many posts state there may be a corrupt clip. I went through and removed 1 clip at a time from the sequence and exported, every time it will stop. I disabled the text overlays with the same result. I disabled the audio track with the same result. I exported the movie to an uncompressed AVI and started a new project(DVCProHD 720P24) with that and the audio file created in Audition. Tried exporting to H.264 with the same failed results. As I said before I have used H.264 with no issues many times before.
Additional history with this is, earlier this week I encountered the problem of the Media encoder not showing up. I followed the instrucions for the fix and that is working correctly now. I also saw notices of people having issues with various versions of quicktime, specifically v7.4 and higher, I am running V7.6(472)quicktime pro. I was going to revert to 7.3 but on the uninstall it stated that I will loose the pro capabilities(can I just put the serial number back in?), so I did not revert. All other export functions work correctly.

Premiere pro exporting

hi all
i am using premiere pro cc
it is taking 9 hours to export a 48min timeline the footage is in 1440 x 1080
help please

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840

Premiere Pro exports fail to recognize changes made to Dynamic Link through After Effects

Hi there,
I am having an issue with Premiere Pro CC and Dynamic Links/After Effects CC.
I will be working within the PP CC timeline using footage, and then add motion graphics using Adobe Dynamic Link to AE CC. I notice an error in timing, or spelling, colouring - literally any type of error in AE CC that I want to correct. I go to AE CC and make the correction, go back to PP CC, and it shows up as changed. I go back to AE CC, purge media cache, memory, etc. and save the workfile. I go back to PP CC and export using Media Encoder. After waiting for the export to complete, I find it maintained the same error from a previous edit.
Does anyone know why this would be? Is there any way to avoid having to restart every time I make a small change to an edit?
Thank you in advance for any insight.

It has now happened to myself and my co-worker. The only way we have been able to "solve" the problem is by deleting cache/restarting both programs/restarting the entire computer. It shows up as changed within the Premiere project, as well as in the preview in Adobe Media Encoder - and then the final output does not reflect those changes.
Another suggested workaround to anyone else out there who is problem solving is exporting directly from Premiere, but none of these solutions seem to work 100% of the time, nor really address what this problem really could be stemming from.

Premiere Pro export issues. Unknown error messages, extremely slow export times, strange I/O & disk usage

Hello,
I'm hoping I can start getting answers to some big issues I've been having running Premiere pro. I've had similar issues with CS6 but it seems like with CC and every recent update, the problem hasn't been resolved, its even worse.
The main issue I have is seeing the 'unknown error' message everytime I try to export a file. I'm working with RED footage. When I turn off the CUDA support, I can export without the error but my export time goes from a few minutes to sometimes hours in the render time!
I've looked through pages and pages of forums and there are so many people saying the same thing, with millions of opinions of what the problem is. Regardless, the only thing I tried that worked so far is turning off the CUDA support.
Now something I recently noticed, is that the difference isn't the GPU usage, I still show GPU being used at 500mb or 1gb out of the 2gb that it has (GTX 680)
The strange thing is without the mercury playback option, I'm seeing that disk usage and I/O go way down to kbs from a very high number. This would make sense why I'm seeing such huge changes in render times even though it still shows my 6 core CPU maxed out and ram over 40gb out of 64 that are installed.
Does anyone have a suggestion on what may be happening here? Its the only thing that has plagued my system using Premiere since day one and there seems to be no way around it..

Best way to get a real answer is go to the Tweaker's Page, download the most recent PPBM benchmark test, and run it. It's a folder that has a resource monitoring/logging program and a PrPro project with files that is short but HEAVY in effects, both AE and PrPro, so it tests all parts of a system's capabilities from disc in/out to GPU capability/use to CPU, fsb, RAM, you name it ... and after sending that back in you get a complete report on where your computer did well and what the choke-points were.
Also ... over on the Hardware forum is the place where the techies amongst us hang ...
Neil
Tweaker's Page ...
http://ppbm7.com/index.php/tweakers-page
Hardware Forum ...
https://forums.adobe.com/community/premiere/hardware_forum

CS3 Premiere Pro - export to Encore settings closes PP

OS = XP, SP2
Adobe CS3 Master Collection
Capture = Matrox RT.X2 LE (MxTools ver. 3.6.0.145)
Video = Matrox QID LP PCIe
Hi,
This a new install of CS3, first project.
When exporting a full sequence to Encore from Premiere, selecting the "Settings" button causes Premiere Pro to close with no error messages.
If I accept the default settings, the export continues as normal and creates the files.
Single Layer chosen
Encoding Settings - Preset: NTSC Medium Quality
Defaults come up as;
NTSC, 720x480, 29.97 non-drop frame [fps]. Lower, Quality
3.0
48kHZ, 16 bit, Stereo, PCM
VBR, 1Pass, Min 1.50, Target 4.00, Max 7.00 [Mbps]
It's a very simple program in SD, 4:3 aspect, 93.5 minutes in length with a few still frames (jpg or bmp at 720x480) inserted. No audio or video effects processing. I'd like to tweek the settings or adjust the edited program if necessary for best/better quality.
Is this a known issue, am I missing something simple? I can't seem to find any theads (or Kb) pertaining to this.
Any ideas or solutions greatly appreciated.
Thanks.

I do not recall a lot of issues in CS3, that were specific to Matrox, but CS4 and its updates pointed up tons of issues with Matrox drivers. Matrox had play "catch up" with every iteration of the CS4 updates. However, there almost always seem to be some issue with Matrox and Adobe, so that would be a likely "candidate," as Harm points out. It might not be the correct one, but would be worth a look with a test on a totally non-Matrox Project.
It seems that when everything (and I do mean everything) is set up perfectly at all levels, the Matrox cards work well for many, even with PrPro, but there are just so many, who have little problems in the setup (drivers, etc.) and things go south in a big hurry.
Please report your findings, as they will likely help others.
Good luck,
Hunt

Premiere Pro Exported Audio Problem

I'm using Premiere Pro to edit the videos I just shot and I used the DeNoiser effect to get rid of the background hissing from my mic. The problem is when I export the movies the first few seconds of each clip have the background hiss and then it goes away. It isn't there when I am working on the file, only after it has been exported. Have you ever seen this or know how to fix it?

This happens sometimes. It would be better to do your audio work in Audition.

Premiere Pro Export to Encore

Hi would have to consider myself time poor in my experience with Premiere Pro but have managed to create some decent outcomes. I have a completed video and would basically would like to export my final project into Encore CS3 to finalise menus etc. I created the project in one timeline with 12 sequences in Premiere Pro 1.5. My understanding was that if I imported the project into Encore I would have access to each sequence to link to a menu button and so on. This does not seem to be possible and correct me if I wrong but it would appear by reading the manual etc that I need to EXPORT each sequence as a movie from Premiere Pro into a file which would then make it available to IMPORT as an asset into the Encore Project Tab and into the timeline in Encore.
Is this on the right track or way off the mark????
Johnno

What are your sequence settings and your export settings.

Premiere Pro Export question -

Similar Messages

Maybe you are looking for