Premiere Pro Freezing on "Scanning Audio Plug-ins"

Hi All,
Adobe Premiere Pro freezes as I wait for "Scanning Audio Plug-Ins." The program "dvaaudiovideoscan" program has opened, but nothing is happening.
-I have uninstalled and reinstalled.
-Deleted my "8.0" user folder in documents.
My iMac has run and has enough power to run Premiere Pro past and present.
I don't know what to do. I also appreciate that Adobe has no number that I can call even though I'm paying for this service.
Please help community!
Peter

Resolved. Called 1-877-722-7088.

Similar Messages

Can Waves audio plug-ins be used with Premiere Pro CC?

Hi folks,
As it says in the thread title, can Waves audio plug-ins be used with Premiere Pro CC?
Cheers!

I dont think so:
http://www.adobe.com/products/premiere/extend.displayTab4.html
http://www.waves.com/support/tech-specs/supported-hosts

UPGRADING from TIGER to LEOPARD causes audio plug ins scan WAVES PROBLEMS

I have upgraded my G5 from Tiger to Leopard and am now running 10.5.8. I am using LOGIC PRO 8 and have upgraded that to 8.0.2. When i open LOGIC PRO and it starts to scan the audio plug ins-it causes a problem that sends me to PACE-the Interlok site for my WAVES-it says this:
IMPORTANT!
If you're running Mac OS X 10.5 or above and your software keeps driving you back to this site, even after installing the latest extensions, then you need to update your software, not the extensions. Contact the publisher of the software you're trying to use regarding a 10.5 compatible update. Please don't contact PACE. Only the publisher of your software can resolve this issue.
SO-i downloaded their latest extension and i keep getting brought back to their site. My software IS updated -from 8 to 8.0.2
PLEASE HELP

You provided almost all information except the waves version. Most probably Waves are outdated.

I compiled a list of free audio plug-ins that actually work in Premiere

http://www.fallenempiredigital.com/blog/2013/03/06/enhance-your-audio-mix-in-premiere-pro- with-free-vst-audio-effect-plug-ins/
Cross posted from the Creative Cow forums, I wanted to invite others to suggest plugins they may be using (free preferred). And no, Adobe, I'm not dissing your audio effects in Premiere but they are Soviet-prison-cheese-sandwhich basic.

Thanks for the response.
We tend to not assume it'll work & blindly fire off updates. You see, when we (IT Only) upgaded to X from 9, the new 'protected mode' feature caught us off guard. We assumed we had done something wrong with the packaging and so spent a few days making sure we crossed our t's and dotted our i's before escalating to the vendors. And when we reached out they came back with a very simple "ohh yeah just check off a box", making us feel a bit foolish. I wanted to be sure there wasn't some other new measure put in place to further try to secure Reader.
As it turns out,
LexisNexis had to update their package for CaseMap 10 for Reader XI, and they have no plans to patch earlier versions.
Autonomy / Interwoven is set to release FileSite 8.5 SP3 Update 6 in Q1 which will support XI.
As you stated, vendors have to produce updates.

Audio Plug-ins for CS6.0.3 Premier Pro

I am an audio editing novice. I am interested in using the equilizer audio effect to lower some high pitched sounds and enhance some middle frequency sounds. The equilizer effect does not seem to have a tight enough bandwith for my edits. The edits overlap. Does anyone know if the Waves Q10 Native plug-in will work in PremPro. Any information is appreciated. thank you Jean

Hi Hangtime,
Thanks for the reply (I had looked on bulletsandbones,and couldn't find the link, so thankyou).
However, the 'Computer Music' magazine that I have got some plug ins from says that most of the "programs are presented as installers. You just double-click on the installer icon and the application does the rest".
Does this mean that one uses the installer first, and then follows the bulletsandbones advice (which is "Drop the Audio Units (AU) Plug-In into your Library/Audio/Plug-Ins/Components/ folder on your Mac (this is at the Root level of your hard drive)?"
Message was edited by: drutgat

Premiere pro freeze

I just left CS6 to join the CC. I've been having numerous instances of Premiere Pro freezing, with the only way to get it to run again is to force quit and restart -- many times.
Anyone having the same problems and what can I do to resolve the freezing? Thank you in advance for any help.
Cal OES Producer
The Project:
Two timelines -- one at :15 seconds, the other at :30 seconds.
many quick cuts;
several video sources but all in the same folder on the same drive;
video effects for color, contrast, etc...
some simple transitions
Audio sweetening
Problems:
I've seen PPCC stutter in timeline playback, sometimes showing video different from what the clip should be showing.
I've used Audition (parametric eq) to sweeten audio clips, launching the application from within PP.
Video Recording:
JVC shooting H.264 Quicktime 1080i 60i
GoPro Hero 3 HD
Aerial Copter (Quicktime, HD, Apple ProRes422, stabilized)
My system:
Storage:
GRaid with Thunderbolt (8TB external hard drive; MAC OS Extended)
MacBook Pro
OSX Yosemite
V 10.10
2.7 GHz Intel Core i7
16GB Memory 1600 Mhz DDR3
Intel HD Graphics 4000:
Chipset Model: Intel HD Graphics 4000
Type: GPU
Bus: Built-In
VRAM (Dynamic, Max): 1024 MB
Vendor: Intel (0x8086)
Device ID: 0x0166
Revision ID: 0x0009
gMux Version: 3.2.19 [3.2.8]
NVIDIA GeForce GT 650M:
Chipset Model: NVIDIA GeForce GT 650M
Type: GPU
Bus: PCIe
PCIe Lane Width: x8
VRAM (Total): 1024 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x0fd5
Revision ID: 0x00a2
ROM Revision: 3688
gMux Version: 3.2.19 [3.2.8]
Displays:
Thunderbolt Display:
Display Type: LCD
Resolution: 2560 x 1440
Pixel Depth: 32-Bit Color (ARGB8888)
Display Serial Number: C02KQ0G4F2GC
Main Display: Yes
Mirror: Off
Online: Yes
Rotation: Supported
Connection Type: DisplayPort

Hi,
Which Graphics Card is installed in your computer?
I would suggest this:
Premiere Pro CC, CC 2014, or 2014.1 freezing on startup or crashing while working (Mac OS X 10.9, and later)
If this doesn't help, try this:
Go to the following locations:
Location 1: When in Finder, click on Go > Go to Folder > ~/Library/Application Support/Adobe
Location 2: Go > Go to Folder > ~/Library/Preferences/Adobe
Location 3: Documents > Adobe
In all the locations, rename the 'Adobe' folders to 'OldAdobe'
Launch Premiere, accept the License Agreement and see if it works.
Note: You will lose your customized workspaces and keyboard shortcuts.
Thanks,
Rameez

Audio Plug-Ins Won't Let FCP Open

Does anybody know how to disable audio plug-ins within FCP? I have a Waves bundle for use with Pro Tools on the same computer. The Waves plugs are authorized with an iLok. If that iLok isn't present, FCP closes during launch because it can't open the waves plugs.

Nick Holmes wrote:
Move the plugs out of the FCP Plugins folder.
It's really that simple.
Sorry to resurrect this thread, but its really *not that simple*.
You see FCP will load 3rd party AU's that are in a shared folder - Library -> Audio -> Plug-Ins -> Components. If I want the AU's to show up in Soundtrack for example they have to be in that folder, but then FCP will load them as well.
I have a Powercore that I don't want to use in FCP, but want to use in Soundtrack. It causes FCP's load time to triple and it's really annoying. I've found no trace of a plug-ins folder that is just for soundtrack either.
I suppose that AudioUnit Manager will do the trick but I really did not want to install yet another app to sort this out but that seems to be the only option at this time.

Disable audio plug-ins when starting FinalCut

Because I use Logic Pro I have a lot of AU plug ins, FX and instruments... and FinalCut crash while open because it doesn't recognize some plug-ins. How can I disaeble the audio plug ins when lauching? Danks for your help

Remove all of your audio filters from their folder, and replace them one by one. Launch FCP again and again adding one each time until you find the culprit.
They can be found in Mac HD/Library/Audio/Plug-Ins/Components, and i think also User>Library>Audio>Plugins folder.
Just move them to a separate folder o your desktop util you figure out which one is troublesome.
Good luck,
Joni

Please help with nested audio plug-ins

I have built three sequences with audio mixer settings for each (compression, EQ, etc...). I nest these individually and want to organize them in a "final output" sequence. As the three sequences are placed in the "final output" sequence, all video clip references work fine, but the audio mixer settings do not follow the audio clips to the "final output" audio.
How can I get the individual sequence audio plug-ins to follow the audio to the final output audio?
I have rendered work area, rendered audio, and linked audio to video clips, still I am missing something...
thanks for your help!!!
Paul

these sequences as built
sequence A : Audio 1 (compression at 10)
sequence B : Audio 2 (compression at 15)
when nested, should become:
Master sequence: {Nested sequence A : Audio 1 (compression at 10)} , {Nested sequence B : Audio 2 (compression at 15)} .
but the compression settings do not come through at all.
Ideally, I would be able to use the audio settings from individual sequences as built, then the program would feed them (as built) to a master output just like the video clips...but for some reason voiceover compression from sequence A (which is different from sequence B) is not applying to the output of the master sequence at all...
as it exsists now, I would have to rebuild all of my audio on the master sequence because any audio mixer changes are not carrying through...
I must be missing something...
thanks,
Paul

"An error occurred while attempting to load this plug-in." I donloaded the Nik Collection, but when I try "export with preset" the only preset as an option is HDR Efex Pro 2. The other plug ins appear in my applications folder, but I get the error messa

I downloaded the Nik Collection, but when I try "export with preset" the only preset as an option is HDR Efex Pro 2. The other plug ins appear in my applications folder, but I get the error message at the start of this post...I can us, say, Silver Efex stand alone, but I want to use as a plug in...can anyone help please..?

Hi,
Follow these instructions: Accessing the plug-ins from host applications - Nik Collection Help

Audio plug ins (stillwell audio) appear even after deleted

I had some stillwell audio plug ins, they didnt ned them anymore so i deleted them, did a system search and deleted all the files that have to relate to stillwell plug ins, then went on to ableton and logic(I installed logic after the start of the iusse) and they still appeared and are still fully functional, so I went on searching for these files even deeper and couldent find them, they dont exist when i search them. so i contacted stillwell customer service and they listed how to find the files and i did all what they said and it still shows up, so now im asking the apple community, DO YOU GUYS KNOW WHATS GOING ON!!
thanks, teliik

Hello TELIIK,
It sounds like you just did a search for the plug-ins, but I found an article that tells you exactly where to look for these plug-ins:
Finding Audio Units plug-ins on your computer
http://support.apple.com/kb/HT1295
The important part of this article states:
The Apple Audio Units plug-ins are built into the operating system and do not appear as discrete files. Plug-ins from other manufacturers appear as individual components on your hard disk. They may be found in two places:
/Library/Audio/Plug-Ins/Components
~/Library/Audio/Plug-Ins/Components ("~" represents your home directory.)
The ~/Library is a hidden folder in Lion and Mountain Lion. You can find instructions for accessing it here:
OS X Mountain Lion: What is the Library folder?
http://support.apple.com/kb/PH11395
The Library folder is hidden. If you need to open it, make sure you are in the Finder, hold down the Option key, and then choose Go > Library.
I hope this helps you locate those those plug-ins!
Best,
Sheila M.

Very Long Lag at "Scanning for Plug-ins" in PS CS3

PS CS3 lags for several minutes while the splash screen displays "Scanning for Plug-ins". PS loads and seems to work properly after the 2 - 3 minutes lag, but it's annoying.
I have deleted the preferences file, the plug-ins cache file and even the entire settings file in PS. I've tried shift-ctl-alt. I've chkdsk'd my primary drive.
This is a fresh install on a new os install (winxp sp2, current updates).
Any ideas? I swapped mobos to improve performance and this is a drag.

Update: Connecting the scanners to complete driver initialization did not resolve the problem. Even rolling back my changes and removing the Nikon Scan and Epson Scan software did not resolve the slowdown at the PS plugin scan.
I noticed that the Epson software took 4 minutes to load when I ran the app (Epson Control Panel or something like that). This is really strange. I removed the scanner software but that has not resolved the problem. I do have a network HP all-in-one. (OfficeJet 7310xi). Does that have twain drivers? Nothing shows up under scannners in control panel.
This is really weird. My system has a dual-core processor and 4 gig of memory.

I am having trouble playing MFX files in Premiere Pro CC. The audio is out of synch. Is there a way to monitor the audio correctly?

I am having trouble playing MFX files in Premiere Pro CC. The audio is out of synch. Is there a way to monitor the audio correctly?
Many thanks

Chances are the pinnacle is producing .avi files or MPEFG1/2 streams - iTunes may know how to decode the audio but not the video. Download Handbrake and try running the Pinnacle files through it and adding to iTunes - use Universal format unless you have a specific device in mind.
Keep copies of the originals.
Another option might be to try to install Perian. Can't remember if the Apple MPEG2 plugin allows MPEG2 to be played in iTunes.
AC

Photoshop Elements 10 - takes over 4 minutes to load - hangs on "Scanning for plug-ins..."

Since mid-February 2014, having problems with both Photoshop Elements 10 and Photoshop CS4 extended (v 11.0.2) - both take around 4 minutes to load, when previously they loaded very quickly.
In Photoshop CS4 there is no activity on-screen for 2 minutes, then it hangs on the start up screen for another two minutes on "Scanning for plug-ins." Similar issue with Elements 10.
I am running on Windows 8.1, 64-bit. I also have Lightroom 5.4 installed.
Any help gratefully received, as this is driving me mad!

UPDATE: After having had my iPod plugged in for TWO HOURS, it has finally been detected by iTunes.

Compressor Audio plug-ins (can you add third party audio plug-ins?)

Compressor Audio plug-ins
Can you add third party audio plug-ins? Just need a simple audio compressing/mastering solution for a lot of non-technically minded producers. So trying to avoid using soundtrack.
cheers
steve

Hi B
Really sure You are looking into Your "user" folder ?
In this there is a folder with in my case "my account" eg "Bengt"
in this ther IS a library folder
and in this ther should be an iMovie folder. If not I would make one
and into this put a folder "Plug-ins" and in this put Your plug-ins.
Restart Your Mac and open iMovie and see if it found the new plug-ins.
Yours Bengt W

Premiere Pro Freezing on "Scanning Audio Plug-ins"

Similar Messages

Maybe you are looking for