Premiere - screen flicker when burning to DVD but no other formats

In adobe premiere i can share a video to MPEG or some other format perfectly (and you tube) but when i burn the same project to DVD i get frame flicker especially on fast moving image

I have now amended the field settings of the affected clips and burned a new DVD with each option - one version with reversed field applied to all affected clips and another with de-interleaved box checked (but no reverse field). Both look fine on preview or MPEG output but both still 'stutter' on the DVD (possibly worse in the case of de-interleaved option)
I can also confirm for definite that is is only time-stretched clips that are suffering this problem on the DVD - the other clips are all perfect
my apologies for send ing the worng file infoi - please see below the mediainfo for the source file file from my camera and below that the AVI file
CAMERA FILE
General
ID                                       : 1 (0x1)
Complete name                            : C:\Users\Richard\Videos\Movies\Richards 50th Birthday\00014.MTS
Format                                   : BDAV
Format/Info                              : Blu-ray Video
File size                                : 44.8 MiB
Duration                                 : 14s 335ms
Overall bit rate mode                    : Variable
Overall bit rate                         : 26.2 Mbps
Maximum Overall bit rate                 : 28.0 Mbps
AVI FILE PROPERTIES
General
Complete name                            : E:\c1969-1-01.avi
Format                                   : AVI
Format/Info                              : Audio Video Interleave
Format profile                           : OpenDML
File size                                : 2.68 GiB
Duration                                 : 21mn 26s
Overall bit rate                         : 17.9 Mbps
Video
ID                                       : 0
Format                                   : JPEG
Codec ID                                 : MJPG
Duration                                 : 21mn 26s
Bit rate                                 : 16.3 Mbps
Width                                    : 1 280 pixels
Height                                   : 720 pixels
Display aspect ratio                     : 16:9
Frame rate                               : 16.000 fps
Color space                              : YUV
Chroma subsampling                       : 4:2:2
Bit depth                                : 8 bits
Scan type                                : Interlaced
Scan order                               : Top Field First
Compression mode                         : Lossy
Bits/(Pixel*Frame)                       : 1.105
Stream size                              : 2.44 GiB (91%)
Audio
ID                                       : 1
Format                                   : PCM
Format settings, Endianness              : Little
Format settings, Sign                    : Signed
Codec ID                                 : 1
Duration                                 : 21mn 26s
Bit rate mode                            : Constant
Bit rate                                 : 1 536 Kbps
Channel(s)                               : 2 channels
Sampling rate                            : 48.0 KHz
Bit depth                                : 16 bits
Stream size                              : 236 MiB (9%)
Alignment                                : Aligned on interleaves
Interleave, duration                     : 63 ms (1.00 video frame)
Interleave, preload duration             : 62 ms
Video
ID                                       : 4113 (0x1011)
Menu ID                                  : 1 (0x1)
Format                                   : AVC
Format/Info                              : Advanced Video Codec
Format profile                           : [email protected]
Format settings, CABAC                   : Yes
Format settings, ReFrames                : 4 frames
Format settings, GOP                     : M=3, N=24
Codec ID                                 : 27
Duration                                 : 14s 360ms
Bit rate mode                            : Variable
Bit rate                                 : 24.9 Mbps
Maximum bit rate                         : 26.0 Mbps
Width                                    : 1 920 pixels
Height                                   : 1 080 pixels
Display aspect ratio                     : 16:9
Frame rate                               : 50.000 fps
Color space                              : YUV
Chroma subsampling                       : 4:2:0
Bit depth                                : 8 bits
Scan type                                : Progressive
Bits/(Pixel*Frame)                       : 0.240
Stream size                              : 42.7 MiB (95%)
Audio
ID                                       : 4352 (0x1100)
Menu ID                                  : 1 (0x1)
Format                                   : AC-3
Format/Info                              : Audio Coding 3
Mode extension                           : CM (complete main)
Format settings, Endianness              : Big
Codec ID                                 : 129
Duration                                 : 14s 432ms
Bit rate mode                            : Constant
Bit rate                                 : 256 Kbps
Channel(s)                               : 2 channels
Channel positions                        : Front: L R
Sampling rate                            : 48.0 KHz
Bit depth                                : 16 bits
Compression mode                         : Lossy
Delay relative to video                  : -40ms
Stream size                              : 451 KiB (1%)
Text
ID                                       : 4608 (0x1200)
Menu ID                                  : 1 (0x1)
Format                                   : PGS
Codec ID                                 : 144
Duration                                 : 13s 856ms
Delay relative to video                  : -40ms

Similar Messages

My screen freezes when reading e-mails but not other applications.

Does anyone know the reason for my screen freezing when reading e-mails bot not in other applications?

Hi Go toSettings Email Accounts Delete Email Account that's not working then Re Add Account back again Do this with all Accounts you have problems with. Cheers Brian

Premiere elements crashes when burning a DVD

I'm trying to burn a slide show I've created. It's a mixture of photoshop elements photo slideshow and edited videos, about 30 minutes long.
But every time I try and burn it to DVD, premiere elements crashes. It generally gets to about 30% through the encoding media stage.
Has anyone else come across this problem? I thought it might be related to virtual memory, but I've increased this, and it's not had an effect. I'm running it on a laptop with 4Gb RAM, so RAM shouldn't hopefully be a problem.
When trying to burn, i've also tried to reduce the quality so instead of using "Fit contents to available space" I've reduced the bit rate down to 5Mbps so the space required is just over 1.2Gb (it was originally about 2Gb).
Has anyone any suggestions as to how to resolve / diagnose this problem.
I've burnt several DVDs before without any problems, although they were mainly just photos
Thanks in advance
J

The easiest way to do this is with Photoshop (PS). I'm certain that PSElements can do it well also, but do not know what might be different. This is for Photoshop.
Place copies of your files into a folder. I use copies because I do not want anything to happen to my originals and play it extra safe. Add a sub-folder. I name mine something like "Final_PSD's,) etc. In PS, I have a series of Actions, to re-size to my common video formats. They are named things like, NTSC_Wide, NTSC_4-3, etc. The Action is set to Open the files, then change the size to the appropriate dimensions and assign the correct PAR for that Project, such as my NTSC_4-3 gets a PAR of 0.9. The Action then does a Save_As. I keep .PSD's as .PSD's, but JPEG would work well too.
In PS, I go to File>Automate>Batch Process. This brings up a dialog screen, where I choose the Action that I want to run, NTSC-4-3 in this case. I direct the program to the Source Folder and the appropriate Destination Folder, my "Final_PSD's" in this case. If I have the sub-folder targeted for the Destination Folder, I leave the file naming conventions the same. I check Bypass Open command, as I do not need to see the work being done. Check over everything. Hit OK, and in a few minutes, I can re-size hundreds of files. Time will depend on one's system, and also on the size of the Target Files.
I feel that there WILL be differences in PSE, but someone else will have to fill in that info. It has also been pointed out that the freeware image processor and cataloging program Irfanview cand do batch re-sizing quite well. This might be an option. I do not use it for such, so I cannot comment.
Good luck,
Hunt

How can I increase resolution when burning a dvd with elements 11 premiere

How can I increase resolution when burning a dvd with elements 11 premiere
I am trying to generate a slide show DVD....the pictures on the TV are poor quality

Welcome to the forum.
As Steve points out, a DVD-Video is set in resolution, to 720 x 480 (for NTSC), in either Standard 4:3, or Widescreen 16:9. That is as good as it can get, and is not a limitation of PrE, but of the DVD-Video specs, which were written a long time ago.
The best that one can get is to play that DVD-Video on an up-rezzing DVD player, or most BD players, that also have up-rezzing, to an HD TV monitor. Those players have dedicated chips, JUST for up-rezzing.
Then, and per Peru Bob's questions, I attain the ultimate Still Images to DVD-Video, by doing my Scaling in Photoshop, and using either the Bicubic Sharper, or Bicubic Smoother Scaling algorithms. I Scale my Camera RAW Images to match my Project's Frame Size, and Crop, where necessary to match the Aspect Ratio of my Images, to the Aspect Ratio of the Project, i.e. if going to a 16:9 Widescreen, I will lose some pixels top and bottom, but I account for that, per my asesthetic.
Note: some PrE users insist that the Scaling in PrE is as good as Photoshop's, but my critical eyes point to using PS. Also, I do NOT use JPEG, which is a lossy, compressed format, and will Save_As PSD from Photoshop, for ultimate quality.
Good luck, and please let us know the pixel x pixel dimensions of your Images.
Hunt

Does anyone experienced bad quality when burning a DVD?

Does anyone experienced bad quality when burning a DVD?
Using OS 10.6.8 and Magiv Video in iDVD, I am having a hard time creating a decent DVD. The videos per se are fine, but the intro menu and menu text and images are extremely poor quality and hard to read. What is going on?

Hi my notes on this - might be of help
DVD quality
1. iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1)
iDVD 6 has the two last ones
• Professional Quality
(movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
• Best Performances
(movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
(movies + menus up to 120 min.) - slightly lower quality than above
About double on DL DVDs.
2. Video from
• FCE/P - Export out as full quality QuickTime.mov (not self-containing, no conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos and the Ken Burns effect NOT is used. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 or 09 or 11 are not meant to go to iDVD. Go via Media Browser and as Large (NOT HD or other resolutiona as result will suffer) or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly e.g. x4 or x1 (in iDVD’08 or 09 this can also be set)
This can also be done with Apple’s Disk Utilities application when burning from a DiskImage.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc). For SD-Video - if HD-material is used I guess that 4 to 5 times more would do.
5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. I use DVD-R (no +R or +/-RW) - DVD-R play’s on more and older DVD-Players
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
(I use JES_Deinterlacer to keep frame per sec. same from editing to the Video-DVD result.)
8. Don’t burn more than three DVDs at a time - but let the laser cool off for a while before next batch.
iDVD quality also depends on.
• DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
deliver anything better that this.
HD-DVD was a short-lived standard and it was only a few Toshiba DVD-players that could playback.
These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-Player.
Blu-Ray / BD can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
_ Roxio Toast™ 10 Pro incl. BD-component
_ BD disks and burner if full length movies are to be stored
_ BD-Player or PlayStation3 - to be able to playback
The BD-encoded DVDs can be play-backed IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx. 25Gb.
less than 5Gb and Your result will most probably not play.
• How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
• Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
• Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera record in = 100% to iDVD
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JES_Deinterlacer_3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are play-backed by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD’08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choice before Pro Quality)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
(x4 by some and may be even better)
2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
Region codes.
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes.
1 = US
2 = EU
unclemano wrote
What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
TO GET IT TO WORK SLIGHTLY FASTER
• Minimum of 25Gb free space on Start-Up hard disk
• No other programs running in BackGround e.g. Energy-Saver
• Don’t let HD spin down or be turned off (in Energy-Save)
• Move hard disks that are not to be used to Trash - To be disconnected/turned off
• Goto Spotlight and set the rest of them under Integrity (not to be scanned)
• Set screen-saver to a folder without any photo - then make an active corner (up right for me) and set
pointer to this - turns on screen saver - to show that it has nothing to show
Yours Bengt W

Screen flicker when dragging documents

Does anyone experince screen flicker when dragging files from the Finder to the Desktop?
Here's a short video showing the problem.

I am running Mountain Lion (OS X 10.8 (12A206j)) and just started to experience similar issues (see image below) When scrolling up or down a webpage. It happens randomly, and there are only a few applications open (Photoshop, Pages Safari). I have reset PRAM, but am not holding my breath on that...

Will stacks show in pic's when burning a dvd?

Hi all, just wanted to know if the stacks in my pic's will show when burning a dvd. When I fix red-eye or auto smart fix it shows the stacks on my pic's. I don't want the stacks to show when burning the pic's on a dvd.
Thanks, alot

> When I fix red-eye or auto smart fix it shows the stacks on my pic's
My guess is that what you are referring to as "stacks" is the icon superimposed on the thumbnail to show that this photo is part of a Version Set. This icon is present over the thumbnail, but it is not in the photo itself. No, it will not show on the photo file that is burned to a DVD.
You did an auto red-eye and an auto smart-fix. These create Version Sets where they save the file of your fixed photo separate from the original photo file so that your original is preserved.
I think my description answers Colin's question of "what do you mean by stacks showing?" If not, tell us what you did mean.
Then please do answer the question of specifically how you plan to Burn the DVD.
Barb O

When burning a DVD from Elements 13, it freezes at 90%

when burning a DVD in elements 13, it freezes at 90% and locks up elements until I cancel burn.

Jerry Jarrett
If you wish to pursue your question about burn to disc, then I would be glad for the opportunity to be of assistance.
The following would be my troubleshooting strategy and questions
1. What computer operating system is your Premiere Elements 13 running on?
2. Have you looked at the issue with and without the Intel HD Graphics 2000 and Higher preferences disabled
(See Edit Menu/Preferences/General)?
3. Where are you in Publish+Share/Disc/, DVD, AVCHD, or Blu-ray? And, what does the burn dialog's Quality Area
show for Space Required and Bitrate? What brand/type/capacity disc are you using?
4. Is the issue specific to one Timeline in one project? Or, is the problem there with another Timeline content and another
project.
I would prefer to see you sort out the burn to disc issue if possible because of the download problems associated with the 3rd party software
that is typically needed to obtain the disc product from the Premiere Elements VIDEO_TS, BDMV, or ISO Image. Excellent 3rd party software if you
can get it installed without a lot of companion garbage. Although how to have been described for the safest possible download and install, there
are no guarantees that you will not be hit with a lot of computer cleanup just to get one excellent program.
ATR

I just purchased Final Cut Pro X and I want to burn a dvd but the tabs do not see the option of SHARE. Is there something wrong with my Final Cut Pro X?

I just purchased Final Cut Pro X and I want to burn a dvd but the tabs do not see the option of SHARE. Is there something wrong with my Final Cut Pro X?

It's also under the File menu.

Screen flicker when copying to desktop

I am experiencing a sudden screen flicker when I copy files or folders to my desktop? Doesn't seem to affect the system in any way, just very annoying. Anyone else having this issue? Is there a fix for this?
Thanks, Rick

Step one is to log into a newly created admin user account and see if the problem persists.

Screen Flicker when swiping to home screen?

Has anyone noticed a screen flicker when swiping from page 2 to page 1 of apps? Happens every single time. It only flickers when arriving at page 1 from page 2 of apps, never in any other page or search screen.
I have a 16GB iPhone 4. Never saw this on a 3G iPhone with iOS 3.1.3

I got my iPhone 4 replaced 8-7-10 (3rd) iPhone 4. Yes I see that flicker as well. I'm extremely disappointed in apple. I had the iPhone 3G and got that phone replaced 4 times. Now I'm on my 3rd iPhone 4, why do the iPhones have so many problems? Whenever I go to an apple store I see tons of customers getting their iPhones replaced. We pay a lot of money for this phone and in the end the phone has problems which results in multiple replacements. We buy apps, movies, music, cases, batteries etc. Apple boasts about how great the iPhone is, I've yet to see that "great" iPhone.

FCPX: changing the resolution preferences when burning a dvd?

FCPX: How do you change the resolution preferences from 720 to 1080 when burning a dvd?

DVD standard is 720X480, which is why you don't have a resolution choice.
Russ

I'm using DVD Studio pro to burn a dvd but it won't let me cause I keep getting a "Formatting Failed" error message. It says "Formatting was not successful. Layer 0 exceeds max layer size allowed. Choose a suitable marker location." What does this mean?

I'm using DVD Studio pro to burn a dvd but it won't let me cause I keep getting a "Formatting Failed" error message. It says "Formatting was not successful. Layer 0 exceeds max layer size allowed. Choose a suitable marker location that will support this condition." What does this mean?
Kris

It means your file is too large to fit on a single layer disk.
Recompress to keep the overall size (audio,video and menus) below 4.5GB
x

Hello,I have done this successful in the past but on my IPad it shows I have 4 apps that need to be updated so when I hit the update tab all I get is a white screen. When I hit the purchase or other tabs it opens up. What could be the problem?

****,I have done this successful in the past but on my IPad it shows I have 4 apps that need to be updated so when I hit the update tab all I get is a white screen. When I hit the purchase or other tabs it opens up. What could be the problem?

There have been numerous reports on the forum today regarding this issue. It seems to be an issue at Apple, but no information has been posted on the status site.
http://www.apple.com/support/systemstatus/

Burned a dvd but, it will not play on my dvd player for tv

I created a slideshow with itunes music added in iphoto. I tried the recommended free "burn for mac" software download. It burned a dvd but, this will not play on my dvd player for tv. What software title can i purchase that will burn my iphoto slideshow to a dvd that will play on typical home dvd player for tv AND on a windows pc?

some dvd players are very picky on what they will play some only
play dvd+r some only dvd-r some can't play dvd+rw and or dvd-rw
dvd burnable is a pretty fragmented std.

Premiere - screen flicker when burning to DVD but no other formats

Similar Messages

Maybe you are looking for