Premiere Pro problem, it doesn't export my project,shows no error

Hello everyone, I've been working on a short film for a while and now that it's finished I want to export it. The only problem is, that I can't! The export freezez at 10% sometimes 20% without showing any sign of error or anything. Is there any way to track the source of this freezing? I've done the rendering of the project from the work area and it's all fine, but when I export,it bugs on me. Any help please? I've been working with adobe dynamic link, also using some effects from after effects. Is there any kind of verification that I can do in order to find the problem?
Thanks!

More information needed for someone to help... click these links and provided the requested information
-http://forums.adobe.com/message/4200840
-http://forums.adobe.com/thread/416679
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
For Mac http://mediainspector.massanti.com/
http://blogs.adobe.com/premiereprotraining/2011/02/red-yellow-and-green-render-bars.html
If you have a red line over the timeline after importing a video and before adding any effects... your project is wrong for your video... read above about codecs
Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project
The easy way to insure that your video and your project match
See 2nd post for picture of NEW ITEM process http://forums.adobe.com/thread/872666

Similar Messages

I work with Premiere Pro on a mac and export quicktime movies to be played on pc's or mac's

I work with Premiere Pro on a mac and export quicktime movies to be played on pc's or mac's. When I export a qt from Premiere with audio it will not play on a pc only a mac. After extensive research I have narrowed down the problem to this: if you use the inspector in quicktime it looks like this
DV, 720 x 480 (640 x 480), Millions
16-bit Integer (Little Endian), Stereo (L R), 48.000 kHz
I have to run it thru AE to make it look like this....then it plays
DV, 720 x 480 (640 x 480), Millions
16-bit Integer (Big Endian), Stereo, 48.000 kHz
SOOOO the problem is the Little/Big Endian. I googled that and it looks like a file/bit structure....anyone know how/why to change it in Premiere? Because everytime I make a movie in Prem I have to drag the sequence into AE and render it there so the sounds works.....
thanks

Two questions:
1. What CODEC are you choosing when exporting on the Mac?
2. Do you have any Blackmagic hardware/software installed?
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

.aaf import from pro tools to Premiere Pro CC 2014 doesn't include or unpack any media?

Hey
I'm trying to import my mix from ta new audio engineer, and he uses .aaf files.
I can import the aaf he's sending in to the project okay. It unpacks as a sequence plus a folder named "Clips" with all the filenames, but it's all offline and there's no media files to link to..
The .aaf is 270 megs and this is a stereo mix, and a 5.1 mix for a 2 minute short, so I know the file includes the 15 or so total minutes of audio media.
Does anyone know the solution to this? I've scoured the web and can't see anyone else with this issue.
(I'm new to Premiere from the AVID and FCP worlds, and I'm surprised there's no import dialog or settings where I tell it to include the media when importing and where to put it.)
(OSX 10.9.3, Premiere Pro 2014.0 release.)

Just stumbled across this,
https://forums.adobe.com/message/4658006
Pretty much sums it up. Premiere Pro CC 2014 doesn't seem to support embedded aaf's.

Premiere Pro CS3 - Advice on file export size?

I recorded a 2 hour TV documentary onto a DVD-RW, and I ripped it using Any Video Converter. The ripped file is a 720x540 Xvid AVI, and it is 1.6GB. I then edited the programme down to 20 minutes in Adobe Premiere Pro CS3. I then exported the 20 minute video to AVI, video compression MC_DVD, and the file is 4GB in size. Obviously it makes no sense that the 2hr video should be 1.6GB and the 20-minute video should be 4GB. Is there a way I can export this video (either using the Export option, or the Adobe Media Encoder, I don't mind which) to a reasonable file size, without losing video quality? Unfortunately the picture quality of the united rip isn't brilliant anyway, so I really don't want to lose any more picture quality, but there has to be a reasonable size that I can get the video down to.

It's actually not legal for you to be doing this, so it would be unethical for anyone here to help you do it.

Premiere Pro CC crash on launch, crash opening project, update issues

Hi,
iMac 2011 quad i7 3.4 GHz, 20GB RAM, MacOS 10.9.2 and 10.7.5, Premiere CC 7.0.0 & 7.2.1
I've been having a crazy time with Premiere CC. I started an Africa documentary 2 weeks ago, which forced me to upgrade to CC (on MacOS 10.9.2). Other than some issues with the Creative Cloud installer app (which seems like a great idea but never seems to work as it should, especially with updates), I was happily working away for about 10 days.
During that time I had to install Premiere CS6 again to open another project -- and continued happily working.
Then I needed to export some markers... and discovered that the Creative Cloud app wasn't reporting any updates beyond 7.0.0, and I needed 7.2.1 to export markers. That's when my problems started.
I tried to update to 7.2.1 with the Creative Cloud app -- it wouldn't see the update.
I tried to download the 7.2 and 7.2.1 patches from Adobe's site directly -- neither of these would install, because they said I didn't have the right software (or something like that -- didn't write down the error).
Finally I used the Adobe Cleaner tool to uninstall and clean all Adobe apps off my system. Then I was able to use the CC app to download 7.0.0, and my patches to update to 7.2.1.
I tried to open my project... Premiere crashed as it opened the project (as it was loading the clips).
I uninstalled all 3rd party effects, checking to ensure nothing was in the MediaCore folder. I deleted all caches and previews. I checked the permissions of the Adobe preferences folder, and trashed the Premiere preferences. I rebuilt permissions.
Now, not only could I not open the project, but Premiere itself would not launch -- it would freeze to the point of forcing a reboot.
Cleaned Adobe apps again, went online with Adobe tech support for a full hour. The main thing they did was remove a CUDA extension, but after reinstalling, the problem persisted... at first it crashed while loading the project, and then crashed in the launch itself.
Luckily, I had a backup of MacOS 10.7.5, which I had been using before starting this documentary project. I went back to that backup, installed Premiere 7.2.1... and now Premiere launches properly but still crashes about halfway through loading my project.
I can load the project if the clips are offline (temporarily renaming the footage folder), so it seems that somewhere along this zany process, one or more clips got corrupted.
With 15,000 clips of different formats in this project, finding which clip(s) is corrupted is like finding a needle in a haystack. For now, I am importing my sequences into a new project, and just importing the clips I need to finish my edit at hand. Then I will likely have to build a new project from scratch -- a long process, since Premiere can't import nests of subfolders like After Effects and Final Cut Pro can, and that's how the footage from this project has been organized.
Arg! At this point I have a workaround (at least in MacOS 10.7.5), so I'm not really asking anything, but if anyone has light to shed I'm all ears.
P.S. I think when I installed CS6 after installing CC, it confused the CC app. I don't think that caused my Premiere issues, but I think it may have contributed to the issues installing updates, and the CC app getting confused.

Hello GrayJones,
This does seem like some pretty unusual behaviour! And I can only imagine the frustration it must be causing (believe me, I've been there!)
I've seen a lot of crash issues that are related to computer's graphic cards. You may want to try updating your graphics card's driver before proceeding forward. Also, there are a very small number of graphics cards that just don't work well with Premiere. You can also check the settings of your Mercury Playback Engine GPU. This can impact the performance of your software, especially depending on your graphics card. I may have missed it above, but didn't see anything related to Graphics cards in what you tried.
If you update your graphics card's drivers, and then update your version of Premiere Pro, it may solve the crashing on launch issue that you were having. Moving forward with fully updated PP software would be my first course of action, if it's possible.
Although I see that you have tried it alreay, you might want to reset your preferences (hold Cmd and Shift on the Mac while opening the program until you hit the splash screen) and resetting your PP cache (Premiere Pro - Preferences - Media - Click on "Clean Media Cache Database"
Without seeing the errors that caused your updates to not install originally I can't really offer suggestions regarding that. It could be a system conflict somewhere on your computer, but there are dozens of possibilities of what could be causing, especially if you have other plugins, older versions of Adobe or other video softwares, that kind of thing...
Moving forward from there:
How are you working? Are your images stored on an external hard drive or locally? How are you connecting the hard drive to your machine? Are you tossing all of the clips with different time code into one sequence and working from there, or editing on separate sequences?
As for your project: Do you have the ability to test it on a different machine? You can try doing a project manager (File-Project Manager) and putting your entire managed project onto a different machine to see the behaviour, that way you can figure out if the issues are related to the project itself, or to your install of Premiere Pro on your machine. IF the project works fine on another system, then clearly the issue is related to your software/hardware configuration, if you have the same issues with the project on every machine, then it might be something different. Can you test other projects on your current set-up? Is this the only project that is affected?
If you have one or several corrupted files I know it can be painstaking to try to locate where the damage is at, generally it's a process of elimination, make a sequence with files from one camera and see what happens, if it glitches, try another camera until you can see if it's a general issue to all of your cameras or specific to some. Narrow it down from there, if it's multiple cameras, then the error (again) is software/hardware or transfer related or occurs in your transfer/storage process, or may be related to your uninstalls/re-installs with CC and CS6 (although I don't think I've ever seen that!)
If it's only clips from one camera (you mention the Canon XF100 has problems) maybe something affected your camera. I once saw standing too close to a radar-dish corrupt 1/4 of the clips from a BBC videographer's camera. I have no explanation why... but it can happen, so if only one camera is affected you should consider the possibility.
I'll try to assist with this as much as I can! But remember that the forums are not here for Adobe personnel to provide support to clients, but as a community for Adobe-philes to share and help. A lot of Adobe staff who are posting on here are generally doing it because they've got a bit of free time and want to help out. You should consider contacting support again if you can't resolve the problem and getting them to connect you to a video specific team.
Cheers!
J

Want to try trial for Premiere Pro but for some reason the apps tab says "download error please contact customer support"

Want to try trial for Premiere Pro but for some reason the apps tab says "download error please contact customer support"

Kbubello for information on how to resolve download errors please see Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html.

In Premiere Pro, is it possible to change the project aspect ratio once started?

In Premiere Pro, is it possible to change the project aspect ratio once started?

On a side note, 'projects' do not have as aspect ratio, sequences and footage do. And a project can contain any number of sequences or footage.

I have downloaded Premiere Pro on one desktop, but it will no show up in my apps to download it to my laptop

I have downloaded Premiere Pro on one desktop, but it will no show up in my apps to download it to my laptop, any solutions?

Hi Kristialana,
The only scenario where in Premier pro wont show is when you have a 32 bit OS. Min system requirement for Premier Pro is a 64 bit OS .
System requirements | Adobe Premiere Pro
Cheers,
Kartikay Sharma

Motion 5. I have a Mac Book Pro and am trying to export my project, but cannot as the SHARE options are all faded out.

I have a Mac Book Pro and am trying to export my project, but cannot as the SHARE options are all faded out. All I am doing is adding text to a movie. It plays back fine in motion.

Hey Adam. Try this link and see if any of the suggestions help: https://discussions.apple.com/thread/5216906?tstart=30

TS3694 I am having problem with my iphone 3g update, its showing 1015 error. someone please help me out. Thanks

I am having problem with my iphone 3g update, its showing 1015 error. someone please help me out. Thanks

nomibutt wrote:
... its showing 1015 error.
Unauthorized modification of iOS
http://support.apple.com/kb/HT3743
ERROR 1015...
This Error Code is indicative of the Device being jailbroken / Hacked...
Sorry... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
You will need to look elsewhere.

After effects CC export to premiere pro CC: audio doesn't match

Hello!
I am making an animation serie for Belgian TV. They need me to export only my audio from premiere (I make the animations in after effects).
They need OMF format.
When I export from after effects CC > Premiere pro project (only to export my audio to OMF from here) the audio doesn't match.
Adobe media encoder doesn' support OMF unfortunately.
Example; if I stretch the audio time in after effects, premiere doesn't.
I am really stressing out and any help would be very welcome
Thank you!
Ellen

Hello Jim
Thanks for the reply!
When I import my after effects composition into premiere, it is perfectly visible and the audio is correct.
But now it is suddenly impossible to select > export > OMF
Do you know why this is?
Thanks!

Premiere Pro/Media Encoder fail when exporting something with AE linked?

Hey all, I do some video production work for a university, and we're running into some problems when trying to export all the videos from a particularly large course. We haven't run into this issue before so I'm hoping someone might have knowledge of it and can help me out.
Here's some background-
I'm trying to export videos, about 20 minutes each. Each video has an opening sequence and closing sequence that were created in After Effects and are Dynamic linked in the right spots on the timeline.
We're encoding with Vimeo HD 720p 29.97 settings.
Media Encoder gets through one pass seemingly just fine, and then a little after halfway through encoding it stops (doesn't crash, just stops encoding any further) and crashes when attempting to stop the queue.
It's a pain to export from After Effects and re drag in all the sequences, so our workflow keeps all exporting Premiere -> Media Encoder.
EDIT: Can't believe I forgot to mention this- works fine exporting directly from a timeline in Premiere, it's only when Media Encoder is used that issues arise- but it's unfeasible to export 30 videos from the timeline.
EDIT: Done some more testing over the course of the day. I can add After Effects files to a AME queue and encode them with the Vimeo settings and it makes it through both passes, correctly exporting the videos. It just doesn't work when those same compositions are exported as linked compositions in a Premiere Pro timeline.
Some things I've tried with no success:
Exporting the After Effects files separately does not work, it hangs even if only exporting the after effects segments.(20 seconds each).
I've turned off CUDA and done software only, still hangs.
I've tried dragging/adding from Media Encoder/any number of different workflows to get the sequences from Premiere to After Effects.
I've tried exporting with different settings: (e.g. non Vimeo HD 720p 29.97), still hangs (doesn't even start encoding, doesn't get halfway).
Any ideas?

I experienced this at one point. Searching the WEB I saw suggestions that there was a problem with a recent version of Quicktime. (I have no idea why the quicktime player would have an impact.) However, reverting to an earlier version of Quicktime fixed the problem. Search this board using quicktime as a search phase. The quicktime web site allows you to download the earlier versions. I'm not at my editing machine, but I believe that I am at version 7.5.2.

Premiere Pro CC 2014 hangs on export

I opened a project that worked on the previous version and everything played fine in the 2014 update, rendering previews and smooth playback with no problems. When I go to export it hangs. The sequence is full of ProRes 4444 footage with the sequence settings and previews set to the same codec. I'm trying to export a ProRes 4444 master file.
What I've tried :
- Switching between CPU and GPU rendering
- Render previews and having "match sequence settings" and "use previews" checked
- Render directly without using previews
One thing to note is opening the same project in Premiere Pro CC ( not 2014 ) with the same settings exports without any problems. Glad I didn't uninstall.
System Specs :

I'm now getting inconsistent behavior. Exporting in-process is very slow, with a normally 1-2 min export taking 30min - 2 hours for both GPU and Software modes.
I tried unchecking Import Sequences Natively in AME and it stalled out using OpenCL. Tried again in AME with Software Only and it worked normally. Just for fun I tried again in AME with OpenCL and it worked. To test further I enabled Import Sequences Natively again in AME and it works normally for both GPU and Software Only modes. Going back to exporting in-process still doesn't work.
The original CC ( non 2014 ) release never had this problem, and CC 2014 didn't have this problem until the latest update. While this is still pretty broken, at least I can get an export if the stars align through AME.

Premiere Pro CC taking FOREVER to export

I'm on a mac (2013 imac and macbook pro, 24GB/16GB ram, etc) and Premiere Pro used to export just fine (~10 minutes for 3 minute 1080p video to h.264, everything pre-rendered) and now on both of my machines it seems like PP isn't able to use the rendered files EVEN when I select "use previews" because it takes 30-40 minutes to export now. As an aside, I have to render essentially every second of my timeline due to the nature of the footage & effects I'm using - my footage is image sequences of jpgs that are a weird size, the timeline is 1920x1080 though. Media Encoder isn't any faster, either. It doesn't matter whether I use software or CUDA accelerated export, either. They are all slow.
I'm getting no direct indication that there's an error - just that PP takes far too long to export. Unacceptably long. Rendering times are fine, so there's not a problem with my system there.
Thanks,
Henry

minutephysics wrote:
I'm on a mac (2013 imac and macbook pro, 24GB/16GB ram, etc) and Premiere Pro used to export just fine (~10 minutes for 3 minute 1080p video to h.264, everything pre-rendered) and now on both of my machines it seems like PP isn't able to use the rendered files EVEN when I select "use previews" because it takes 30-40 minutes to export now.
Hi minutephysics,
What is the codec for your rendered previews? What is your output codec? Are they the same?
minutephysics wrote:
As an aside, I have to render essentially every second of my timeline due to the nature of the footage & effects I'm using - my footage is image sequences of jpgs that are a weird size, the timeline is 1920x1080 though. Media Encoder isn't any faster, either. It doesn't matter whether I use software or CUDA accelerated export, either. They are all slow.
I'm getting no direct indication that there's an error - just that PP takes far too long to export. Unacceptably long. Rendering times are fine, so there's not a problem with my system there.
Which effects are you using? Any effects with a lot of overhead like Neat? Can you post a screenshot of your export settings dialog box?
Thanks,
Kevin

Adobe premiere pro cc crashes when i export to dvd

hi all
i recently bought mac pro and shifted to adobe premiere cc from fcp 7. i am editing a fairly complicated documentary project where i have to deal various footage like mxf, m2ts, mts, mp4, mov etc. these are the footage my director got from different assigned person. those people used various type of camera like sony fs100 & z7, p1(hdv), panasonic 102aen and 250, canon dslr mark 2, 3 and etc. i know they use various type of compression. i have also some archival footage from vhs which is converted to mpeg.
i have a blackmagic ultra studio 4k card. so i'm dumping all the footage into sequences where setting is 1920*1080p with blackmagic 8 bit yuv compression. i primarily logged all the footage without any problem. but recently while i was exporting all the footage on dvds, my premiere cc repeatedly crashing. i should mention that i don't have adobe media encoder cc.
it is a huge project with almost 4 tb footage. it was running so smoothly so far. but i don't know what's gone wrong 3/4 days back my project also crashed. anyway i recovered that project but can't not export anything from it. note that i exported lots of footage as dvd before.
can any one give suggestion what should be my best sequence setting and why it's crashing? my final target of output is 1920*1080p. thanks in advance.
anam
[email protected]

>and encore i don't have
CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 will help
The bottom section of the link above has several Adobe links, and other information, on downloading Premiere Pro CS6 and the bundled Encore CS6, and the TWO ADDED downloads for the Encore library content, to author a DVD or BluRay... and the tutorial list includes learning how to use Encore... pay particular attention to the picture in reply 3 at this link - https://forums.adobe.com/thread/1516173 (picture first posted by Ann Bens and reposted by Stan Jones)

Premiere Pro problem, it doesn't export my project,shows no error

Similar Messages

Maybe you are looking for