Premiere Pro Project Very Slow To Load....Why?
Hello All
Really hope that someone can suggest a reason as to why I may be experiencing this problem. Firstly, heres the problem:
Problem: I open a Premiere Project and it opens up. The bar at the bottom reports that all media is loaded, however my thumbnails are very slow to populate and then be hover scrubbable (new verb!). Not only that the timeline thumbnails take ages to update and are not available for me to begin scrubbing through right away. Very frustrating.
Here's some facts:
System Hardware:
2013 Mac Pro; 3Ghz 8 Core Model; 32 GB RAM; Dual D700s 6GB
SSD - Mac Standard 512GB as boot drive and for applications
Edit Drive - Thunderbolt connected LaCie 2Big 4TB Drive x 2 (these are daisy chained via thunderbolt too and striped together in a RAID for maximum throughput) Speeds are generally in excess of 500Mbps read and write
System Software and Information:
OS X Yosemite 10.10
Premiere Pro Project stored on Edit Drive with all media for that project
Cache Files stored on same drive as Project (Edit Drive)
Project Size = 48.7MB
Does anyone have any suggestions as to why this problem is occurring? Previously had problems with the MacPro/GPU Mavericks 10.9.3 issue that everyone had been reporting but seems to have gone away now and after some other troubleshooting like resetting preferences and PRAM; running Safe Boot Disk Permission Repair (as recommended by Larry Jordan).
Really appreciate any help and this is a really annoying issue and is affecting our workflow hugely.
Cheers
Hm, if the issue occurs with two different host systems, then i would rather think that there are maybe issues with the network. Are you aware of any changes/updates done by IT? Security patches, changes of software on router, ....
What you maybe can try is to isolate one of the host and connect one of the PXI using a cross cable directly to this host. Does the issue occur there again(still)?
You can format/reinstall one of the PXIs to do a cross check with one system with original state, the other with newly installed state.
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.
Similar Messages
-
Importing and exporting from cc premiere pro is very slow
importing and exporting from cc premiere pro is very slow, the system has i7 processor and memory is 64 gb and has internal raid storage. what could be the issue.
If you would like to test the tuning and setup of your Premiere installation go to our Premiere Pro BenchMark PPBM, the Instructions page has the download file. This single download can test Premiere 6, 7 or 8 with the identical benchmark. We maybe able to tell you why you are having problems.
-
My macbook pro is VERY slow to load especially items on desk top. What can I do?
my macbook pro is very slow to load especially items on desk top. What can I do?
Hi i,
Try running Verify Disk, and if HD needs repair, run Repair Disk:
http://support.apple.com/kb/TS1417
http://support.apple.com/kb/HT1782 -
Premiere Pro being very slow while previewing
So recently my friend sent me a png sequence with a alpha channel. And what I want to do with it is put it in Adobe Premiere with my YouTube videos I will edit it with.
But the problem was when I imported it as a png sequence in premiere and previewed the project, it stopped and started and acted very "laggy." I don't know why it is laggy because a png sequence is not a huge file.
IF anyone can help me on how to preview it without lag that would be amazing And is there such thing as a h.264 with an alpha channel?
P.S: I did try converting the sequence into a QuickTime movie with a alpha channel. All it did was make it even more slow when previewing in premiere.Hi raffaele mariotti,
Please mention some more information mentioned below.
1. Have you taken any backup through time machine for your user profile?
2. What are the media files that you are using in Premiere Pro CC 2014 ?
Regards,
Vinay -
Premiere Pro CC very slow on brand new iMac
Hi
We have bought a new iMac, set up the Creative Cloud and downloaded Premiere Pro.
We've started a few new projects on this machine and whenever we play them back, the video always freezes on a frame whilst the audio carries on playing. When pausing the playback for the visual to catch up, Premiere takes a while to respond to the pause action.
We've tried changing the video renderer to Open CL, CUDA and Software only and still no luck.
The computer specs are:
Mac OS X Yosemite 10.10.1
3.5 GHz Intel Core i7
16GB 1600 MHz DDR3
NVIDIA GeForce GTX 780M 4096MB
Premiere Pro CC 8.2.0
Any suggestions are more than welcome and I will respond with the results.
If you require anymore information then please ask and I will be happy to supply you with the details.
Thank you for your time and help in advance.Jim Curtis wrote:
Thanks, Jason, that's what I was wondering about. Generally, people post to forums when they have problems.
Yep. That's usually what happens. My review will be centered around my usual "benchmark" of editing 2 AVCHD inputs, one PiP'd into the other, synced with an external audio source, and then exported to an h.264 MP4. CC on my current Mac Pro (modified dual 3.46Ghz Xeon, 48G, nVidia GTX570) takes that task about 1/2t, if t = length of video. Which is pretty damned good. I'm hoping the dual GPUs will help scale that export task down a bit more. I don't expect it to hit 1/4t, but.. hey, maybe I'll be surprised?
I make about 60% of my living from Pr, and the rest from Ae and other apps (mostly Adobe).
Given the lack of CUDA, at the moment, I don't expect the new Mac Pro to be a stellar performer with Ae specifically. I assume that Adobe is working on OpenCL'ing Ae as much as they possibly can. But from what I understand, it ain't there yet.
(I'd need a TB monitor and PCI extender, too).
I can understand the need for the PCI extender, but why the TB monitor? I'd in no way even remotely consider one of those, just given how ridiculously priced they are. There's no need for one. Does your display have a DP input? You're all set. No? It has HDMI instead? Still all set. It's dual-linked DVI that becomes problematic. -
My MacBook Pro is VERY SLOW... why?
A few months ago, I purchased a Macbook Pro. It has a 250 GB HD with 80 GB Free, 2.4 ghz, and 4 GB RAM. It is very slow... when comparing side by side with my old Powerbook, the old one wins.
I ran a Hardware Test and everything passes.
Any ideas?first, check to see if any funky programs are running in the background with Activity Monitor (Go>Utilities>activity monitor). make sure that you look at ALL PROCESSES. If nothing is strange there, then try some routine maintenance.
Run permissions repair (Go>utilities>disk repair). Try your speed test again. If it still is inadequate (and your machine should BLAZE!) try booting from the startup dvd and running permissions repair and repair HD.
Good luck! -
Macbook Pro running VERY slow since Yosemite, why?
Ever since I installed Yosemite my Macbook Pro 2010 has been extremely laggy and slow. It's especially noticeable with several applications running but even without, it is very slow to respond to commands.
What's the problem and how do I fix it?
ThanksHere are a few lines from the log messages, I double clicked on a music file which launches iTunes, the problem was at its worst while doing this:
20/11/2014 2:25:23.799 am discoveryd[54]: Basic DNSResolver UDNS Send(): UDP Sendto() failed to DNSNameServer 10.1.1.1 Port 53 errno 50, fd 69, ErrLogCount 13 ResolverIntf:5
20/11/2014 2:26:09.000 am kernel[0]: AirPort_Brcm43xx::powerChange: System Wake - Full Wake/ Dark Wake / Maintenance wake
20/11/2014 2:26:09.000 am kernel[0]: Previous sleep cause: 5
20/11/2014 2:26:09.076 am discoveryd[54]: Basic DNSResolver UDNS Send(): UDP Sendto() failed to DNSNameServer 10.1.1.1 Port 53 errno 50, fd 40, ErrLogCount 14 ResolverIntf:5
20/11/2014 2:26:09.000 am kernel[0]: wlEvent: en1 en1 Link DOWN virtIf = 0
20/11/2014 2:26:09.000 am kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
20/11/2014 2:26:09.000 am kernel[0]: en1::IO80211Interface::postMessage bssid changed
20/11/2014 2:26:09.196 am discoveryd[54]: Basic Bonjour,Warn Warning: IPv4 listener multicast send failed en1, 50
20/11/2014 2:26:09.196 am discoveryd[54]: Basic Bonjour,Warn Warning: IPv6 listener multicast send failed en1, 50
20/11/2014 2:26:09.197 am sharingd[264]: 02:26:09.196 : SDStatusMonitor::kStatusWirelessPowerChanged
20/11/2014 2:26:09.205 am discoveryd[54]: Basic DNSResolver UDNS Send(): UDP Sendto() failed to DNSNameServer 10.1.1.1 Port 53 errno 49, fd 42, ErrLogCount 15 ResolverIntf:5
20/11/2014 2:26:09.205 am discoveryd[54]: Basic DNSResolver UDNS Send(): UDP Sendto() failed to DNSNameServer 10.1.1.1 Port 53 errno 49, fd 40, ErrLogCount 16 ResolverIntf:5
20/11/2014 2:26:09.206 am discoveryd[54]: Basic DNSResolver UDNS Send(): UDP Sendto() failed to DNSNameServer 10.1.1.1 Port 53 errno 49, fd 40, ErrLogCount 17 ResolverIntf:5
20/11/2014 2:26:09.206 am discoveryd[54]: Basic DNSResolver UDNS Send(): UDP Sendto() failed to DNSNameServer 10.1.1.1 Port 53 errno 49, fd 40, ErrLogCount 18 ResolverIntf:5
20/11/2014 2:26:09.207 am discoveryd[54]: Basic DNSResolver UDNS Send(): UDP Sendto() failed to DNSNameServer 10.1.1.1 Port 53 errno 49, fd 40, ErrLogCount 19 ResolverIntf:5
20/11/2014 2:26:09.208 am discoveryd[54]: Basic DNSResolver UDNS Send(): UDP Sendto() failed to DNSNameServer 10.1.1.1 Port 53 errno 49, fd 40, ErrLogCount 20 ResolverIntf:5
20/11/2014 2:26:09.208 am discoveryd[54]: Basic DNSResolver UDNS Send(): UDP Sendto() failed to DNSNameServer 10.1.1.1 Port 53 errno 51, fd 40, ErrLogCount 21 ResolverIntf:5
20/11/2014 2:26:09.210 am configd[30]: network changed: v4(en1-:10.1.1.3) DNS- Proxy-
20/11/2014 2:26:09.210 am UserEventAgent[21]: Captive: CNPluginHandler en1: Inactive
20/11/2014 2:26:09.212 am discoveryd[54]: Basic Warn DD_Warn: Corrupt NSEC RDATA size
20/11/2014 2:26:09.212 am discoveryd[54]: Basic WABServer NetResolverEvent no resolvers, resetting domains
20/11/2014 2:26:09.213 am networkd[162]: +[NETLedBelly stopFastFail] Clearing ledbelly failure cache
20/11/2014 2:26:09.219 am discoveryd[54]: Basic Bonjour Failed to delete registration recordId=309 error=4
20/11/2014 2:26:09.466 am com.apple.iCloudHelper[2560]: objc[2560]: Class FALogging is implemented in both /System/Library/PrivateFrameworks/FamilyCircle.framework/Versions/A/FamilyCircl e and /System/Library/PrivateFrameworks/FamilyNotification.framework/Versions/A/Famil yNotification. One of the two will be used. Which one is undefined.
20/11/2014 2:26:09.478 am com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
20/11/2014 2:26:09.499 am discoveryd[54]: Basic Bonjour,Warn Warning: IPv6 listener multicast send failed en1, 49
20/11/2014 2:26:09.499 am discoveryd[54]: Basic Bonjour,Warn Warning: IPv6 listener multicast send failed en1, 49
20/11/2014 2:26:09.569 am sharingd[264]: 02:26:09.568 : SDStatusMonitor::kStatusWirelessPowerChanged
20/11/2014 2:26:09.583 am sharingd[264]: 02:26:09.582 : SDStatusMonitor::kStatusWirelessPowerChanged
20/11/2014 2:26:09.000 am kernel[0]: MacAuthEvent en1 Auth result for: 78:a0:51:4d:ed:5c MAC AUTH succeeded
20/11/2014 2:26:09.000 am kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0
20/11/2014 2:26:09.000 am kernel[0]: AirPort: Link Up on en1
20/11/2014 2:26:09.000 am kernel[0]: en1: BSSID changed to 78:a0:51:4d:ed:5c
20/11/2014 2:26:09.000 am kernel[0]: en1::IO80211Interface::postMessage bssid changed
20/11/2014 2:26:09.000 am kernel[0]: AirPort: RSN handshake complete on en1
20/11/2014 2:26:11.515 am networkd[162]: +[NETLedBelly stopFastFail] Clearing ledbelly failure cache
20/11/2014 2:26:11.515 am UserEventAgent[21]: Captive: [CNInfoNetworkActive:1709] en1: SSID 'Leon Head' making interface primary (cache indicates network not captive)
20/11/2014 2:26:11.516 am configd[30]: network changed: DNS* Proxy
20/11/2014 2:26:11.516 am UserEventAgent[21]: Captive: CNPluginHandler en1: Evaluating
20/11/2014 2:26:11.518 am UserEventAgent[21]: Captive: en1: Not probing 'Leon Head' (cache indicates not captive)
20/11/2014 2:26:11.518 am UserEventAgent[21]: Captive: CNPluginHandler en1: Authenticated
20/11/2014 2:26:11.526 am configd[30]: network changed: v4(en1!:10.1.1.3) DNS+ Proxy+ SMB
20/11/2014 2:26:11.000 am kernel[0]: en1: BSSID changed to 78:a0:51:4d:ed:5c
20/11/2014 2:26:11.551 am sharingd[264]: 02:26:11.550 : SDStatusMonitor::kStatusWirelessPowerChanged
20/11/2014 2:26:11.556 am networkd[162]: +[NETLedBelly stopFastFail] Clearing ledbelly failure cache
20/11/2014 2:26:11.568 am discoveryd[54]: Basic Bonjour Failed to delete registration recordId=317 error=4
20/11/2014 2:26:16.344 am ntpd[157]: wake time set -0.274607 s
20/11/2014 2:26:32.000 am kernel[0]: MacAuthEvent en1 Auth result for: 78:a0:51:4d:ed:5c MAC AUTH succeeded
20/11/2014 2:26:32.000 am kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0
20/11/2014 2:26:32.000 am kernel[0]: AirPort: RSN handshake complete on en1
20/11/2014 2:26:32.000 am kernel[0]: wl0: Roamed or switched channel, reason #8, bssid 78:a0:51:4d:ed:5c -
Premiere Pro CC2014 VERY slow, unusable on New MacPro
just update to the new 8.0, compared to the 7.2.2 version, the new version is sluggish.
tried a restart, but nothing changes.
tried both with GPU enabled, and CPU only.
anyone has the same problem?
nMP, D700, 32gb, 10.9.3Hi raffaele mariotti,
Please mention some more information mentioned below.
1. Have you taken any backup through time machine for your user profile?
2. What are the media files that you are using in Premiere Pro CC 2014 ?
Regards,
Vinay -
Multicam editing in Premiere Pro CC very slow after latest update.
So I installed the latest update for Premiere Pro CC a couple of days ago and now every edit I make in my Multicam sequence takes about 10 seconds to take effect. No matter how small an edit I make. While it´s taking affect the computer just freezes.
Is it possible to downgrade or does someone have a sollution?@Devinclk: You specify that you're on 7.2. If that's accurate, then please update to 7.2.2. Among the many bugs fixed were several involving multicam.
@Mediatek: first off, as a CC subscriber you most certainly do have access to the CS6 version of PPro. On this download page, use the drop-down under "In This Version" midway down the left side of the page to select CS6, then click "Download." As to the problems you're having with CC, if you start a new thread and provide as much detail as possible, there's a good chance someone around here will be able to help troubleshoot it. Remember, while you're choosing to emphasize that you're "another struggling CC user," tens of thousands of customers are using the program without such problems. So there's a particular issue--or confluence of issues--causing particular problems in your case. The first step to resolving the problems is for you to share specific & thorough enough information for someone to help. -
Hi, I am using LabView 8.6.1 to create a program that communicates to two Real time PXI units. I created a project and added the PXI targets no worries. Now when I load the project it takes up to 5 minutes to load. Any ideas why it is taking so long? There isnt even any VIs in the project yet. Cheers
Solved!
Go to Solution.Hm, if the issue occurs with two different host systems, then i would rather think that there are maybe issues with the network. Are you aware of any changes/updates done by IT? Security patches, changes of software on router, ....
What you maybe can try is to isolate one of the host and connect one of the PXI using a cross cable directly to this host. Does the issue occur there again(still)?
You can format/reinstall one of the PXIs to do a cross check with one system with original state, the other with newly installed state.
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it. -
Web pages are very slow to load airport is fine and other users do not have any problems
my macbook pro is very slow to load web pages airport is running fine and other users do not have any issues?
Likely a corrupted cache, do #12 and #13 here, if that doesn't work run through the Steps 1+
Step by Step to fix your Mac
Why is my computer slow? -
Premiere Pro CC locking up and very slow to load bigger projects
I am having a problem with premirepro cc locking up and very slow to load bigger projects.
Windows 8 machineI am having the EXACT same issue and now we are WAY behind deadlines. We have Adobe for Teams on 3 computers, all are HPZ820, Dual Proc with Intel(R) Xeon(R) CPU E5-2650 @ 2.00GHz, 32 GB RAM, Dual Video Cards Quadro 6000 4GB, Windows 7 64 bit with all the latest patches. Everything worked on the first release of 2014 but last week there was an "update" to Premiere. Since this update, projects work for a short period. When you start a new project and add footage, you can scrub the footage and play the footage with no issue. But the more assets you add, simple Titles, it slowly starts to fail. Playing the timeline starts and stops and then finally the end result is you can't even play the timeline. The Program window is frozen. I have even tested starting a new project, adding assets one by one but no matter what, I get the same results.
-
Why doesn't my MacBook finish connecting to the ISP? It is very slow to load graphics if it does connect. This happens with ethernet or wifi.
Timothy ..
Contanct your ISP for support but keep in mind, if your Mac is running v10.5.8 as your profile suggests, that is a very outdated OS X and you may have issues loading graphics at this point.
If you are using Safari, empty the Safari cache then quit and relaunch Safari and try loading an image.
And make sure there's enough free space on the disk to load images.
Right or control click the MacintoshHD icon on your Desktop then click Get Info.
That will open the Get Info panel.
Check Capacity and Available. Make sure there's at least 15% available disk space. -
After Effects export as Premiere Pro project weird PAL/NTSC problem
This post is not a question. It's here, because I've found a solution and want to share with You.
I've noticed a strange problem during export from AE to PR.
Ok, here I go.
AE = After Effects CS3
PR = Premiere Pro CS3
My AE project is D1/DV PAL Widescreen. It is a sequence of slideshow with some video effects applied. I needed that sequence in PR. I was happy to find a new feature - export as premiere pro project (new for me - i am pretty rookie ;). Thaks to this feature I have saved most of my disk space that is always to low. But, like every first try, this one was not perfect too. I had two problems.
Problem no 1.
I opened exported project in PR and saw message like "video effect AE.CC COMPOSITE not present".
Whole composition was working perfectly except that one video effect that was fundamental for this project.
*Solution was as easy as it can be. I've just copied that effect from AE plugin folder to PR plugin folder. It worked for this.
Problem no 2
Like says AE Help "When you export an After Effects project as an Adobe Premiere Pro project, Adobe Premiere Pro uses the settings from the first composition in the After Effects project for all subsequent sequences."
Project settings in PR was exactly D1/DV PAL Widescreen. So where is the problem You ask?
Therefore why my Timeline works in NTSC 29,97 frame rate if all settings match PAL 25 frame rate?! I don't know.
*Solution to fix this annoying bug is to create a new project in PR with all settings for D1/DV PAL Widescreen in this case. Than just import that PR project exported from AE. Now timeline works like it should in PAL frame rate.
That's it.
I hope this post is helpful, because I didn't find any answer for this here in Adobe forum.
AdamWho's says that Microsoft can't debug?
I used msconfig, first disabling startup items, -same result.
Enabled all startup items, disabled all non-microsoft services - AE worked!
I re-enabled each service in turn until AE crashed.
The fault was related to an item for a video streaming device I have in my house. It was Monsoon-multimedia's Vulkano Service. Sometimes under the old name of Hava, this is an app that acts like a sling-box to send my Cable TV to my screen. It does load a couple of virtual devices in device manager, and uses a proprietary codec.
I uninstalled the vulkano streamer application and rebooted the external Vulkano device. I reinstalled the Vulkano and verified it connected to the device and could stream. Once it did, I tried AE again and IT WORKED!
I wonder if simply rebooting the Vulkano would have fixed it. Its like opening the garage door to turn on the refridgerator.
Thanks for the help!
Jim -
Adobe Premiere Pro becoming Extremely Slow
I was just editing a vacation video and all of a sudden premiere pro became so slow that it would not even play the video back - I restarted it and my computer multiple times - I ran virus checks and cleanups over and over again and nothing worked. I am completely stumped.....
Any help will be GREATLY appreciated - THANKS!Ok:
Adobe Premiere Pro CC 7.22
I am currently installing the latest update
OS: Windows 7 Professional
Stuff in the Project:
MPEG-4 format with AVC video codec and AAC LC audio codec
MPEG-PS format with MPEG-2 Video video codec and MPEG-1 Audio Layer 2 audio codec
MPEG-4 format with AVC video codec and AAC LC audio codec
MPEG Audio format with MPEG-1 Audio Layer 3 audio codec
A Title made in Premiere Pro
No error messages
I was trying to playback the video when the problem occurred
This has never happened before
I am also running After Effects and Photoshop
I have no third-party effects or codecs installed
Computer Hardware:
Intel i7 4770 CPU @ 3.4GHZ overclock to 4.0GHZ
16 GB RAM
AMD RADEON 7870
I am not using Mercury GPU Acceleration
This problem only effects the preview window
I will try to playback the video in the preview window and it will either go black or will lag a lot - then I will try to exit and shutdown adobe and it will stop responding - so I have to do a force close
This does not happen with any of my other projects - only this new one
I simply don't understand why this is happening - I deleted everything and got it down to only the GoPro videos and the music and it still does it - but I have done MANY videos with GoPro footage since that is my main camera and this does not happen - I can paste the entire project in another finished video and it works fine - but if I try to create a new project with Mercury GPU acceleration OFF and paste it in there it still freaks out
I have tried to export the section that is different from what I normally edit(the after effects animation) but nothing from the project will export or render - if I try Premiere Pro fails and has to be shutdown - I tried converting the animation to MP4 - which is what I normally edit and the project still freaks out
Here is a link to a video of the problem
THANKS!
Maybe you are looking for
-
I would like to default set my HP Photosmart C7280 printer for black and white printing. Is that possible? What is the process?
-
I'm using Photoshop CS4 (Extended) on a machine running Windows XP (32 bit) SP/3 (with all the relevant updates from Microsoft). Everything seemed to work fine for the first week or so, then one day Photoshop crashed with an error message related to
-
Should SyndicationAgent be appearing in my Dock?
Yes, I know what this application does -- but its behavior changed recently, apparently when I upgraded to 10.4.3. It now appears in the Dock when it runs. It bounces, runs for a few seconds, then quits. Is this normal behavior?' If not, how do I get
-
Merging of contacts - how to STOP or manually UN-merge? not working properly!!!
Hi, how to STOP merging of contacts? Or manually un-merge them? Everybody seems to like that feature to avoid double entries, but in my case it leads to missing or accidently mixed up contacs. I use a Q10 with an exchange account for buisness contacs
-
Gmail acct no longer useable on Apple mobile devices
Yesterday evening, my primary gmail account stopped working on my iPad/iPhone. I tried restarting the devices, resetting the network settings, deleting and re-entering the account info, changing the password on my laptop and re-entering the email acc