Premiere video blocks do not stick

Hello,
Since i last updated my premiere pro cc, the video blocks on my sequence timeline do not "stick" anymore. This "sticking" used to happen when i dragged a video block near the end of another video block. I have searched through all of the settings, but I have not been able to find any settings regarding this.
This issue has been very annoying for me, since this feature is very important for fast editing work.
Thanks in advance for any answer,
Jasper

snap?

Similar Messages

Installed Premiere Pro CS4 but video display does not work?

I just got my copy of CS$. After installing Premiere I found two things that seem very wrong:
1) video display does not work, not even the little playback viewer next to improted film clips located on the project / sequence window. Audio works fine.
2) the UI is way too slow for my big beefy system.
My pc is a dual boot Vista-32 and XP system with 4GB of memory installed and nvidia geforce 280 graphics board with plenty of GPU power. The CS4 is installed on the Vista-32 partition. My windows XP partition on the same PC with Premiere CS2 works great and real fast.
Any ideas how to solve this CS4 install issue?
Ron

I would like to thank Dan, Hunt, and Haram:
The problem is now very clear to me. The problem only shows up with video footage imported into PP CS4 encoded with "MS Video 1" codec. So this seems to be a bug. The codec is very clearly called out and supported within various menues but video with this codec just will not play in any monitor or preview window. In addition the entire product looks horrible with respect to performance while PP CS4 trys its best to play the video. Audio will start playing after about 30 seconds. And once in awhile part of video shows up at the wrong magnification before blanking out again.
My suggestion to the Adobe team: fix the bug and add some sample footage to the next release so new installations can test their systems with known footage.
My PC is brand new with the following "beefy" components:
Motherboard
nForce 790i SLI FTW
Features:
3x PCI Express x16 graphics support
PCI Express 2.0
NVIDIA SLI-Ready (requires multiple NVIDIA GeForce GPUs)
DDR3-2000 SLI-Ready memory w/ ERP 2.0 (requires select third party system memory)
Overclocking tools
NVIDIA MediaSheild w/ 9 SATA 3 Gb/sec ports
ESA Certified
NVIDIA DualNet and FirstPacket Ethernet technology
Registered
CPU: Intel Core 2 Quad Q9550
S-Spec: SLAWQ
Ver: E36105-001
Product Code: BX80569Q9550
Made in Malaysia
Pack Date: 09/04/08
Features:
Freq.: 2.83 GHz
L2 Cache: 12 MHz Cache
FSB: 1333 MHz (MT/s)
Core: 45nm
Code named: Yorkfield
Power:95W
Socket: LGA775
Cooling: Liquid Cooled
NVIDIAGeForce GTX 280 SC graphics card
Features:
1 GB of onboard memory
Full Microsoft DirectX 10
NVIDIA 2-way and 3-way SLI Ready
NVIDIA PureVideo HD technology
NVIDIA PhysX Ready
NVIDI CUDA technology
PCI Express 2.0 support
Dual-link HDCP
OpenGL 2.1 Capaple
Output: DVI (2 dual-link), HDTV
Western Digital
2 WD VelociRaptor 300 GB SATA Hard Drives configured as Raid 0
Features:
10,000 RPM, 3 Gb/sec transfer rate
RAM Memory , Corsair 4 GB (2 x 2 GB) 1333 MHz DDR3
p/n: TW3X4G1333C9DHX G
product: CM3X2048-1333C9DHX
Features:
XMS3 DHX Dual-Path 'heat xchange'
2048 x 2 MB
1333 MHz
Latency 9-9-9-24-2T
1.6V ver3.2

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

haben
From looking at the specifications of your camera (SJCam 4000), we know already what video compression your camera is using. It is H.264.
A H.264.mov file should be supported by Premiere Elements 11. On what computer operating system is your Premiere Elements 11 running?
Do you have the latest version of QuickTime installed on your computer? And, are you running QuickTime and Premiere Elements 11 from a
User Account with administrative privileges? Please go to Premiere Elements 11 Publish+Share/Computer/QuickTime to confirm that you find
presets there for the QuickTime choice there.
What are the properties of these H.264.mov files - is it 1080p30 (1920 x 1080p30) or something else? Do you know if this camera is recording with a variable or
a constant frame rate?
Please review and consider and then we will decide what next.
Thank you.
ATR

Adobe Premiere Elements 13, will not display video picture, audio only. My video format is listed as compatible with Adobe.

Adobe Premiere Elements 13, will not display video picture, audio only. My videois listed as compatible with Adobe.

douglass
On what computer operating system is your Premiere Elements 13 running? Have you updated 13 to 13.1 yet using an opened project's Help Menu/Updates?
If not, please do so.
You have not given us enough information with which to help you.
What are the properties of your source file that is presenting in the project with audio but no video?
Quickest way to gain that information is from brand/model/settings of the camera that recorded the video.
I am looking for
video compression
audio compression
frame size
frame rate
interlaced or progressive
file extension
pixel aspect ratio
What does the file's thumbnail look like in Project Assets after it is imported....thumbnail with no image (gray), thumbnail with only an audio icon
within it, or other? On the Timeline, what do you see represented in Video 1....nothing as opposed to Audio 1 where you see the audio portion of
the file?
Do you have the latest version of QuickTime installed on your computer along with Premiere Elements 13/13.1? Are you running the programs as
administrator?
Is your video card/graphics card driver version up to date according to the web site of the manufacturer of the card?
Let us start here. Based on your reply details, we will customize troubleshooting strategy for you.
Thanks.
ATR

Premiere Elements 13 issue with the mouse on When I select a clip of video and move to a different place in my time line, Premiere Elements 13, will not release the clip rom the mouse. The clip follows my mouse movements and goes to other places in my

Premiere Elements 13 issue with the mouse on MAC OSX Yosemite 10.10.1
When I select a clip of video and move to a different place in my time line, Premiere Elements 13, will not release the clip from the mouse.
The clip follows my mouse movements and goes to other places in my time line.
I try to delete these extra insertions, but the mouse will not release the clip.
Action I’ve taken: I’ve re-installed Premiere Elements 13. Problem remains.
This issue has consumed too much of my time and does not go away. It ruins my video.
Help please.
Thanks

I tried using the Guest Account on my Mac. In the Guest Account, Illustrator works perfect!
Then I started wondering what processes (tools/tweaks) I run by default on my account. Turned out the problem was called by a little background tool called RightZoom. RightZoom let's the green 'zoom' button always maximize your current window.
So thanks! Problem solved!

Premiere Elements V4 does Not Support Matrox Parhelia 128mb Vid Crd - What video card should I get?

Premiere Elements V4 does not support Matrox Parhelia 128bm Video Card. Is there a recommended card that will work?
I have an Asus P2B Mother Board. Many thanks for any feedback.

Welcome to the forum.
About any current card, with good driver support, should work fine. The amount of VRAM is not that important, but I would go with ~ 1GB. The driver support is the main factor.
I am running PrE 4.0 and PrPro CS 2 Production Studio on my laptop w/ an nVidia GeForce 8800M GTX - 512GB VRAM, with no issues. That card/chip is a bit old now, and obviously the VRAM is less, than I mentioned, but to "future-proof" the computer a bit, the ~ 1GB VRAM would possibly help.
Good luck,
Hunt

Premiere elements 11 will not let me import and photo's or video. None of my hard drives are shown

premiere elements 11 will not let me import and photo's or video. None of my hard drives are shown

This is what I am getting
[img]http://beakertrooper.smugmug.com/Other/****/i-mS9Njbj/0/M/Screen%20Shot%202013-04-19% 20at%201.34.21%20PM-M.jpg[/img][/url]
Then
][img]http://beakertrooper.smugmug.com/Other/****/i-Z39dq7w/0/M/Screen%20Shot%202013-04-19%20at% 201.34.47%20PM-M.jpg[/img][/url]
But if I have my Ipod Touch pluged in it will show up as the only hard drive

Premiere Elements not allowing me to edit photos. I am not interested in videos. Also not opening photos from other sources. Windows 8 computer

I have many photos in my files and computers; most of them are visible in Premiere elements Organizer, but I can't edit them or pull out individual ones. Often cannot open a photos that comes in an email. I don't use videos; I just want to edit my photos.
Did I buy the wrong program?

Hi
Premiere Elements is a video editor not a photo editor. This is why you cannot edit your photos.
The organiser is for both Photoshop (photographic editor) and Premiere (video editor) elements. This is for managing your photo and video library.
I hope this helps.

I can not watch videos blocked plug-in keeps popping out

i can not watch videos blocked plug-in keeps popping out

Hi there alfg37,
It sounds like you may need to update your verision of Adobe Flash Player. Take a look at the article below for more information.
Adobe Flash Player updates available for OS X on October 24, 2014
-Griff W.

Adobe premiere Elements 12 will not open editor

I had Adobe Premiere Elements 11 on my laptop and worked fine. Decided to upgrade to Elements 12 and did but version 12 will not open editor, says sign in, I sign in but no editor. Organizer opens and loaded my Photos and videos. I purchased full retail version for download. My laptop runs windows 8.1 and has an Intel Core i5 dual core processor and 4GB ram.

actll
Have you gone to Computer/Manager/Event Viewer/Windows Logs/Applications and looked for error entries that appear to be associated with this problem?
Did you purchase Photoshop Elements 12 as well as Premiere Elements 12, and does Photoshop Elements 12 Full Editor open whereas Premiere Elements 12 will not open to its Expert or Quick workspaces?
You have probably tried it, but can you open to the Premiere Elements workspaces from the Elements Organizer workspace?
More later.
ATR

Premiere Elements 12 will not run after installing on my HP laptop with Windows 7.

Premiere Elements 12 will not run after installing on my HP laptop with Windows 7. HOWEVER, PE11, PE10 & PE 9 all run without a problem. I contacted HP, and there are NO NEW or ADDITIONAL video drivers available from HP.
I have NEVER had a problem running ANY software on this laptop -- except for PREMIERE ELEMENTS 12!

Premiere Elements 12 will not run after installing on my HP laptop with Windows 7. HOWEVER, PE11, PE10 & PE 9 all run without a problem. I contacted HP, and there are NO NEW or ADDITIONAL video drivers available from HP.
I have NEVER had a problem running ANY software on this laptop -- except for PREMIERE ELEMENTS 12!

Dvd burned in premiere pro cc does not fill the screen. Desire a 4:3 aspect ratio

I am using premiere pro cc. I burned a dvd several times,trying different presets. On each occasion the dvd never fills the screen. It does not lool like letterbox ( 16 x 9 ). There is space all around the picture / video. Need assistance fast,project is already late.Thanks in advance.
Theo Smith

I sent the screenshot via an e-mail attachment. I wasn't aware that
attachments could not be forwarded this way. I will send it again. First time
I've utilized this service.
In a message dated 3/8/2015 10:15:23 A.M. Eastern Daylight Time,
[email protected] writes:
Dvd burned in premiere pro cc does not fill the screen. Desire a 4:3
aspect ratio
created by Peru Bob (https://forums.adobe.com/people/Peru+Bob) in Adobe
Media Encoder (AME) - View the full discussion
(https://forums.adobe.com/message/7264779#7264779)

Premiere elements 11- PitchShifter not working?

Pitch shifter in Premiere elements 11 is not working as good as it was in Premiere elements 7. Here's some of my issues:
When I change the pitch, the end of the audio is cut off/out of sync
When a clip is short, the audio won't play if it has the pitch shifter effect
When I split a clip with pitch shifter applied, the audio skips
I would like it if the pitchshifter would be more like the one that was in premiere elements 7.

Two questions... does your project match your video?
Importing Video http://forums.adobe.com/thread/1065281
-and project settings http://forums.adobe.com/thread/1112086
And, just what are you editing?
Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
For Mac http://mediainspector.massanti.com/

Adobe Premiere Elements 12 Is Not Opening (Need Help ASAP)

Hello,
I tried to start up the program and it won't start. Previously, I would have the problem of my software not starting when I clicked on the icon. I found a way to get around that, but now it isn't starting at all. I tried uninstalling and reinstalling the program and nothing has changed. All I get now is a pop-up box that says that the program has stopped working. I really don't know what to do!
Computer Information:
Windows Edition : Windows Vista Home Premium 2007
Computer Type: Sony Vaio
Processor: Intel(R) Pentium(R) Dual CPU T3200 @2.00GHz
Memory (RAM): 3.00GB

taylor_peterson92
You realize that you are not using Premiere Elements 12/12.1 optimally on Windows Vista be it 32 or 64 bit. You still have a Premiere Elements 12/12.1 32 bit application which has computer resource issues when trying to get a larger project taken to completion successfully. With the 32 bit system, the maximum supported installed RAM = 4 GB, typically with 3.2 to 3.0 GB or less of that available. And, you appear to have only 3 GB RAM to start with.
It sounds like it may have worked before from what you wrote. How long ago did it work? And, what was your last activity in a project before you could no longer get the program to open. Are working with a home computer or is this computer part of a company network? In your present computer environment moving to Premiere Elements 13 is not a choice since Premiere Elements 13 does not support Windows Vista 32 or 64 bit.
You could go through the usual drill
a. Latest version of QuickTime installed on your computer with Premiere Elements 12/12.1?
b. Running program from a User Account with Administrative Privileges?
c. Video card/graphics card up to date according to web site of the manufacturer of the card?
d. Does problem exist with and without the antivirus and firewall(s) disabled?
e. Where do you have the Scratch Disks directed and how much free hard drive space is at that location?
f. Did you install the program to the default location on the Local Disk C?
What was your way of getting the program to work previously when problems developed?
Let us consider the above and then we can decide what next.
Thank you.
ATR

Is there a way to import ONLY videos into PE8, not photos?

I have a million photos I never intend to use in a Premiere Elements 8 production. Using the PE8 "Organizer," is there a way to import ONLY videos into PE8, not photos?

I do not use Organizer, so may be missing something, but I would guess that one could Sort By, and choose File Type. Remember, Organizer is for the system, and does not reflect what is Imported for use in a Project - two different things. In lieu of Organizer, I use Adobe Bridge, installed with some of my other Adobe programs.
I would also assume that Organizer does things via folders. If one does not have any aspect set to auto, I would think that it would ONLY do thumbnails for certain folders, as directed. If one has their stills in other folders, then only AV Assets would be seen by Organizer.
Maybe some Organizer guru will have better directions for you. I am just thinking here and speculating.
Good luck,
Hunt

Premiere video blocks do not stick

Similar Messages

Maybe you are looking for