Premiere pro panel grid which was working on CC7.* does not show on CC 2014

We are having a working Premiere pro CC 7.* version, which is loading our web page in an I frame to load the panel contents. But with the new Premiere pro CC 2014 the panel is not showing the webpage grids, button clicks are not working. Please help.. Thanks.

Hi,
These are the screen shots of my panel where i am listing some details in a grid,
Actually this is a web page which is loaded inside the HTML5 premiere panel page index.html using an I frame.
The web page is loading properly both in the old premiere pro cc 7.2.2 (33) and in web browsers.
But inside the new Premiere pro CC 2014 its showing all kind of problems, like this one-- Not showing the grid.
Please suggest..
Also can somebody get me the link to download the old premiere pro cc 7 versions, not the updates; Currently all the links are pointing towards the new 2014 premiere pro.
Thanks and Regards,
Anoop NR

Similar Messages

Premiere Pro CC - Latest version, eye ball unchecked but does not show videoclip under?

in my timeline, I have 2 clips, one is above the other. When I uncheck the eyeball the video below does show. Also sometimes when I scrub the video, it wont move. It just stayes on 1 frame.
clips are cineform and other is origional from canon t4i
system
core i7 920
nvidia gtx 570HD
16 gig ram
1 drive with system & programs
1 drive videoclips
1 drive just documents
1 drive just photos

Hi dnmorgan924,
Thanks for your post. Please go to the below link and update the drivers for the graphics card and then relaunch the project again to see if it works.
http://www.nvidia.com/Download/index.aspx?lang=en-us
Regards,
Vinay

I have a problem getting with family Sharing on iphone 6 . Set up was complete but it does not show purchases.

I have a problem with Family Sharing on iphone 6+ (ios 8.1). Set up was complete but it does not show purchases on my phone or my wife's. Can any help me? Worked on my iPhone 5.

Hello, kinsnite.
Thank you for visiting Apple Support Communities.
Here is an article that I would recommend going through when experiencing this issue.
If you don't see your family's shared content
http://support.apple.com/kb/TS5449
Cheers,
Jason H.

How do I see a book which has been downloaded, but does not show in Adobe Reader XI?

How do a find a ePub book in Adobe Reader XI, which has been downloaded and does not show up? janf76607913

Visit:
Adobe Digital Editions
Be well...

HT1937 I recently tried to manage my storage by upgrading my plan to a 20GB and was charged but plan does not show changed

I recently tried to manage my storage by upgrading my plan to a 20GB and was charged but plan does not show changed

i have the same problem. I recently tried to manage my storage by upgrading my plan to a 20GB and was charged but plan does not show changed. At this time does not changed my plan yet. I have the reference number of the bank for the transaction.
<Email Edited by Host>

Acrobat Pro "save as" function in the file menu does not show the current directory of the file

I have installed CC but Acrobat Pro gives me headaches.
The "save as" function in the file menu does not show the current directory of the file but something I have worked on in the past.
It forces me to navigates through my hard disk for this very straightforward thing in normal conditions. I precise: Acrobat is the only software reacting like that.
I use Windows7 professional 64bits.

I use what seems to be the latest version available on the Cloud:
To illustrate my point, I open a directory with explorer and double-click on the only PDF in there:
So here it is, open:
When I do a "Save as", it takes me to a totally different place on the disk!
Very annoying...
Thanks for your time!
JJ

Back button does not work and homepage does not show on startup

My back and forward buttons do not work anymore. they just show grey and I can not click on them.
Also my home page does not show when i start firefox.
I reinstalled firefox 4 and then went back to firefox 3.6.16 and have the same problem in both versions.
Not sure what to do anymore
I just found out that when I open a second window everything works fine in the second window, but it still does not work in the first window.
When I close both windows the same thing happens. The first window my home page does not show up and the back button does not work, but the second window works normal. Including my home page.

Yeah, I am having the same problem (with 4.0 and earlier versions). It is really frustrating to say the least. I never thought I'd say this, but I might have to go back to IE if FF is going to be this useless. I noticed that you have to right click (instead of left click like it works in the real world) on the backwards/forwards buttons, and that is no less frustrating since my mouses backwards/forwards buttons no longer work with this new asinine button set up.

Satellite Pro L300-EZ1004X - TouchPad stopped working, BIOS update does not help

I have a Satellite Pro L300-EZ1004X laptop. Few days ago TouchPad stopped working. This is not a Fn + F9 issue.
In Device Manager it looks like hidden device and has (!) on it. Re-installing Synaptics drivers, updating them, removing the device in Safe Mode - nothing works. (TouchPad did not work in Safe Mode). One of the forums mentioned BIOS update. For some strange reason the latest BIOS for this specific laptop is from 2008 (ver. 1.5). Other L300 laptops have option to update BIOS to ver. 2.20 (2010) but not mine! I tried to load it (ver. 2.20)from Windows and from boot disk without success. I installed BIOS ver. 1.5. After reboot - keyboard stop working! And TouchPad ... still dead and still appears as hidden device. Using external mouse I restarted the laptop and get into the BIOS settings. In Advanced Settings disabled TouchPad completely. KEYBOARD START WORKING IN WINDOWS!!!
Any suggestions on how to make this TouchPad to work? Or how to get newer BIOS for this Laptop?
Thank you in advance!

Sounds like it has died, you can purchase a new one from a parts supplier and pay someone to install it or if you are any good with such things you can try to do it yourself. I suggest just sticking with the external mouse.
Welcome to the Toshiba user forums.
For those of you who do not know what a user forum is, it is a community of users who volunteer time to help other users. Anyone can participate. It's 100% voluntary.
Being super active is never a requirement

Wifi was working, and now does not discover any networks

I had wifi working, and now it does recognize any of the 6 networks that everything else discovers, any sugestions?
I read all related posts, did the software update to latest version, restarted several times, and did wifi reset. Actually my statmenet above is not entirely true. It does discover the network and connects when I place the device on top of a router, but moving to 50cm away from it and the connection disconnects and there are no networks discovered. I have tried it with 2 different routers, both of them are working well with my blackberry and laptop - and this was also working with the ipad before.

Try a reset. Press & hold the Power and Home buttons together for 10+ seconds, ignoring the red power-off slider, until you see the Apple logo.
If this does not work, then restore the iPad to its factory settings and start again.

Powerbook Fell, was working fine subsequently. does not boot on power up

My PowerBook G4 fell down (about 2 feet onto carpet) and landed on its
battery side. The machine was working fine after that (did some web
browsing, etc), however there was a dent near the battery. So I
powered it off to remove the battery and straighten out the dent. When
I power back up, the machine does not go past the apple screen. I put in the OS CD but nothing happened. I tried resetting the PRAM and the PMU, no difference.
It does not let me go to either the single-user or the verbose mode. I tried to boot using the shift key and it showed the apple sign and the rotating counter thingy for a long time and nothing happened. Now I cannot even plug my install disc into the DVD player. HELP!!!

Boot in save mode -You say that works and insert your 10.4 disc into the DVD slot if it accepts it.
Now boot to the disc.
In the menu bar i think its options choose disc utility and repair the drive .
From what you have said i suspect you mechanical damage has taken place either to your HD or the DVD drive.
Both can be fixed and if you want a challenge (Like removing about 50 screws) you can do it yourself
It will save you about $150-$180 in labour alone.

The Grid Thumbnail view of my files does not show a continuous sequence of my photos. For instance if I am viewing them at the reduced size of a 3x7 grid, there are 3 columns of photos to the right that do not show. That is the grid is 3x10 but only 3x7

Below are 2 screen shots of the Grid Thumbnails. If you compare the 2nd to the first you will notice that there are several pictures showing in the second view that do not show in the first. That is they are cut off. How can I adjust the viewing so the preview shows all the photos with none being cut off?
Thanks, McGue

Purplehiddledog wrote:
I do backup with iCloud. I can't wait until the new iMac is available so that I can once again have my files in more than 1 location without needing to rely solely on the cloud.
I also rely on iTunes and my MacBook and Time Machine as well as backing up to iCloud. I know many users know have gone totally PC free, but I chose to use iCloud merely as my third backup.
I assume that the restore would result in my ability to open Pages and Numbers and fix the problem with deleting apps, but this would also mean that if my Numbers documents still exist solely within the app and are just not on iCloud for some reason that they would be gone forever. Is that right?
In a word, yes. In a little more detail.... When you restore from an iCloud backup, you must erase the device and start all over again. There is no other way to access the backup in iCloud without erasing the device. Consequently, you are starting all over again. Therefore, it would also be my assumption that Pages and Numbers will work again and that the deleting apps issues would be fixed as well.
If the documents are not in the backup, and you do not have a backup elsewhere, the documents could be gone forever.

Why are my tags not syncing for a shared email account? IE One person tags an email as "Work" but it does not show on other users Thunderbird.

Subject says it all for the most part.
A shared email account we'll call "[email protected]" is not syncing tags across other end users Thunderbird. User A will tag an email as Work but it will not sync/show on anyone else's application. I've read that Thunderbird stores tags locally now? Is there a way to sync them up to our IMAP server? Or would we have to revert to a previous version of Thunderbird (if so which)?
Any help is greatly appreciated. Thanks

the issue is probably that the server does not support tags..... Thunderbird stores them locally, but syncs them were the server supports it.

Datasource Include -- Transport works, but RSA3 does not show intended res

Hi there,
We have sent a Datasource include in transport and transport did not throw any errors. I assumed it went through fine. But when I tried to test it using RSA3, I don't see intended result. I tried re-importing the transport, again no errors with same result. I followed same procedure for QA transport and it worked fine. Right now I am trying this to Prod and I don't understand why it does'nt work. Can you guys let me know if you experienced something like this before or if you have any suggestions.
Thanks,
Mike.

Hi,
Which load is that? Is it a full load or delta load? Is it a LO data source? Please give some more inputs...
Khaja

Yepnope still works, Interactive SVG does not without it | EA 2014.1.1

Hi all,
I'm trying to create an interactive map of the US using Edge Commons interactive SVG. I've been reading that yepnope is deprecated and doesn't work in the new version of EA 2014.1.1 but it seems to still work for me and appears to be the only way I can interact with an SVG. I have added both jquery-1.11.2.min.js and EdgeCommons.SVG.js in the scripts panel but can't seem to get it to work without using the yepnope function. Can anyone help me with this? I'm running a Mac OSX 10.10.2.
Here's a link to the EA file.
Dropbox - default.zip
Thanks in advance for all your help!
Kenny

Hi all,
I'm trying to create an interactive map of the US using Edge Commons interactive SVG. I've been reading that yepnope is deprecated and doesn't work in the new version of EA 2014.1.1 but it seems to still work for me and appears to be the only way I can interact with an SVG. I have added both jquery-1.11.2.min.js and EdgeCommons.SVG.js in the scripts panel but can't seem to get it to work without using the yepnope function. Can anyone help me with this? I'm running a Mac OSX 10.10.2.
Here's a link to the EA file.
Dropbox - default.zip
Thanks in advance for all your help!
Kenny

HT5569 I have a ipod touch and it has updated the device and is asking me to join a net work and it does not show any net works and ony has other but i dont know any networks so what do \i do

I have a Ipod touch and am un sure how to connect to wi fi it is asking me to connect to other but I dont know any so what do I put in there
cheers

Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Premiere pro panel grid which was working on CC7.* does not show on CC 2014

Similar Messages

Maybe you are looking for