Premiere rendering text with question mark

my Premiere rendering text with question mark. it looks fine at first but then it changes. Ow! the text file is a after effects files that I opened up in premiere.

thats okay i found the problem. it was the text in after effects. the box around the text was to small.

Similar Messages

When i open emails, the text is replaced with question marks and boxes

i have a macbook pro and when i open email attatchments which are mainly bodys of text, the text is replaced with question marks in boxes, any ideas as to how to help this or even fix it completely!?

It means the text is a font not supported by whatever you are using

Every once in a while when I open my mail or a page I get nothing but strange lines of symbols. Many of the symbols are black triangles with question marks in the center. I completely reset it like new, but problem still exists

Every once in a while when I open my mail or open a page I get lines of strange symbols like black triangles with question marks in the center. I have reset the ipad2 to new condition but the problem still exists.

A reset does not make tthe iPad "like new."
First, let's ensure that we agree on just what is a Reset...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

Blue icon with question mark instead of image in email

Sometimes I get a blue icon with question mark instead of image in email, when viewing in Apple Mail Program.
Does anyone know why?????

I'm asking your thread get redirected to the proper forum. Please read this tip on how to post on Discussions for future threads:
http://discussions.apple.com/thread.jspa?threadID=1574700
Is this issue with Tiger or Leopard? Your profile indicates you have a machine with Tiger, yet your signature of your post says you have Leopard.
Also, there is no such thing as a Powerbook Pro. Read the text under the screen to tell us exactly which model you have. MacBook Pro is the name given to Macs that are for the pro lineup of notebooks once Apple shifted to the Intel CPU.
Message was edited by: a brody

I upgraded to Keynote 6.2.2 and deleted the old Keynote application. Now all the content is gone and replaced with question marks

Lost all content and now my lectures are reduced to slides with some text and question marks were images/content used to be. Incredibly frustrating. How can I get my content back?

Re-install iWorks 09 and you will be up and running again.

Dashboard - blue cubes with question marks?

When I display dashboard, the flight tracker widget has blue squares with question marks over the three drop down menus. Is there a way to reinstall this widget or dashboard to fix this?
MacBook Pro 2.16GHz Intel Core Duo Mac OS X (10.4.8)

Welcome to Apple Discussions!
Dashboard Widgets are based on the same Javascript rendering engine that Safari has. As a result, things that would cause these blue squares to appear in Safari could cause that to happen on the widget. Three of the most common causes are server traffic, uninstalled or damaged web browser plugins (such as Flash), and images that no longer exist on the server. I would contact the developer of the widget which you can find clicking the italic 'i' at the corner and find out what servers they refer to in order to get images, and then run a traceroute to the said server. Traceroute is a function in your Network Utility. If you get many asterisks in the middle of the route, that means your internet service provider has trouble peering with the widget's image server's internet provider. Asterisks at your end usually indicate a firewall that could be blocking the images from getting through. Sometimes internet service providers put up a firewall to protect their own customers. If you are behind a router, a port may need to be opened on the router which the developer of the widget can inform you more about.

Flashing Folder with Question Mark after Trackpad 1.0 Update

My machine won't boot after installing this update. I get the flashing folder with question mark and can't even boot from the Install DVD either... I just get a frozen spinney wheel at the Apple Logo screen. I've tried resetting the PRAM and everything else that a Googling of the problem suggests. This update bricked my Macbook!!!!
Anybody else having this problem? Anybody have any suggestions or am I stuck with going to see a "genius"?

I've not seen any other posts about it causing problems, worked fine here. You've tried resetting the PRAM the only other thing you could try is:
Boot holding down Apple/S and don't let go until you see scrolling text.
When that stops and you see a root#: prompt enter
fsck -fy
Let it run through all the checks and repairs.
If it fails first time, at any time, or finds and fixes a fault - run the command again and keep doing so (some fixes can take several passes) until it says "Appears to be OK" then enter
reboot

I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

Hold down the Option key while you boot your Mac. Then, it should show you a selection of devices. Click your flash drive and it will boot from that.

Hard drive crash? Folder with question mark

Hi everyone! I had problems with my macbook pro (early 2013). Last week, it slowed down suddenly and the laptop heats up during sleep. Then the hard drive recently crashed, at least I thought it crashed after it showed the folder with question mark during startup and did not show my old hard disk drive. Now I bought a 1TB WD mainstream hard drive disk, unfortunately it does not detect it in the internet recovery (disk utility). Now my question is, Do I have to do something with the hard drive first for my laptop to detect it? Like formatting it? The box said that it is compatible with mac OSx Lion, but my internet recovery lets me install Mountain Lion only. Is that the problem? or is the problem internal like the cable that connects the hard drive to the logic board?

That depends on the type of drive you have. If it is a standard external drive (in an enclosure) you can connect the drive with a USB cable.
If it is a bare drive like this:
You will have to put it an enclosure and get a usb cable. External drive enclosure are < $10. They come in two sizes, 2.5" and 3.5". Buy one that's correct for your drive. http://www.amazon.ca/MOGOI-Enclosure-External--Silver-Accessory/dp/B00HC107R6/re f=sr_1_5?ie=UTF8&qid=1404755872&sr=8-5&keywords=disk+enclosure

MacBook Pro flashes file folder with question mark and startup manager will not run

My son's MacBook Pro won't boot (gets the flashing file folder with question mark). When I try to open startup manager (holding "option" key during boot does not do it). Other posts suggest inserting the install disk, but I am pretty sure that for Lion, there was no disk, it was just off the website through the App Store. Any further suggestions?

Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Not solved with Blinking Folder with Question Mark after Erasing Hard Drive

Before asking, I found someone had asked exact the same question, but that was actually an unsolved thread.
Re: Blinking Folder with Question Mark after Erasing Hard Drive to try to restore to Factory Settings
Level 1(0 points)sdc3gJul 5, 2013 6:24 PM Re: Blinking Folder with Question Mark after Erasing Hard Drive to try to restore to Factory Settings
Re: Blinking Folder with Question Mark after Erasing Hard Drive to try to restore to Factory Settings
in response to Niel
Thanks for the reply, held command+R again and it is trying to pick up WiFi, but it's not picking up my network and won't accept the password even when I try to put it in manually. Any thoughts on that?
Me too had tried the command+R and failed to manually connect to my network. Can anyone help?

Well, it was solved. I shifted to other place and tried other WIFis. One of the WiFi had the 2002f problem and another was fine, so the reinstall worked smoothly eventually.
On the apple support page it says that Supported network configurations and protocols includs both WPA/WPA2, not matter what they are, but it might not be true.

Frequent startup with question mark folder icon--a diagnostic challange!!!

I recently obtained a 500 mhz G4 Cube; I transplanted memory, video board, video riser board, and DVD/CD drive from my old (dead) 450mhz G4 Cube (logicboard and DC-DC board were fried) to the 500 mhz Cube AND I added a Western Digital 80gb hard drive. The problem involves frequent startups with the question mark folder (Mac OS logo alternates with question mark).; Eventually the system folder is found and OS 10.4.11 starts up--sometimes in 20 seconds and sometimes in 3, 4, 5 minutes or longer..........I have tried 2 brand new batteries after numerous PRAM (via keyboard) and CUDA resets (depressing the CUDA button on the motherboard just once and then installing the new battery). The battery terminals in the Cube look perfect--no corrosion. With the new battery, startups were fine for a day but now 4 out of 5 times, I will get the question mark folder. Using Disc Utility, I fixed any errant permissions and the hard drive checks out with zero problems. Once running, the Cube works great, but these startups are maddening. One other issue; if I start up with the G4 Cube 9.1 installation disc, the install program DOES NOT recognize any bootable discs; whilst starting up using the Tiger Upgrade install disc, my 2 bootable discs (partitions of my Western Dig. hard drive) ARE recognized. Any ideas would be greatly welcome!!

I believe I have solved the problem regarding the question mark startup---> after rechecking all cable connections to HD, OD, and logic board, I revisited the jumper setup on the HD; it turns out that I set the HD up to be the MASTER, but what I should have done was set the HD to be the MASTER with attached SLAVE. Since reconfiguring the jumper, all startups have so far been normal. Also, I did install OS 9 drivers, but I the OS 9.1 install disc still does not recognized my 5 gig partition when starting up from the CD; this is minor in retrospect as I can still use the classic mode with a earlier version of OSX that does not hog so much disc space.

Switched on my imac 24inch intel based and all I get on screen is a folder with question mark flashing,I had backup on external hard drive but when I try to reinstall it can not find my mac hard drive

Hi when I started my intel based imac this morning all I am getting is a folder with question mark in the middle flashing,I have external hard drive with backup,but when run disc utilities it does not show my mac hard drive.hope someone can help.(it's running mountain lion, well it was)

Try starting up your Mac while holding down the Option key. That should prompt the Startup Manager window where you can select the startup disk then click Restart.
The question mark folder indicates your Mac cannot find a system folder to boot from.
A flashing question mark appears when you start your Mac

Hi . i have Intel based iMac. i erased whole hard disk. now it flashes folder icon with question mark... i have no internet or orginal dvd.... i want to clean install any mac osx..friend got mac book pro and osx in dmg format . what are my options?

hi . i have Intel based iMac. i erased whole hard disk. now it flashes folder icon with question mark... i have no internet or orginal dvd.... i want to clean install any mac osx..friend got mac book pro and osx in dmg format . what are my options?

On your friend's computer with an internet connection, log into the Mac App Store with your ID and download Yosemite from the Purchases section of the Mac App Store. The make a bootable USB install media using
http://liondiskmaker.com/
Then boot from that on your computer and install
You need an internet connection to install via Recovery mode

Attachments in mail show up as squares with question marks

When I open the Mail program and the email has an attachment the attachment shows up as squares with question marks. Any help would be appreciated. Thanks

Take your screenshot, then reply to this message and click the camera icon in the editing window. Click the "Choose File" button and select the screenshot. If you don't know how to take a screenshot, search for that term in the built-in help.

Premiere rendering text with question mark

Similar Messages

Maybe you are looking for