Premiere Pro v4.01 Problem with Mercalli

Prodad Mercalli works normally in PPro v4.00 but now it can't launch in v4.01.
Can any Mercalli users verify this problem please ?

>Prodad Mercalli works normally in PPro v4.00
How did you get it to work with 4.0? I couldn't do it and contacted Prodad. They said they are working on it.

Similar Messages

  • Premiere pro CC (2014) problems with audio on .mts files

    Hi,
    This is a recent problem I have been having when trying to play certain clips in Premiere Pro CC (2014), I import the entire private folder and some of the clips play as normal and others seem to have skipping audio. This causes the second half of the clip to not have any audio in it at all because it is bunched up at the beginning. I don't even know where to start with trying to fix the problem, the only thing I have done is re import the files and put them in new folders to change the destination it has been imported from.
    Any advice would be extremely helpful as it is mostly stopping me from getting on with any work,
    Thanks!

    Hi amber1992,
    I will suggest you to go ahead and clean the Media cache and Media cache files folders manually.
    MAC OS: Click on Go menu>Go to Folders>type ~/Library and click ok. This will open User Library folder and then navigate to Application Support>Adobe>Common>Media Cache and Media Cache files. Delete all the files from these folders.
    Windows: C:\Users\username\AppData\Roaming\Adobe\Common or you can Click on Start button and in search type %appdata% and open Roaming folder>Adobe>Common>Media Cache and Media Cache files.
    Once done launch the project again and check.
    Regards,
    Vinay

  • Premiere pro cc 2014 problems with audio

    I have edited some sequences in premiere using sony xdcam ex clips. The clips where recorded as 1080 50i. I have edited it in the same sequence properties as premiere sugested it. All there is fine and audio is playing well. The problem strats when i change the sequence properties and select it at 1080 60i or 29p. The audio is distorted and it sounds like robotic, sometimes audio is muted on audio transitions. When i revert the properties back to 50i then all is fine.
    Anyone else experience the same problems?

    Sometimes i must add some clips that are recorded on canon 6d on 29.97p. and this clips look choppy and jerky on 50i sequence. But on 60i sequence both 50i and 29.97p look good. On premiere cc i cann change sequence properties without any problems with audio, only on cc 2014 that audio problem exist.

  • Premiere Pro CS3 Capture Problem with Audio

    Setup:
    Premiere Pro 3.2.0
    Video Capture Device: Blackmagic Design Intensity Pro capture card
    Audio Capture Device: HT Omega Claro Plus XP
    OS: Windows 7 Ultimate 64-Bit
    I am able to capture video with Premiere with no issues.  However, the audio does not get captured even though it is set to capture both audio and video.  I am configured for ASIO capture and playback.  Strange thing is that I can load Adobe Soundbooth and it will capture the audio just fine (from the same input stream as I'm trying to do with Premiere).  What gives?  I'm almost out of options.
    From what I can see, when I hit F5 and go into capture mode, Premiere seems to insist that it must capture audio from the blackmagic design audio ports, and even though I have the audio explicitly setup for the Claro in audio hardware, if I go into the capture settings, it still is set on "Blackmagic Capture" as the capture format, and when I go to settings, I can pick the audio channels to capture, however.... I don't want to capture with the blackmagic for audio.   The capture format MUST be "Blackmagic Capture" or else I can't capture the video.  It still doesn't make sense though, since I have the audio hardware set for input from the claro ASIO.  It shouldn't force Blackmagic audio.
    Any ideas?  Please help

    Some additional information:
    Sound card is a Claro Plus XT not XP.  Used to typing XP heh
    Also, the video capture works with the included blackmagic capture software, as well as freeware solutions like VirtualDub and a Japanese freeware program I use.  I'm able to capture video and audio without issue on those.  Just don't know why Premiere doesn't do it...

  • Adobe premiere pro cc 2014 problem with Yanobox Motype

    My premiere pro always freezes when I'm trying to type a title in Yanobox Motype.
    Please help me.

    Locked... duplicate discussion... see GTX 970 and Premiere Pro

  • I am a final cut pro user and i recently started using adobe premiere pro. for anyone firmiliar with fcp, there are interesting ways of doing introductions on it and im wondering if anyone could tell me if premiere pro has preset introductions i can use

    i am a final cut pro user and i recently started using adobe premiere pro. for anyone firmiliar with fcp, there are interesting ways of doing introductions on it and im wondering if anyone could tell me if premiere pro has preset introductions i can use.

    Singenu wrote:
    I tought about looking in Monitor Activity to see what happens...
    Well, when I start working (should I say try to work with FCPX, activity monitor in the %processor column for FCPX jumps rapidly over 100% and reaches more than 200% ??? What the **** is that ?
    200% or more is not strange. Remember that your mac has 4 cores (you say it's 3 months old, so I assume it is a new model), so 200% amounts to using 2 of these 4 cores to the max.
    Regarding the question of creating a new admin user: while it sits in the same system, it may help if the problem is caused by some user-specific preferences or settings. Not likely in your case, since you seem to have reinstalled from scratch, but still it is worth a try. It takes 5 minutes and may help pinpoint the problem.

  • Canon pixma pro 9500 having problems with my print out. colors are glazed and missing colors

    canon pixma pro 9500 having problems with my print out. colors are glazed and missing colors
    i have prfiled the mac and printer wiht colormunki and uplodated the profile sucessfully
    i set the printer to correct icc profile
    print out comes out same with glazed colors and missing tones/colors
    however when i use the same printer on windows and with light room, following same icc profile, colormunki calibrated profile, the print our are excellent.
    i have also tried using printer manage profile using the Mac and Aperture and get same poor prints
    can  you please assist and thanks

    I've a Pro9000 and also use Colormunki successfully.
    When I use Colormunki, I calibrate both of my monitors and the printer/paper combination. Colormunki saves the generated profiles to the correct places -- I don't load or change any profiles after that as that would mess-up what the Colormunki had just done for me, and this would likely mess-up the prints.
    Though I double-check the settings in the print dialogue, the choice for the printer handling things is already grayed-out. Colorsync handles it all just fine.

  • Have to re install elements 11 & premiere elements 11. cause problem with upgrade windows 8.0 to 8.1

    have to re install elements 11 & premiere elements 11. cause: problem with upgrade windows 8.0 to 8.1.    Lost all software and data.
    how to re install elements11. (downloads purchased in your store 2013-05)
    [email protected]

    have to re install elements 11 & premiere elements 11. cause: problem with upgrade windows 8.0 to 8.1.    Lost all software and data.
    how to re install elements11. (downloads purchased in your store 2013-05)
    [email protected]

  • Will Premiere Pro CC work OK with Nvidia GeForce GTX 765M?

    Will Premiere Pro CC work OK with Nvidia GeForce GTX 765M?

    This laptop I am on right vnow has a n nVidai GTX 765M and it works beautifully on Premiere CS6, CC and CC 2014.  You do have to add it to the Adobe file "cuda_supported_cards.txt file or simp[ly delete it.  I hope you know that you have to be plugged in to the AC line to successfully what to edit with a laptop.  Also you can improve the GPU performance if you reset the memory clock on the GPU to 1500 MHz from the default 1000 MHz.  It is because nVidia.slows down the clock to conserve battery.  If you register on the site you can see my results on our Premiere Pro BenchMark (PPBM) site.

  • Problem exporting Premiere Pro CS5.5 projects with still photos and h264 video

    I'm a longtime Final Cut Pro user and evaluating Premiere Pro for my workplace before making the switch. I have been running into several problems when I try to export raw h264 video from a Canon 5D combined with still images on a Macbook Pro. Either I receive an error in Premiere Pro saying, "Error compiling movie. Unknown error." or Adobe Media Encoder appears to continue exporting (the time elapsed bar continues to move) even though the time remaining stays frozen once it hits a photo it doesn't like. It's not always the same photo.
    I've spent several days trying to troubleshoot the issue, including batch resizing all photos to 1920 wide (to match the video settings), and it hasn't work. The sequence is currently set to render in ProRes 422. I've also tried HDV 1080p30 and MPEG-4. I cannot find any consistency with the errors. Occasionally an export will work, but every couple still photos will look like green static. I've also tried batch converting the photos in Photoshop to PNG and GIF without any luck. I'd include my default export settings but I've pretty much tried it all. I'm just trying to figure out what's causing the error since the message is very vague.
    Couple other notes:
    There's plenty hard drive space available for export
    I can export the DSLR video (h264, 1080p30) without still photos no problem
    I can edit the same still photos and video in Final Cut with no problem
    I have the same problem with auto-save on and off
    I tried re-installing production premium, deleting the preference files and cleaning the media cache - no luck. I also tried exporting under a different user account and it wouldn't work.
    This is driving absolutely crazy. I'm affraid to use PP on deadline because I don't see any issues until it's time to export. Any ideas would be greatly appreciated. Thanks!
    - McKenna

    Thanks Todd. Your questions were actually very helpful. I'm using a Macbook Pro with an Intel Core i7 processor and NVIDIA GeForce GT 330M graphics card. I'm running OS 10.6.8 and have the latest updates installed.
    When I disabled the GPU acceleration, I was able to render and export without a problem. The problem only occured when using the GPU acceleration and mixing h264 with still photos. It also affected both rendered previews and the final export. I'm assuming its a support issue with the graphics cards, but it would be great if you had any other ideas. I appreciate your help.

  • Need help with Premiere Pro CS6 playback problem

    Can somebody help me please? My premiere pro cs6 does not play plenty video in the time line for editing irrespective of using fast 64 bit, intel core i7, 16gb ram pc. Please what could I use to make it more stronger?
    Edited by: Kevin Monahan
    Reason: Changed title for better search ability.

    More information needed for someone to help... please click below and provide the requested information
    -Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
    Exactly what is INSIDE the video you are editing?
    Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
    Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

  • Premiere Pro CC import problem only with last .VOB file

    When I import .VOB files from any DVD into Premiere Pro CC, the last .VOB always cut picture from both sides. When I click to see properties of the file (in Bin panel) it shows me that image size is 540 x 576 instead of 720 x 576. The video isn't shrunken but cut off. I got two black bars on both sides of the screen (in Premiere Pro CC). That wasn't happened with CS6 and now it happens always and only with last .VOB file. All other files from same VIDEO_TS folder are imported correctly. When I convert that last .VOB to .avi or any other format everything is OK. Any suggestions?

    Yes it works, but I have no time to convert file every time I need something archived that way. I used that method years ago, and if I'm not wrong we are progressing a little Most of today options you have in Premiere 5 (maybe even in earlier versions; I'm using it from version 5.1) and it worked. So if you think like that, why we need version 7.2.1 ? Actually this is 14.2.1 version if you count from version 1 back in 1991.
    It's not about to manage, it's about to have what you pay for, it's about to speed up the process.
    Thank you anyway for your comment

  • Premiere Pro CS6 and CC with bad quality and incorrect colors in output video

    Hi everyone!
    I'm frustrated with my results after exporting a video with Adobe Premiere Pro (both CS6 and CC).
    The color of the video output is slightly different to the original file (i've checked if it was a problem with my video player, but no, i've tested the video with WMP and others with no success).
    Also the video quality is a little bad compared to the original file (i even tried to use frame blending once).
    Notice that i'm not using any effects or anything alike, and i'm a begginer in video editing.
    These are the parameters from the original video (made by Media Info software):
    Format                              
    : MPEG-4
    Format profile                      
    : Base Media
    Codec ID                            
    : isom
    File size                           
    : 1.70 GiB
    Duration                            
    : 1h 35mn
    Overall bit rate mode               
    : Variable
    Overall bit rate                    
    : 2 540 Kbps
    Encoded date                        
    : UTC 2012-12-06 21:47:27
    Tagged date                         
    : UTC 2012-12-06 21:47:27
    Video
    ID                                  
    : 1
    Format                              
    : AVC
    Format/Info                         
    : Advanced Video Codec
    Format profile                      
    : [email protected]
    Format settings, CABAC              
    : Yes
    Format settings, ReFrames           
    : 4 frames
    Codec ID                            
    : avc1
    Codec ID/Info                       
    : Advanced Video Coding
    Duration                            
    : 1h 35mn
    Bit rate                            
    : 2 246 Kbps
    Maximum bit rate                    
    : 33.7 Mbps
    Width                               
    : 1 920 pixels
    Height                              
    : 816 pixels
    Display aspect ratio                
    : 2.35:1
    Frame rate mode                     
    : Constant
    Frame rate                          
    : 23.976 fps
    Color space                         
    : YUV
    Chroma subsampling                  
    : 4:2:0
    Bit depth                           
    : 8 bits
    Scan type                           
    : Progressive
    Bits/(Pixel*Frame)                  
    : 0.060
    Stream size                         
    : 1.50 GiB (88%)
    Title                               
    : Video
    Writing library                     
    : x264 core 128 r2216 198a7ea
    Encoding settings                   
    : cabac=1 / ref=3 / deblock=1:1:1 / analyse=0x3:0x133 / me=umh / subme=10 / psy=1 / psy_rd=0.40:0.00 / mixed_ref=1 / me_range=24 / chroma_me=1 / trellis=2 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=-2 / threads=12 / lookahead_threads=2 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / bluray_compat=0 / constrained_intra=0 / bframes=3 / b_pyramid=2 / b_adapt=2 / b_bias=0 / direct=3 / weightb=1 / open_gop=0 / weightp=2 / keyint=250 / keyint_min=23 / scenecut=40 / intra_refresh=0 / rc_lookahead=60 / rc=2pass / mbtree=1 / bitrate=2246 / ratetol=1.0 / qcomp=0.60 / qpmin=0 / qpmax=69 / qpstep=4 / cplxblur=20.0 / qblur=0.5 / vbv_maxrate=25000 / vbv_bufsize=25000 / nal_hrd=none / ip_ratio=1.40 / aq=1:0.60
    Encoded date                        
    : UTC 2012-12-06 21:47:27
    Tagged date                         
    : UTC 2012-12-06 21:48:02
    I'm exporting the video using almost the same parameters from the original file.
    Here's a screen shot of my settings in Premiere:
    As you can see in the printscreen, the settings only differ from the original file parameters in the bit rate (which i raised a little),
    the TV standard (which i have no ideia what it changes), the level of H.264 (which i raised from 4.0 to 4.1, 5.0 and 5.1), and the bit rate encoding (which i've tried using CBR, VBR 1, and VBR 2).
    Just for my curiosity...why these numbers in orange are so extensive? I mean, the original video is only 01:35:30:06 in final output (which is correct).
    Notice that i do not use key frame distance (as i don't know what it does).
    If i'm doing something wrong, please tell me.

    Well if i do that, the video will raise up GBs larger (and that is really bad).
    Why is it really bad?
    Its a fact of digital  life. High datarate = quality.
    example ...even the Youtube preset is in the 8mpbs area.
    ...and you are exporting 1 hr 35mins of media.

  • Premiere Pro CC 2014 Crashing with rendering, freezing system, and more

    Hello,
    I'm having some serious issues with Premiere pro on my late 2013 iMac.
    OSX 10.9.5
    3.2GHz Intel Core i5
    16GB 1600 MHz DDR3
    NVIDIA FeForce GT 755M  1024MB
    I'm working in 1920x1080 23.976fps. Media files are from sony FS700 .MTS and Cannon 5DmkIII .mov
    Multiple times per day, PP crashes on me. It all started when I was getting really choppy playback which would be accompanied by this error message:
    A Low Level Exception has occurred in ImporterMPEG (Importer)
    This would soon after lead to the program freezing and me having to force quit the program. After contacting Adobe the first time about this persistent issue, the tech explained to me that it was a "Memory Leak" issue and that there was nothing that could be done. After the support team member ended our chat online before helping me solve my issue, I called support. I provided my case number and this person picked up where the helplessly left me and did the typical Adobe one fix all: He went into the hidden library and cleared all of my preferences, removed any third party plugins, and cleared the files in the root applications Adobe folder, renamed a folder "Adobe.Old" etc.
    As I explained to the support team member on the phone, this is not a solution but rather a bandaid until it happens again.
    Low and behold it has happened again. This time the support team member had me create a new System Administrator account on my computer thinking that there was a permissions problem with my other account which was conflicting with PPCC2014. While this was a major pain to switch between the new account and any other program that I had set up for day to day work, it allowed me to continue editing and at least (at a less efficient rate) get things done.
    Now, while using my new System Administrator account, I am getting terrible crashes that not only stall the program, but force me to hard re-boot my computer. These crashes are accompanied by a terrifying looking screen that I was only able to capture once.
    They've only become more intimidating as now I cant even see the program when this happens, but this is the only screen capture that did not turn out completely black.
    I'm looking to see if anyone has had any extreme issues like this and if so how they were able to fix it. I've now spent 6+ hours with support and after the last one was told I would receive a personal email follow up by the end of the day (never happened) to take further actions based on the performance after the new account creation.
    I need help. Now.
    -John

    Hi John,
    First of all, try this: Re: A low level exception occured in: Importer MPEG (Importer)
    Next, make sure that if you updated OS X to 10.9.x, or later, you must check the following each time you update: Premiere Pro CC, CC 2014, or 2014.1 freezing on startup or crashing while working (Mac OS X 10.9, and later)
    Other things to try:
    Sign out from Creative Cloud, restart Premiere Pro, then sign in
    Update any GPU drivers
    Trash preferences
    Delete media cache
    Remove plug-ins
    Repair permissions
    Disconnect any third party hardware
    Remove QT components from Mac HD > Library > QuickTime
    If you have a CUDA GPU, ensure that the Mercury Playback Engine is set to CUDA, not OpenCL
    Disable App Nap
    Reboot
    Report back if anything here worked for you.
    Thanks,
    Kevin

  • Premiere Pro CS4 export problem

    I am a new user of PP CS4 and I have created a short 2 1/2 minute clip with no problems.
    I have selected all the appropriate setting as per Adobe PP CS4 "Classroom In A Book" instructions.
    Exporting the clip as a MPEG2-DVD, NTSC 720x480, 29.97 Drop Frame Video.
    Main Concept MPEG Video, Variable Bit Rate.
    However, when I go to export I get the following error everytime:
    Adobe Media Encoder CS4 quit unexpectedly.
    Here are the details of the error report.
    Process:         Adobe Media Encoder CS4 [242]
    Path:            /Applications/Adobe Media Encoder CS4/Adobe Media Encoder CS4.app/Contents/MacOS/Adobe Media Encoder CS4
    Identifier:      Adobe Media Encoder CS4
    Version:         ??? (???)
    Code Type:       X86 (Native)
    Parent Process:  Adobe Premiere Pro CS4 [202]
    Date/Time:       2009-11-14 15:13:02.554 -0800
    OS Version:      Mac OS X 10.6.2 (10C540)
    Report Version:  6
    Interval Since Last Report:          1206 sec
    Crashes Since Last Report:           1
    Per-App Crashes Since Last Report:   1
    Anonymous UUID:                      B5DD95EC-13C1-4BA5-819F-22AA7BBBB3C8
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Crashed Thread:  0
    Dyld Error Message:
      Library not loaded: @executable_path/../Frameworks/LogSession.framework/Versions/A/LogSession
      Referenced from: /Applications/Adobe Media Encoder CS4/Adobe Media Encoder CS4.app/Contents/MacOS/Adobe Media Encoder CS4
      Reason: image not found
    Model: iMac9,1, BootROM IM91.008D.B08, 2 processors, Intel Core 2 Duo, 3.06 GHz, 4 GB, SMC 1.37f3
    Graphics: NVIDIA GeForce GT 130, NVIDIA GeForce GT 130, PCIe, 512 MB
    Memory Module: global_name
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8E), Broadcom BCM43xx 1.0 (5.10.91.19)
    Bluetooth: Version 2.2.4f3, 2 service, 1 devices, 1 incoming serial ports
    Network Service: Ethernet, Ethernet, en0
    Serial ATA Device: WDC WD1001FALS-40K1B0, 931.51 GB
    Serial ATA Device: OPTIARC DVD RW AD-5670S
    USB Device: Built-in iSight, 0x05ac  (Apple Inc.), 0x8502, 0x24400000
    USB Device: Hub, 0x050d  (Belkin Corporation), 0x0237, 0x24300000
    USB Device: Blue Snowball, 0x074d, 0x0005, 0x24320000
    USB Device: Hewlett Packard ScanJet 5300C/5370C, 0x03f0  (Hewlett Packard), 0x0701, 0x24340000
    USB Device: Hub, 0x050d  (Belkin Corporation), 0x0237, 0x24310000
    USB Device: Keyboard Hub, 0x05ac  (Apple Inc.), 0x1006, 0x26400000
    USB Device: Apple Keyboard, 0x05ac  (Apple Inc.), 0x0220, 0x26420000
    USB Device: Apple Optical USB Mouse, 0x05ac  (Apple Inc.), 0x0304, 0x06200000
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x06100000
    USB Device: Bluetooth USB Host Controller, 0x05ac  (Apple Inc.), 0x8215, 0x06110000
    USB Device: IR Receiver, 0x05ac  (Apple Inc.), 0x8242, 0x04500000
    Can anyone help me with this?
    Richard

    Welcome to the forum.
    Looks like you are on an iMac. To help others help you, can you post the specs of your system?
    I was about to post links to a bunch of troubleshooting articles, but they were written for PC's so I dobut that any would apply here.
    With the important data, someone is very likely to see a potential problem and help you.
    In general terms, most problems sort out this way:
    System
    Assets
    Project/Sequence settings
    Those given, the exact detail will get you closer to resolution.
    Good luck,
    Hunt

Maybe you are looking for