Premiere Pro stopped working

Hi anyone, I tried launching my trial version of Premiere Pro, and it returns a message that it has stopped working, and windows will notify me when a solution is found, any ideas what the problem might be? And any way of resolving it to get working again? Thanks you all.

I have just found this thread
http://forums.adobe.com/thread/1235582?tstart=0
This may help?

Similar Messages

  • I have a pc with windows 7 professional.  I use adobe cs6 production suite and all of a sudden premiere pro stopped working.  I had installed a program recently and created a system restore point prior to it's installation.  I installed Zaxwerks proanimat

    I have a pc with windows 7 professional.  I use adobe cs6 production suite and all of a sudden premiere pro stopped working.  I had installed a program recently and created a system restore point prior to it's installation.  I installed Zaxwerks proanimator 5.1.  Restored computer back and I now get an error when trying to run any cs6 program it is a configuration error and it says to uninstall and reinstall.Won't uninstall says I have an error 1.  What should I do?

    clean and then reinstall, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • Hi i was told to come to the support with the error number 16.... for some reason my premiere pro stopped working and i am still paying for i but i had to reinstall it, which i dont know how to do though

    hi i was told to come to the support with the error number 16. for some reason my premiere pro stopped working and i am still paying for i but i had to reinstall it, which i dont know how to do though

    Hi Omid,
    Please refer to the help document below to fix the error 16:
    Configuration error 16 | CC, CS
    If the issue persists, please contact the support:
    Contact Customer Care
    Regards,
    Sheena

  • Premiere pro stopped working when starting help me

    My Premiere Pro CC keeps giving me a "premiere pro stopped working" when I try to start it. What do I do?

    Hello Genero,
    I'll see if I can help you out a bit here.
    There could be a number of different issues causing this problem...
    So if possible could you please let me know what operating system you are working on (Windows or Mac)
    Have you been using PP for a while and it just started this behaviour, or have you just recently installed and have not been unable to use the software at all?
    What is your setup like?
    A few things to try:
    -Reset your Preferences:
    When launching Premiere Pro from either a Mac or PC, hold down two keys while launching. This automatically throws away Premiere’s preferences.
    For the Mac, press Shift+Option
    For the PC, press Shift+Alt
    In both cases, continue holding the keys until the splash screen appears. You will know you successfully trashed preferences when the splash screen doesn’t have projects listed.
    -Add the newest update to Premiere Pro software, if you are not already up to date.
    -Install the most up to date driver for your graphics card and restart your computer.
    Please get back to me and let me know if that helped at all!
    Cheers
    Jasper

  • Trial of premiere pro stops working

    My trial of premier pro stops working. I've tried redownloading it but it still does the same thing.

    Once that happens, you need to pay for the software.

  • Trial premiere pro stopped working

    I know many people have probably posted something like this but the program crashes as soon as it opens (just started trial)
    i use a windows 7 lenovo laptop 1 year old
    the graphic driver is an Nvidia NVS 5400m
    i have never downloaded from nvidia so i don't know how to update my driver if that is the problem.
    Again i know this is a common problem but the suggestions i read don't quite apply to me

    For Windows, do NOT rely on Windows Update to have current driver information
    -you need to go direct to the vendor web site and check updates for yourself
    nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
    Do you have dual graphics adapters?
    Go to the Windows Control Panel and select Hardware and Sound and then select Device Manager... In Device manager you click the + sign to the left of Display Adapters... and see if 2 are listed
    IF YES, read below
    -http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
    -http://forums.adobe.com/thread/1001579
    -Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
    -link to why http://forums.adobe.com/message/4685328
    -http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2

  • CS 4 Dynamic Link to Encore doesn't work most of the time.  Encore stops operating after opening and periodically Premier Pro stops working.  I'm told that there has been a problem with CS4 when using Dynamic Link to go to Encore and build CD's.  Is there

    CS 4 Dynamic Link to Encore doesn't work most of the time.  Encore stops operating after opening and periodically Premier Pro stops working.  I'm told that there has been a problem with CS4 when using Dynamic Link to go to Encore and build CD's.  Is there a way around this?  Is there a patch to correct it?

    To build CD's???
    What problem does Encore have with DL?
    If DL is not working properly for you the way around this is to export from Premiere to either mpeg2-dvd for DVD or BluRay H.264 for BD-disks and import the files in Encore.

  • BROWSE BOX CAUSING PREMIERE TO STOP WORKING

    Hi guys
    I am having a problem with my browse box. If I try to save my project as the browse box opens but premiere will stop working and crash. If I try to import anything using the file menu the same happens. I can import using the media browser, but the problem is if I double click in the project panel by mistake when dragging media the browse box opens and premiere will freeze and crash losing all the progress.
    I am editing PAL HDV footage.
    How can I fix this problem?

    The version is CS5.0.3. I think its the Matrox drivers causing all these problems. Coz the RT X2 I had recently ceased the DVI preview and had to RMA it for a replacement. I have actually deleted the drivers and restarted installing them all over again, and it appears to be working, but some other projects it can cause the Premiere to crush, even After Effects and Photoshop if opened at the same time when dealing with dynamic linked compositions AE can just crash while I am working in premiere taking photoshop with it, then it will bring a dialogue box which say system tray or something. When I unistalled the drivers the problem disappeared.
    So why do I have to use the Matrox RT X2?
    Answer: When my RT X2 was away I used the secondary monitor hooked onto my GPU. When previewing fast action footage or that from  a panning camera, it was really awful it looked like 3D without glasses. Thats why I think I need to use my RT X2 at the moment. What is the best card for Colour Grading and previews, so I can really see all the out of focus shots and the likes?

  • I have pluged a portable battery to the USB and my macbook pro stopped working after that, right before it shut down there was a message on the screen that said something like " USB device is withdrawing so much power, please disconnect and connect again?

    I have plugged a portable battery to the USB and my macbook pro stopped working after that, right before it shut down there was a message on the screen that said something like " USB device is withdrawing so much power, please disconnect and connect again?
    if the device I connected have caused this, shouldn't the macbook itself have some type of protection that should prevent this from happening.
    because when I took it to an apple certified maintenance shop, the guy said that now it could only run while connected to the power. it won't run on batteries. and that I have to change the motherboard.
    can I just replace the damaged part only, would apple consider this as a design issue and they could pay for it, or should I just buy a new motherboard for 800$.
    Help.

    BB1B2,
    The problem is in finding a tech shop that will/can do board level repairs on Macs. They are few. And I certainly wouldn't spend $800 on a new logic board - I would replace the computer if I had to pay that much!
    You could call around to a few repair shops and see if they feel competent to isolate the problem and do a board level repair - but I'm afraid, in the end, that your search will be futile.
    Sorry,
    Clinton

  • My USB port on my Macbook Pro stopped working and i tried the SMC reset and the one closest to the SD port still continues to not work. Is there anything i can do besides bringing it in?

    My USB port on my Macbook Pro stopped working and i tried the SMC reset and the one closest to the SD port still continues to not work. Is there anything i can do besides bringing it in?

    I would do another SMC reset. If nothing changes you should take the computer in to an Apple store for a free diagnostic. You should make an appointment.
    http://www.apple.com/retail/geniusbar/

  • My hard drive on my MacBook Pro stopped working and I had to replace the hard drive.  I cannot get my playlists and photos to appear in my iTunes and iPhoto.  Does anyone know how to resolve this?

    My hard drive on my MacBook Pro stopped working and I had to replace the hard drive.  I cannot get my playlists and photos to appear in my iTunes and iPhoto.  Does anyone know how to resolve this?

    Peace Lilly wrote:
    ...  Will I loose everything if I connect the iphone to the itunes as a new device?
    To avoid that...
    See these 2 Links...
    Syncing to a New Computer...
    https://discussions.apple.com/docs/DOC-3141
    Recovering your iTunes library from your iPod or iOS device
    https://discussions.apple.com/docs/DOC-3991

  • Power adapter of my macbook pro stop working

    suddenly the power adapterr for my macbook pro stop working, the charger was working normally, anyone know of any evidence to verify its operation?

    Hi ..
    Try here >  Apple Portables: Troubleshooting MagSafe adapters

  • My adobe premiere has stopped working when i start debug in eclipse

    my adobe premiere has stopped working chrome dev tool start
    pls help me, thanks

    The simple answer is that some tool like a virus scanner or generalyl a crooked configuration of local ports due to specific network setups is blocking AE's external communication with those processes. A simple google search could have told you that. You need to figure out what it is.
    Mylenium

  • For some reason, the Flash Player on my MAC Pro stopped working, I've checked the install on my Adobe Flash Player and the are current, but the plug-ins don't seem to be working.  Can anyone help me get it working?

    For some reason, the Flash Player on my MAC Pro stopped working, I've checked the install on my Adobe Flash Player and the are current, but the plug-ins don't seem to be working.  Can anyone help me get it working?

    It happened w/ my MacPro 2.66 GHz Dual-Core Intel Xeon about 5 months ago; tried everything I could think of including multiple downloads of Flash, and hadn't seen any solutions here.  Adobe insisted many times that I download & update, but the newest vers. wouldn't work on the computer.
    On checking Adobe/Flash was reading the computer as being an earlier model. So the new version of Flash wouldn't work w/ it.  Snow Leopard 10.6.8 was being read correctly but not the computer model (can't remember what MP model  it was reading).
    Nothing worked. So -- a very old PC trick: If nothing else works get the hammer out and bludgeon it-- might work. So I reset everything by putting the Snow Leopard  install disk in, held down 'C' on restart and let it run. 
    Didn't take anything off the HDD first, just ran the install disk over everything.
    The experts on the forums are probably cringing right now & I'd like very much for them to jump in. Love to know how my computer model was being mis-read. All I can say is, for the brave and desparate, it worked for me. Something to keep in mind.
    It helped that I had a new computer on order & have 2 backups, one being mandatory. Might work only the one time but worth a check.
    Good luck on working this one out.

  • Vegas to premiere pro, it worked but not anymore!

    3 weeks ago i bought sony vegas 13 and i tried to export a project from this app to premiere pro. it worked. Now after several adobe cc updates (when it worked i didn't see the imageart while loading premierepro or AE) premierepro crash every time i try to load a project created by Vegas (even if it is of course .prproj extension).
    Any advice? i'm really sad about this! thanks.

    Assuming that you havn't turned the volume right down, have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound. Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

Maybe you are looking for

  • Creating a sort of reset button for movieclips

    Hi, i've got 10 movieclips in my movie. I use them for a sort of colour sudoku game and i wanted to have a reset button which reset them all to the first frame (which is a blank colour) Anyway, my problem is that if the movieclip is already on that f

  • Undefined number of parameters in a function

    Hi! Recenlty I've seen in somewhere that new verions of java enable functions to recieve an undefined number of parameters; something like (see the ...) public static void createList(int p1, ...){ }But I don't know where can I find information about

  • Paycheck Inquiry in ESS

    When the Payroll is being run in ERP can an employee change their Bank Details in ESS? Also when is the new Payslip available in ESS, is after the Payroll has run? Thanks WB

  • PDK for EP 7.0

    Hi all, We installed EP 7.0 successfully. But we couldn't find the PDK for EP 7.0 anywhere. The links which were mentioned in other threads are not working. I couldn't find any info regarding PDK download. Any inputs on the path to download PDK for E

  • Please Send me a copy of this system (firefox for windows and also linix) install disc. I have no internet solfware on my computer.

    Got virus in internet explorer,(window 7) I can't hook into any wireless connections. I figured that if I have Firefox then I can connect to a wireless hot spot.