Premiere Pro stops rendering and gives error message when encounters "RGB Color Corrector"

Premiere Pro (and also Encore) stops rendering and gives error message when it encounters a clip containing the "RGB Color Corrector" in any clip.  It will process clips without RGBCC, but will stop when it gets to one with RGBCC activavted.  PP will render clips if other effects, such as "Fast Color Corrector", "Color Balance (HLS)", and "Three-Way Color Corrector" are selected. However, these do not have the capabilities that The other color correctors will not do what RGB color corrector does, so I need to have this working to finish a large product that is due to the client.  Please help me..... I am not using the Creative Cloud version, and can't find either a download for the new update from 2013, or a phone number to talk to anyone. 

Using a Win7 computer with 2.8 quad core processor, 24 gig of ram, Nvidia Quadro 5000 video card.  Don't think I have any plugins.  I looked at one a while back for cleaning up grainy video, but I am not sure I paid for that.  Think I deleted it. 
Incidentally, someone named Jim on another part of the forum mentioned that this problem has been fixed in the CC version of the program.  I am using the non-CC version because I am 68 years old and only do seminars and documentation video.  Don't need so many bells and whistles, and definitely don't need learning curves every few weeks.  CS6.0.3 works fine for me.  By the way, someone else said that maybe version 6.0.1 might work better and I should revert to that.  Not sure if it is the version i have on the disk upgrade to 5.5 that I purchased in December. 
As it stands now, I have 7.5 hours of a seminar that is ready to go out the door.  If there is an upgrade I can get from Adobe, maybe you can tell me about it. If I have a setting incorrect in the video output format, maybe I can change that.  So far it just happens with clips in my video that have RGB color correction. 
Rick

Similar Messages

  • Error Compiling when using RGB Color Corrector and Unsharp Mask

    If I apply the RGB Color Corrector and and Unsharp mask to a clip within a sequence and try to render the sequence or a small portion of the work area I get the Error Compiling: Unknown error.
    This is occurring within a project I have updated to Premiere CS6 from Premiere CS5. 
    I have tried creating a new sequence and importing the same clip and other clips.  Anytime I try to use both the Unsharp Mask and RGB Color Corrector I am unable to render.  I have tried this with Mercury Playback both in hardware and software modes with the same result.
    Has anyone else seen something like this?

    Okay, glad this occurs for others too and I am not experiencing something isolated. The issue here is this shouldn't be happening at all. 
    Premiere CS5 has no problem with this.
    Yeah if I turn off one effect or the other no problem.  Unfortunately it doesn't matter the order I place the effects in I get the same error regardless of which is placed first.
    Nesting does work.  If I create a sequence, apply one or the other to the clip in the sequence then embed the sequence in another sequence and apply the remaining filter to the sequence containing the clip then I can get my color correction and edge definition.  But this is a work around. 
    There seems to a bug here since there were no issues when using RGB Color Corrector and Unsharp Mask simultaneously applied to one clip in CS5.  I doubt there will be a fix for this anytime soon so it looks like I will have to use another method for color correcting or apply RGB color correction to clips already embedded in a sequence as I move forward into solely using CS6.
    (How this can become an issue is that after applying effects and color correction to several clips within a sequence I like to render that entire sequence.  Then this sequence is ebedded in another main sequence and I can add additional effects and transitions and overlays without killing the live playback speed and only have to render smaller amounts of content from additional tracks.  It ends up saving a lot of time after the initial length of rendering.)
    Thanks for the suggestions.

  • Hi i was told to come to the support with the error number 16.... for some reason my premiere pro stopped working and i am still paying for i but i had to reinstall it, which i dont know how to do though

    hi i was told to come to the support with the error number 16. for some reason my premiere pro stopped working and i am still paying for i but i had to reinstall it, which i dont know how to do though

    Hi Omid,
    Please refer to the help document below to fix the error 16:
    Configuration error 16 | CC, CS
    If the issue persists, please contact the support:
    Contact Customer Care
    Regards,
    Sheena

  • I just set up my new iMac, and receive error messages when trying to purchase from the iTunes store (error 8003) or update from the App store (error 403 forbidden). THOUGHTS?

    I just set up my new iMac, and receive error messages when trying to purchase from the iTunes store (error 8003) or update from the App store (error 403 forbidden). THOUGHTS?

    I am not sure what you mean by "Flash Player for steam"; the only Flash Player installers I know is the ActiveX (for Internet Explorer) and the plugin (for other browsers); you can find both at http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html#main-pars_header
    [topic moved to Flash Player forum]

  • I upgraded new software onto my iphone 4 however it stopped syncing and said error so when i tried to access my phone the itunes USB was showing in my phone screen and now i cannot access my phone

    i upgraded new software onto my iphone 4 however it stopped syncing and said error so when i tried to access my phone the itunes USB was showing in my phone screen and now i cannot access my phone

    When it stopped and said error, what was the error? You are saying that you disconnected the phone from the computer and all you see is the USB showing on the phone? Then you need to reconnect to the computer and restore the phone.

  • Where to control and give error message before saving trade promotion?

    Hi Gurus,
    our CRM system is upgraded from 5.0 to 7.0 and we have some problems. One of them is, in 5.0 version, we check some conditions and display error message in the AUTHORITY_CHECK method of CRM_MKTPL. So the check is made and message displayed if errors found while entering the trade promortion, at the beginning. And it does not allow any save action too. After upgrade I write this code to CHECK_AUTHORITY method of  CRM_MKTPL_OL_OBJ. Now it is not make a control while a trade promotion is entered, so it doesn't stop saving trade promotion although there are errors. I can stop saving maybe in the method of CHECK_BEFORE_SAVE? But how can I display own check messages at the beginning of trade promotion? Please give idea.

    Astron,
    There are multiple BADIS for the Trade Promotions.
    Use CRM_MKTPL_OL_OBJ for Header Valiadtions and CRM_MKTPL_OL_ASG for the Item (assignment block validations).
    You need to use CHECK_ATTRIBUTES method of these BADIs to raise any errors.
    Just append you message to ET_MESSAGE_LOG and set EV_HAS_ERRORS to 'X'.
    If you need an error message on SAVE, use CHECK_BEFORE_SAVE method of the CRM_MKTPL_OL_OBJ BADI and append the messages and Mark REJECT_SAVE to 'X'.
    Further there are many methods that trigger on different events like Status change etc.,
    Regards,
    Masood Imrani S.

  • ITunes 7 gives error message when playing songs off ipod

    Whenever I connect my ipod to my computer and use itunes to play songs from it...it gives me the following message whenever a song plays.
    "iPod is in use and cannot be updated. The required file is in use."
    Does anyone know why this would be happening? I have my iPod set on manual update and I have already installed and run the new iPod update so I have no idea why this is happening.
    Thanks.
    PS. I have a new 5th gen. model iPod.
    Powerbook G4   Mac OS X (10.4.7)   12-Inch

    Hey ermides,
    Thanks for the question. The following resource provides information if you are receiving a -50 error message when syncing:
    iTunes displays -50 error message when syncing iPod on Windows XP - Apple Support
    http://support.apple.com/en-us/ts1539
    Thanks,
    Matt M.

  • Itunes gives error message when trying to backup ipone 6.

    ITunes gives an error message when trying to backup IPhone 6.  I followed some of the advice I have seen delete old backups and try again, but I still get an error message. 

    What error message?
    Thanks

  • First Generation Ipod Nano gives error message when using Windows Vista

    I have a dual boot PC running XP Home and Vista Home Premium. My three kids have Ipod Nanos. Each kid has their own user profile on the PC. The later generation Nanos (2) work with Vista perfectly.
    The first generation Nano causes an error message when you connect the Ipod to the PC while running Vista. If you run the XP and associate the Nano with XP everything syncs perfectly with no error messages.
    Conclusion: Early Nanos work with XP, but do not function properly with Vista.
    Request of Apple INC. - Fix this to work with Vista, or send me a new Ipod free of charge.

    All of the following programs should work with Vista.
    Yamipod. This is a free program that transfers music from iPod back to the computer. However, it does not transfer playcounts/ratings etc.
    Another free program is Pod Player.
    SharePod is also freeware.

  • Mail 2.1 and password error message when checking for incoming mail

    I get a "password rejection" error message when Mail 2.1 tries to check for incoming messages and there are no messages to retrieve (I have an Earthlink account). I don't have any problems sending messages. When I send a test message to myself, Mail can retrieve it. When I check mail a few minutes later, I get the "password rejection" message from Earthlink. This also happens when I use MS Entourage (v10.1.6). I have been using Entourage for years and just recently started using Mail and this password problems seemed to appear recently (last few weeks).
    Has anyone else experienced a similar problem? Since this happens in both Mail and Entourage, I don't know if it is Mac OS 10.4.10 or Earthlink. I tried Earthlink tech support and they were not much help.
    Thanks,
    Kenny

    Problem resolved by itself. I think it was a problem with my ISP.

  • F-04: give error message when clearing AP items with payment block key(R)

    Hi all,
    Customer wants to prevent payment for AP items with payment block key(BSEG-ZLSPR) .
    I want system giving error message when doing payment clearning with t-code:F-04.
    How can I realize it ?
    Thanks Grus!
    Lynn

    Please configure the following nodes properly:
    Financial Accounting>>Accounts Receivable and Accounts Payable>>Business Transactions>>Outgoing Payments Global Settings>>Payment Block Reasons>>Define Payment Block Reasons & Define Default Values for Payment Block
    For the error message: You may define a validation in OB28 with the help of ABAP consultant

  • Premiere Pro CS6 Project Manager gives error & will not manage project - OS X Lion 10.7.5

    Premiere CS6 project manager reports  an error and will not manage my project. I have tried several times with both "Create New Trimmed Project" and " Collect Files and Copy to New Location". I have also tried to manage the project with options checked and unchecked (Include Preview Files, Include Audio Conform Files, Rename Media Files to Match Clip Names). Every time I try to manage the project, the process takes a few hours and then gives an error asking me to try again.
    The project is 90 minutes long and uses multiple footage formats:
    Sony FS100
    Sony NEX7
    Sony NEX-5n
    Canon C300
    Canon 5DmkII
    Panazonic HVX200
    My computer is:
    Processor  2 x 2.66 GHz 6-Core Intel Xeon
    Memory  12 GB 1333 MHz DDR3
    Graphics  ATI Radeon HD 5770 1024 MB
    Software  Mac OS X Lion 10.7.5 (11G63)
    Is this a bug, or are there specific things I can do to troubleshoot the problem? I have read of issues with AVCHD. I have confirmed all of my AVCHD folders are intact. Any other Ideas?
    THANKS!

    I have this same problem on a Mac with CS6. I was simple trying to archive a project using the "collect files" option. After five or six hours of troubleshooting (Thanks Adobe) I have narrowed it down to MXF clips that came over in a Final Cut EDL (Projects created in PP with MXF files seem to be fine).  In other words, as I was transitioning from FCP to Premiere Pro, I sent four or five projects out of FCP as an EDL, opened them in PP and continued to edit.  It seemed to work really well until I attempted to archive my media.  If there was a single raw MXF file in the timeline (Not the project panel for some reason) the Project Manager would give me the standard error:"An unknown error occurred during the Project Manager operation. Please save your project and retry the operation.".
    I have found two solutions that seem to work, both of which are a pain in the ax. 
    Option 1: Save the original project file only to an archive folder.  Then delete all the old timelines from the project, and save the project with a new name.  Create a new timeline and just drag all the raw video and audio into it. (Project Manager needs a timeline of some sort to archive) Then use the Project Manager to archive the modified project.  If I need the project in the future, I'll need to open the original PP project and relink all the media from the archived "media only" project folder. 
    Unbelievably, if you were to take this route and then re-edit the project in the future, it looks like you would run up against the same archiving issue AGAIN next time (At least using CS6). You'd have to go through all the steps above to archive it a second time. Depending on the size of your project, you may want to take option 2 and get the pain over with once-and-for-all.
    Option 2: If you only have a couple of MXF files in the timeline (in my case I had mostly renders from AE by the time I was done and THAT raw project had archived in AE just fine) you can export the raw MXF files to another format, then replace the media in your project panel.  Finally, use the Project Manager to archive the project like you should have been able to in the first place if Adobe had written the code well in the first place!

  • Export from premiere pro cs4 for youtube - new error message from youtube

    I wonder if anyone has had a similar problem to me.
    I am using CS4 on a windows 7 computer.
    I have a number of films that I am in the proces of exprting for upload to youtube.
    Since youtube has updated the design and function of it's upload window I am now getting a warning once the upload completes saying "The video that you uploaded may have audio/video sync issues. Please refer to this article for advice on how to correct this issue should it arise."
    The link takes you to a page which gives you a range of settings. It suggest Quicktime as the preferred format with H.264 encoding.
    But in Adobe media encoder cs4 if I select format: quicktime, there is no h264 option.
    I have tried selecting Format: H264 and the apparently obvious Youtube widescreen HD format, but still get the warning. Our footage is all PAL so I normally change this from NTSC to PAL - but even if I do not make this change, I still get the warning.
    I wondered if anyone else has discovered this, and if they have found a work around?
    Any suggestion would be appreciated.
    I am using:
    adobe media encoder 4.2.0.006
    adobe premiere pro 4.2.1
    Finally, in terms of the warning, I do not generally notice sync issues, but occasionally I giet visual glitches once the film is uplaoded to youtube - the latest involved the whole bottom half of the screen being smudged, as though someone had smeared the image from the middle down to the bottom of the screen. It only lasted about half a second.
    Thanks
    Patch

    Hi Jim, you are quite right... that is what it says.
    It is just that when I export a movie using premiere pro, and upload it I get a warning message from youtube. I never like a warning, so I followed the link to the article hoping for a solution.
    I assumed the article indicated youtube's preferred format, so thought 'great, I'll use that- but could not find them in Premiere Pro.
    As you point out it does say it is for iMovie, Final Cut Pro or Quicktime (so my mistake).
    As Ann suggests, as the film looks ok on youtube, I will just carry on using the youtube settings in Premiere Pro, and ignore the warning.
    Thanks for the sugestions,
    Patch

  • Premiere Pro export issues. Unknown error messages, extremely slow export times, strange I/O & disk usage

    Hello,
    I'm hoping I can start getting answers to some big issues I've been having running Premiere pro. I've had similar issues with CS6 but it seems like with CC and every recent update, the problem hasn't been resolved, its even worse.
    The main issue I have is seeing the 'unknown error' message everytime I try to export a file. I'm working with RED footage. When I turn off the CUDA support, I can export without the error but my export time goes from a few minutes to sometimes hours in the render time!
    I've looked through pages and pages of forums and there are so many people saying the same thing, with millions of opinions of what the problem is. Regardless, the only thing I tried that worked so far is turning off the CUDA support.
    Now something I recently noticed, is that the difference isn't the GPU usage, I still show GPU being used at 500mb or 1gb out of the 2gb that it has (GTX 680)
    The strange thing is without the mercury playback option, I'm seeing that disk usage and I/O go way down to kbs from a very high number. This would make sense why I'm seeing such huge changes in render times even though it still shows my 6 core CPU maxed out and ram over 40gb out of 64 that are installed.
    Does anyone have a suggestion on what may be happening here? Its the only thing that has plagued my system using Premiere since day one and there seems to be no way around it..

    Best way to get a real answer is go to the Tweaker's Page, download the most recent PPBM benchmark test, and run it. It's a folder that has a resource monitoring/logging program and a PrPro project with files that is short but HEAVY in effects, both AE and PrPro, so it tests all parts of a system's capabilities from disc in/out to GPU capability/use to CPU, fsb, RAM, you name it ... and after sending that back in you get a complete report on where your computer did well and what the choke-points were.
    Also ... over on the Hardware forum is the place where the techies amongst us hang ...
    Neil
    Tweaker's Page ...
    http://ppbm7.com/index.php/tweakers-page
    Hardware Forum ...
    https://forums.adobe.com/community/premiere/hardware_forum

  • Trying to install software update, phone stopped responding and gives error code 9

    While trying to update software on my iPhone 4, it stopped during installation and gave error code 9, now it says the phone must be restored but will not complete the installation and still gives error code 9, very frustrating.  I tried on 3 different computers, same results.

    reset preferences -
    after effects:  http://helpx.adobe.com/after-effects/using/preferences.html
    flash:  http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
    illustrator:  http://helpx.adobe.com/illustrator/using/setting-preferences.html
    indesign:  https://forums.adobe.com/thread/526990
    photoshop:  https://forums.adobe.com/thread/375776
    if that fails to solve the problem, restart in safe mode and test.  if ae works, you have a conflicting non-essential program.  you can use your activity monitor to find it.
    if restarting in safe mode fails, uninstall, clean (Do a clean install) and reinstall ae.

Maybe you are looking for