Premiere pro will only exports 2 files Audio and Video

Hi i'm jared i have a serious problem premiere pro is exporting 2 file an audio and a video file I've tried to use multiplexing and it wouldn't work please help.

Yes that is correct: video files (mp4). They are not separate.
Just export and see what you got.
Start with a small segment of your timeline.

Similar Messages

When exporting to quicktime audio and video out of sync

i am trying to export a small four minute movie to quicktime. the movie plays back fine in the timeline but when i go to export to quicktime, some of the audio and video is out of sync and it semmingly looses a second every now and then. very wierd. the project plays back flawlessly in the timeline, but when i export to quicktime using quicktime conversion the above occours. any tips, suggestions would be greatly appreciated. thanks.
Mac Pro Mac OS X (10.4.9)

don't use quicktime conversion. use 'current settings',
x

Premiere pro will not import .mov files

Premiere pro CS3 running on Vista 64 bit will not import .mov files. After Effects CS4 has the same problem, it says I don't have the correct version of Quick Time installed. I'm using the 64 bit version 7.6.4 for Vista. Any help would be appreciated.

Welcome to the forum.
Now, what is inside that .MOV "wrapper?" This ARTICLE will give you some background on "wrappers." It is mainly written with .AVI in mind, but translates to most AV file formats, including .MOV.
Now, I use a lot of .MOV files and these are all done in the Animation CODEC. Never an issue for me.
One thing that might aid you is the US$30 upgrade/unlock key to QT Player Pro. It can Export as a bunch of useful formats/CODEC's. Depending on whether your footage is SD, or HD, you can Export most to formats that play perfectly with PrPro.
Good luck,
Hunt

Using the Premiere pro CC 2014 exported media file size is much larger than estimate, also is so much bigger than Premiere CS 6?

I used the preset H,264 Youtube 1080HD to export a video. The estimate size is 7308 MB {after I reduce the nitrate). The final size is 11.18 GB.
Why is so much different? Befor I Use the Premiere CS6 to export a simial size use the same format Is around 6GB.

First of all, the estimated file size just an estimate based chiefly on the combination of the bitrate and duration. The actual size can vary significantly, depending in large part on the amount of change from frame to frame throughout the video. For example, if you encode two clips of identical duration to exactly the same settings, the only difference being the nature of the content--say on is a talking head interview shot with the camera locked down on a tripod while the other is skateboarding footage that was shot handheld--the size of two resulting outputs files will be widely divergent.
As to the comparison between CS6 and CC2014, note that the settings for some presets have been changed. For instance, the h.264 YouTube 1080 presets went from 8Mbps to 16.

MacBook Pro will only last till 90% battery and then shuts down. Tried smc reset to no avail.

MacBook pro only lasts a few minutes on battery and then shuts down!

elgordo8251 wrote:
How long do these batteries usually last?
It varies. Some do not even last 1 year but others 4+ years.
Apple provides only 1year warranty.
Best.

8.1 Pro install now have no audio and video play

I have an older G60-443cl and changed out the HDD for a SDD. Installed a new version of Windows 8.1 Pro. Everything works but my audio and video. The audio drivers are installed and working properly (according to my system) but even on the speaker icon where you adjust the volume there is no sound not even the little beep when you change the volume. I went to my adminastrative tools and checked and the following is what i guess i should have:
Open windows Control Panel, open Administrative Tools and open Services. Check that the following services are all showing as Status= Started and Startup Type= Automatic
Audio Service
Multimedia Class Scheduler
Windows Audio
Windows Audio Endpoint Builder
I have all of the item but the top one Audio Service???? Help!!!!! Please!

Hi @L1215 ,
Welcome to the HP Forums!
It is a grand place to find answers and information!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that after changing the drive to a SSD and installing Windows 8.1 Pro you lost your audio. Drivers are showing as installed and working properly but you have not audio.
When I checked the driver page for your notebook I noticed that Windows 8.1 is not a supported Operating System. With this being said HP does not provide the drivers as it is an untested OS on your system. OEM's may and sometimes do alter drivers to perform correctly with your system.
Downloading or Updating Software and Drivers for HP Computers
Here is a link to No Sound from Speakers (Windows 8) to aid in overcoming this difficulty.
The best of luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

In elements 10 audio and video tracks loaded but appear to be blank

running windows 7 with elements premiere 10... i have my audio and video loaded in the session but the tracks, 2 video with audio and one audio only track, appear to have no info. they play, but i cant see the wave file image. i need to see the file and be able to zoom in so i can line it up for syncing. i had at least the audio showing up at first, but somehow that seemed to disappear now? how do i fix this?

sadworld4804
The wave representation that you seek is in the pek file of the cfa and pek set for the audio. Did you let your audio go to completion for audio conforming before starting any work on the project?
But, I am suspecting something else which is easy to remedy and hope this is it.
1. Look to the left where it says track name, Audio 1, to see a speaker icon. You can toggle that to get 2 different "Audio Track Display Styles"
and
Please let us know if that was the issue, that is, the toggle choice for the "Audio Track Display Style".
Thanks.
ATR

My video's have codec but premiere pro see only audio file

Hi,
My Ematic EVH528 camera capture 1080p videos and I watch my pc with xvid codec. But premiere pro see only audio file.
I need a solution. Help me please.

Read Tweakers Page - Video Codecs and then convert to an editable format.

I am trying to export a video from Premiere Pro. I have both audio and video checked and the sequence is active but only the audio exports. There is no video at all. Can anyone tell me how to get the video to export. It was working fine until today.

Premiere Pro CC has been working fine until today. I have completed my sequence and it is active. I have both audio and video checked when I am exporting using H.264 with Match Source Hi bitrate. I am choosing entire sequence. The audio exports but the video and title does not. Can anyone tell me how to troubleshoot this so I can complete this project? Please!

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

Premiere Pro CC won't import ANY audio file, be it an mp3 or part of an mp4 video (or other formats)

Any audio or video file I drop in to premiere will almost immediately pop up with the window
Audio Conforming Error
Error compiling movie.
Unknown error.
When I check the error/event log (little red X in the bottom corner) that window says:
"11/21/14 09:47:28 A disk error occurred while attempting to access the following files:
\\ipsse01\home$\myusername\AppData\Roaming\Adobe\Common\Media Cache Files\filename.mp3 44100.cfa"
(The actual file is on my desktop)
This happens with everything, even the stock audio files Windows comes with in the "Sample Music" folder, I tried those too to no avail.
I'm at a complete loss. I'm new to premiere pro but these are generic file formats so I don't think the issue is with the file. I haven't tried to reinstall because I'd have to go to our one network administrator/IT person (who also is the accountant for the company) so she can enter the admin user name/password in the pop up box, and she's often so busy. I'm trying to avoid bugging her if I don't need to (which unfortunately I tend to still have to do a lot)
For reference I'm running Win7 Professional 64-bit, 8GB RAM, and an i7-4610M CPU @ 3.00 GHz.

Hi Neila,
Neila@IPSUMM wrote:
Thanks for responding, but I work for a very small company and since I'm the only one who needs CC, I have the personal version installed.
Also this appears to be a blanket issue with all audio and video file formats, thus not likely a codec issue since the files I've tried so far should be covered by premiere's compatibility, the even play in windows media player with no issue.
Video itself plays fine, but any audio attached to a video, or just plain audio files will not import no matter what I try.
Sorry my info didn't help.
Two things to try.
Create a brand new project and test if you can import the problematic files.
If that does not work, change the name of the folder that contains your media files. Then try to import.
Let us know what happens.
Thanks,
Kevin

Premiere Pro CC: audio and video is out of sync after export

Hi folks! I downloaded trial version of Adobe Premiere Pro CC. Captured gameplay with bandicam in Motion Jpeg Format (as advised) 30 fps and made a 40 minutes lenght clip. But there is an issue: in my project audio is synchronized with video, but when i export - it's lost (and i think to further we watch video, the bigger is the synch gape between audio and video, in increases gradually). I tried various formats, tried to use option "delete rendered files" prior to export, tried "match source" option, tried to choose various drives for exporting - nothing helps.
Help, how to solve this problem?

Handbrake is a free-download program that takes variable-frame-rate footage and converts it to constant frame-rate. VFR to CFR, if you will.
Going back to your reply to my first post, you noted there had been some kind of "hardlimit" to 30fps that you hadn't chosen. I'm guessing that would have made this track CFR, and what you've got instead is VFR. So you might try recording another bit after selecting that setting to hardlimit the frame-rate, and see if it works better through PrPro to export.
Next ... so, you've got a 30fps probably VFR video track, and it appears a WAV file is your audio ... was that produced by the Bandicam program while it was recording your program? Or is it from another source and you pasted it into your sequence?
Neil

Why will Premiere Pro CS6 only import to mpeg format?

Hello, so I've been using Premiere Pro CS6 now for only a few months and when I imported (using "capture" or F5) and tested some footage from a HDV camera using a miniDV tape, I noticed that Premiere Pro would only import to mpeg format. I looked up ways to change this but couldn't find anything. So in short I'm asking if there is a way to change import format so that whenever I do import from DV tape, it isn't mpeg?
Thanks!

...footage from a HDV camera...
...only import to mpeg format.
HDV capture will always be mpeg.
whenever I do import from DV tape, it isn't mpeg?
DV capture will be .avi (pc) or .mov (mac).
note:
Capture from tape, import file based media.
Capturing and digitizing
Also, what's the problem with mpeg?
Why are you determined to change it?

Premiere pro cs5 : audio and video sync issue with .aiff file format

I am using premiere pro cs5 on MAC and facing issue with audio and video sync using .AIFF file format for audio unable to make it work.
Is there any solution to this issue or any work around?
Thanks in advance.
Vinay

Hi,
hmmm, well that settles that...
Here's a link to info about an open source free program to convert....for mac
http://www.ehow.com/how_5072563_convert-files-wav-files-freeware.html
Good luck
Rod

Will Premiere Pro CC support Cinema DNG files?

Will Premiere Pro CC support Cinema DNG files?

That would be nice, but my guess is that if support was built in, Adobe would have made mention of it as a new feature.
Given that Blackmagic is releasing a $1000 DC camera that records CinemaDNG to SD cards, it sure would be nice if PP cold work with them natively. People, please keep filing that feature request.
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Using Premiere Pro CS3 When exporting as flash file poor picture quality

I'm using Premiere Pro CS3. I shoot green screen in HDV and work in 1440 x 1080. I have been capturing files in Premiere and sending them to Serious Magic Ulta 2. I use this program for keying and adding virtual backgrounds. I save these files as avi. with a resolution of 1440 X 1080. I then bring them back into Premiere Pro for final edit. When I export these video's encoded as mpeg2 theyplay very clear. I am now trying to export as flv. with alpha channel background and the resolution is poor. I working on the transparent background with walk on spokespersons that overlay the HTML page. When In try to play them on my computer the adobe media player is what comes up. I have downloaded flash player but it doesn't select it to play the video. I'm running windows Vista Business platform. What am I doing wrong.

Thanks for the reply.
The capture and editing have already been done in 1440 X 1080. Should I use this resolution rather than trying to bump it up to 1920 X 1080.
Thanks
Bill Bennett
Date: Fri, 2 Sep 2011 07:33:04 -0600
From: [email protected]
To: [email protected]
Subject: Using Premiere Pro CS3 When exporting as flash file poor picture quality
Computer playback generally prefers square pixels. Make sure to set your output resolution to 1920 x 1080 using a Pixel Aspect Ratio (PAR) of 1.0 or Square.
See if that helps.
>

Premiere pro will only exports 2 files Audio and Video

Similar Messages

Maybe you are looking for