Premiere Pro to Speed Grade Error

so this is the error i get when trying to do a direct link to adobe speed grade.  im sure this is a simple fix.  right now im on the 30 free trial for both applications. 

I've resolved my problem thanks to post by @gagneh on this forum. It turned out to be the NVidia nView Desktop Manager applet found in the Control Panel. It was enabled, and I believe it has been enabled for a long time. I don't know if something in a recent update broke things, but as soon as I disabled the Desktop Manager, my dynamic link started working again in all aspects. Give it a try. Good luck.

Similar Messages

  • When Exporting "Adobe Premiere Pro sorry, A serious Error has accord that requires....."

    Since the new update when Exporting I get this message ""Adobe Premiere Pro sorry, A serious Error has accord that requires....." I've tried to reinstall the software on both computer without any luck. Please Help!

    Premiere worked before.
    I’m not using any third party effects or codecs.
    MAC
    Processor  3.4 GHz Intel Core i7
    Memory  24 GB 1600 MHz DDR3
    Graphics  NVIDIA GeForce GTX 680MX 2048 MB
    Software  OS X 10.9.1 (13B42)
    Adobe Premiere Pro CC Version 7.2.1(4)
    When I press EXPORT I get this message "Adobe Premiere Pro sorry, A serious Error has accord that requires....."

  • Premiere Pro has encountered an error.  CS6

    Dear Adobe Community
    I would be grateful for some help as Premiere Pro has begun crashing on me.
    I am using CS6 - on two different Mac computers that both encounter the same problem.  I am making a film 1920 x 1080 made up of almost 60 smaller films of 180 x 180 pixels with a color matte underneath them.  Everything had been going fine and I was able to export three different versions of the film.  Now unfortunately it no longer works!
    Using the same process, that I used before that worked successfully, I select all the elements of the timeline and try and nest them.  At this point I get the following error message:
    Premiere Pro has encountered an error.
    .  [/Volumes/BuildDisk/builds/tightykilt/shared/adobe/MediaCore/Backend/Make/Mac/../../Src/S equence/LinkContainer.cpp-245]           Continue
    On pressing Continue - it "quit unexpectedly".
    I've tried using a different Mac and have the same problem.
    I tried slim lining the project to just the assets that I'm using, saving and rendering and saving and it still keeps on crashing like this.
    I would be grateful for any help or advice.
    Thank you very much!

    Which operating system?
    Yosemite sometimes has problems, often related to "default" permissions needing to be changed
    -one person's solution https://forums.adobe.com/thread/1689788
    -and a Java update https://forums.adobe.com/thread/1507936
    -update may break things https://forums.adobe.com/thread/1772260

  • Premiere Pro has encountered an error - nothing seems to fix it!

    Hey all,
    I'm running Premiere Pro v. 6.0.2 on Mountain Lion 10.8.2, with a standard ATI Radeon 5770 in a 3.33 GHz 6-Core Mac Pro 5,1.
    Whenever I try to open the program OR a file, I get the following message:
    "Premiere Pro has encountered an error.
    [/Volumes/BuildDisk/builds/slightlybuilt/shared/adobe/MediaCore/ASL/Foundation/Make/Mac/.. /../Src/DirectoryRegistry.cpp-283]"
    The strangest thing is that I just used Premiere yesterday, and after quitting it last night, tried to open the same file and got this message. I thought maybe the file was corrupted but I get the message just by launching without even opening via a project file. I then updated from 10.8.1 to 10.8.2 in the hopes that something internally might get fixed and it did not rememdy the problem. I have been scouring forums and most have pointed to resetting the permissions in the Home folder which I did both through Terminal and the "resetpassword" Repair Utility method. It still won't open! This has been very frustrating and I would greatly appreciate any advice to get this sorted out.
    As a side note, whenever I open After Effects (11.0.1), it "unexpectedly quits" without an error log. I was also able to open this at least since I've had Mountain Lion, although I did not use it as recently as Premiere.
    I appreciate any help and please let me know if you need any more information. Thank you!

    I'm not a Mac user so I can't offer much advice other than to recommend uninstalling everything and using the adobe cleaner utility after the uninstall is completed. Then re-install everything, hopefully that should fix the problem. Sorry I don't have any info on what actually caused the issue though. But I'm going to assume that something has obviously gotten corrupted somehow. I honestly think that uinstalling is probably going to be the easiest solution here.
    Here is a link to the cleaner utlity.
    http://www.adobe.com/support/contact/cscleanertool.html

  • Premiere Pro has encountered an error - Mac 10.9.4

    Hi,
    I’ve just downloaded and installed (twice) premier pro (CC 2014) and am receiving this error message when I attempt to launch the program:
    Premiere Pro has encountered an error.
    [/ppro801/releases/2014.03/shared/adobe/MediaCore/ASL/Foundation/Src/DirectoryRegistry.cpp -283]
    This happens both when I open the it from my Applications folder and when I try to open an existing project.
    I’m on 3.5ghz Intel Core i7 iMac running on OS X 10.9.4
    Anyone else getting this and found a way around it?
    Thanks

    next link says After Effects, but check YOUR permissions !!!
    -http://blogs.adobe.com/aftereffects/2014/06/permissions-mac-os-start-adobe-applications.ht ml
    -Mac 10.9.4 and OpenCL issue https://forums.adobe.com/thread/1514717
    -Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
    -more Mac 10.9.3 https://forums.adobe.com/thread/1491469
    -and https://forums.adobe.com/thread/1507936

  • Premiere Pro has encountered an error.

    Hey All!
    Getting a new error popping when opening a project.
    Premiere Pro has encountered an error.
    [/Volumes/BuildDisk/builds/tightykilt/shared/adobe/dvamediatypes/project/mac/../../src/Ti ckTime.cpp-207]
    I can usually click continue about 10 times and get the project to open. It only happens when clicking this particular project file. Of course all my backups of the same project are doing the same thing. AutoSaves don't have the error, but are too far back to revert to one of them. It doesn't seem to effect my ability to work on the project. Just a little concerned because this is a long form doc with a couple hundred hours of footage and a tight deadline. Hoping to be able to get through it. Any ideas what this is?
    Best!
    Dave

    Hey John! Yeah, same thing. In fact, same thing on multiple machines! Seems to be that something strange has happened to that project and that specific file.
    Previous AutoSave files are fine but the latest one is from 5hours before the original project file, so they're useless to me.
    Up unitl now, PPro 6 has been incredibly stable. And keep in mind I can still get the project open and work, so I'm not down because of it.

  • Premiere Pro has encountered an error message

    Hello, I keep getting this message everytime I try to open premiere pro cs5. It says Premiere Pro has encountered an error
    [/Scully64/shared/adobe/MediaCore/ASL/Foundation/Make/Mac/../..Src/DirectoryRegistry.cpp-2 83]
    Can anyone help me resolve this issue?
    Thanks, Brandon.

    The answer in my case was simple: if you use certain video converters (such as HandBrake) to convert video from a video camera to something Premiere can import, sometimes the converter sets the framerate to 90,000 frames per second (such as HandBrake does). (NOTE! I don't know which software is at fault, or if it's a combination of both, only the end results.)
    If you try and import that video into Premiere, one of two things happens: the video is at 90,000 FPS, and less than a second long... or the above error occurs, and in my case, Premiere crashes to the desktop. I've seen it do both. But in both cases the fix is the same ---
    If I go into the settings in Handbrake, and instead of leaving 'framerate' set on 'source', manually set it to (29.97, or whatever the source actually WAS)... then you re-encode it, and like magic - it imports into Premiere and no longer shows that error message.
    Note that in other video editing software, the same source files will work just fine.
    It's something specific to Premiere (or the video file, and how Premiere sees it) that causes this issue.

  • Premiere Pro has encountered an error. [/Volumes/BuildDisk/builds/MightySilt/shared/adobe/MediaCore/

    Premiere Pro has encountered an error.
    [/Volumes/BuildDisk/builds/MightySilt/shared/adobe/MediaCore/AudioRenderer/Make/Mac/../../ Src/AudioRender/AudioPrefetch.cpp-99]
    I always get this message.. any idea why???

    This might help.
    http://forums.adobe.com/message/5169479#5169479

  • Premiere Pro CS5.5 startup error. (DirectoryRegistry.cpp-283)

    When i start up Premiere Pro CS5.5 on my iMac with OSX Lion it immediately shows this error:
    Premiere Pro has encountered an error.
    [/Volumes/BuildDisk/builds/Mulder64/shared/
    adobe/MediaCore/ASL/Foundation/Make/Mac/../../
    Src/DirectoryRegistry.cpp-283]
    I don't really know what it means but i think it is because premiere can't find a file to start up because it doesn't have the right privileges. (When i login my mac as root user i can start premiere without any problems also in my administrator account with terminal starting it with sudo works without problems).
    Did someone had this problem before? And how do i fix the problem?
    Thanks in advance, Levi.

    I have run into the same problem. I am running a late 2008 MBP with 2 480GB OWC SSD's and 8GB of OWC RAM. I have 10.7.5 installed and am running in 64 bit mode. I get this pop-up when I try to open Premiere or Bridge:
    Premiere Pro has encountered an error.
    [/Volumes/BuildDisk/builds/Mulder64/shared/adobe/MediaCore/ASL/Foundation/Make/Mac/../../S rc/DirectoryRegistry.cpp-283]
    I am the Admin on this computer. I don't know how to give myself more admin rights than I already have? Photoshop starts up without issue.
    Any suggestions?
    Thank you,
    Scott

  • Crashing when dragging clips into source box! "Premiere Pro has encountered an error."

    Hi, I just installed the CS5 Premiere Pro software trial version and it keeps on crashing when I drag my imported clips into the source box?
    It says:
    Premiere Pro has encountered an error.
    Does anyone know why this is happening? Please help b/c I would like to use this program for a project due Monday. Thank you so much!

    @ Andrey V.: I tried that but it did not work. I still get the same error message. =(
    @ Jeremy D.: It's "protected MPEG-4 movie"

  • Premiere pro has encountered an error, premiere does not function any more, close

    Why does this application not start again.
    It shows a Premiere Pro Debug Event
    Premiere Pro has encountered an error.
    With a path that shurely does not exists on may computer. Waht schall I do. I pay for this program an want to be productive with it.
    Greetintgs Andreas

    More information needed for someone to help... please click below and provide the requested information
    -Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840

  • Premiere PRO CS4 " unexpectedly quit error" since loaded Sorenson squeeze 8.5 is there a bug fix

    Premiere PRO CS4 " unexpectedly quit error" since loaded Sorenson squeeze 8.5 is there a bug fix

    CS4 is old, and there will be no more updates, past the ones on the update site
    All Adobe updates start here and select product, read to see if you need to install updates in number order, or if the updates are cumulative for the individual product http://www.adobe.com/downloads/updates/
    Ask Sorenson if 8.5 is even supposed to work with CS4

  • Premiere Pro has encountered an error  [URGENT]

    I can´t open my recent project.
    I receive the following error Message:
    "Premiere Pro has encountered an error.
    [..\..\Src\Clip\MasterClip.cpp-2802]"
    Even if i want to open the auto-saved projects i get this error message.
    I tried to import the project into a new project. It opened and i could edit it. But after saving and reopening i get the same error message.
    WHAT CAN THIS BE? I have to finish the project tomorrow!
    Could file naming be a problem?
    What is Src\Clip\MasterClip.cpp? What does it cause?
    Please, i need any clue!
    kind regards
    ps
    Windows 7 - Premiere Pro 5.03
    The project has different sequences and audiofiles.
    I´m working on this project for a week and nothing was wrong.
    Last step i have done was rendering a part of a sequence. After this render i couldnt open the project.
    Strange was that in the rendered file the second audio track wasn´t rendered.

    I've read a lot of people are now seeing this exact same error under varying circumstances. Let's hope they get it resolved soon!
    In the mean time, here's a work around I've been using to recover from this...
    • After the error and impending crash, open the autosaved copy of the file (in most cases will be more current than your last saved original) and you will notice the error message pops up again - just click continue. All of your media will look like it's missing/needs to be loaded in the preview window, but it's a simple fix and quick too!
    • Select-All of your content in the Timeline panel
    • Right-click with your mouse and click off the "Enable" option
    • Right-click again and re-select the "Enable" option
    All your media will be online and connected as well as your rendered caches.
    *Note that once your project has crashed, it will give this error EVERY time you save/close/reopen the project, so you'll have to repeat the steps above each time.
    Cheers,
    Jeff
    Jeff Foster
    Author/VFX Producer
    http://PixelPainter.com

  • Debug Event : Premiere Pro has encontered an error. [..\..\Src\PPixhandleUtilities.cpp-114]

    Hello,
    I have problems in Adobe Premiere CS3, as below:
    1. =================================
    Debug Event:
    Premiere Pro has encontered an error.
    [.. \ .. \ Src \ PPixhandleUtilities.cpp-114]
    2. =================================
    Adobe Premiere Pro is running very low on system memory. Please save
    your project and proceed with caution.
      ================================================== ======
    I've tried to reinstall Adobe Premiere of her, but the problem persists.
    What should be done to solve this problem which paralyzes all my work?

    How to repair projects that get a "TickTime.cpp-290" error after opening a specific project.

  • Premiere Pro has encounters an error upon bootup

    I am getting the following error when Premiere is booting. I also notice that i don't have any effects available. I am able edit and save videos just fine.
    Premiere Pro has encounters an error
    ..\..\Src\Core\PropertiesImpl.cpp-479
    I am running the latest version of Premiere (CS6).

    1st, are you (you MUST) running PPro/Encore using an Administrator level account?
    - even if you are, do what it says here http://forums.adobe.com/thread/969395
    2nd, the 840 link I posted asked for a LOT more information... please post hardware details
    - it MAY be that your Windows is not up to date via Windows update
    - it MAY be that your hardware device drivers are not up to date (details needed)
    >don't have any effects available
    This MAY help http://helpx.adobe.com/premiere-pro/kb/features-presets-missing-premiere-pro.html
    - or Missing Activation http://forums.adobe.com/message/4626662
    - or Missing Content http://forums.adobe.com/thread/1065117

Maybe you are looking for

  • How to return a specific value in an if statement

    Hi all, Need some help regarding a report Im creating. I am a total newbie to SQL so I guess this question is really simple to all of you. I have a column, UDF58, in a table that can have 3 different values, 10, 25 and 35. If the value is 10 I want t

  • Another bug introduced in production release - table filter

    Hello guys, check this scenario: 1) Open some table 2) Use the column filter to filter the table 3) Try to use the column filter on same column again without clearing all filters. The table filter will display only "Remove ('xyz')" message, where xyz

  • Adding a new FWSM context through CSM

    Hi, I have a Multi-Context FWSM ver 4.0 and a CSM ver 3.3.1 to manage it. I need to know is there any know issue when creating a new context through the CSM UI !!! By the way, the devices (FWSM and CSM) user accounts are managed by an ACS ver 4.2 Bes

  • Interactive template SWF

    Hello, I am currently creating a interactive feature for my company's website, where we would like our customers to come, select one of our marketing tools templates, and be able to customize their information using Input text boxes, colorpicker, fon

  • N95 - Does your camera clicks when auto focus (hal...

    N95 - Does your camera clicks when auto focus (half-pressed)? When i press the camera button half way through it makes a noticeable "click" noise after locking on an object. It doesn't make the clicking noise when i press the camera button one time w